AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-7005 CYLINDER HEAD GP S/N 9ER424-UP ALSO AN ATTACHMENT 3408C INDUSTRIAL ENGINE


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP
DRIVE GP-ACCESSORY
DRIVE GP-AUXILIARY
DRIVE GP-FAN

INDUSTRIAL ENGINE 3408C INDUSTRIAL ENGINE 9ER
 3408C Industrial Engine 9ER00001-UP SEBP2502 3408C 9ER   (1996)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD AS
105-3788 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0040 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0041 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2225 CYLINDER HEAD AS
CYLINDER HEAD GP
141-1207 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-7005 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-7005 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2224 CYLINDER HEAD GP
 

#SEBP25020060
 

4W-7005: CYLINDER HEAD GP

4W-7005 CYLINDER HEAD GP
S/N 9ER424-UP
ALSO AN ATTACHMENT
i00566855 SEBP2502
4W7005 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8071 [1] BRACKET-FUEL PUMP  
2. 3B-1915 [1] BOLT (3/8-16X1.375-IN)  
3. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 0S-1608 [1] BOLT (3/8-16X3.75-IN)  
5. 1A-5183 [2] BOLT (3/8-16X4.75-IN)  
6. 5B-2638 [2] BOLT (3/8-16X5.25-IN)  
7. 6N-6731 [1] SUPPORT-HOUSING (LH)  
8. 283-5666 [2] GASKET-CYLINDER HEAD  
9. 7W-8301 [28] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  124-1855 [1] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
11. 141-1207 YC [2] CYLINDER HEAD GP  
12. 0L-1352 [7] BOLT (3/8-16X3.25-IN)  
13. 8T-6764 [2] PLUG-PIPE (1/8-27-THD)  
14. 0L-1352 B [4] BOLT (3/8-16X3.25-IN)  
15. 4N-0932 B [2] PLUG-CUP  
16. 5P-0063 B [4] PLUG-CUP  
17. 100-6920 [8] ADAPTER-NOZZLE  
18. 359-1439 [32] SEAL AS-WATER  
19. 106-1792 [16] STUD-TAPERLOCK (3/8-16X4-IN)  
20. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
21. 8T-6762 [6] PLUG-PIPE (1/2-14-THD)  
22. 4N-7253 [8] GASKET-CHAMBER  
23. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
24. 6N-6732 [1] SUPPORT-HOUSING (RH)  
25. 8S-9191 [2] BOLT (3/8-16X4-IN)  
26. 1W-5207 [1] BRACKET-FUEL PUMP  
27. 7L-4774 [8] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25020061
 

7W-2224: CYLINDER HEAD GP

7W-2224 CYLINDER HEAD GP
S/N 9ER1-423
PART OF 4W-7005 CYLINDER HEAD GP
i00108212 SEBP2502
7W2224 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-3788 CY [1] CYLINDER HEAD AS  
2. 115-2368 [8] VALVE-INLET  
3. 2N-5775 [8] DOWEL  
4. 2A-4429 [32] LOCK-RETAINER  
5. 6N-7175 [16] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7174 [1] SHIELD-OIL  
6. 4N-5906 [16] SPRING-VALVE  
7. 115-2367 [8] VALVE-EXHAUST  
8. 173-7188 [16] GUIDE-VALVE (STANDARD)  
  7C-5306 AB GUIDE-VALVE (0.51-MM OS)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25020062
 

5N-5322: DAMPER & PULLEY GP

5N-5322 DAMPER & PULLEY GP
CANNOT BE USED WITH FRONT CRANKSHAFT MOUNTED ATTACHMENT
AN ATTACHMENT
i00385434 SEBP2502
5N5322 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-4399 [1] PULLEY (2-GROOVE)  
2. 167-8130 [1] DAMPER AS  
3. 6N-4400 [1] ADAPTER  
4. 0S-1587 [12] BOLT (1/2-13X1.75-IN)  
5. 1B-7538 [9] BOLT (5/8-18X5.75-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25020063
 

8N-5572: DAMPER & PULLEY GP

8N-5572 DAMPER & PULLEY GP
FOR USE WITH 1000 HP CSFS MARINE ENGINES
ALSO AN ATTACHMENT
i00431413 SEBP2502
8N5572 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7787 [1] ADAPTER-DAMPER  
2. 167-8130 [1] DAMPER AS  
3. 3N-9540 [1] PULLEY (1-GROOVE)  
4. 2D-8155 [12] STUD-TAPERLOCK (1/2-13X3.58-IN)  
5. 1F-7958 [12] NUT-FULL (1/2-13-THD)  
6. 5P-9266 [12] BOLT-12 POINT HEAD (5/8-18X5.25-IN)  
7. 6N-7785 [1] PULLEY (5-GROOVE)  
    -OR-
  6N-7786 A [1] PULLEY (6-GROOVE)  
  A   NOT PART OF THIS GROUP
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25020064
 

9Y-0651: DAMPER & PULLEY GP

9Y-0651 DAMPER & PULLEY GP
FOR USE WITH FIRE PUMP WITH WATER COOLED MANIFOLDS
AN ATTACHMENT
i00437070 SEBP2502
9Y0651 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7787 [1] ADAPTER-DAMPER  
2. 167-8130 [1] DAMPER AS  
3. 3N-9540 [1] PULLEY (1-GROOVE)(1 GROOVE)  
4. 3D-0472 [12] STUD-TAPERLOCK (1/2-13X2.80-IN)  
5. 1F-7958 [12] NUT-FULL (1/2-13-THD)  
6. 5P-9266 [12] BOLT-12 POINT HEAD (5/8-18X5.25-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25020065
 

9N-0725: DRIVE GP-ACCESSORY

9N-0725 DRIVE GP-ACCESSORY
PART OF 7N-8411 AIR COMPRESSOR GP
AN ATTACHMENT
i00093492 SEBP2502
9N0725 DRIVE GP-ACCESSORY Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9322 C [1] GEAR-COMPRESSOR DRIVE (46-TEETH)  
2. 9L-5961 [1] ADAPTER-COMPRESSOR DRIVE  
3. 5P-8940 C [1] SEAL-O-RING  
4. 6B-6683 C [1] NUT (5/8-18-THD)  
  9H-1024 C [1] WASHER-HARD (17X30X6-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25020066
 

4N-8505: DRIVE GP-AUXILIARY

4N-8505 DRIVE GP-AUXILIARY
RH REAR - 3 GROOVE PULLEY
AN ATTACHMENT
i00371037 SEBP2502
4N8505 DRIVE GP-AUXILIARY Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
  4D-3704 [1] WASHER-HARD (17X30X5-MM THK)  
2. 4N-8787 [1] GEAR-AUXILIARY DRIVE (46 TEETH)  
3. 5P-8940 [1] SEAL-O-RING  
4. 4N-8788 [1] HOUSING-AUXILIARY DRIVE  
5. 2D-5658 [1] BALL BEARING  
6. 2H-3777 C [1] LOCKNUT (1-5/8-18-THD)  
7. 1K-6985 [1] RING-RETAINING  
8. 1B-4117 [1] BALL BEARING  
9. 3J-0365 C [1] SEAL-LIP TYPE  
10. 4N-8462 [1] PULLEY-AUXILIARY DRIVE (3-GROOVE)  
11. 2M-1538 [5] STUD-TAPERLOCK (3/8-16X1.6-IN)  
  9S-8752 [5] NUT-FULL (3/8-16-THD)  
  5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 2W-7917 C [1] SHAFT-AUXILIARY DRIVE  
13. 0L-1352 [2] BOLT (3/8-16X3.25-IN)  
14. 8J-8322 [1] RING-RETAINING  
15. 5F-8916 C [1] LOCKWASHER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25020067
 

7N-8750: DRIVE GP-AUXILIARY

7N-8750 DRIVE GP-AUXILIARY
3 GROOVE PULLEY
CANNOT BE USED WITH HEAT EXCHANGER COOLED ENGINE
AN ATTACHMENT
i00411127 SEBP2502
7N8750 DRIVE GP-AUXILIARY Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6B-6683 [1] NUT (5/8-18-THD)  
2. 2W-5275 [1] GEAR (43-TEETH)  
3. 6V-5101 [1] SEAL-O-RING  
4. 4M-6107 [1] BEARING-INNER  
5. 8T-0209 [1] RACE-ROLLER BEARING  
6. 1K-6985 [1] RING-RETAINING (INTERNAL)  
7. 1B-4117 [1] BALL BEARING  
8. 7N-8751 [1] PULLEY-AUXILIARY DRIVE (3-GROOVE)  
9. 3J-0365 [1] SEAL-LIP TYPE  
10. 8T-5409 [5] STUD-TAPERLOCK (3/8-16X1.57-IN)  
11. 2W-7917 [1] SHAFT-AUXILIARY DRIVE  
12. 2W-3262 [1] HOUSING-AUXILIARY DRIVE  
13. 0T-0573 [1] BOLT (3/8-16X2.75-IN)  
14. 8L-9811 [1] RING-RETAINING  
15. 5F-8916 [1] LOCKWASHER  
16. 2H-3777 [1] LOCKNUT (1-5/8-18-THD)  
17. 7X-0513 [1] WASHER-HARD (17X30X5-MM THK)  
18. 6V-8801 [5] NUT (3/8-16-THD)  
19. 8T-4896 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP25020068
 

7N-8881: DRIVE GP-AUXILIARY

7N-8881 DRIVE GP-AUXILIARY
2 GROOVE PULLEY
CANNOT BE USED WITH HEAT EXCHANGER COOLED ENGINE
AN ATTACHMENT
i00411239 SEBP2502
7N8881 DRIVE GP-AUXILIARY Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6B-6683 [1] NUT (5/8-18-THD)  
2. 2W-5275 [1] GEAR (43-TEETH)  
3. 6V-5101 [1] SEAL-O-RING  
4. 2W-3262 [1] HOUSING-AUXILIARY DRIVE  
5. 4M-6107 [1] BEARING-INNER  
6. 5F-8916 [1] LOCKWASHER  
7. 1K-6985 [1] RING-RETAINING (INTERNAL)  
8. 1B-4117 [1] BALL BEARING  
9. 3J-0365 [1] SEAL-LIP TYPE  
10. 7N-8880 [1] PULLEY (2-GROOVE)  
11. 2M-1538 [5] STUD-TAPERLOCK (3/8-16X1.6-IN)  
12. 2W-7917 [1] SHAFT-AUXILIARY DRIVE  
13. 8L-9811 [1] RING-RETAINING (EXTERNAL)  
14. 0T-0573 [1] BOLT (3/8-16X2.75-IN)  
15. 2H-3777 [1] LOCKNUT (1-5/8-18-THD)  
16. 8T-0209 [1] RACE-ROLLER BEARING  
17. 4D-3704 [1] WASHER-HARD (17X30X5-MM THK)  
18. 9S-8752 [5] NUT-FULL (3/8-16-THD)  
19. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP25020069
 

1W-5309: DRIVE GP-FAN

1W-5309 DRIVE GP-FAN -BLOWER
FOR USE WITH LOW SPEED ENGINE ARRANGEMENTS
FOR USAGE REFER TO CHART @@@@@ 4N-6973@@@@@
AN ATTACHMENT
i00352331 SEBP2502
1W5309 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-5125 [1] BRACKET AS (FAN)  
1A. 1P-9946 [1] SHAFT-FAN  
1B. 4N-0684 [1] DOWEL  
2. 5S-2106 [1] SEAL-LIP TYPE  
3. 7N-8827 [1] HUB  
4. 2D-4867 [1] FITTING-GREASE (1/8-27 PTF)(FAN DRIVE)  
5. 9L-6641 [1] V-BELT (FAN DRIVE)  
6. 9F-4446 [1] SEAL-O-RING  
7. 1H-5403 [2] BOLT (5/16-24X2-IN)  
  5S-7264 [1] WASHER-RETAINING (0.219-IN THK)(5.58MM THK)  
    -OR-
  5P-7979 [2] BOLT-LOCKING (5/16-24X2.25-IN)  
  7N-2900 [1] RETAINER (12.7MM THK)  
8. 6U-1989 [1] VALVE-RELIEF (FAN DRIVE)  
9. 1B-5174 [1] PLUG-PIPE  
10. 3L-1425 [1] BALL BEARING  
11. 6N-6598 [1] ADAPTER-FAN  
12. 7N-3947 [1] PULLEY-FAN DRIVE (2-GROOVE)  
13. 0T-0065 [6] BOLT (3/8-16X3.5-IN)  
14. 8N-5305 [1] SPACER (35.6X47.62X43.74-MM THK)  
15. 8H-9789 [1] BALL BEARING  
16. 8L-5213 [1] BOLT (3/8-16X4-IN)  
  9S-8752 [1] NUT-FULL (3/8-16-THD)  
17. 8N-4605 [1] ADAPTER-FAN BRACKET  
18. 4S-7523 [4] STUD-TAPERLOCK (1/2-13X4.5-IN)  
  1F-7960 [4] WASHER (13.5X32X6-MM THK)  
  1F-7958 [4] NUT-FULL (1/2-13-THD)  
19. 0S-1594 [2] BOLT (3/8-16X1-IN)  
20. 6N-2538 [1] BRACKET-FAN ADJUSTMENT  
21. 5S-9062 [1] SPACER (35.032X50.8X15.88-MM THK)  
 

Information:

Engine News
Be Sure To Use The Correct Inlet And Exhaust Valves In Engines Equipped With Valve Bridges That Do Not Ride On Dowels{1105,1121}
1998/03/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefixes 1WW, BFF, DLA, BFD, BKY, BLR, ECP, BGE, BKS, BLJ, B1A, BNF and 2MZ {1101, 7754}
2006/04/10
Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Commercial Engines {1100}
Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Commercial Engines {1100}
A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13
Special Instruction
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Specifications
Fuel Injection Nozzle And Adapter
3408C & 3412C INDUSTRIAL ENGINES
Valves, Valve Springs And Valve Seat Inserts
3408C & 3412C INDUSTRIAL ENGINES
Cylinder Heads
3408C & 3412C INDUSTRIAL ENGINES
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
Disassembly and Assembly
Cylinder Head
3408C & 3412C INDUSTRIAL ENGINES
Valves
3408C & 3412C INDUSTRIAL ENGINES
Valve Guides
3408C & 3412C INDUSTRIAL ENGINES
Bridge Dowels
3408C & 3412C INDUSTRIAL ENGINES
Valve Seat Inserts
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Nozzles & Adapters
3408C & 3412C INDUSTRIAL ENGINES
Service Magazine
A New Water Seal Assembly Is Now Used on All 3408 and 3412 Engines {1100, 7555}
2013/05/10

Caterpillar Parts SIS Catalog 3408C :

CYLINDER HEAD GP
4W-7005 CYLINDER HEAD GP
CYLINDER HEAD GP
141-1207 CYLINDER HEAD GP
CYLINDER HEAD AS
7W-2225 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0041 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0040 CYLINDER HEAD AS
CYLINDER HEAD AS
105-3788 CYLINDER HEAD AS
CYLINDER BLOCK GP
130-3441 CYLINDER BLOCK GP
CYLINDER BLOCK GP
130-3441 CYLINDER BLOCK GP
CYLINDER HEAD GP
7W-2224 CYLINDER HEAD GP
DAMPER & PULLEY GP
5N-5322 DAMPER & PULLEY GP
DAMPER & PULLEY GP
8N-5572 DAMPER & PULLEY GP
DAMPER & PULLEY GP
9Y-0651 DAMPER & PULLEY GP
DRIVE GP-ACCESSORY
9N-0725 DRIVE GP-ACCESSORY
DRIVE GP-AUXILIARY
4N-8505 DRIVE GP-AUXILIARY
DRIVE GP-AUXILIARY
7N-8750 DRIVE GP-AUXILIARY
DRIVE GP-AUXILIARY
7N-8881 DRIVE GP-AUXILIARY

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.