AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

421-5595 LINES GP-FUEL FILTER S/N 1AB1640-UP CANNOT BE USED WITH AFTER COOLER GROUP AN ATTACHMENT 631E


FUEL SYSTEM
LINES GP-FUEL
PUMP GP-UNIT INJECTOR HYD
LINES GP-FUEL
PUMP GP-UNIT INJECTOR HYD

WHEEL TRACTOR 631E WHEEL TRACTOR 1AB
 631E Series II Wheel Tractor 1AB01640-UP (MACHINE) POWERED BY 3408E Engine SEBP2495 631E 1AB   (1985)

FUEL SYSTEM

LINES GP-FUEL
LINES GP-FUEL FILTER
126-4037 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
126-4037 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
421-5595 LINES GP-FUEL FILTER
MANIFOLD GP-FUEL
197-9619 MANIFOLD GP-FUEL
 

#SEBP24950270
 

421-5595: LINES GP-FUEL FILTER

421-5595 LINES GP-FUEL FILTER
S/N 1AB1640-UP
CANNOT BE USED WITH AFTER COOLER GROUP
AN ATTACHMENT
i05173950 SEBP2495
4215595 LINES GP-FUEL FILTER Parts scheme 4215595 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 631E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6696 [1] TEE-O-RING  
2. 125-6796 I [1] HOSE AS  
3. 126-4035 [1] TUBE AS  
4. 125-6795 I [1] HOSE AS  
5. 126-4036 [1] TUBE AS  
6. 125-6797 I [1] HOSE AS  
7. 126-5481 [1] BRACKET AS  
8. 8P-5210 [1] BRACKET  
9. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
10. 6K-9194 [1] ELBOW  
11. 131-7875 I [1] HOSE AS  
12. 183-3399 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8636 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
  228-7089 [1] SEAL-O-RING  
13. 244-3712 [1] PLUG AS  
  9S-4191 [1] PLUG (9/16-18-THD)  
  214-7568 [1] SEAL-O-RING  
14. 319-6213 [1] CONNECTOR AS  
  6V-8634 [1] CONNECTOR  
  228-7089 [1] SEAL-O-RING  
  238-5080 [1] SEAL-O-RING  
15. 228-7089 [1] SEAL-O-RING  
16. 327-4448 Y [1] VALVE GP-CHECK (FUEL)  
17. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
18. 396-0425 [1] CONNECTOR AS  
  8T-1779 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
  228-7089 [1] SEAL-O-RING  
19. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
20. 102-2240 Y [1] SENSOR GP-TEMPERATURE (3-PIN)(FUEL)  
21. 238-5080 [2] SEAL-O-RING  
22. 183-3407 [4] PLUG AS  
    (EACH INCLUDES)
  9S-8004 [1] PLUG (9/16-18-THD)  
  214-7568 [1] SEAL-O-RING  
23. 8M-2773 [1] CLIP (LOOP)  
24. 5P-7854 [1] CLIP (LOOP)  
25. 0S-1594 [1] BOLT (3/8-16X1-IN)  
26. 9X-6458 [5] WASHER-HARD (10.2X22.5X3-MM THK)  
27. 319-6226 [2] ELBOW AS  
    (EACH INCLUDES)
  8T-6876 [1] ELBOW  
  214-7568 [1] SEAL-O-RING  
  228-7090 [1] SEAL-O-RING  
28. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
29. 319-6240 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-9873 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
  228-7090 [1] SEAL-O-RING  
30. 1B-9575 [2] BOLT (5/16-18X1.56-IN)  
31. 4B-0418 [1] CLIP  
32. 123-0555 [1] MANIFOLD  
33. 228-7090 [1] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP24950271
 

121-4034: LINES GP-INJECTOR HYD PUMP

121-4034 LINES GP-INJECTOR HYD PUMP
S/N 99C1-UP
PART OF 123-0207, 225-0397 ENGINE AR
ALSO AN ATTACHMENT
i00089906 SEBP2495
1214034 LINES GP-INJECTOR HYD PUMP Parts scheme
  For full view, you need register

Parts for your 631E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-3202 [1] TUBE AS  
2. 280-7460 [1] TUBE AS  
3. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
4. 0L-1143 [2] BOLT (3/8-16X2.5-IN)  
5. 9L-9132 [1] WASHER (10.2X25.5X2.5-MM THK)  
6. 234-8937 [1] SEAL-INTEGRAL  
7. 6V-9009 [1] ELBOW  
8. 5P-7815 [1] SEAL-O-RING  
9. 9X-7734 [1] SEAL-O-RING  
10. 6V-8626 [1] ELBOW  
11. 152-2939 [2] SEAL-O-RING  
12. 152-2938 [4] SEAL-O-RING  
13. 6V-5134 [1] SEAL-O-RING  
14. 162-2501 I [1] HOSE AS  
15. 6V-9003 [1] ELBOW  
16. 113-1921 [1] ELBOW  
17. 8S-0023 [1] CLIP (SLOT)  
18. 8S-0024 [1] CLIP (TAB)  
19. 3K-1470 B [1] SPACER (0.4X1X0.38-IN THK)  
20. 258-8917 [1] SLEEVE-PROTECTION  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP24950272
 

197-9619: MANIFOLD GP-FUEL

197-9619 MANIFOLD GP-FUEL
S/N TXH1564-UP
PART OF 356-1887 LINES GP-FUEL
i04025352 SEBP2495
1979619 MANIFOLD GP-FUEL Parts scheme
  For full view, you need register

Parts for your 631E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 168-0300 [1] MANIFOLD  
2. 353-5130 [1] ADAPTER AS (COOLANT)  
  6V-6609 [1] SEAL-O-RING  
  8M-0505 [1] ADAPTER  
3. 313-9614 [2] ADAPTER AS (FUEL)  
  2R-6806 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
 

#SEBP24950273
 

126-7292: PUMP & MTG GP-UNIT INJ HYD

126-7292 PUMP & MTG GP-UNIT INJ HYD
S/N 99C1-168
PART OF 123-0207 ENGINE AR
i00089943 SEBP2495
1267292 PUMP & MTG GP-UNIT INJ HYD Parts scheme
  For full view, you need register

Parts for your 631E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5855 [3] BOLT-12 POINT HEAD (1/2-13X1.75-IN)  
2. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 125-3225 Y [1] PUMP GP-UNIT INJECTOR HYD  
4. 0S-1617 [4] BOLT (5/16-18X0.75-IN)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 118-8157 [1] SUPPORT-PUMP  
7. 6V-1197 [1] SEAL-O-RING  
8. 103-6092 Y [1] SENSOR GP-PRESSURE (ENGINE OIL)  
9. 9X-0262 [1] ADAPTER  
10. 6V-5048 [2] SEAL-O-RING  
11. 106-0735 Y [1] SENSOR GP-TEMPERATURE (ENGINE OIL)  
12. 8L-2786 [2] SEAL-O-RING  
13. 4P-0707 [2] CLAMP AS  
    (EACH INCLUDES)
  7C-2199 [1] CLAMP  
  307-8373 [1] GROMMET  
14. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
15. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8T-1686 [1] ADAPTER-ELBOW  
17. 033-6033 [1] SEAL-O-RING  
18. 127-1969 [1] TUBE AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24950274
 

126-7292: PUMP & MTG GP-UNIT INJ HYD

126-7292 PUMP & MTG GP-UNIT INJ HYD
S/N 99C169-332
PART OF 123-0207 ENGINE AR
i00089944 SEBP2495
1267292 PUMP & MTG GP-UNIT INJ HYD Parts scheme
  For full view, you need register

Parts for your 631E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5855 [3] BOLT-12 POINT HEAD (1/2-13X1.75-IN)  
2. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 133-1708 YC [1] PUMP GP-UNIT INJECTOR HYD  
4. 0S-1617 [4] BOLT (5/16-18X0.75-IN)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 118-8157 [1] SUPPORT-PUMP  
7. 6V-1197 [1] SEAL-O-RING  
8. 103-6092 Y [1] SENSOR GP-PRESSURE (ENGINE OIL)  
9. 9X-0262 [1] ADAPTER  
10. 6V-5048 [2] SEAL-O-RING  
11. 106-0735 Y [1] SENSOR GP-TEMPERATURE (ENGINE OIL)  
12. 8L-2786 [2] SEAL-O-RING  
13. 4P-0707 [2] CLAMP AS  
    (EACH INCLUDES)
  7C-2199 [1] CLAMP  
  307-8373 [1] GROMMET  
14. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
15. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8T-1686 [1] ADAPTER-ELBOW  
17. 033-6033 [1] SEAL-O-RING  
18. 127-1969 [1] TUBE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24950275
 

126-7292: PUMP & MTG GP-UNIT INJ HYD

126-7292 PUMP & MTG GP-UNIT INJ HYD
S/N 99C333-1100
PART OF 123-0207 ENGINE AR
i00089945 SEBP2495
1267292 PUMP & MTG GP-UNIT INJ HYD Parts scheme
  For full view, you need register

Parts for your 631E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5855 [3] BOLT-12 POINT HEAD (1/2-13X1.75-IN)  
2. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 134-1598 CY [1] PUMP GP-UNIT INJECTOR HYD  
4. 0S-1617 [4] BOLT (5/16-18X0.75-IN)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 118-8157 [1] SUPPORT-PUMP  
7. 6V-1197 [1] SEAL-O-RING  
8. 103-6092 Y [1] SENSOR GP-PRESSURE (ENGINE OIL)  
9. 9X-0262 [1] ADAPTER  
10. 6V-5048 [2] SEAL-O-RING  
11. 106-0735 Y [1] SENSOR GP-TEMPERATURE (ENGINE OIL)  
12. 8L-2786 [2] SEAL-O-RING  
13. 4P-0707 [2] CLAMP AS  
    (EACH INCLUDES)
  7C-2199 [1] CLAMP  
  307-8373 [1] GROMMET  
14. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
15. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8T-1686 [1] ADAPTER-ELBOW  
17. 033-6033 [1] SEAL-O-RING  
18. 127-1969 [1] TUBE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24950276
 

126-7292: PUMP & MTG GP-UNIT INJ HYD

126-7292 PUMP & MTG GP-UNIT INJ HYD
S/N 99C1101-1828
PART OF 123-0207 ENGINE AR
i00089946 SEBP2495
1267292 PUMP & MTG GP-UNIT INJ HYD Parts scheme
  For full view, you need register

Parts for your 631E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5855 [3] BOLT-12 POINT HEAD (1/2-13X1.75-IN)  
2. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 134-9405 CY [1] PUMP GP-UNIT INJECTOR HYD  
4. 0S-1617 [4] BOLT (5/16-18X0.75-IN)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 118-8157 [1] SUPPORT-PUMP  
7. 6V-1197 [1] SEAL-O-RING  
8. 103-6092 Y [1] SENSOR GP-PRESSURE (ENGINE OIL)  
9. 9X-0262 [1] ADAPTER  
10. 6V-5048 [2] SEAL-O-RING  
11. 106-0735 Y [1] SENSOR GP-TEMPERATURE (ENGINE OIL)  
12. 8L-2786 [2] SEAL-O-RING  
13. 4P-0707 [2] CLAMP AS  
    (EACH INCLUDES)
  7C-2199 [1] CLAMP  
  307-8373 GROMMET  
14. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
15. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8T-1686 [1] ADAPTER-ELBOW  
17. 033-6033 [1] SEAL-O-RING  
18. 127-1969 [1] TUBE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24950277
 

126-7292: PUMP & MTG GP-UNIT INJ HYD

126-7292 PUMP & MTG GP-UNIT INJ HYD
S/N 99C1829-4662
PART OF 123-0207 ENGINE AR
i00515008 SEBP2495
1267292 PUMP & MTG GP-UNIT INJ HYD Parts scheme
  For full view, you need register

Parts for your 631E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5855 [3] BOLT-12 POINT HEAD (1/2-13X1.75-IN)  
2. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 144-0835 CY [1] PUMP GP-UNIT INJECTOR HYD  
4. 0S-1617 [4] BOLT (5/16-18X0.75-IN)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 118-8157 [1] SUPPORT-PUMP  
7. 6V-1197 [1] SEAL-O-RING  
8. 103-6092 Y [1] SENSOR GP-PRESSURE (ENGINE OIL)  
9. 9X-0262 [1] ADAPTER  
10. 6V-5048 [2] SEAL-O-RING  
11. 106-0735 Y [1] SENSOR GP-TEMPERATURE (ENGINE OIL)  
12. 8L-2786 [2] SEAL-O-RING  
13. 4P-0707 [2] CLAMP AS  
    (EACH INCLUDES)
  7C-2199 [1] CLAMP  
  307-8373 [1] GROMMET  
14. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
15. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8T-1686 [1] ADAPTER-ELBOW  
17. 033-6033 [1] SEAL-O-RING  
18. 127-1969 [1] TUBE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24950278
 

126-7292: PUMP & MTG GP-UNIT INJ HYD

126-7292 PUMP & MTG GP-UNIT INJ HYD
S/N 99C4663-4816
PART OF 123-0207 ENGINE AR
i01055140 SEBP2495
1267292 PUMP & MTG GP-UNIT INJ HYD Parts scheme
  For full view, you need register

Parts for your 631E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5855 [3] BOLT-12 POINT HEAD (1/2-13X1.75-IN)  
2. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 169-1034 CY [1] PUMP GP-UNIT INJECTOR HYD  
4. 0S-1617 [4] BOLT (5/16-18X0.75-IN)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 118-8157 [1] SUPPORT-PUMP  
7. 6V-1197 [1] SEAL-O-RING  
8. 103-6092 Y [1] SENSOR GP-PRESSURE (ENGINE OIL)  
9. 9X-0262 [1] ADAPTER  
10. 6V-5048 [2] SEAL-O-RING  
11. 106-0735 Y [1] SENSOR GP-TEMPERATURE (ENGINE OIL)  
12. 8L-2786 [2] SEAL-O-RING  
13. 4P-0707 [2] CLAMP AS  
    (EACH INCLUDES)
  7C-2199 [1] CLAMP  
  307-8373 [1] GROMMET  
14. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
15. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8T-1686 [1] ADAPTER-ELBOW  
17. 033-6033 [1] SEAL-O-RING  
18. 127-1969 [1] TUBE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24950279
 

126-7292: PUMP & MTG GP-UNIT INJ HYD

126-7292 PUMP & MTG GP-UNIT INJ HYD
S/N 99C4817-7189
PART OF 123-0207 ENGINE AR
i01094111 SEBP2495
1267292 PUMP & MTG GP-UNIT INJ HYD Parts scheme
  For full view, you need register

Parts for your 631E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-5855 [3] BOLT-12 POINT HEAD (1/2-13X1.75-IN)  
2. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 144-0835 CY [1] PUMP GP-UNIT INJECTOR HYD  
4. 0S-1617 [4] BOLT (5/16-18X0.75-IN)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 118-8157 [1] SUPPORT-PUMP  
7. 6V-1197 [1] SEAL-O-RING  
8. 161-9931 CY [1] SENSOR GP-PRESSURE (ENGINE OIL)  
9. 9X-0262 [1] ADAPTER  
10. 6V-5048 [2] SEAL-O-RING  
11. 106-0735 Y [1] SENSOR GP-TEMPERATURE (ENGINE OIL)  
12. 8L-2786 [2] SEAL-O-RING  
13. 4P-0707 [2] CLAMP AS  
    (EACH INCLUDES)
  7C-2199 [1] CLAMP  
  307-8373 [1] GROMMET  
14. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
15. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 8T-1686 [1] ADAPTER-ELBOW  
17. 033-6033 [1] SEAL-O-RING  
18. 127-1969 [1] TUBE AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714}
Installation of New Hose Assembly for Unit Injector Hydraulic Pump{1274, 1307, 1714}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Air Fuel Ratio Control (AFRC) Adjustment To Help Reduce Excessive Black Smoke During Acceleration
Air Fuel Ratio Control (AFRC) Adjustment To Help Reduce Excessive Black Smoke During Acceleration
Excessive Oil Leakage From Hydraulically Actuated Electronic Unit Injectors (Heui)
Excessive Oil Leakage From Hydraulically Actuated Electronic Unit Injectors (Heui)
Hydraulic Actuated Electronically Controlled Unit Injector (HEUI) Manifold In Engine Cylinder Head Group May Leak
Hydraulic Actuated Electronically Controlled Unit Injector (HEUI) Manifold In Engine Cylinder Head Group May Leak
Specifications
Primary Fuel Filter And Fuel Filter Base
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Disassembly and Assembly
Water Separator & Fuel Filter Base
SUPPLEMENT FOR 631E SERIES II & 633E SERIES II & 637E SERIES
Service Magazine
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Bracket For Fuel Lines Now Bolted To Frame Bracket; Makes Air Compressor More Accessible{1274,1250}
1987/04/06
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
5P7437 Adapter (Part Of 8T5301 Diesel Timing Adapter Group) Must Be Modified To Work On Current Fuel Lines.{0782}
1992/02/03
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/05/17
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/11/15
Improved 1R-0712 Fuel Filter Provides Improved Sealing{1261}
1994/03/28
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
129-0372 Primary Fuel Filter/Water Separator Assembly Used On 3408E And 3412E Machine Engines With Hydraulic Electronic Unit Injection (HEUI) {1260,1263}
1996/04/01
Correct Procedure For Installing Hydraulically Actuated Electronic Unit Injectors (HEUI){1290}
1997/08/25
The 154-6732 Pump Kit Is Available To Help Service The Unit Injector Hydraulic Pump Group On 3408E (99C) And 3412E (80M) Machine Engines {1714}
1998/01/26
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Load Piston Body Changes In ICM Pressure Control Valve Group{3073,3030}
1998/05/04
Priming The 144-0835 Unit Injector Hydraulic Pump{1714}
1998/07/20
New Injector Sleeve Bore Gauge And Tube Brush Available For Injector Sleeve Bore; New Grommet Available For Unit Injector Electrical Connection {1713,1290}
1998/10/19
Bearing Specifications For 3408E And 3412E Hydraulically Actuated Electronically Controlled Unit Injector (HEUI) Hydraulic Drive Group{1714}
1999/02/01
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Revised CD-ROM For Hydraulic Electronic Unit Injector (HEUI) Fuel System Available {0350}
1999/06/28
Installation of a Protective Sleeve for the Hose on the Pump of the Hydraulic Electronic Unit Injector (HEUI) Fuel System is Now Used {1307, 1714}
2005/02/07

Caterpillar Parts SIS Catalog 631E :

LINES GP-FUEL FILTER
126-4037 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
126-4037 LINES GP-FUEL FILTER
LINES GP-FUEL
356-1887 LINES GP-FUEL
LINES GP-FUEL
356-1887 LINES GP-FUEL
LINES GP-FUEL
243-3368 LINES GP-FUEL
LINES GP-FUEL
222-8142 LINES GP-FUEL
LINES GP-FUEL
222-8142 LINES GP-FUEL
LINES GP-FUEL
222-8142 LINES GP-FUEL
LINES GP-INJECTOR HYD PUMP
121-4034 LINES GP-INJECTOR HYD PUMP
MANIFOLD GP-FUEL
197-9619 MANIFOLD GP-FUEL
PUMP & MTG GP-UNIT INJ HYD
126-7292 PUMP & MTG GP-UNIT INJ HYD
PUMP & MTG GP-UNIT INJ HYD
126-7292 PUMP & MTG GP-UNIT INJ HYD
PUMP & MTG GP-UNIT INJ HYD
126-7292 PUMP & MTG GP-UNIT INJ HYD
PUMP & MTG GP-UNIT INJ HYD
126-7292 PUMP & MTG GP-UNIT INJ HYD
PUMP & MTG GP-UNIT INJ HYD
126-7292 PUMP & MTG GP-UNIT INJ HYD
PUMP & MTG GP-UNIT INJ HYD
126-7292 PUMP & MTG GP-UNIT INJ HYD

Truck sale:

Caterpillar 631E
 
Caterpillar 631E
- Scrapers
TRACTOR & EQUIPMENT CO.
Caterpillar 631E, Schaber, Bau-Und Bergbauausrüstung
65.000 
Caterpillar 631E, Schaber, Bau-Und Bergbauausrüstung
- Scrapers
CASHMAN EQUIPMENT CO.
Caterpillar 631E, Schaber, Bau-Und Bergbauausrüstung
65.000 
Caterpillar 631E, Schaber, Bau-Und Bergbauausrüstung
- Scrapers
CASHMAN EQUIPMENT CO.
Caterpillar 631E, Schaber, Bau-Und Bergbauausrüstung
65.000 
Caterpillar 631E, Schaber, Bau-Und Bergbauausrüstung
- Scrapers
CASHMAN EQUIPMENT CO.
Caterpillar 631E, Schaber, Bau-Und Bergbauausrüstung
65.000 
Caterpillar 631E, Schaber, Bau-Und Bergbauausrüstung
- Scrapers
CASHMAN EQUIPMENT CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.