8W-5595 CONSOLE GP-OPERATOR -TRANSMISSION DIRECTION, SPEED S/N 3GM202-UP PART OF 8W-6228 CHASSIS AR 160H NA



OPERATOR STATION
CONSOLE GP
CONTROL GP
CONTROL GP-STEERING
CONVERSION GP
DOOR GP

MOTOR GRADER 160H NA MOTOR GRADER 3GM
 160H Motor Grader 3GM00001-UP (MACHINE) POWERED BY 3306B Engine SEBP2489 160H NA 3GM   (1996)

OPERATOR STATION

CONSOLE GP
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8X-2330 CONSOLE GP-OPERATOR
 

#SEBP24890660
 

8W-5595: CONSOLE GP-OPERATOR

8W-5595 CONSOLE GP-OPERATOR -TRANSMISSION DIRECTION, SPEED
S/N 3GM202-UP
PART OF 8W-6228 CHASSIS AR
i01748429 SEBP2489
8W5595 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 143-9288 [1] COVER  
2. 143-9290 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
3. 198-7654 [1] PLATE AS  
  6V-9632 M [14] NUT-WELD (M6X1-THD)  
  7T-1099 [1] LINK  
  8D-3508 [2] BOSS (3/8-16X1-IN)  
5. 8X-5680 [1] FILM-PANEL (SHIFT PATTERN)  
6. 180-3531 C [1] CONTROL GP-TRANSMISSION  
7. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
8. 9X-2043 M [10] SCREW-TRUSS HEAD (M6X1X14-MM)  
9. 8X-4879 [2] BRACKET AS  
    (EACH INCLUDES)
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
10. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
11. 143-9286 [1] COVER  
12. 9X-2041 M [10] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
13. 8X-8096 [1] FILM-COVER  
15. 105-8681 [1] GATE AS  
16. 7M-0706 [1] KNOB  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP24890661
 

8X-2330: CONSOLE GP-OPERATOR

8X-2330 CONSOLE GP-OPERATOR
S/N 3GM1-UP
PART OF 8W-6228 CHASSIS AR
i00125498 SEBP2489
8X2330 CONSOLE GP-OPERATOR Parts scheme 8X2330 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 169-3676 [1] BASE  
2. 8X-1917 [1] CHANNEL AS  
3. 034-1994 [1] PIN  
4. 3B-4607 [2] PIN-COTTER  
5. 236-0737 [1] CYLINDER  
6. 6J-0488 [4] SCREW-BUTTON HEAD (3/8-16X0.875-IN)  
7. 8X-1921 [1] HOOD  
8. 8X-3789 [1] PANEL  
9. 2A-7184 [2] PLATE  
10. 8C-3442 [1] SPRING-COIL  
11. 2K-7979 [13] BUSHING  
12. 9X-2042 M [12] SCREW-TRUSS HEAD (M6X1X12-MM)  
13. 169-3679 [1] CHANNEL AS  
14. 8X-1908 [1] PANEL  
15. 8X-1911 [1] PANEL  
16. 8X-2160 [1] LEVER  
17. 8X-3951 [1] PANEL  
18. 5M-8500 [1] KNOB (STEERING WHEEL TILT)  
19. 123-1201 [1] PLATE  
20. 8D-7960 [2] PLATE  
21. 096-6166 [6] WASHER-HARD (4.5X9X1-MM THK)  
22. 3E-9865 [1] LOCKNUT (1/4-20-THD)  
23. 3Y-2806 [1] SPRING  
24. 8X-1904 [1] SPACER (20X35X26-MM THK)  
25. 6G-8814 [2] BRACKET  
26. 8X-1907 [1] SHAFT  
27. 8T-4133 M [1] NUT (M10X1.5-THD)  
28. 8T-2561 [11] WASHER-HARD (10.5X28.5X5-MM THK)  
29. 2G-8572 [8] WASHER-SPECIAL  
30. 2G-8573 [8] CAP  
31. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
32. 8X-5123 [1] RETAINER  
33. 8X-2161 [1] LEVER (COLUMN TILT)  
34. 9M-5590 [1] BALL  
35. 5C-8312 M [6] NUT (M4X0.7-THD)  
36. 110-6241 [1] BRACKET  
37. 206-4097 [8] FASTENER  
38. 8X-1913 [6] SPACER (10.5X32X19.5-MM THK)  
39. 3K-6060 [6] LOCKNUT (3/8-16-THD)  
40. 9X-1046 M [14] SCREW (M4X0.7X18-MM)  
41. 8X-2893 M [10] NUT (M4X0.7-THD)  
42. 031-2666 [1] ROD  
43. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
44. 8X-1914 [1] SHAFT  
46. 2K-5830 [2] BEARING AS-NEEDLE  
47. 206-9651 [1] PLATE  
48. 4L-6454 [4] BOLT (3/8-16X1-IN)  
49. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
50. 8X-3965 [1] RATCHET  
51. 3F-7514 [4] PIN  
52. 8T-9006 M [2] BOLT-SOCKET HEAD (M3X0.5X20-MM)  
53. 4B-4314 [1] RIVET  
54. 5S-7383 [6] BOLT (3/8-16X1.75-IN)  
55. 6G-2914 [1] LATCH  
56. 7I-4890 [1] PLATE AS  
57. 8L-7905 [2] RIVET-POP  
58. 8D-5641 B [14] BEARING  
59. 8T-1174 [4] SEAL-LIP TYPE  
60. 5P-5637 BD SEAL  
61. 030-8535 [1] BOLT-LOCKING (3/8-16X0.875-IN)  
62. 5P-5639 BD SEAL  
63. 174-8131 M [2] SCREW-TRUSS HEAD (M4X0.7X12-MM)  
64. 6L-1962 [1] NUT-JAM (3/8-24-THD)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP24890662
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH
S/N 3GM36-83
INCHING PEDAL
PART OF 8W-6228 CHASSIS AR
i00126212 SEBP2489
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 8X-2498 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 145-9077 [1] ROD  
18. 4J-8922 [2] ROD END (3/8-24-THD)  
19. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3K-8280 [1] PIN-CLEVIS  
22. 7V-0446 [2] CLIP  
23. 9X-5694 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [2] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [3] NUT (5/8-18-THD)  
29. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
30. 3D-4004 [1] SEAL-QUAD RING  
31. 133-9185 [1] ADAPTER  
32. 7M-8485 [1] SEAL-O-RING  
33. 7D-9212 [1] SPRING  
34. 6P-5442 [2] PLUG  
35. 136-5160 [1] COUPLER  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 8X-7665 [1] BRACKET  
40. 1D-1313 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 6J-1889 [1] SEAL-U-CUP  
44. 9J-8783 [1] SHIM (0.508-MM THK)  
45. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP24890663
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH
S/N 3GM84-91
INCHING PEDAL
PART OF 8W-6228 CHASSIS AR
i01091928 SEBP2489
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 8X-2498 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 145-9077 [1] ROD  
18. 4J-8922 [2] ROD END (3/8-24-THD)  
19. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3H-8538 C [1] PIN  
22. 7V-0446 [2] CLIP  
23. 144-5323 C [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 C [1] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 C [2] NUT (5/8-18-THD)  
29. 8T-4122 C [1] WASHER-HARD (17X32X3.5-MM THK)  
30. 5D-6539 C [1] SEAL-O-RING  
31. 9X-6578 C [1] NUT-FACE SEAL (1-11/16-12-THD)  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 147-7238 C [1] BRACKET  
40. 149-2065 C [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 8T-4896 C [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 9J-8783 [1] SHIM (0.508-MM THK)  
45. 9G-9154 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP24890664
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH
S/N 3GM92-208
INCHING PEDAL
PART OF 8W-6228 CHASSIS AR
i01451582 SEBP2489
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 207-4922 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 169-0922 C [1] ROD  
18. 4J-8922 C [1] ROD END (3/8-24-THD)  
19. 6V-8183 C [1] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3H-8538 [1] PIN  
22. 7V-0446 [2] CLIP  
23. 144-5323 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [1] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [2] NUT (5/8-18-THD)  
29. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
30. 5D-6539 [1] SEAL-O-RING  
31. 9X-6578 [1] NUT-FACE SEAL (1-11/16-12-THD)  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 147-7238 [1] BRACKET  
40. 149-2065 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 9J-8783 [1] SHIM (0.508-MM THK)  
45. 9G-9154 [1] CLIP  
46. 169-0921 C [1] ROD END (3/8-24 LH-THD)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP24890665
 

7I-4718: CONTROL GP-STEERING

7I-4718 CONTROL GP-STEERING
S/N 3GM1-UP
PART OF 8W-6228 CHASSIS AR
i00125339 SEBP2489
7I4718 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 102-1501 Y [1] PUMP GP-METERING (HMU)  
2. 384-5820 [1] WHEEL AS  
3. 144-6695 [1] NUT (13/16-20-THD)  
4. 6V-7692 [4] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24890666
 

8X-4153: CONVERSION AR-NON-ROPS

8X-4153 CONVERSION AR-NON-ROPS
S/N 3GM1-UP
AN ATTACHMENT
i00999233 SEBP2489
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
  8X-4154 Y [1] GUARD GP-PLATFORM  
  5P-8502 [1] PADLOCK GP  
  5P-8500 A [1] KEY  
  8Y-6364 A [1] SLEEVE  
  122-9575 Y [1] PANEL GP-CAB  
  3V-4694 [1] PLUG-BUTTON  
  9D-3767 [1] PLUG-BUTTON  
  8Y-4951 Y [1] SEAT GP-SUSPENSION  
  A   NOT PART OF THIS GROUP
  Y   SEPARATE ILLUSTRATION
 

#SEBP24890667
 

266-7031: DOOR GP-CAB

266-7031 DOOR GP-CAB
S/N 3GM1-UP
Type 1
i06093095 SEBP2489
2667031 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 4J-3915 B [4] SHIM (1.52-MM THK)  
2. 5T-7486 [1] RETAINER-SPRING  
3. 6D-6581 [14] RIVET-POP  
4. 6V-2773 [2] PLUG  
5. 6V-7636 [4] PIN AS-SPRING  
6. 8X-4066 [1] HINGE  
8. 8X-4262 [1] COVER (RH)  
11. 8Y-4398 [1] LINK-CONNECTING  
12. 8Y-4620 [1] LINK-CONNECTING  
13. 8Y-4801 [1] LOCK AS-CYLINDER  
  226-0295 [1] LOCK AS  
  226-0342 [1] CAM  
14. 8Y-6385 [1] SHIELD-STRIKER  
15. 9X-2546 M [4] BOLT (M6X1X20-MM)  
16. 106-6553 [2] BUMPER-CONICAL  
17. 107-9641 [1] PLATE AS  
18. 108-5950 [1] LATCH AS  
19. 108-5952 [1] LINK (RH)  
20. 114-9190 [1] SEAL  
21. 117-1963 [1] PLATE AS  
22. 128-0037 [1] KNOB-BALL  
23. 199-2677 [1] LINK (RELEASE)  
24. 199-2712 [1] HANDLE  
25. 282-8470 [1] DOOR AS-ACCESS (RH)  
  6V-9632 M [10] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
26. 282-9436 [1] SPACER  
27. 282-9437 [1] PLATE  
28. 8Y-4400 [1] LATCH AS-DOOR  
29. 296-4298 [1] HANDLE AS-DOOR (OUTSIDE)  
30. 296-4303 [1] HANDLE AS-DOOR (INSIDE)  
31. 1H-3338 [1] LOCKWASHER (EXTERNAL TOOTH)  
32. 230-8993 M [2] SCREW-FLAT HEAD (M6X1X12-MM)  
33. 321-5918 [1] PLUG-BUTTON  
34. 8C-8454 M [14] SCREW-MACHINE (M6X1X20-MM)  
35. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [2] NUT (M10X1.5-THD)  
37. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
38. 8T-4157 [1] STRIKER AS  
  8T-4158 [1] WASHER-SPECIAL  
39. 8T-4181 M [6] BOLT (M6X1X20-MM)  
40. 8X-4245 M [1] BOSS (M6X1X18-MM)  
41. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
42. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
43. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
44. 5P-5969 D SEAL (1.5-M)  
45. 5P-5768 D SEAL (2.4-M)  
45A. 5P-5768 D SEAL (2.8-M)  
46. 122-2228 E SEAL (172-CM)  
47. 178-8894 E SEAL (340-CM)  
48. 308-2025 [1] COVER (RH)  
49. 308-7592 [1] GLASS  
50. 308-7593 [1] GLASS  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP24890668
 

266-7031: DOOR GP-CAB

266-7031 DOOR GP-CAB
S/N 3GM1-UP
Type 2
i06093090 SEBP2489
2667031 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 4J-3915 B [4] SHIM (1.52-MM THK)  
2. 5T-7486 [1] RETAINER-SPRING  
4. 6V-2773 C [2] PLUG  
5. 6V-7636 [4] PIN AS-SPRING  
8. 487-5655 [1] COVER (RH)  
11. 8Y-4398 [1] LINK-CONNECTING  
12. 8Y-4620 [1] LINK-CONNECTING  
13. 8Y-4801 [1] LOCK AS-CYLINDER  
  226-0295 J [1] LOCK AS  
  226-0342 [1] CAM  
14. 8Y-6385 [1] SHIELD-STRIKER  
15. 9X-2546 M [4] BOLT (M6X1X20-MM)  
16. 106-6553 [2] BUMPER-CONICAL  
17. 107-9641 [1] PLATE AS  
18. 108-5950 [1] LATCH AS  
19. 108-5952 [1] LINK (RH)  
20. 114-9190 [1] SEAL  
21. 117-1963 [1] PLATE AS  
22. 128-0037 [1] KNOB-BALL  
23. 199-2677 [1] LINK (RELEASE)  
24. 199-2712 [1] HANDLE  
25. 487-6629 [1] DOOR AS-CAB  
  6D-6581 [14] RIVET-POP  
  8X-4066 [1] HINGE  
27. 282-9437 [1] PLATE  
28. 8Y-4400 [1] LATCH AS-DOOR  
29. 296-4298 [1] HANDLE AS-DOOR (OUTSIDE)  
  3V-4694 [2] PLUG-BUTTON  
30. 296-4303 [1] HANDLE AS-DOOR (INSIDE)  
31. 1H-3338 [1] LOCKWASHER (EXTERNAL TOOTH)  
32. 230-8993 M [2] SCREW-FLAT HEAD (M6X1X12-MM)  
33. 321-5918 C [1] PLUG-BUTTON  
34. 8C-8454 M [14] SCREW-MACHINE (M6X1X20-MM)  
35. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [2] NUT (M10X1.5-THD)  
37. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
38. 8T-4157 [1] STRIKER AS  
  8T-4158 [1] WASHER-SPECIAL  
39. 8T-4181 M [6] BOLT (M6X1X20-MM)  
40. 8X-4245 M [1] BOSS (M6X1X18-MM)  
41. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
42. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
43. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
44. 5P-5969 CD SEAL (3-M)  
45. 5P-5768 CD SEAL (2.5-M)  
45A. 5P-5768 CD SEAL (2.8-M)  
46. 122-2228 E SEAL (148-CM)  
47. 178-8894 E SEAL (305-CM)  
48. 308-2025 [1] COVER (RH)  
49. 308-7592 [1] GLASS (LOWER)  
50. 308-7593 [1] GLASS (UPPER)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP24890669
 

8X-4317: DOOR GP-CAB

8X-4317 DOOR GP-CAB -HIGH PROFILE-RH
S/N 3GM1-UP
PART OF 8X-4413 DOOR GP-CAB
AN ATTACHMENT
i00125525 SEBP2489
8X4317 DOOR GP-CAB Parts scheme 8X4317 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 160H NA MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 199-2677 [1] LINK (RELEASE)  
2. 1H-3338 [1] LOCKWASHER (EXTERNAL TOOTH)  
3. 5T-7486 [1] RETAINER-SPRING  
4. 6D-6581 [16] RIVET-POP  
5. 6V-2773 [2] PLUG  
6. 6V-7636 [4] PIN AS-SPRING  
7. 8X-3806 [1] HINGE  
8. 8X-4243 [1] COVER (RH)  
9. 8X-4262 [1] COVER (RH)  
10. 8X-3938 [1] GLASS (UPPER)  
11. 8X-4448 [1] GLASS (LOWER)  
12. 8Y-4398 [1] LINK-CONNECTING  
13. 8Y-4400 [1] LATCH AS-DOOR  
14. 8Y-4401 [1] HANDLE AS (INSIDE)  
15. 8Y-4619 [1] HANDLE AS (OUTSIDE)  
16. 8Y-4620 [1] LINK-CONNECTING  
17. 8Y-4801 J [1] LOCK AS-CYLINDER  
  226-0295 [1] LOCK AS  
  226-0342 [1] CAM  
18. 9X-2546 M [4] BOLT (M6X1X20-MM)  
19. 107-9641 [1] PLATE AS  
20. 108-5950 [1] LATCH AS  
21. 108-5952 [1] LINK (RH)  
22. 114-9190 [1] SEAL  
23. 128-0037 [1] KNOB-BALL  
24. 199-2712 [1] HANDLE  
25. 199-2739 [1] DOOR AS (RH)(HIGH PROFILE)  
  6V-9632 M [8] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
26. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
28. 8T-4181 M [6] BOLT (M6X1X20-MM)  
29. 8X-4245 M [1] BOSS (M6X1X18-MM)  
30. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
31. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
32. 5P-5768 D SEAL (2.9-M)  
32A. 5P-5768 D SEAL (2.7-M)  
33. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
  D   ORDER BY THE METER
  J   REQUIRES 5P8500 KEY
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 160H NA :

CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONDENSER & MTG GP-REFRIGERANT
8W-6333 CONDENSER & MTG GP-REFRIGERANT
CONDENSER & MTG GP-REFRIGERANT
8W-6333 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
7E-6461 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
3E-1906 COMPRESSOR GP-REFRIGERANT
CANOPY GP
130-2886 CANOPY GP
129-7231 CANOPY AR
CONSOLE GP-OPERATOR
8X-2330 CONSOLE GP-OPERATOR
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-STEERING
7I-4718 CONTROL GP-STEERING
8X-4153 CONVERSION AR-NON-ROPS
DOOR GP-CAB
266-7031 DOOR GP-CAB
DOOR GP-CAB
266-7031 DOOR GP-CAB

Truck sale:

Caterpillar 160HNA, Construction
59,125 
Caterpillar 160HNA, Construction
- motor graders
TOROMONT CAT
Canada
Caterpillar 160HNA, Construction
 
Caterpillar 160HNA, Construction
- motor graders
MANTRAC NIGERIA LIMITED
Nigeria
CATERPILLAR 160HNA 1995
 
CATERPILLAR 160HNA 1995
- MOTOR GRADERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR 160HNA 2005
 
CATERPILLAR 160HNA 2005
- MOTOR GRADERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR 160HNA 2007
 
CATERPILLAR 160HNA 2007
- MOTOR GRADERS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber