BASIC ENGINE
PAN GP-OILPISTON & ROD GP
AIR COMPRESSOR GP
CYLINDER BLOCK GP
BASIC ENGINE
PAN GP-OIL
#SEBP25010250
4W-1873: PAN GP-OIL
4W-1873 PAN GP-OIL -ENGINE
S/N 3ER1-UP
HIGH CAPACITY
FOR USE WITH @@@@@ 4W-1895@@@@@
AN ATTACHMENT
S/N 3ER1-UP
HIGH CAPACITY
FOR USE WITH @@@@@ 4W-1895@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3406C INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1W-9113 | [1] | PAN-OIL (ENGINE) | |
| 2. | 2P-3203 | [40] | BOLT-WASHER HEAD (3/8-16X1.25-IN) | |
| 3. | 188-0210 | [1] | GASKET | |
| 4. | 8T-6761 | [3] | PLUG-PIPE (1-11-1/2 NPT THD) | |
| 5. | 9X-6451 | [1] | PLUG-DRAIN (MAGNETIC)(ENGINE OIL PAN) | |
| 6. | 061-9458 | [1] | SEAL-O-RING | |
| 7. | 307-2671 | [1] | PLUG AS | |
| 7A. | 214-7566 | [1] | SEAL-O-RING | |
| 9S-8002 | [1] | PLUG (7/16-20-THD) |
#SEBP25010251
108-8865: PISTON & ROD GP
For full view, you need register
Parts for your 3406C INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8N-1608 | [1] | PIN-PISTON | |
| 2. | 7E-5665 | [2] | RETAINER-PIN | |
| 3. | 7E-5996 | [1] | ROD AS-CONNECTING | |
| 4. | 7E-4195 M | [2] | BOLT-CONNECTING ROD (M16X1.5X97-MM) | |
| 219-4458 | [2] | PIN-DOWEL | ||
| 4P-8495 | [1] | BUSHING | ||
| 5. | 328-5573 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 7E-0558 AB | BEARING-CONNECTING ROD (0.635-MM US) | |||
| 7E-0559 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 6. | 116-8154 | [1] | BODY AS-PISTON | |
| 7. | 7N-7078 | [1] | RING-PISTON (OIL CONTROL) | |
| 8. | 2P-2817 | [1] | RING-PISTON (INTERMEDIATE) | |
| 9. | 134-3761 | [1] | RING-PISTON (TOP) | |
| 2P-2506 ABF | LUBRICANT-THREAD (ANTISEIZE COMPOUND) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP25010252
108-8865: PISTON & ROD GP
108-8865 PISTON & ROD GP
S/N 3ER12015-UP; 4GW546-UP
15.9 COMPRESSION RATIO
PART OF 375-9565 ENGINE AR-CORE
S/N 3ER12015-UP; 4GW546-UP
15.9 COMPRESSION RATIO
PART OF 375-9565 ENGINE AR-CORE
For full view, you need register
Parts for your 3406C INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8N-1608 | [1] | PIN-PISTON | |
| 2. | 7E-5665 | [2] | RETAINER-PIN | |
| 3. | 7E-5996 | [1] | ROD AS-CONNECTING | |
| 4. | 7E-4195 M | [2] | BOLT-CONNECTING ROD (M16X1.5X97-MM) | |
| 219-4458 | [2] | PIN-DOWEL | ||
| 4P-8495 | [1] | BUSHING | ||
| 5. | 328-5573 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 7E-0558 AB | BEARING-CONNECTING ROD (0.635-MM US) | |||
| 7E-0559 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 6. | 116-8154 | [1] | BODY AS-PISTON | |
| 7. | 7N-7078 | [1] | RING-PISTON (OIL CONTROL) | |
| 8. | 2P-2817 | [1] | RING-PISTON (INTERMEDIATE) | |
| 9. | 346-3340 C | [1] | RING-PISTON (TOP) | |
| 2P-2506 ABF | LUBRICANT-THREAD (ANTISEIZE COMPOUND) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP25010253
130-4614: PISTON & ROD GP
130-4614 PISTON & ROD GP
14.6:1 RATIO. JET AS-PISTON EFFECTIVE 4JK471-UP, 3ER3914-UP, 1LS720-UP, 4ZR4875-UP, 41Z3670-UP. FOR ALL OTHER SERIAL NUMBERS, REFER TO CYLINDER BLOCK GP FOR CORRECT JET AS-PISTON.
PART OF 375-6184, 386-2101 ENGINE AR-CORE
14.6:1 RATIO. JET AS-PISTON EFFECTIVE 4JK471-UP, 3ER3914-UP, 1LS720-UP, 4ZR4875-UP, 41Z3670-UP. FOR ALL OTHER SERIAL NUMBERS, REFER TO CYLINDER BLOCK GP FOR CORRECT JET AS-PISTON.
PART OF 375-6184, 386-2101 ENGINE AR-CORE
For full view, you need register
Parts for your 3406C INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 125-8869 J | [1] | CROWN AS-PISTON | |
| 2. | 130-0241 J | [1] | SKIRT-PISTON | |
| 3. | 524-5613 | [1] | PIN-PISTON | |
| 4. | 7E-1177 J | [2] | RETAINER-PIN | |
| 5. | 9Y-6054 | [1] | ROD AS-CONNECTING | |
| 5A. | 219-4458 | [2] | PIN-DOWEL | |
| 5B. | 7E-4195 M | [2] | BOLT-CONNECTING ROD (M16X1.5X97-MM) | |
| 5C. | 4P-7377 | [1] | BUSHING | |
| 6. | 328-5573 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 7E-0558 AB | BEARING-CONNECTING ROD (0.635-MM US) | |||
| 7E-0559 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 7. | 134-3761 J | [1] | RING-PISTON (TOP) | |
| 8. | 2P-2817 J | [1] | RING-PISTON (INTERMEDIATE) | |
| 9. | 7N-7078 J | [1] | RING-PISTON (OIL CONTROL) | |
| 10. | 151-5925 | [1] | BOLT (7/16-14-THD) | |
| 11. | 277-3076 | [1] | TUBE AS-OIL JET | |
| AVAILABLE REPAIR KIT(S): | ||||
| 473-9630 J | [1] | KIT-ENGINE CYLINDER REPAIR | ||
| (INCLUDES BEARING-SLEEVE, CYLINDER-LINER, & SINGLE CYLINDER LINER GASKET KIT.) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP25010254
316-6379: PLUG GP-AIR COMPRESSOR
316-6379 PLUG GP-AIR COMPRESSOR
FOR USE WITH @@@@@147-7369@@@@@, @@@@@ 1N-2991@@@@@
AN ATTACHMENT
FOR USE WITH @@@@@147-7369@@@@@, @@@@@ 1N-2991@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3406C INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-6767 | [1] | PLUG-PIPE (3/8-18-THD) |
#SEBP25010255
109-1222: PLUG GP-CYLINDER BLOCK
109-1222 PLUG GP-CYLINDER BLOCK
S/N 3ER1-UP
FOR USE WITH OIL LEVEL GAUGE GUIDE LOCATIONS THAT ARE NOT USED
AN ATTACHMENT
S/N 3ER1-UP
FOR USE WITH OIL LEVEL GAUGE GUIDE LOCATIONS THAT ARE NOT USED
AN ATTACHMENT
For full view, you need register
Parts for your 3406C INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 165-6170 | [4] | PLUG |
#SEBP25010256
331-0987: PLUG GP-CYLINDER BLOCK
331-0987 PLUG GP-CYLINDER BLOCK
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your 3406C INDUSTRIAL ENGINE:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 165-6170 | [2] | PLUG |
#SEBP25010257
375-4672: PLUG GP-CYLINDER BLOCK
375-4672 PLUG GP-CYLINDER BLOCK
S/N 4GW1-UP
PROVIDES PLUG GROUP FOR 3406C MACHINE ENGINE APPLICATION
FOR USE WITH AIR COMPRESSOR LINES GROUP
S/N 4GW1-UP
PROVIDES PLUG GROUP FOR 3406C MACHINE ENGINE APPLICATION
FOR USE WITH AIR COMPRESSOR LINES GROUP
For full view, you need register
#SEBP25010258
375-4737: PLUG GP-CYLINDER BLOCK
375-4737 PLUG GP-CYLINDER BLOCK
CANNOT BE USED WITH LINES GP-AIR COMPRESSOR
ALSO AN ATTACHMENT
CANNOT BE USED WITH LINES GP-AIR COMPRESSOR
ALSO AN ATTACHMENT
For full view, you need register
#SEBP25010259
392-1029: PLUG GP-CYLINDER BLOCK
392-1029 PLUG GP-CYLINDER BLOCK
FOR USE WITH REAR MOUNT LINES GP.-TURBOCHARGER WITHOUT LINES GP.-AIR COMPRESSOR
ALSO AN ATTACHMENT
FOR USE WITH REAR MOUNT LINES GP.-TURBOCHARGER WITHOUT LINES GP.-AIR COMPRESSOR
ALSO AN ATTACHMENT
For full view, you need register
Information:
Caterpillar Parts SIS Catalog 3406C :
Truck sale:
65,000
Caterpillar 3406C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
43,000
Caterpillar 3406C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
