IMPLEMENTS
DRAWBAR GPELECTRICAL AND STARTING SYSTEM
CONVERTER GP-ELECTRICALOPERATOR STATION
SEAT GPAIR CONDITIONER GP
IMPLEMENTS
DRAWBAR GP
#SEBP24910660
8X-1960: DRAWBAR GP
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-1322 | [4] | BOLT (7/8-9X6-IN) | |
| 2. | 6G-1915 B | [36] | SHIM (0.25-MM THK) | |
| 3. | 8X-7951 | [1] | DRAWBAR & YOKE AS | |
| 3A. | 5T-6775 | [2] | REINFORCEMENT | |
| 3B. | 178-3086 | [3] | STUD-BALL | |
| 3C. | 8X-7956 | [1] | SHAFT AS | |
| 3D. | 8F-9836 | [12] | BOSS (3/8-16-THD) | |
| 3E. | 123-7707 | [2] | PLATE | |
| 4. | 6G-5442 | [1] | BALL | |
| 5. | 8X-8406 | [1] | CAP | |
| 6. | 8X-8409 B | [4] | SHIM (0.8-MM THK) | |
| 7. | 8X-8408 B | [6] | SHIM (0.25-MM THK) | |
| 8. | 8X-8407 | [1] | ADAPTER | |
| 9. | 5P-8291 | [5] | BOLT (3/4-16X2-IN) | |
| 10. | 2H-3764 | [2] | BOLT-SOCKET HEAD (1/4-20X1.5-IN) | |
| 11. | 9H-1031 | [4] | WASHER-HARD (24X41.5X6-MM THK) | |
| 12. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF)(DRAWBAR) | |
| 13. | 319-2228 | [6] | SHOE-CIRCLE GUIDE | |
| 14. | 4B-3604 | [12] | SETSCREW-SQUARE HEAD (3/4-10X2.5-IN) | |
| 15. | 1D-5119 | [12] | NUT (3/4-10-THD) | |
| 16. | 6G-1914 B | [54] | SHIM (0.76-MM THK) | |
| 17. | 128-9654 | [11] | STRIP-WEAR | |
| 18. | 333-0960 | [6] | STRIP-WEAR | |
| 19. | 5P-6652 | [18] | WASHER (20X44.5X6-MM THK) | |
| 20. | 3B-6753 | [18] | BOLT (3/4-10X4.75-IN) | |
| 21. | 153-7383 B | [1] | SHIM (0.12-MM THK) | |
| B | USE AS REQUIRED | |||
#SEBP24910661
142-0742: ACCESSORY GP-CAB
142-0742 ACCESSORY GP-CAB -LOW
S/N 8MN1-UP
PART OF 145-1278 CONVERTER AR-ELECTRICAL
AN ATTACHMENT
S/N 8MN1-UP
PART OF 145-1278 CONVERTER AR-ELECTRICAL
AN ATTACHMENT
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS#SEBP24910662
142-0747: ACCESSORY GP-CAB
142-0747 ACCESSORY GP-CAB -HIGH
S/N 8MN1-UP
PART OF 145-1279 CONVERTER AR-ELECTRICAL
AN ATTACHMENT
S/N 8MN1-UP
PART OF 145-1279 CONVERTER AR-ELECTRICAL
AN ATTACHMENT
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS#SEBP24910663
116-2779: ADJUSTER GP-SEAT
116-2779 ADJUSTER GP-SEAT
S/N 8MN1-UP
PART OF 8Y-6851, 8Y-6852 SEAT GP-STATIC
ALSO AN ATTACHMENT
S/N 8MN1-UP
PART OF 8Y-6851, 8Y-6852 SEAT GP-STATIC
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9C-5347 | [4] | BOLT (1/2-13X0.75-IN) | |
| 2. | 9V-7943 | [2] | SPRING | |
| 3. | 116-2327 | [1] | SUPPORT AS | |
| 4. | 9C-2177 | [1] | CAP | |
| 5. | 6W-0590 | [1] | LEVER (SEAT ADJUST) | |
| 6. | 3J-5696 | [1] | PIPE | |
| 7. | 4V-7890 | [1] | SPRING | |
| 8. | 6W-0111 | [2] | LINK | |
| 9. | 2L-5893 | [1] | PIN-SPRING | |
| 10. | 4V-7891 | [1] | LATCH AS | |
| 11. | 5B-6172 | [8] | WASHER (9.7X19X0.8-MM THK) | |
| 12. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 13. | 9V-3043 | [1] | LINK AS | |
| 14. | 6W-0108 | [1] | LINK AS | |
| 15. | 116-2016 | [1] | ANGLE AS (LH) | |
| 16. | 116-2015 | [1] | ANGLE AS (RH) | |
| 17. | 6W-1885 | [1] | CHANNEL AS | |
| 9V-7440 | [4] | NUT-WELD | ||
| 18. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) |
#SEBP24910664
173-1028: ADJUSTER GP-SEAT
173-1028 ADJUSTER GP-SEAT
S/N 8MN1-UP
SLIDE
PART OF 301-4174, 302-8812 SEAT GP
Type 1
S/N 8MN1-UP
SLIDE
PART OF 301-4174, 302-8812 SEAT GP
Type 1
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4V-8256 | [4] | SPRING | |
| 2. | 117-4486 | [1] | ANCHOR | |
| 3. | 117-4492 | [1] | ROD | |
| 4. | 132-0338 | [2] | WASHER-PLASTIC (13X31.7X0.8-MM THK) | |
| 5. | 136-1544 | [1] | LATCH AS (LH) | |
| 6. | 143-1288 | [1] | LOCKNUT-FLANGE (3/8-16-THD) | |
| 7. | 156-5545 | [1] | LATCH AS (RH) | |
| 8. | 164-4531 | [1] | ROD | |
| 9. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 10. | 170-1114 | [1] | HANDLE (SLIDE ADJUSTMENT) | |
| 11. | 170-1115 | [1] | HANDLE (TILT ADJUSTMENT) | |
| 12. | 172-4001 | [1] | BRACKET | |
| 13. | 1D-4675 | [1] | BOLT-CARRIAGE (3/8-16X0.75-IN) | |
| 14. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 15. | 7L-8170 | [1] | NUT-FULL (5/16-18-THD) | |
| 16. | 7X-0608 | [2] | WASHER-HARD (10.2X16X2-MM THK) | |
| 17. | 170-1112 | [1] | PLATE AS |
#SEBP24910665
173-1028: ADJUSTER GP-SEAT
173-1028 ADJUSTER GP-SEAT
S/N 8MN1-UP
SLIDE
PART OF 301-4174, 302-8812 SEAT GP
Type 2
S/N 8MN1-UP
SLIDE
PART OF 301-4174, 302-8812 SEAT GP
Type 2
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4V-8256 | [4] | SPRING | |
| 2. | 117-4492 | [1] | ROD | |
| 3. | 136-1544 | [1] | LATCH AS (LH) | |
| 4. | 156-5545 | [1] | LATCH AS (RH) | |
| 5. | 164-4531 | [1] | ROD | |
| 6. | 170-1112 | [1] | PLATE AS | |
| 7. | 170-1114 | [1] | HANDLE (SLIDE ADJUSTMENT) | |
| 8. | 170-1115 | [1] | HANDLE (TILT ADJUSTMENT) | |
| 9. | 132-0338 | [2] | WASHER-PLASTIC (13X31.7X0.8-MM THK) | |
| 10. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 11. | 7X-0608 | [2] | WASHER-HARD (10.2X16X2-MM THK) |
#SEBP24910666
8W-7646: AIR CONDITIONER & MOUNTING GP
8W-7646 AIR CONDITIONER & MOUNTING GP
S/N 8MN1-UP
PART OF 8W-7645 AIR CONDITIONER AR
AN ATTACHMENT
S/N 8MN1-UP
PART OF 8W-7645 AIR CONDITIONER AR
AN ATTACHMENT
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS#SEBP24910667
8W-7645: AIR CONDITIONER AR
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7E-6461 Y | [1] | COMPRESSOR GP-REFRIGERANT | ||
| 7I-5015 Y | [1] | DUCT GP-CAB AIR | ||
| 8W-6333 Y | [1] | CONDENSER & MTG GP-REFRIGERANT | ||
| 8W-6899 Y | [1] | LINES GP-AIR CONDITIONER | ||
| 8W-7646 Y | [1] | AIR CONDITIONER & MOUNTING GP | ||
| 8W-7653 Y | [1] | DUCT & CONTROL GP | ||
| 8X-2925 Y | [1] | FILTER GP-CAB AIR | ||
| 8X-4558 Y | [1] | LINES GP-HEATER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24910668
8C-9788: AIR CONDITIONER GP
8C-9788 AIR CONDITIONER GP
S/N 8MN1-UP
PART OF 8W-7646 AIR CONDITIONER & MOUNTING GP
Type 1
AN ATTACHMENT
S/N 8MN1-UP
PART OF 8W-7646 AIR CONDITIONER & MOUNTING GP
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-9787 Y | [1] | HEATER GP-CAB | |
| 2. | 9X-9653 | [1] | COIL AS-EVAPORATOR | |
| 3. | 124-3138 | [1] | SEAL | |
| 4. | 9X-7381 | [1] | SEAL-O-RING | |
| 5. | 9X-7382 | [1] | SEAL-O-RING | |
| 6. | 9X-8117 | [2] | TUBE AS | |
| 7. | 3T-3198 | [1] | GROMMET | |
| 8. | 3T-3197 | [1] | GROMMET | |
| 9. | 8X-7152 I | [1] | HOSE AS | |
| 10. | 8X-7153 I | [1] | HOSE AS | |
| 11. | 7T-9793 | [2] | VALVE-CHECK | |
| 12. | 8T-6631 | [2] | SCREW-MACHINE (8-32X0.5-IN) | |
| 13. | 3B-4501 | [2] | LOCKWASHER | |
| 14. | 3E-5464 | [1] | SWITCH AS-THERMOSTAT (HVAC)(CAB AIR) | |
| 15. | 9X-2126 BE | SEAL | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24910669
8C-9788: AIR CONDITIONER GP
8C-9788 AIR CONDITIONER GP
S/N 8MN1-UP
PART OF 8W-7646 AIR CONDITIONER & MOUNTING GP
Type 2
AN ATTACHMENT
S/N 8MN1-UP
PART OF 8W-7646 AIR CONDITIONER & MOUNTING GP
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 12H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-3197 | [1] | GROMMET | |
| 2. | 9X-7382 | [1] | SEAL-O-RING | |
| 3. | 3T-3198 | [1] | GROMMET | |
| 4. | 9X-7381 | [1] | SEAL-O-RING | |
| 5. | 238-0417 | [1] | CORE AS-HEATER | |
| 6. | 125-0438 | [1] | GASKET | |
| 7. | 9X-2126 BE | SEAL | ||
| 8. | 9X-9653 | [1] | COIL AS-EVAPORATOR | |
| 9. | 124-3138 | [1] | SEAL | |
| 10. | 5P-5637 BD | SEAL | ||
| 11. | 8X-5540 | [1] | COVER | |
| 12. | 124-1432 | [1] | HOUSING AS | |
| 13. | 134-8273 M | [2] | SCREW-FLAT HEAD (M10X1.5X25-MM) | |
| 14. | 8P-5141 | [2] | PLATE-ORIFICE | |
| 15. | 123-4618 | [1] | COVER | |
| 16. | 113-4251 | [1] | PLATE | |
| 17. | 9X-2040 M | [2] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 18. | 5P-1075 | [13] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 19. | 5C-2890 M | [6] | NUT (M6X1-THD) | |
| 20. | 123-4701 | [1] | SEAL | |
| 21. | 106-5840 | [1] | COVER | |
| 22. | 6V-8801 | [13] | NUT (3/8-16-THD) | |
| 23. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 24. | 124-1429 | [1] | HARNESS AS-HEATER & AIR COND | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 25. | 9M-8406 | [1] | CLIP (LOOP) | |
| 26. | 8T-4205 | [16] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 27. | 9X-2041 M | [5] | SCREW-TRUSS HEAD (M10X1.5X20-MM) | |
| 28. | 3E-5464 | [1] | SWITCH AS-THERMOSTAT (HVAC)(AIR CONDITIONER) | |
| 29. | 8T-6631 | [2] | SCREW-MACHINE (8-32X0.5-IN) | |
| 30. | 3B-4501 | [2] | LOCKWASHER | |
| 31. | 8X-7153 I | [1] | HOSE AS | |
| 32. | 8X-7152 I | [1] | HOSE AS | |
| 33. | 6P-3236 | [1] | SWITCH AS-ROTARY (FAN SPEED) | |
| 6V-8362 | [5] | SCREW-MACHINE (8-32X0.31-IN) | ||
| 9B-7233 | [5] | LOCKWASHER | ||
| 34. | 2P-4339 | [1] | NUT-JAM (7/16-28-THD) | |
| 35. | 2V-0099 | [1] | KNOB-CONTROL (FAN SPEED) | |
| 35A. | 2V-0099 | [1] | KNOB-CONTROL (TEMPERATURE) | |
| 36. | 3E-3890 | [1] | FILM-IDENTIFICATION (FAN SPEED, TEMPERATURE)(FAN SPEED, TEMPERATURE) | |
| 37. | 8D-1429 | [1] | LAMP (24-VOLT)(FAN SPEED, TEMPERATURE) | |
| 38. | 124-9006 | [1] | SHAFT | |
| 39. | 6T-5345 | [1] | BUSHING-TERMINAL | |
| 40. | 124-9007 | [1] | SHAFT AS | |
| 4L-5966 | [2] | SETSCREW (10-32X0.25-IN) | ||
| 41. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 42. | 125-0440 | [1] | PLATE | |
| 43. | 5P-5672 BD | SEAL | ||
| 44. | 8X-5538 | [1] | COVER AS | |
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 45. | 8C-3756 | [1] | FILM-IDENTIFICATION (AIR CONDITIONER) | |
| 46. | 8E-7791 | [1] | STRAP | |
| 47. | 7G-4824 | [1] | STRAP | |
| 48. | 104-2091 | [8] | SCREW-FLAT HEAD (6-20X0.5-IN) | |
| 49. | 114-2702 | [1] | SUPPORT AS | |
| 3E-4304 M | [6] | INSERT-THREADED (M6X1-THD) | ||
| 5H-0255 | [1] | BOSS | ||
| 5P-1075 | [8] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 123-8408 | [2] | TUBE AS | ||
| 6V-9632 M | [8] | NUT-WELD (M6X1-THD) | ||
| 7T-1099 | [1] | LINK | ||
| 8T-3490 M | [13] | NUT-WELD (M10X1.5-THD) | ||
| 9G-9155 | [1] | CLIP | ||
| 50. | 110-6393 | [1] | PLATE-INSTRUCTION (AIR CONDITIONER) | |
| 52. | 8Y-6388 | [4] | LOUVER AS-VENT | |
| 53. | 3S-2093 | [3] | STRAP-CABLE | |
| 54. | 6V-7728 M | [1] | BOLT (M6X1X45-MM) | |
| 55. | 9G-1950 | [1] | RESISTOR | |
| 56. | 3E-0400 | [2] | WHEEL AS-BLOWER | |
| 57. | 6V-1668 | [2] | WASHER (6.5X29.1X3-MM THK) | |
| 58. | 141-9784 M | [1] | BOLT (M6X1X190-MM) | |
| 59. | 8C-4586 | [2] | CLAMP | |
| 60. | 316-1927 | [1] | MOTOR AS-BLOWER (24-VOLT, A/C, HEATER) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 61. | 130-5300 | [1] | CLIP | |
| 62. | 8T-4171 M | [2] | BOLT (M6X1X12-MM) | |
| 63. | 238-0415 | [1] | VALVE AS-WATER | |
| 64. | 124-1431 | [1] | BRACKET | |
| 65. | 9X-2185 | [4] | SCREW (8-15X0.44-IN) | |
| 66. | 129-4935 | [1] | SEAL | |
| 67. | 7X-0591 | [2] | WASHER-HARD (17X29X3-MM THK) | |
| 68. | 149-7798 | [1] | PLATE | |
| 69. | 5P-9135 | [1] | GROMMET | |
| 70. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 71. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 72. | 3H-2900 | [1] | GROMMET | |
| 73. | 8X-5536 | [1] | COVER | |
| 74. | 136-1953 BE | HOSE (34-CM) | ||
| 75. | 9X-2488 | [4] | CLAMP-HOSE | |
| 76. | 129-3178 M | [4] | LOCKNUT (M6X1-THD) | |
| 77. | 124-3137 | [1] | BRACKET | |
| 78. | 142-4940 | [1] | PLATE AS | |
| 79. | 5P-6129 BD | TUBE | ||
| 80. | 7T-9793 | [2] | VALVE-CHECK | |
| 81. | 5P-5908 BD | SEAL | ||
| 82. | 4M-6582 | [1] | SEAL-O-RING | |
| 83. | 248-6772 | [4] | SCREW-MACHINE (8-16X7.75-IN) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
