AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7N-8411 AIR COMPRESSOR GP PROVIDES A 12 CFM GEAR DRIVEN COMPRESSOR ACCESSORY DRIVE AND COMPRESSOR LINES, WHICH MOUNTS OFF REAR SIDE OF FLYWHEEL HOUSING FOR USE WITH TOP MOUNTED TURBOCHARGERS AN ATTACHMENT 3408C


BASIC ENGINE
AIR COMPRESSOR GP
BALANCER GP
CRANKSHAFT GP
CAMSHAFT GP
CLUTCH GP

INDUSTRIAL ENGINE 3408C INDUSTRIAL ENGINE 9ER
 3408C Industrial Engine 9ER00001-UP SEBP2502 3408C 9ER   (1996)

BASIC ENGINE

AIR COMPRESSOR GP
AIR COMPRESSOR GP
7N-7700 AIR COMPRESSOR GP
AIR COMPRESSOR GP
7N-7722 AIR COMPRESSOR GP
7N-8411 AIR COMPRESSOR GP
AIR COMPRESSOR GP
9N-5563 AIR COMPRESSOR GP
GOVERNOR GP-AIR COMPRESSOR
4N-9680 GOVERNOR GP-AIR COMPRESSOR
GOVERNOR GP-AIR COMPRESSOR
7E-4832 GOVERNOR GP-AIR COMPRESSOR
 

#SEBP25020020
 

7N-8411: AIR COMPRESSOR GP

7N-8411 AIR COMPRESSOR GP
PROVIDES A 12 CFM GEAR DRIVEN COMPRESSOR ACCESSORY DRIVE AND COMPRESSOR LINES, WHICH MOUNTS OFF REAR SIDE OF FLYWHEEL HOUSING
FOR USE WITH TOP MOUNTED TURBOCHARGERS
AN ATTACHMENT
i00410927 SEBP2502
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7N-7722 Y [1] AIR COMPRESSOR GP  
  9N-0725 Y [1] DRIVE GP-ACCESSORY  
  7N-8230 Y [1] LINES GP-AIR COMPRESSOR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25020021
 

9N-5563: AIR COMPRESSOR GP

9N-5563 AIR COMPRESSOR GP
PART OF 2W-2624 AIR COMPRESSOR GP
AN ATTACHMENT
i00438332 SEBP2502
9N5563 AIR COMPRESSOR GP Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9322 [1] GEAR-COMPRESSOR DRIVE (46-TEETH)  
2. 6L-5362 [1] GASKET  
3. 1H-6666 [1] COVER  
4. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 1F-7958 [3] NUT-FULL (1/2-13-THD)  
  2M-0849 [3] WASHER-HARD (13.5X25.5X5-MM THK)  
6. 1L-4076 [2] STUD (1/2-13X3.54-IN)  
7. 2W-5134 CY [1] AIR COMPRESSOR GP  
8. 3H-5175 [1] GASKET  
9. 0S-1616 [5] BOLT (1/4-20X1-IN)  
10. 5P-0537 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
11. 2A-4781 [1] BOLT (1/4-20X2.75-IN)  
12. 4N-6005 [1] COVER  
13. 9N-5618 [1] TUBE  
14. 114-2687 C [2] SEAL-O-RING  
15. 5P-8940 [1] SEAL-O-RING  
16. 6B-6683 [1] NUT (5/8-18-THD)  
  9H-1024 [1] WASHER-HARD (17X30X6-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25020022
 

4N-1092: BALANCER GP

4N-1092 BALANCER GP
ALSO AN ATTACHMENT
i00093405 SEBP2502
4N1092 BALANCER GP Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 [4] BOLT (3/8-16X0.875-IN)  
2. 1W-4449 C [1] SHAFT-BALANCE WEIGHT  
3. 4N-1018 [1] GEAR AS-WEIGHT (43-TEETH)  
  4S-9487 [1] DOWEL  
4. 4N-1015 [1] BUSHING  
5. 1B-7182 C [1] BOLT (5/16-18X1.25-IN)  
6. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
7. 4N-6576 [1] PLATE-THRUST  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25020023
 

196-9524: BEARING GP-MAIN

196-9524 BEARING GP-MAIN
FIELD INSTALLATION
i02652833 SEBP2502
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  317-8766 [5] BEARING-MAIN (STANDARD)  
  4W-5698 AB BEARING-MAIN (0.63-MM US)  
  4W-5699 AB BEARING-MAIN (1.27-MM US)  
  4W-5700 AB BEARING-MAIN (0.63-MM OS)  
  4W-5701 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
  253-1752 [2] PLATE-THRUST  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP25020024
 

4N-0963: CAMSHAFT GP

4N-0963 CAMSHAFT GP
SINGLE
ALSO AN ATTACHMENT
i00107903 SEBP2502
4N0963 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7980 C [1] CAMSHAFT AS  
2. 101-3374 [1] GEAR (86-TEETH)  
3. 1B-8705 [1] KEY-WOODRUFF  
4. 4N-0955 [1] DOWEL  
5. 0S-0509 [2] BOLT (3/8-16X0.75-IN)  
6. 4N-0342 [1] PLATE  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25020025
 

1W-8856: CLUTCH GP

1W-8856 CLUTCH GP
PART OF 1W-8857 POWER TAKE-OFF GP
AN ATTACHMENT
i00354121 SEBP2502
1W8856 CLUTCH GP Parts scheme 1W8856 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1L-7796 [1] KEY  
2. 1L-5015 [1] PLATE-CLUTCH  
3. 4L-3527 [3] PLATE-CLUTCH DRIVING  
4. 3N-8125 [1] PLATE AS-PRESSURE  
  3N-8124 [1] SPRING  
  3N-8123 [1] LOCK PIN  
5. 3F-3728 [1] RING-SNAP  
6. 1L-4863 [8] WASHER-SPRING  
7. 6L-3972 [4] PIN  
8. 4H-0002 [4] LEVER  
9. 6L-3961 [4] PIN-COTTER  
10. 4B-4721 [8] LINK  
11. 6L-3967 [8] PIN  
12. 6L-3964 [8] PIN-COTTER  
13. 5B-2410 [1] HOSE AS  
14. 4B-4716 [1] COLLAR AS-SLEEVE  
  0L-0639 [2] BOLT (3/8-24X2.25-IN)  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
  4B-4758 B [2] SHIM (0.06-IN THK)  
15. 6B-3223 [2] CUP-BEARING  
16. 4B-7270 [2] CONE-BEARING  
17. 4B-4764 [1] NUT  
18. 4B-4773 [1] LOCK  
19. 5L-3486 [1] RING-DRIVE  
20. 3H-9571 [2] PLATE-CENTER  
21. 3H-9572 [1] RING-ADJUSTMENT  
22. 3H-9574 [1] SLEEVE (SLIDING)  
23. 4B-4792 [1] YOKE AS  
  0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  3B-4506 [2] LOCKWASHER  
24. 6L-5151 [2] KEY-WOODRUFF  
25. 3L-0648 [1] SHAFT-OPERATING  
26. 5B-2404 [1] RETAINER-BEARING  
27. 5B-2407 [1] LOCK  
28. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
  3F-9556 [1] LOCKWASHER  
29. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
30. 6F-0253 [1] LOCKWASHER  
31. 9S-1354 [1] NUT (5/8-18-THD)  
32. 0S-1587 [2] BOLT (1/2-13X1.75-IN)  
33. 1L-6931 [2] SCREW AS-MACHINE (1/4-20X0.5-IN)  
34. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
35. 1A-1460 [4] BOLT (1/2-13X2-IN)  
36. 3B-4508 [6] LOCKWASHER  
37. 5B-2406 [1] CARRIER  
38. 5N-1932 [1] SHAFT-CLUTCH  
39. 1L-5014 [1] HOUSING-CLUTCH  
40. 4B-4810 [1] LEVER AS-HAND  
41. 0S-1587 [1] BOLT (1/2-13X1.75-IN)  
42. 108-3561 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
  B   USE AS REQUIRED
 

#SEBP25020026
 

4P-0410: CLUTCH GP

4P-0410 CLUTCH GP
PART OF 4P-3127 POWER TAKE-OFF GP
AN ATTACHMENT
i00371359 SEBP2502
4P0410 CLUTCH GP Parts scheme 4P0410 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
2. 6F-0253 [1] LOCKWASHER  
3. 9S-1354 [1] NUT (5/8-18-THD)  
4. 0S-1587 [2] BOLT (1/2-13X1.75-IN)  
5. 1S-7443 [2] SCREW-MACHINE  
6. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
7. 1A-1460 [4] BOLT (1/2-13X2-IN)  
8. 5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 5B-2406 [1] CARRIER  
10. 5N-1932 [1] SHAFT-CLUTCH  
11. 4L-3528 [1] HOUSING-CLUTCH  
12. 4W-2653 [1] LEVER AS-HAND  
  0S-1587 [1] BOLT (1/2-13X1.75-IN)  
13. 5B-2410 [1] HOSE AS  
14. 108-3561 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
15. 1H-3338 [2] LOCKWASHER (EXTERNAL TOOTH)  
16. 108-3560 [1] PLATE-WARNING (POWER TAKE-OFF)  
17. 1L-7796 [1] KEY  
18. 1L-5015 [1] PLATE-CLUTCH  
19. 4L-3527 [3] PLATE-CLUTCH DRIVING  
20. 3N-8125 [1] PLATE AS-PRESSURE  
  3N-8123 [1] LOCK PIN  
  3N-8124 [1] SPRING  
21. 1L-4863 [8] WASHER-SPRING  
22. 6L-3972 [4] PIN  
23. 4H-0002 [4] LEVER  
24. 3B-4627 [4] PIN-COTTER  
25. 4B-4721 [8] LINK  
26. 6L-3967 [8] PIN  
27. 3B-5301 [8] PIN-COTTER  
28. 4B-4716 [1] COLLAR AS-SLEEVE  
29. 0L-0639 [2] BOLT (3/8-24X2.25-IN)  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
  4B-4758 B [2] SHIM (0.06-IN THK)  
30. 6B-3223 [2] CUP-BEARING  
31. 4B-7270 [2] CONE-BEARING  
32. 4B-4764 [1] NUT  
33. 4B-4773 [1] LOCK  
34. 5L-3486 [1] RING-DRIVE  
35. 3H-9571 [2] PLATE-CENTER  
36. 3H-9572 [1] RING-ADJUSTMENT  
37. 3H-9574 [1] SLEEVE  
38. 4B-4792 [1] YOKE AS  
39. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  3B-4506 [2] LOCKWASHER  
40. 6L-5151 [2] KEY-WOODRUFF  
41. 4B-4770 [1] SHAFT  
42. 5B-2404 [1] RETAINER-BEARING  
43. 5B-2407 [1] LOCK  
44. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
45. 3F-9556 [1] LOCKWASHER  
46. 3F-3728 [1] RING-SNAP  
  B   USE AS REQUIRED
 

#SEBP25020027
 

4P-3068: CLUTCH GP

4P-3068 CLUTCH GP
PART OF 4P-3069 POWER TAKE-OFF GP
AN ATTACHMENT
i00375409 SEBP2502
4P3068 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-8460 [1] RING-DRIVE  
2. 7C-8373 [1] SHAFT-STUB  
3. 8L-5159 [1] BALL BEARING  
4. 1A-8063 [1] BOLT (3/4-10X2.5-IN)  
5. 7C-3872 [1] WASHER-RETAINING  
6. 7C-3871 B [1] SHIM-RETAINER (0.13-MM THK)  
  7C-3877 B [1] SHIM-RETAINER (0.18-MM THK)  
  7C-3878 B [1] SHIM-RETAINER (0.51-MM THK)  
7. 7W-7535 [1] HUB  
8. 5N-6136 [3] PLATE-DRIVE  
9. 8L-8462 [2] PLATE AS-CENTER  
10. 8L-8459 [1] PLATE-PRESSURE  
11. 6L-3963 [4] PIN-COTTER  
12. 8L-5107 [4] LEVER  
13. 8L-5188 [4] PIN  
14. 8L-8457 [1] YOKE-ADJUSTMENT  
15. 6L-3962 [8] PIN-COTTER  
16. 8L-5095 [8] LINK-LEVER  
17. 8L-5200 [4] PIN  
18. 8L-5199 [4] PIN  
19. 8L-8458 [1] SLEEVE-SLIDING  
20. 8L-5105 [1] COLLAR AS-SLEEVE  
21. 2K-0564 [2] LOCKNUT (1/2-20-THD)  
22. 8L-5186 B [2] SHIM (0.06-IN THK)  
23. 0V-0375 [2] BOLT (1/2-13X3.25-IN)  
24. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
25. 9S-1354 [1] NUT (5/8-18-THD)  
26. 6F-0253 [1] LOCKWASHER  
27. 4M-5317 [1] BUSHING-REDUCER  
28. 8L-5096 [1] HOSE AS  
29. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
30. 2W-7879 [1] HOUSING-CLUTCH  
31. 8L-5094 [1] RING-COLLAR  
32. 1C-0569 [2] BOLT (5/16-18X0.5-IN)  
33. 8L-5679 [1] RING-RETAINING  
34. 3N-1462 [1] PIN AS  
35. 3N-1461 [1] SPRING  
36. 2H-3755 [1] BOLT (5/16-18X0.43-IN)  
37. 5B-2407 [1] LOCK  
38. 8L-5099 [1] RETAINER-BEARING  
39. 1B-8702 [1] KEY-WOODRUFF  
40. 6V-8234 [1] PIN-SPRING  
41. 5D-7449 [2] CUP-BEARING  
42. 6B-8575 [1] KEY-SQUARE  
43. 7W-7534 [1] SHAFT  
44. 9Y-4298 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
45. 4F-7499 [2] CONE-BEARING  
46. 4B-9782 [1] BALL  
47. 2W-7878 [1] CARRIER AS-BEARING  
48. 0S-1625 [8] BOLT (5/8-11X2.5-IN)  
49. 2W-4905 [2] RING-SEAL  
50. 2B-0858 [2] PLUG-PIPE  
51. 7H-3171 [1] PLUG-PIPE  
52. 4W-2655 [1] LEVER-HAND CONTROL  
53. 2W-7876 [1] FORK-THROW-OUT  
54. 1D-4539 [1] BOLT (5/16-18X2.5-IN)  
55. 8L-5101 [1] SHAFT  
56. 1B-8737 [2] KEY-WOODRUFF  
  B   USE AS REQUIRED
 

#SEBP25020028
 

4P-3073: CLUTCH GP

4P-3073 CLUTCH GP
PART OF 4P-3074 POWER TAKE-OFF GP
FOR USE WITH SAE NO. 1 FLYWHEEL AND FLYWHEEL HOUSING
AN ATTACHMENT
i00375417 SEBP2502
4P3073 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-3527 [2] PLATE-CLUTCH DRIVING  
2. 5L-9652 [1] HUB  
3. 8B-7987 [1] KEY-WOODRUFF  
4. 5L-9653 [1] NUT  
  5L-9654 [1] LOCK  
5. 3H-9571 [1] PLATE-CENTER  
6. 5N-9317 [1] RING-DRIVE  
7. 7F-8897 [1] PLATE  
8. 3H-9572 [1] RING-ADJUSTMENT  
9. 3H-9574 [1] SLEEVE  
10. 4B-4754 [1] SHAFT  
  6L-5151 [2] KEY-WOODRUFF  
11. 4B-4792 [1] YOKE AS  
12. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  3B-4506 [2] LOCKWASHER  
13. 1A-1460 [6] BOLT (1/2-13X2-IN)  
  5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 5L-9655 [1] RETAINER-BEARING  
15. 9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
16. 4B-4716 [1] COLLAR AS-SLEEVE  
17. 0L-0639 [2] BOLT (3/8-24X2.25-IN)  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
  4B-4758 B [2] SHIM (0.06-IN THK)  
18. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
  3F-9556 [1] LOCKWASHER  
  5B-2407 [1] LOCK  
19. 5B-2410 E [1] HOSE AS (38.1-CM)  
20. 4B-4721 [8] LINK  
  6L-3967 [8] PIN  
  3B-5301 [8] PIN-COTTER  
21. 6L-3972 [4] PIN  
  3B-4627 [4] PIN-COTTER  
  1L-4863 [8] WASHER-SPRING  
22. 4H-0002 [4] LEVER  
23. 108-3561 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)(SERVICING)  
24. 3N-8125 [1] PLATE AS-PRESSURE  
25. 3N-8124 [1] SPRING  
  3N-8123 [1] LOCK PIN  
26. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
27. 3N-4896 [1] SHAFT-CLUTCH  
28. 1S-7443 [4] SCREW-MACHINE  
  1H-3338 [4] LOCKWASHER (EXTERNAL TOOTH)  
29. 6B-3223 [2] CUP-BEARING  
30. 4B-7270 [2] CONE-BEARING  
31. 4B-4810 [1] LEVER AS-HAND  
32. 7F-8916 [1] CARRIER-BEARING  
33. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
34. 7W-7155 [1] HOUSING-CLUTCH  
35. 108-3560 [1] PLATE-WARNING (POWER TAKE-OFF)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP25020029
 

493-9450: CLUTCH GP-POWER TAKE-OFF

493-9450 CLUTCH GP-POWER TAKE-OFF
PART OF 521-2314 POWER TAKE-OFF GP
AN ATTACHMENT
i07000133 SEBP2502
4939450 CLUTCH GP-POWER TAKE-OFF Parts scheme 4939450 CLUTCH GP-POWER TAKE-OFF Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-2410 [1] HOSE AS  
2. 1L-6931 [2] SCREW AS-MACHINE (1/4-20X0.5-IN)  
3. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
4. 4B-7270 [2] CONE-BEARING  
5. 6B-3223 [2] CUP-BEARING  
6. 6L-5151 [2] KEY-WOODRUFF  
7. 8B-7121 [2] FITTING-HYDRAULIC  
8. 108-3560 [1] PLATE-WARNING (POWER TAKE-OFF)  
9. 108-3561 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
10. 276-0744 [2] CAP-PLUG  
11. [8] LINK  
12. [1] SLEEVE  
13. [1] LOCK  
14. [1] RING  
15. [1] PLATE-CENTER  
16. [4] LEVER-CLUTCH  
17. [2] PLATE  
18. [8] WASHER-SPRING  
19. [1] RETAINER-BEARING  
20. [1] PLATE AS  
  [1] SPRING-PIN  
  [1] PIN  
21. [1] COLLAR AS-SLEEVE  
  0L-1648 [2] BOLT (3/8-24X2.5-IN)  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
22. [1] YOKE AS  
  3B-4506 [2] LOCKWASHER  
  165-3929 [2] BOLT (3/8-16X1.5-IN)  
23. 492-0221 [1] LEVER AS-HAND  
  0S-1587 [1] BOLT (1/2-13X1.75-IN)  
24. [1] SHAFT-CLUTCH  
25. [1] SHAFT-CLUTCH  
26. [1] NUT  
27. [1] LOCK  
28. [1] RING-DRIVE  
29. [1] PLATE  
30. [1] CARRIER-BEARING  
31. [1] HOUSING-CLUTCH  
32. [1] KEY-WOODRUFF  
33. [1] HUB  
34. [4] CAP-GREASE  
35. 0S-1614 [2] BOLT (1/4-20X0.5-IN)  
36. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
37. 1A-1460 [6] BOLT (1/2-13X2-IN)  
38. 1H-3338 [2] LOCKWASHER (EXTERNAL TOOTH)  
39. 3B-4508 [6] LOCKWASHER  
40. 3B-4627 [4] PIN-COTTER  
41. 3B-5301 [8] PIN-COTTER  
42. 3F-9556 [1] LOCKWASHER  
43. 6F-0253 [1] LOCKWASHER  
44. 6L-3967 [8] PIN  
45. 6L-3972 [4] PIN  
46. 9S-1354 [1] NUT (5/8-18-THD)  
 

Information:

General Service Information
Tu-Flo 300 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 400, 500, 1000 Compressors
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 501 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 600 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 700 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Engine News
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Specifications
Air Compressor
3408C & 3412C INDUSTRIAL ENGINES
Service Magazine
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23

Caterpillar Parts SIS Catalog 3408C :

AIR COMPRESSOR GP
7N-7722 AIR COMPRESSOR GP
AIR COMPRESSOR GP
7N-7700 AIR COMPRESSOR GP
AIR COMPRESSOR GP
7N-2850 AIR COMPRESSOR GP
AIR COMPRESSOR GP
7N-2850 AIR COMPRESSOR GP
AIR COMPRESSOR GP
6N-3611 AIR COMPRESSOR GP
AIR COMPRESSOR GP
2W-5134 AIR COMPRESSOR GP
2W-2624 AIR COMPRESSOR GP
AIR COMPRESSOR GP
126-6110 AIR COMPRESSOR GP
AIR COMPRESSOR GP
9N-5563 AIR COMPRESSOR GP
BALANCER GP
4N-1092 BALANCER GP
196-9524 BEARING GP-MAIN
CAMSHAFT GP
4N-0963 CAMSHAFT GP
CLUTCH GP
1W-8856 CLUTCH GP
CLUTCH GP
4P-0410 CLUTCH GP
CLUTCH GP
4P-3068 CLUTCH GP
CLUTCH GP
4P-3073 CLUTCH GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.