AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-1495 TURBOCHARGER GP S/N 99C1-UP PART OF 123-0207, 225-0397 ENGINE AR ALSO AN ATTACHMENT 637E WHEEL TRACTOR


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
CONTROL GP-GOVERNOR
FILTER GP-FUEL
PUMP GP-UNIT INJECTOR HYD

WHEEL TRACTOR 637E WHEEL TRACTOR 1FB
 637E Series II Wheel Tractor 1FB00660-UP (MACHINE) POWERED BY 3408E Engine SEBP2496 637E 1FB   (1985)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
362-0839 TURBOCHARGER GP
TURBOCHARGER GP
4W-1434 TURBOCHARGER GP
TURBOCHARGER GP
4W-1495 TURBOCHARGER GP
 

#SEBP24960230
 

4W-1495: TURBOCHARGER GP

4W-1495 TURBOCHARGER GP
S/N 99C1-UP
PART OF 123-0207, 225-0397 ENGINE AR
ALSO AN ATTACHMENT
i00147635 SEBP2496
4W1495 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 637E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-2765 [4] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
  2N-2766 [4] LOCKNUT (3/8-16-THD)  
2. 4W-1434 Y [1] TURBOCHARGER GP  
3. 1S-4295 C [1] GASKET (TURBOCHARGER)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24960231
 

123-5064: CONTROL GP-GOVERNOR

123-5064 CONTROL GP-GOVERNOR
S/N 1FB660-UP
PART OF 123-5058, 178-9290 CHASSIS AR
i00157062 SEBP2496
1235064 CONTROL GP-GOVERNOR Parts scheme 1235064 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 637E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6B-5072 [1] ADAPTER  
2. 9X-0435 [1] ADAPTER  
3. 194-6725 Y [1] SENSOR GP-PRESSURE (SERVICE BRAKE)  
4. 6V-5048 [1] SEAL-O-RING  
5. 5T-1576 [1] TUBE AS  
6. 124-9612 [1] PLATE AS  
  1F-0750 [3] NUT-WELD (3/8-16-THD)  
8. 8T-4896 [15] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 9S-8006 [2] PLUG (7/8-14-THD)  
10. 5K-9248 [1] CONNECTOR  
11. 2M-1908 [1] FITTING-BULKHEAD  
12. 9S-7722 [1] ELBOW-FLARED  
13. 5K-9246 [4] CONNECTOR  
14. 5T-1577 [1] TUBE AS  
15. 8T-8908 [3] BOLT (1/4-20X1-IN)  
16. 8T-4205 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
17. 6G-4700 Y [1] VALVE GP-AIR CONTROL (SCRAPER ACCELERATOR)  
18. 124-9333 [1] PEDAL  
19. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
20. 2N-7456 [2] SCREW-MACHINE (10-24X1.5-IN)  
21. 3E-7700 Y [1] SENSOR GP-POSITION (TRACTOR ACCELERATOR)  
22. 8T-7566 [1] PIN-SPRING  
23. 5H-4871 [1] PLUG  
24. 124-9334 [1] PLATE AS  
25. 8D-7052 [1] SPRING  
26. 124-9614 [1] PIN  
27. 8T-0277 [1] PIN-SPRING  
28. 5M-3062 [11] BOLT (3/8-16X0.75-IN)  
29. 2K-8467 [1] PIN-SPRING  
30. 1M-0437 [1] SPRING  
31. 6H-4005 [1] GROMMET  
32. 8M-2770 [1] CLIP (LOOP)  
33. 4S-7560 I [1] HOSE AS  
34. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
35. 1B-8706 [2] KEY-WOODRUFF  
36. 6G-4438 [1] PEDAL  
37. 5S-7382 [1] BOLT (3/8-16X1.375-IN)  
38. 6G-8909 [1] SHAFT  
39. 7S-9203 [1] WASHER  
40. 3K-9042 [1] RING-RETAINING  
41. 7X-0860 [1] BOLT (3/8-16X1.5-IN)  
42. 6V-8801 [1] NUT (3/8-16-THD)  
43. 6G-4661 [1] HOUSING AS  
  5P-7661 [1] BEARING AS-NEEDLE  
  6D-3787 [1] BEARING-ROLLER  
44. 6G-4448 [1] LEVER  
45. 6V-5782 [1] BOLT (5/16-18X1.125-IN)  
46. 1B-0676 [2] PIN  
47. 7V-0446 [2] CLIP  
48. 5D-1185 [1] ROD-CONTROL  
49. 1A-9252 [2] END-ADJUSTMENT ROD  
50. 5B-9079 [2] NUT-JAM (3/8-24-THD)  
51. 5K-9235 [1] ELBOW-FLARED  
52. 7K-1181 [4] STRAP-CABLE  
53. 4J-6311 [8] TAG-IDENTIFICATION (NUMBER ELEVEN)  
54. 4D-7969 I [1] HOSE AS  
55. 7N-3718 [1] CLIP  
56. 6K-8076 [1] CONNECTOR  
57. 4H-6147 [2] CONNECTOR  
58. 4K-8302 [1] CLIP (LOOP)  
59. 9M-8662 [2] COUPLING  
60. 3D-7587 [1] ELBOW (EXTERNAL PIPE)  
61. 5T-4909 [1] TUBE AS  
62. 125-5102 [1] TUBE AS  
63. 7J-8581 [1] CLIP  
64. 5T-5302 [2] GROMMET  
65. 3B-7722 [1] BUSHING-PIPE  
66. 142-8546 [1] SETSCREW-SOCKET  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP24960232
 

4N-7935: COVER GP-FUEL FILTER BASE

4N-7935 COVER GP-FUEL FILTER BASE
S/N 1FB660-UP
PART OF 123-5189 INSTALLATION AR-ENGINE
i00147621 SEBP2496
4N7935 COVER GP-FUEL FILTER BASE Parts scheme
  For full view, you need register

Parts for your 637E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-3121 [1] BOLT (5/16-18X1.5-IN)  
2. 6N-4414 C [1] COVER-FILTER BASE  
3. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
4. 8C-0617 C [1] BOLT (1/4-20X1.375-IN)  
5. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
6. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP24960233
 

125-3427: DRIVE GP-UNIT INJ HYD PUMP

125-3427 DRIVE GP-UNIT INJ HYD PUMP
S/N 99C1-4507
PART OF 125-3428 DRIVE GP-UNIT INJ HYD PUMP
i00093590 SEBP2496
1253427 DRIVE GP-UNIT INJ HYD PUMP Parts scheme
  For full view, you need register

Parts for your 637E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-3688 [1] SHAFT AS  
  3S-6605 [1] PLUG-CUP  
2. 150-2392 [1] PLATE-THRUST  
3. 106-3027 [1] GASKET  
4. 125-2730 [1] HOUSING AS  
  2H-1190 [2] DOWEL  
4A. 124-9336 [1] BUSHING  
4B. 124-9337 [1] BUSHING  
5. 125-3426 [1] HOUSING AS  
  2A-3746 [1] PLUG-CUP  
5A. 9M-7129 [1] BUSHING  
5B. 124-9337 [1] BUSHING  
6. 0S-1617 [2] BOLT (5/16-18X0.75-IN)  
7. 125-5835 [1] PLUG-FELT (UNIT INJ HYD PUMP)  
8. 1B-9575 [4] BOLT (5/16-18X1.56-IN)  
9. 0S-1618 [2] BOLT (5/16-18X1-IN)  
10. 9N-0869 [2] WASHER-HARD (8.8X25.5X2-MM THK)  
11. 9S-8004 [1] PLUG (9/16-18-THD)  
12. 6V-5049 [1] SEAL-O-RING  
13. 1D-4541 [2] BOLT (5/16-18X3-IN)  
14. 8M-6802 [3] SCREW-HEX SOCKET (1/4-20X1-IN)  
15. 124-6641 [1] GEAR (18-TEETH)  
16. 124-6640 [1] PLATE  
 

#SEBP24960234
 

125-3428: DRIVE GP-UNIT INJ HYD PUMP

125-3428 DRIVE GP-UNIT INJ HYD PUMP
S/N 99C1-4507
PART OF 123-0207 ENGINE AR
i00093591 SEBP2496
1253428 DRIVE GP-UNIT INJ HYD PUMP Parts scheme
  For full view, you need register

Parts for your 637E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-3427 Y [1] DRIVE GP-UNIT INJ HYD PUMP  
2. 6V-3549 [1] SEAL-O-RING  
3. 5P-0076 [4] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
4. 103-6093 Y [1] SENSOR GP-PRESSURE (ATMOSPHERIC)  
5. 9X-0261 [1] ADAPTER  
6. 6V-5048 [1] SEAL-O-RING  
7. 6V-5049 [1] SEAL-O-RING  
8. 118-6335 [1] PIN  
9. 6V-4589 [1] SEAL-O-RING  
10. 5P-9890 [2] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24960235
 

125-3428: DRIVE GP-UNIT INJ HYD PUMP

125-3428 DRIVE GP-UNIT INJ HYD PUMP
S/N 99C4508-4700
PART OF 123-0207 ENGINE AR
i01044170 SEBP2496
1253428 DRIVE GP-UNIT INJ HYD PUMP Parts scheme
  For full view, you need register

Parts for your 637E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-0148 CY [1] DRIVE GP-UNIT INJ HYD PUMP  
2. 6V-3549 [1] SEAL-O-RING  
3. 5P-0076 [4] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
4. 103-6093 Y [1] SENSOR GP-PRESSURE (ATMOSPHERIC)  
5. 9X-0261 [1] ADAPTER  
6. 6V-5048 [1] SEAL-O-RING  
7. 6V-5049 [1] SEAL-O-RING  
8. 118-6335 [1] PIN  
9. 6V-4589 [1] SEAL-O-RING  
10. 5P-9890 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24960236
 

125-3428: DRIVE GP-UNIT INJ HYD PUMP

125-3428 DRIVE GP-UNIT INJ HYD PUMP
S/N 99C4701-5427
PART OF 123-0207 ENGINE AR
i01057650 SEBP2496
1253428 DRIVE GP-UNIT INJ HYD PUMP Parts scheme
  For full view, you need register

Parts for your 637E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-0148 Y [1] DRIVE GP-UNIT INJ HYD PUMP  
2. 6V-3549 [1] SEAL-O-RING  
3. 5P-0076 [4] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
4. 161-9926 CY [1] SENSOR GP-PRESSURE (ATMOSPHERIC)  
5. 5M-2894 C [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 6V-5049 [1] SEAL-O-RING  
8. 118-6335 [1] PIN  
9. 6V-4589 [1] SEAL-O-RING  
10. 5P-9890 [2] SEAL-O-RING  
11. 9X-0261 [1] ADAPTER  
12. 6V-5048 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24960237
 

125-3428: DRIVE GP-UNIT INJ HYD PUMP

125-3428 DRIVE GP-UNIT INJ HYD PUMP
S/N 99C5428-6345
PART OF 123-0207 ENGINE AR
i01227304 SEBP2496
1253428 DRIVE GP-UNIT INJ HYD PUMP Parts scheme
  For full view, you need register

Parts for your 637E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-0148 Y [1] DRIVE GP-UNIT INJ HYD PUMP  
2. 6V-3549 [1] SEAL-O-RING  
3. 5P-0076 [4] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
4. 161-9925 CY [1] SENSOR GP-PRESSURE (ATMOSPHERIC)  
5. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 6V-5049 [1] SEAL-O-RING  
8. 118-6335 [1] PIN  
9. 6V-4589 [1] SEAL-O-RING  
10. 5P-9890 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24960238
 

125-3428: DRIVE GP-UNIT INJ HYD PUMP

125-3428 DRIVE GP-UNIT INJ HYD PUMP
S/N 99C6346-UP
PART OF 123-0207, 225-0397 ENGINE AR
ALSO AN ATTACHMENT
i01324350 SEBP2496
1253428 DRIVE GP-UNIT INJ HYD PUMP Parts scheme
  For full view, you need register

Parts for your 637E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 180-6649 CY [1] DRIVE GP-UNIT INJ HYD PUMP  
2. 6V-3549 [1] SEAL-O-RING  
3. 5P-0076 [4] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
4. 194-6722 CY [1] SENSOR GP-PRESSURE (ATMOSPHERIC)  
5. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 6V-5049 [1] SEAL-O-RING  
8. 118-6335 [1] PIN  
9. 6V-4589 [1] SEAL-O-RING  
10. 5P-9890 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24960239
 

162-0148: DRIVE GP-UNIT INJ HYD PUMP

162-0148 DRIVE GP-UNIT INJ HYD PUMP
S/N 99C4508-6345
PART OF 125-3428 DRIVE GP-UNIT INJ HYD PUMP
i01044183 SEBP2496
1620148 DRIVE GP-UNIT INJ HYD PUMP Parts scheme
  For full view, you need register

Parts for your 637E WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-0153 [1] SHAFT AS  
  3S-6605 [1] PLUG-CUP  
2. 150-2392 [1] PLATE-THRUST  
3. 106-3027 [1] GASKET  
4. 162-0158 [1] HOUSING AS  
  2H-1190 [2] DOWEL  
4A. 162-0151 [1] BUSHING  
4B. 162-0152 [1] BUSHING  
5. 162-0161 [1] HOUSING AS  
5A. 2A-3746 [1] PLUG-CUP  
5B. 162-0150 [1] BUSHING  
5C. 162-0151 [1] BUSHING  
6. 0S-1617 [2] BOLT (5/16-18X0.75-IN)  
7. 125-5835 [1] PLUG-FELT (UNIT INJ HYD PUMP)  
8. 1B-9575 [4] BOLT (5/16-18X1.56-IN)  
9. 0S-1618 [2] BOLT (5/16-18X1-IN)  
10. 9N-0869 [2] WASHER-HARD (8.8X25.5X2-MM THK)  
11. 9S-8004 [1] PLUG (9/16-18-THD)  
12. 6V-5049 [1] SEAL-O-RING  
13. 1D-4541 [2] BOLT (5/16-18X3-IN)  
14. 8M-6802 [3] SCREW-HEX SOCKET (1/4-20X1-IN)  
15. 162-0155 [1] GEAR-PUMP DRIVE (18-TEETH)  
16. 124-6640 [1] PLATE  
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Service Letter-NACD
Product Support Program For ReplacingThe Turbocharger Coolant Hose Assembly On Certain 631E, 633E, 637E, And 657E Wheel-Tractor Scrapers, And D9R Track-Type Tractors
Product Support Program For ReplacingThe Turbocharger Coolant Hose Assembly On Certain 631E, 633E, 637E, And 657E Wheel-Tractor Scrapers, And D9R Track-Type Tractors
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Inlet Air And Exhaust Lines
3408 VEHICULAR ENGINE
Turbocharger<BR> (AiResearch TL81)
3408 VEHICULAR ENGINE
Inlet Air And Exhaust Lines
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Turbocharger
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Turbocharger
3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger
3408E and 3412E Engines for Caterpillar Built Machines
Service Letter-China
Product Support Program For ReplacingThe Turbocharger Coolant Hose Assembly On Certain 631E, 633E, 637E, And 657E Wheel-Tractor Scrapers, And D9R Track-Type Tractors
Product Support Program For ReplacingThe Turbocharger Coolant Hose Assembly On Certain 631E, 633E, 637E, And 657E Wheel-Tractor Scrapers, And D9R Track-Type Tractors
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Service Letter-APD
Product Support Program For ReplacingThe Turbocharger Coolant Hose Assembly On Certain 631E, 633E, 637E, And 657E Wheel-Tractor Scrapers, And D9R Track-Type Tractors
Product Support Program For ReplacingThe Turbocharger Coolant Hose Assembly On Certain 631E, 633E, 637E, And 657E Wheel-Tractor Scrapers, And D9R Track-Type Tractors
Testing and Adjusting
Turbocharger - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Turbocharger
3408 VEHICULAR ENGINE FOR 631E & 637E TRACTORS
Turbocharger
3306 VEHICULAR ENGINE FOR 637E SCRAPER
Turbocharger
3306 VEHICULAR ENGINE FOR 637E SCRAPER
Turbocharger
SUPPLEMENT FOR 637E SCRAPER - 3306 ENGINE
Turbocharger
SUPPLEMENT FOR 631E SERIES II & 633E SERIES II & 637E SERIES
Turbocharger - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Assemble
3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Install
3408E and 3412E Engines for Caterpillar Built Machines
Turbocharger - Remove
C15 and C18 Engines for Caterpillar Built Machines
Turbocharger - Install
C15 and C18 Engines for Caterpillar Built Machines
Turbocharger - Disassemble
C15 and C18 Engines for Caterpillar Built Machines
Turbocharger - Assemble
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Adapter For Disassembly And Assembly Of Turbocharger Cartridge{0620,1053}
1977/01/24
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
New Turbocharger Pipe Assembly Used In Air Lines Group{1061}
1987/07/13
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
New Seal Used In Air Lines Group {1058}
1994/03/21
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/09
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
New Gaskets for the Turbocharger Oil Lines are Now Used {1052, 1307}
2005/06/27
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 637E :

TURBOCHARGER GP
4W-1434 TURBOCHARGER GP
TURBOCHARGER GP
362-0839 TURBOCHARGER GP
TURBOCHARGER GP
296-7634 TURBOCHARGER GP
TURBOCHARGER GP
260-3602 TURBOCHARGER GP
TURBOCHARGER GP
260-3602 TURBOCHARGER GP
SHIELD GP-MANIFOLD
126-6240 SHIELD GP-MANIFOLD
SHIELD GP-HEAT
222-0796 SHIELD GP-HEAT
PRECLEANER GP
7N-5974 PRECLEANER GP
CONTROL GP-GOVERNOR
123-5064 CONTROL GP-GOVERNOR
COVER GP-FUEL FILTER BASE
4N-7935 COVER GP-FUEL FILTER BASE
DRIVE GP-UNIT INJ HYD PUMP
125-3427 DRIVE GP-UNIT INJ HYD PUMP
DRIVE GP-UNIT INJ HYD PUMP
125-3428 DRIVE GP-UNIT INJ HYD PUMP
DRIVE GP-UNIT INJ HYD PUMP
125-3428 DRIVE GP-UNIT INJ HYD PUMP
DRIVE GP-UNIT INJ HYD PUMP
125-3428 DRIVE GP-UNIT INJ HYD PUMP
DRIVE GP-UNIT INJ HYD PUMP
125-3428 DRIVE GP-UNIT INJ HYD PUMP
DRIVE GP-UNIT INJ HYD PUMP
125-3428 DRIVE GP-UNIT INJ HYD PUMP

Truck sale:

Caterpillar 637E
 
Caterpillar 637E
- Scrapers
CASHMAN EQUIPMENT CO.
 
150,000 
Caterpillar 637E, Construction
- Scrapers
FOLEY EQUIPMENT COMPANY
Caterpillar 637E, Construction
65,000 
Caterpillar 637E, Construction
- Scrapers
FOLEY EQUIPMENT COMPANY
 
54,000 
Caterpillar 637E, Construction
- Scrapers
avspare
1989 CAT 637E
USD $79,900 
1989 CAT 637E

Ironhouse Machinery Inc.
Mississippi
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.