OPERATOR STATION
CONTROL GP-HYDRAULICCONTROL GP-STEERING
CONVERSION GP
OPERATOR STATION
CONTROL GP-HYDRAULIC
#SEBP25000550
107-3915: CONTROL GP-HYDRAULIC
107-3915 CONTROL GP-HYDRAULIC
S/N 2EN1-UP
RIPPER
PART OF 120-4852 CONTROL AR-HYDRAULIC
AN ATTACHMENT
S/N 2EN1-UP
RIPPER
PART OF 120-4852 CONTROL AR-HYDRAULIC
AN ATTACHMENT
For full view, you need register
Parts for your D7R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1M-1341 | [2] | END-YOKE ROD | |
| 2. | 2A-1736 | [1] | HANDLE | |
| 3. | 2D-1664 | [1] | STUD | |
| 4. | 2L-6267 | [2] | LOCKNUT (3/8-24-THD) | |
| 5. | 3B-4617 | [2] | PIN-COTTER | |
| 6. | 3T-9351 | [1] | SHAFT | |
| 7. | 3T-9361 | [1] | BRACKET AS | |
| 8. | 3W-7422 | [2] | LINK | |
| 9. | 5J-5315 | [2] | ROD END | |
| 10. | 5P-9209 | [6] | BEARING AS-NEEDLE | |
| 11. | 6T-8383 | [1] | BELLCRANK | |
| 12. | 6V-8183 | [4] | NUT-FULL (3/8-24-THD) | |
| 13. | 8E-5962 | [1] | PLATE | |
| (FOR USE ON MACHINES NOT EQUIPPED WITH CAB) | ||||
| -OR- | ||||
| 109-3590 | [1] | PLATE | ||
| (FOR USE ON MACHINES EQUIPPED WITH CAB) | ||||
| 14. | 8E-7364 | [1] | BOOT | |
| 15. | 8T-2637 | [1] | PIN-SPRING | |
| 16. | 8T-8932 | [2] | PIN AS-SPRING | |
| 17. | 9W-8747 | [2] | SPACER (10.5X15.82X44-MM THK) | |
| 18. | 9W-8780 | [1] | ROD | |
| 19. | 031-0220 | [1] | BOLT-LOCKING (3/8-16X2.5-IN) | |
| 20. | 039-6315 | [2] | PIN | |
| 21. | 102-9478 | [1] | FILM-INSTRUCTION (RIPPER CONTROL) | |
| 22. | 108-6106 | [1] | LEVER | |
| 23. | 127-4933 | [1] | LEVER | |
| 24. | 7X-0578 | [4] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 25. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 26. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 27. | 6J-0488 | [4] | SCREW-BUTTON HEAD (3/8-16X0.875-IN) | |
| 28. | 8T-9378 | [1] | BOLT (3/8-16X4-IN) | |
| 29. | 068-8579 | [1] | SPACER (11X25.4X36.6-MM THK) | |
#SEBP25000551
107-3911: CONTROL GP-HYDRAULIC HAND
107-3911 CONTROL GP-HYDRAULIC HAND
S/N 2EN1-490
LIFT & TILT
PART OF 108-2230 CONTROL AR-HYDRAULIC
S/N 2EN1-490
LIFT & TILT
PART OF 108-2230 CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your D7R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2L-6267 | [4] | LOCKNUT (3/8-24-THD) | |
| 2. | 3B-4615 | [4] | PIN-COTTER | |
| 3. | 3P-3676 | [1] | CLAMP | |
| 4. | 3T-9345 | [1] | BRACKET | |
| 5. | 3T-9351 | [1] | SHAFT | |
| 6. | 3W-7422 | [4] | LINK | |
| 7. | 5P-9209 | [8] | BEARING AS-NEEDLE | |
| 8. | 6B-6684 | [1] | NUT-FULL (1/2-20-THD) | |
| 9. | 6T-6953 | [1] | SHAFT AS | |
| 10. | 8E-5962 | [1] | PLATE | |
| 11. | 8E-6894 | [1] | HANDLE | |
| 12. | 8E-7364 | [1] | BOOT | |
| 13. | 8T-2637 | [1] | PIN-SPRING | |
| 14. | 9W-8747 | [2] | SPACER (10.5X15.82X44-MM THK) | |
| 15. | 031-0220 | [2] | BOLT-LOCKING (3/8-16X2.5-IN) | |
| 16. | 039-6315 | [4] | PIN | |
| 17. | 102-2913 | [1] | FILM-INSTRUCTION (BULLDOZER CONTROL) | |
| 18. | 108-6102 | [2] | BELLCRANK | |
| 19. | 108-6456 | [1] | PLATE AS | |
| 1F-5339 | [1] | LUG (3/8-16-THD) | ||
| 5V-7003 | [1] | BOSS-WELD | ||
| 20. | 109-3588 | [1] | CHANNEL AS | |
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 7T-1099 | [1] | LINK | ||
| 21. | 114-3914 | [1] | ROD AS | |
| 5J-5315 | [2] | ROD END | ||
| 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | ||
| 22. | 114-3915 | [1] | ROD AS | |
| 5J-5315 | [2] | ROD END | ||
| 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | ||
| 23. | 129-2974 | [1] | LEVER | |
| 24. | 7X-0578 | [4] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 25. | 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 26. | 8T-5360 | [3] | WASHER (12X22.5X2.5-MM THK) | |
| 27. | 4L-6454 | [6] | BOLT (3/8-16X1-IN) | |
| 28. | 4L-9337 | [1] | BOLT (3/8-16X1.5-IN) | |
| 29. | 6V-1193 | [4] | SCREW-HEX SOCKET (3/8-16X0.625-IN) | |
| 30. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 31. | 8T-9380 | [3] | BOLT (7/16-14X1-IN) |
#SEBP25000552
107-3911: CONTROL GP-HYDRAULIC HAND
107-3911 CONTROL GP-HYDRAULIC HAND
S/N 2EN491-953
LIFT & TILT
PART OF 108-2230 CONTROL AR-HYDRAULIC
S/N 2EN491-953
LIFT & TILT
PART OF 108-2230 CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your D7R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2L-6267 | [4] | LOCKNUT (3/8-24-THD) | |
| 2. | 3B-4615 | [4] | PIN-COTTER | |
| 3. | 3P-3676 | [1] | CLAMP | |
| 4. | 3T-9345 | [1] | BRACKET | |
| 5. | 3T-9351 | [1] | SHAFT | |
| 6. | 3W-7422 | [4] | LINK | |
| 7. | 5P-9209 | [8] | BEARING AS-NEEDLE | |
| 8. | 6B-6684 | [1] | NUT-FULL (1/2-20-THD) | |
| 9. | 3T-9346 | [1] | SHAFT AS | |
| 10. | 8E-5962 | [1] | PLATE | |
| 11. | 8E-6894 | [1] | HANDLE | |
| 12. | 8E-7364 | [1] | BOOT | |
| 13. | 8T-2637 | [1] | PIN-SPRING | |
| 14. | 9W-8747 | [2] | SPACER (10.5X15.82X44-MM THK) | |
| 15. | 031-0220 | [2] | BOLT-LOCKING (3/8-16X2.5-IN) | |
| 16. | 039-6315 | [4] | PIN | |
| 17. | 102-2913 | [1] | FILM-INSTRUCTION (BULLDOZER CONTROL) | |
| 18. | 108-6102 | [2] | BELLCRANK | |
| 19. | 147-8172 C | [1] | PLATE AS | |
| 8T-5912 | [1] | NUT-WELD (3/8-16-THD) | ||
| 1F-5339 | [1] | LUG (3/8-16-THD) | ||
| 5V-7003 | [1] | BOSS-WELD | ||
| 20. | 109-3588 | [1] | CHANNEL AS | |
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 7T-1099 | [1] | LINK | ||
| 21. | 114-3914 | [1] | ROD AS | |
| 5J-5315 | [2] | ROD END | ||
| 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | ||
| 22. | 114-3915 | [1] | ROD AS | |
| 5J-5315 | [2] | ROD END | ||
| 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | ||
| 23. | 129-2974 | [1] | LEVER | |
| 24. | 7X-0578 | [4] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 25. | 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 26. | 8T-5360 | [3] | WASHER (12X22.5X2.5-MM THK) | |
| 27. | 4L-6454 | [6] | BOLT (3/8-16X1-IN) | |
| 28. | 4L-9337 | [1] | BOLT (3/8-16X1.5-IN) | |
| 29. | 6V-1193 | [4] | SCREW-HEX SOCKET (3/8-16X0.625-IN) | |
| 30. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 31. | 8T-9380 | [3] | BOLT (7/16-14X1-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP25000553
107-3911: CONTROL GP-HYDRAULIC HAND
107-3911 CONTROL GP-HYDRAULIC HAND
S/N 2EN954-UP
LIFT & TILT
PART OF 108-2230 CONTROL AR-HYDRAULIC
S/N 2EN954-UP
LIFT & TILT
PART OF 108-2230 CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your D7R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2L-6267 | [4] | LOCKNUT (3/8-24-THD) | |
| 2. | 3B-4615 | [4] | PIN-COTTER | |
| 3. | 3P-3676 | [1] | CLAMP | |
| 4. | 3T-9345 | [1] | BRACKET | |
| 5. | 174-5733 C | [1] | SHAFT | |
| 6. | 3W-7422 | [4] | LINK | |
| 7. | 5P-9209 | [8] | BEARING AS-NEEDLE | |
| 8. | 6B-6684 | [1] | NUT-FULL (1/2-20-THD) | |
| 9. | 174-5732 C | [1] | SHAFT | |
| 10. | 8E-5962 | [1] | PLATE | |
| 11. | 8E-6894 | [1] | HANDLE | |
| 12. | 8E-7364 | [1] | BOOT | |
| 13. | 1H-1200 C | [1] | PIN-SPRING | |
| 14. | 9W-8747 | [2] | SPACER (10.5X15.82X44-MM THK) | |
| 15. | 031-0220 | [2] | BOLT-LOCKING (3/8-16X2.5-IN) | |
| 16. | 039-6315 | [4] | PIN | |
| 17. | 102-2913 | [1] | FILM-INSTRUCTION (BULLDOZER CONTROL) | |
| 18. | 108-6102 | [2] | BELLCRANK | |
| 19. | 147-8172 | [1] | PLATE AS | |
| 8T-5912 | [1] | NUT-WELD (3/8-16-THD) | ||
| 1F-5339 | [1] | LUG (3/8-16-THD) | ||
| 5V-7003 | [1] | BOSS-WELD | ||
| 20. | 109-3588 | [1] | CHANNEL AS | |
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 7T-1099 | [1] | LINK | ||
| 21. | 114-3914 | [1] | ROD AS | |
| 5J-5315 | [2] | ROD END | ||
| 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | ||
| 22. | 114-3915 | [1] | ROD AS | |
| 5J-5315 | [2] | ROD END | ||
| 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | ||
| 23. | 129-2974 | [1] | LEVER | |
| 24. | 7X-0578 | [4] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 25. | 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 26. | 8T-5360 | [3] | WASHER (12X22.5X2.5-MM THK) | |
| 27. | 4L-6454 | [6] | BOLT (3/8-16X1-IN) | |
| 28. | 4L-9337 | [1] | BOLT (3/8-16X1.5-IN) | |
| 29. | 6V-1193 | [4] | SCREW-HEX SOCKET (3/8-16X0.625-IN) | |
| 30. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 31. | 8T-9380 | [3] | BOLT (7/16-14X1-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP25000554
107-3903: CONTROL GP-STEERING
For full view, you need register
Parts for your D7R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1M-1341 | [2] | END-YOKE ROD | |
| 2. | 3B-4615 | [2] | PIN-COTTER | |
| 3. | 3E-4374 | [2] | STUD (3/8-24X3.15-IN) | |
| 4. | 3S-0004 | [4] | WASHER (0.406X0.728X0.09-IN THK) | |
| 5. | 3S-2093 | [3] | STRAP-CABLE | |
| 6. | 147-3510 | [1] | LINK | |
| 7. | 5P-9209 | [2] | BEARING AS-NEEDLE | |
| 8. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 9. | 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | |
| 10. | 7X-0440 | [4] | BOLT (5/16-18X1.75-IN) | |
| 11. | 8T-8932 | [2] | PIN AS-SPRING | |
| 12. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 13. | 9W-8747 | [1] | SPACER (10.5X15.82X44-MM THK) | |
| 14. | 9X-6772 | [2] | STRAP-CABLE | |
| 15. | 031-0220 | [1] | BOLT-LOCKING (3/8-16X2.5-IN) | |
| 16. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 17. | 107-3920 Y | [1] | CONTROL GP-STEERING & XMSN | |
| 18. | 108-6105 | [1] | BELLCRANK | |
| 19. | 109-0563 | [1] | CONTROL GP-UNPROGRAMMED | |
| 20. | 113-7628 | [1] | ROD | |
| 21. | 115-4371 | [1] | PLATE | |
| 22. | 133-3256 Y | [1] | VALVE GP-STEERING & BRAKE CONT | |
| 23. | 136-5186 | [1] | COVER | |
| 24. | 136-6093 | [1] | SEAL | |
| 25. | 136-2088 | [1] | HARNESS AS-STEERING | |
| 26. | 1A-5183 | [4] | BOLT (3/8-16X4.75-IN) | |
| 27. | 4P-7581 | [2] | CLIP (LADDER) | |
| 28. | 5P-1075 | [11] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 29. | 6J-0488 | [11] | SCREW-BUTTON HEAD (3/8-16X0.875-IN) | |
| 30. | 7X-0578 | [1] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 31. | 8M-5254 | [4] | SEAL-O-RING | |
| 32. | 9N-0869 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25000555
107-3903: CONTROL GP-STEERING
For full view, you need register
Parts for your D7R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1M-1341 | [2] | END-YOKE ROD | |
| 2. | 3B-4615 | [2] | PIN-COTTER | |
| 3. | 3E-4374 | [2] | STUD (3/8-24X3.15-IN) | |
| 4. | 3S-0004 | [4] | WASHER (0.406X0.728X0.09-IN THK) | |
| 5. | 3S-2093 | [3] | STRAP-CABLE | |
| 6. | 147-3510 | [1] | LINK | |
| 7. | 5P-9209 | [2] | BEARING AS-NEEDLE | |
| 8. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 9. | 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | |
| 10. | 7X-0440 | [4] | BOLT (5/16-18X1.75-IN) | |
| 11. | 8T-8932 | [2] | PIN AS-SPRING | |
| 12. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 13. | 9W-8747 | [1] | SPACER (10.5X15.82X44-MM THK) | |
| 14. | 9X-6772 | [2] | STRAP-CABLE | |
| 15. | 031-0220 | [1] | BOLT-LOCKING (3/8-16X2.5-IN) | |
| 16. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 17. | 107-3920 Y | [1] | CONTROL GP-STEERING & XMSN | |
| 18. | 108-6105 | [1] | BELLCRANK | |
| 19. | 160-1758 CY | [1] | CONTROL GP-UNPROGRAMMED | |
| 20. | 113-7628 | [1] | ROD | |
| 21. | 115-4371 | [1] | PLATE | |
| 22. | 133-3256 Y | [1] | VALVE GP-STEERING & BRAKE CONT | |
| 23. | 136-5186 | [1] | COVER | |
| 24. | 136-6093 | [1] | SEAL | |
| 25. | 136-2088 | [1] | HARNESS AS-STEERING | |
| 26. | 1A-5183 | [4] | BOLT (3/8-16X4.75-IN) | |
| 27. | 4P-7581 | [2] | CLIP (LADDER) | |
| 28. | 5P-1075 | [11] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 29. | 6J-0488 | [11] | SCREW-BUTTON HEAD (3/8-16X0.875-IN) | |
| 30. | 7X-0578 | [1] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 31. | 8M-5254 | [4] | SEAL-O-RING | |
| 32. | 9N-0869 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25000556
107-3903: CONTROL GP-STEERING
For full view, you need register
Parts for your D7R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1M-1341 | [2] | END-YOKE ROD | |
| 2. | 3B-4615 | [2] | PIN-COTTER | |
| 3. | 3E-4374 | [2] | STUD (3/8-24X3.15-IN) | |
| 4. | 3S-0004 | [4] | WASHER (0.406X0.728X0.09-IN THK) | |
| 5. | 3S-2093 | [3] | STRAP-CABLE | |
| 6. | 147-3510 | [1] | LINK | |
| 7. | 5P-9209 | [2] | BEARING AS-NEEDLE | |
| 8. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 9. | 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | |
| 10. | 7X-0440 | [4] | BOLT (5/16-18X1.75-IN) | |
| 11. | 8T-8932 | [2] | PIN AS-SPRING | |
| 12. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 13. | 9W-8747 | [1] | SPACER (10.5X15.82X44-MM THK) | |
| 14. | 9X-6772 | [2] | STRAP-CABLE | |
| 15. | 031-0220 | [1] | BOLT-LOCKING (3/8-16X2.5-IN) | |
| 16. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 17. | 107-3920 Y | [1] | CONTROL GP-STEERING & XMSN | |
| 18. | 108-6105 | [1] | BELLCRANK | |
| 19. | 172-9389 CY | [1] | CONTROL GP-UNPROGRAMMED | |
| 20. | 113-7628 | [1] | ROD | |
| 21. | 115-4371 | [1] | PLATE | |
| 22. | 133-3256 Y | [1] | VALVE GP-STEERING & BRAKE CONT | |
| 23. | 136-5186 | [1] | COVER | |
| 24. | 136-6093 | [1] | SEAL | |
| 25. | 136-2088 | [1] | HARNESS AS-STEERING | |
| 26. | 1A-5183 | [4] | BOLT (3/8-16X4.75-IN) | |
| 27. | 4P-7581 | [2] | CLIP (LADDER) | |
| 28. | 5P-1075 | [11] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 29. | 6J-0488 | [11] | SCREW-BUTTON HEAD (3/8-16X0.875-IN) | |
| 30. | 7X-0578 | [1] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 31. | 8M-5254 | [4] | SEAL-O-RING | |
| 32. | 9N-0869 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25000557
107-3903: CONTROL GP-STEERING
107-3903 CONTROL GP-STEERING
S/N 2EN1153-UP
PART OF 108-1643 POWER TRAIN AR
Type 1
S/N 2EN1153-UP
PART OF 108-1643 POWER TRAIN AR
Type 1
For full view, you need register
Parts for your D7R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1M-1341 | [2] | END-YOKE ROD | |
| 2. | 3B-4615 | [2] | PIN-COTTER | |
| 3. | 3E-4374 | [2] | STUD (3/8-24X3.15-IN) | |
| 4. | 3S-0004 | [4] | WASHER (0.406X0.728X0.09-IN THK) | |
| 5. | 3S-2093 | [3] | STRAP-CABLE | |
| 6. | 147-3510 | [1] | LINK | |
| 7. | 5P-9209 | [2] | BEARING AS-NEEDLE | |
| 8. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 9. | 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | |
| 10. | 7X-0440 | [4] | BOLT (5/16-18X1.75-IN) | |
| 11. | 8T-8932 | [2] | PIN AS-SPRING | |
| 12. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 13. | 9W-8747 | [1] | SPACER (10.5X15.82X44-MM THK) | |
| 14. | 9X-6772 | [2] | STRAP-CABLE | |
| 15. | 031-0220 | [1] | BOLT-LOCKING (3/8-16X2.5-IN) | |
| 16. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 17. | 107-3920 Y | [1] | CONTROL GP-STEERING & XMSN | |
| 18. | 108-6105 | [1] | BELLCRANK | |
| 19. | 172-9389 Y | [1] | CONTROL GP-UNPROGRAMMED | |
| 20. | 113-7628 | [1] | ROD | |
| 21. | 115-4371 | [1] | PLATE | |
| 22. | 172-2287 CY | [1] | VALVE GP-STEERING & BRAKE CONT | |
| 23. | 136-5186 | [1] | COVER | |
| 24. | 136-6093 | [1] | SEAL | |
| 25. | 136-2088 | [1] | HARNESS AS-STEERING | |
| 26. | 1A-5183 | [4] | BOLT (3/8-16X4.75-IN) | |
| 27. | 4P-7581 | [2] | CLIP (LADDER) | |
| 28. | 5P-1075 | [11] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 29. | 6J-0488 | [11] | SCREW-BUTTON HEAD (3/8-16X0.875-IN) | |
| 30. | 7X-0578 | [1] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 31. | 8M-5254 | [4] | SEAL-O-RING | |
| 32. | 9N-0869 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25000558
107-3903: CONTROL GP-STEERING
107-3903 CONTROL GP-STEERING
S/N 2EN1153-UP
PART OF 108-1643 POWER TRAIN AR
Type 2
S/N 2EN1153-UP
PART OF 108-1643 POWER TRAIN AR
Type 2
For full view, you need register
Parts for your D7R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1M-1341 | [2] | END-YOKE ROD | |
| 2. | 3B-4615 | [2] | PIN-COTTER | |
| 3. | 3E-4374 | [2] | STUD (3/8-24X3.15-IN) | |
| 4. | 3S-0004 | [4] | WASHER (0.406X0.728X0.09-IN THK) | |
| 5. | 3S-2093 | [1] | STRAP-CABLE | |
| 6. | 5P-9209 | [2] | BEARING AS-NEEDLE | |
| 7. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 8. | 6V-0852 | [1] | CAP-DUST (STEERING CONTROL VALVE FITTING) | |
| 9. | 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | |
| 10. | 7X-0440 | [4] | BOLT (5/16-18X1.75-IN) | |
| 11. | 8T-8932 | [2] | PIN AS-SPRING | |
| 12. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 13. | 9W-8747 | [1] | SPACER (10.5X15.82X44-MM THK) | |
| 14. | 9X-6772 | [2] | STRAP-CABLE | |
| 15. | 031-0220 | [1] | BOLT-LOCKING (3/8-16X2.5-IN) | |
| 16. | 107-3920 Y | [1] | CONTROL GP-STEERING & XMSN | |
| 17. | 108-6105 | [1] | BELLCRANK | |
| 18. | 113-7628 | [1] | ROD | |
| 19. | 115-4371 | [1] | PLATE | |
| 20. | 136-5186 | [1] | COVER | |
| 21. | 136-6093 | [1] | SEAL | |
| 22. | 147-3510 | [1] | LINK | |
| 23. | 172-9389 CY | [1] | CONTROL GP-UNPROGRAMMED | |
| 24. | 201-7273 Y | [1] | VALVE GP-STEERING & BRAKE CONT (DIFFERENTIAL STEERING) | |
| 25. | 136-2088 | [1] | HARNESS AS-STEERING (DIFFERENTIAL STEERING CONTROL) | |
| 26. | 1A-5183 | [4] | BOLT (3/8-16X4.75-IN) | |
| 27. | 2M-9780 | [1] | SEAL-O-RING | |
| 28. | 3J-1907 | [2] | SEAL-O-RING | |
| 29. | 4P-7581 | [2] | CLIP (LADDER) | |
| 30. | 5P-1075 | [11] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 31. | 5P-1404 | [1] | ADAPTER | |
| 32. | 6J-0488 | [11] | SCREW-BUTTON HEAD (3/8-16X0.875-IN) | |
| 33. | 6V-0484 | [1] | ELBOW | |
| 34. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 35. | 7X-0578 | [1] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 36. | 8M-5254 | [4] | SEAL-O-RING | |
| 37. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 38. | 9N-0869 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25000559
6Y-2258: CONVERSION AR-NON-ROPS
For full view, you need register
