POWER TRAIN
CONTROL GP-TRANSMISSION HYDCOOLER GP
COUPLING GP
DIFFERENTIAL & BEVEL GEAR GP
POWER TRAIN
CONTROL GP-TRANSMISSION HYD
#SEBP24900250
281-3159: CONTROL GP-TRANSMISSION HYD
281-3159 CONTROL GP-TRANSMISSION HYD
S/N DBM645-UP
PART OF 144-2232 TRANSMISSION AR
S/N DBM645-UP
PART OF 144-2232 TRANSMISSION AR
For full view, you need register
Parts for your 160H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 281-3157 Y | [1] | VALVE GP-TRANSMISSION CONTROL | |
| 2. | 6V-3918 M | [5] | BOLT (M8X1.25X50-MM) | |
| 3. | 9P-9150 | [66] | WASHER (8.25X18X0.84-MM THK) | |
| 4. | 1T-0738 | [33] | WASHER (8.4X19X1.83-MM THK) | |
| 5. | 8C-4984 M | [14] | BOLT (M8X1.25X150-MM) | |
| 6. | 3E-8005 M | [14] | BOLT (M8X1.25X160-MM) | |
| 7. | 4S-5879 | [1] | SEAL-O-RING | |
| 8. | 147-1771 | [1] | HARNESS AS-TRANSMISSION | |
| 3S-2093 | [7] | STRAP-CABLE | ||
| 137-1120 | [1] | HARNESS AS-TRANSMISSION | ||
| 9. | 8T-0639 M | [3] | BOLT (M6X1X12-MM) | |
| 10. | 173-7252 | [1] | SWITCH AS-PRESSURE (TRANSMISSION MODULATION) | |
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-9737 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 11. | 144-2231 | [1] | CLIP | |
| 12. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 13. | 6V-5217 M | [3] | BOLT (M8X1.25X20-MM) | |
| 14. | 3J-1907 | [2] | SEAL-O-RING | |
| 15. | 6V-0484 | [1] | ELBOW | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24900251
6Y-7821: CONTROL GP-TRANSMISSION HYD
6Y-7821 CONTROL GP-TRANSMISSION HYD
S/N 7JX800-99999
PART OF 9W-5126 TRANSMISSION AR
S/N 7JX800-99999
PART OF 9W-5126 TRANSMISSION AR
For full view, you need register
Parts for your 160H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-7822 Y | [1] | CONTROL GP-TRANSMISSION HYD | |
| 2. | 6V-3918 M | [5] | BOLT (M8X1.25X50-MM) | |
| 3. | 9P-9150 | [66] | WASHER (8.25X18X0.84-MM THK) | |
| 4. | 1T-0738 | [33] | WASHER (8.4X19X1.83-MM THK) | |
| 5. | 8C-4984 M | [14] | BOLT (M8X1.25X150-MM) | |
| 6. | 3E-8005 M | [14] | BOLT (M8X1.25X160-MM) | |
| 7. | 4S-5879 | [1] | SEAL-O-RING | |
| 8. | 9U-9312 | [1] | HARNESS AS-SOLENOID | |
| 9. | 8T-0639 M | [3] | BOLT (M6X1X12-MM) | |
| 10. | 111-7088 | [1] | SWITCH AS-PRESSURE (INCHING) | |
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-9738 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 11. | 9G-9150 | [1] | CLIP | |
| 12. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 13. | 6V-5217 M | [3] | BOLT (M8X1.25X20-MM) | |
| 14. | 3J-1907 | [2] | SEAL-O-RING | |
| 15. | 6V-0484 | [1] | ELBOW | |
| 16. | 149-8292 | [1] | SWITCH AS-TEMPERATURE (TRANSMISSION OIL) | |
| 17. | 3K-0360 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24900252
6Y-7822: CONTROL GP-TRANSMISSION HYD
6Y-7822 CONTROL GP-TRANSMISSION HYD
S/N 7JX800-99999
PART OF 6Y-7821 CONTROL GP-TRANSMISSION HYD
S/N 7JX800-99999
PART OF 6Y-7821 CONTROL GP-TRANSMISSION HYD
For full view, you need register
Parts for your 160H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-7823 Y | [1] | VALVE GP-SELECTOR & PRESS CONT (TRANSMISSION) | |
| 2. | 8E-9476 | [1] | PLATE | |
| 3. | 6Y-7824 Y | [1] | VALVE GP-SELECTOR & PRESS CONT (TRANSMISSION) | |
| 4. | 110-5161 | [1] | MANIFOLD | |
| 5. | 8E-9478 | [1] | PLATE | |
| 6. | 8E-9474 | [1] | COVER | |
| 7. | 6I-9395 | [1] | SCREEN (TRANSMISSION) | |
| 8. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 9. | 6V-3965 | [8] | FITTING (QUICK DISCONNECT) | |
| 10. | 3J-1907 | [9] | SEAL-O-RING | |
| 11. | 6V-0852 | [8] | CAP-DUST | |
| 12. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
| 13. | 6I-8823 | [1] | PLATE-SOLENOID CHART | |
| 14. | 1T-0738 | [2] | WASHER (8.4X19X1.83-MM THK) | |
| 15. | 9P-9150 | [4] | WASHER (8.25X18X0.84-MM THK) | |
| 16. | 3E-8006 M | [2] | BOLT (M8X1.25X130-MM) | |
| 17. | 3J-6956 | [1] | SPRING | |
| 18. | 9L-9068 | [6] | DOWEL | |
| 19. | 8F-6230 | [1] | SEAL-O-RING | |
| 20. | 4D-6695 | [4] | SEAL-O-RING | |
| 21. | 6Y-4978 | [1] | POPPET | |
| 22. | 4D-1322 | [1] | RING-RETAINING | |
| 23. | 6Y-2584 | [1] | RETAINER | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24900253
4W-5974: COOLER GP-TRANSMISSION OIL
4W-5974 COOLER GP-TRANSMISSION OIL
S/N 6NC1-33951; 8TD10000-99999; R6J1-UP; 10Z1-UP
PART OF 130-7111, 131-6788 ENGINE AR, 269-6940 ENGINE AR-COMPLETE
S/N 6NC1-33951; 8TD10000-99999; R6J1-UP; 10Z1-UP
PART OF 130-7111, 131-6788 ENGINE AR, 269-6940 ENGINE AR-COMPLETE
For full view, you need register
#SEBP24900254
8E-3366: COUPLING GP-TORSIONAL
8E-3366 COUPLING GP-TORSIONAL
S/N 2FM1-UP
DRIVE
PART OF 112-4123 POWER TRAIN AR
S/N 2FM1-UP
DRIVE
PART OF 112-4123 POWER TRAIN AR
For full view, you need register
#SEBP24900255
8W-5430: DIFFERENTIAL & BEVEL GEAR GP
8W-5430 DIFFERENTIAL & BEVEL GEAR GP
S/N 2FM1-484
PART OF 115-0630 DIFFERENTIAL AR
AN ATTACHMENT
S/N 2FM1-484
PART OF 115-0630 DIFFERENTIAL AR
AN ATTACHMENT
For full view, you need register
Parts for your 160H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5D-9844 | [1] | BOLT-LOCKING (3/8-16X2-IN) | |
| 2. | 5P-8247 | [20] | WASHER-HARD (17X32X3.5-MM THK) | |
| 3. | 034-3557 | [5] | BOLT-LOCKING (3/8-16X1.125-IN) | |
| 4. | 5M-2894 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5. | 2K-5109 | [1] | GASKET | |
| 6. | 8W-5279 | [1] | RETAINER | |
| 7. | 5K-2595 | [1] | SEAL-LIP TYPE | |
| 8. | 8T-8883 | [1] | SEAL-O-RING | |
| 9. | 5P-5813 | [1] | LOCKNUT-BEARING (2.75X18-THD) | |
| 10. | 9B-0143 | [1] | LOCKWASHER | |
| 11. | 7D-8347 | [1] | WASHER-TAB | |
| 12. | 8X-2534 | [1] | HOUSING | |
| 13. | 5L-2031 | [1] | CUP-BEARING | |
| 14. | 5L-2030 | [1] | CONE-BEARING | |
| 15. | 9X-8880 | [8] | BOLT (5/8-11X2-IN) | |
| 16. | 2K-5106 | [1] | SHIM (2.54-MM THK) | |
| 17. | 4K-0367 | [12] | NUT-FULL (5/8-11-THD) | |
| 18. | 4H-6520 | [1] | SEAL-O-RING | |
| 19. | 1J-4757 | [1] | CONE-BEARING | |
| 20. | 1J-2860 | [1] | CUP-BEARING | |
| 21. | 8D-8197 | [1] | CAGE | |
| 22. | 6G-4703 | NUT (5 1/4-12-THD) | ||
| 23. | 126-2729 | [1] | CONE-SPECIAL TAPERED | |
| 24. | 5P-2503 | [1] | CUP-BEARING | |
| 25. | 6F-0698 | [1] | DOWEL | |
| 26. | 8D-9784 | [2] | LOCK | |
| 27. | 030-8535 | [2] | BOLT-LOCKING (3/8-16X0.875-IN) | |
| 28. | 8X-2525 | [1] | CARRIER AS | |
| 29. | 0S-1756 | [4] | BOLT (3/4-10X4.25-IN) | |
| 30. | 5P-8248 | [4] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 31. | 4D-5292 | [1] | RING-RETAINING | |
| 32. | 1P-2662 | [1] | CONE-BEARING | |
| 33. | 1P-2636 | [1] | CUP-BEARING | |
| 34. | 6G-4701 | [1] | NUT-BEARING (4-1/4-12-THD) | |
| 35. | 8X-2308 | [1] | CAGE AS | |
| 2D-6642 | [1] | BALL | ||
| 36. | 2H-5001 | SEAL-O-RING | ||
| 37. | 8W-5111 | [1] | SLEEVE | |
| 38. | 154-2685 | [1] | SHAFT | |
| 40. | 9G-2991 | [2] | RING-SEAL | |
| 42. | 8W-5112 Y | [1] | DIFFERENTIAL GP | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24900256
8W-5430: DIFFERENTIAL & BEVEL GEAR GP
8W-5430 DIFFERENTIAL & BEVEL GEAR GP
S/N 2FM485-UP
PART OF 115-0630 DIFFERENTIAL AR
AN ATTACHMENT
S/N 2FM485-UP
PART OF 115-0630 DIFFERENTIAL AR
AN ATTACHMENT
For full view, you need register
Parts for your 160H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5D-9844 | [1] | BOLT-LOCKING (3/8-16X2-IN) | |
| 2. | 5P-8247 | [8] | WASHER-HARD (17X32X3.5-MM THK) | |
| 3. | 034-3557 | [5] | BOLT-LOCKING (3/8-16X1.125-IN) | |
| 4. | 5M-2894 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5. | 2K-5109 | [1] | GASKET | |
| 6. | 8W-5279 | [1] | RETAINER | |
| 7. | 123-4003 | [1] | SEAL-LIP TYPE | |
| 9. | 5P-5813 | [1] | LOCKNUT-BEARING (2.75X18-THD) | |
| 10. | 9B-0143 | [1] | LOCKWASHER | |
| 11. | 7D-8347 | [1] | WASHER-TAB | |
| 12. | 8X-2534 | [1] | HOUSING | |
| 13. | 5L-2031 | [1] | CUP-BEARING | |
| 14. | 5L-2030 | [1] | CONE-BEARING | |
| 15. | 9X-8880 | [8] | BOLT (5/8-11X2-IN) | |
| 16. | 2K-5106 | [1] | SHIM (2.54-MM THK) | |
| 17. | 340-4515 | [12] | NUT (5/8-11-THD) | |
| 18. | 4H-6520 | [1] | SEAL-O-RING | |
| 19. | 1J-4757 | [1] | CONE-BEARING | |
| 20. | 1J-2860 | [1] | CUP-BEARING | |
| 21. | 8D-8197 | [1] | CAGE | |
| 22. | 6G-4703 | [1] | NUT (5 1/4-12-THD) | |
| 23. | 126-2729 | [1] | CONE-SPECIAL TAPERED | |
| 24. | 5P-2503 | [1] | CUP-BEARING | |
| 25. | 6F-0698 | [1] | DOWEL | |
| 26. | 8D-9784 | [2] | LOCK | |
| 27. | 030-8535 | [2] | BOLT-LOCKING (3/8-16X0.875-IN) | |
| 28. | 154-2687 C | [1] | CARRIER AS | |
| 28A. | 0S-1756 | [4] | BOLT (3/4-10X4.25-IN) | |
| 28B. | 5P-8248 | [4] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 29. | 154-2688 CY | [1] | DIFFERENTIAL GP | |
| 30. | 9G-2991 | [2] | RING-SEAL | |
| 31. | 4D-5292 | [1] | RING-RETAINING | |
| 32. | 1P-2662 | [1] | CONE-BEARING | |
| 33. | 1P-2636 | [1] | CUP-BEARING | |
| 34. | 6G-4701 | [1] | NUT-BEARING (4-1/4-12-THD) | |
| 35. | 8X-2308 | [1] | CAGE AS | |
| 2D-6642 | [1] | BALL | ||
| 36. | 2H-5001 | [1] | SEAL-O-RING | |
| 37. | 8W-5111 | [1] | SLEEVE | |
| 38. | 169-1548 | [1] | SHAFT-PINION | |
| 39. | 8T-8883 | [1] | SEAL-O-RING | |
| 40. | 340-4517 | [12] | WASHER-HARD (17X32X3.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24900257
115-0630: DIFFERENTIAL AR
For full view, you need register
#SEBP24900258
154-2688: DIFFERENTIAL GP
154-2688 DIFFERENTIAL GP
S/N 2FM485-UP
PART OF 8W-5430 DIFFERENTIAL & BEVEL GEAR GP
AN ATTACHMENT
S/N 2FM485-UP
PART OF 8W-5430 DIFFERENTIAL & BEVEL GEAR GP
AN ATTACHMENT
For full view, you need register
Parts for your 160H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5T-9628 | [1] | PISTON | |
| 2. | 7D-8225 | [1] | SEAL-RING | |
| 3. | 7D-8226 | [1] | SEAL-RING | |
| 4. | 6Y-7954 | [7] | DISC-FRICTION | |
| 5. | 169-1549 | [1] | GEAR-BEVEL (54-TEETH) | |
| 6. | 8X-2528 | [1] | HOUSING AS | |
| 6A. | 2D-6642 | [1] | BALL | |
| 6C. | 3D-6509 | [2] | DOWEL | |
| 7. | 8X-4641 | [4] | SPACER-THRUST | |
| 8. | 155-2283 | [4] | PINION AS (14-TEETH) | |
| (EACH INCLUDES) | ||||
| 8A. | 174-6819 | [1] | BUSHING | |
| 9. | 154-2692 | [1] | HOUSING AS | |
| 9A. | 3D-6509 | [2] | DOWEL | |
| 0S-1573 | [12] | BOLT (1/2-13X4-IN) | ||
| 5P-8245 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 10. | 8D-4064 | [2] | WASHER-THRUST | |
| 11. | 109-4582 | [1] | GEAR-BEVEL (24-TEETH) | |
| 12. | 109-4583 | [1] | GEAR-BEVEL (24-TEETH) | |
| 13. | 8D-4282 | [1] | DISC (DIFFERENTIAL LOCK CLUTCH) | |
| 14. | 7D-8185 | [8] | DISC (DIFFERENTIAL LOCK CLUTCH) | |
| 15. | 2B-0947 | [12] | BOLT (1/2-13X2.25-IN) | |
| 16. | 5P-8245 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 5P-8247 | [24] | WASHER-HARD (17X32X3.5-MM THK) | |
| 18. | 5B-0841 | [24] | BOLT (5/8-18X1.75-IN) | |
| 19. | 154-2689 | [1] | SPIDER | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
#SEBP24900259
8W-5112: DIFFERENTIAL GP
8W-5112 DIFFERENTIAL GP
S/N 2FM1-484
PART OF 8W-5430 DIFFERENTIAL & BEVEL GEAR GP
AN ATTACHMENT
S/N 2FM1-484
PART OF 8W-5430 DIFFERENTIAL & BEVEL GEAR GP
AN ATTACHMENT
For full view, you need register
Parts for your 160H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5T-9628 | [1] | PISTON | |
| 2. | 7D-8225 | [1] | SEAL-RING | |
| 3. | 7D-8226 | [1] | SEAL-RING | |
| 4. | 6Y-7954 | [7] | DISC-FRICTION | |
| 5. | 155-2281 | [1] | SPIDER | |
| 6. | 8X-2528 | [1] | HOUSING AS | |
| 7. | 2D-6642 | [1] | BALL | |
| 8. | 3D-6509 | [2] | DOWEL | |
| 9. | 8X-4641 | [3] | SPACER-THRUST | |
| 10. | 155-2283 | [3] | PINION AS (14 TEETH) | |
| (EACH INCLUDES) | ||||
| 11. | 155-2285 | [1] | BUSHING | |
| 12. | 5P-8245 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 8D-4064 | [2] | WASHER-THRUST | |
| 14. | 2B-0947 | [12] | BOLT (1/2-13X2.25-IN) | |
| 15. | 8X-4556 | [1] | HOUSING AS | |
| 16. | 3D-6509 | [2] | DOWEL | |
| 17. | 109-4582 | [1] | GEAR-BEVEL (24-TEETH) | |
| 18. | 109-4583 | [1] | GEAR-BEVEL (24-TEETH) | |
| 19. | 8D-4282 | [1] | DISC | |
| 20. | 7D-8185 | [8] | DISC | |
| 21. | 5B-0841 | [24] | BOLT (5/8-18X1.75-IN) | |
| 22. | 5P-8247 | [24] | WASHER-HARD (17X32X3.5-MM THK) | |
| 23. | 142-5757 | [1] | GEAR-BEVEL (54-TEETH) | |
