AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6N-0936 FILTER GP-ENGINE OIL Type 1 ALSO AN ATTACHMENT 3408C INDUSTRIAL ENGINE


LUBRICATION SYSTEM
FILTER GP-ENGINE OIL
BREATHER GP
GAUGE GP-OIL LEVEL (DIPSTICK)

INDUSTRIAL ENGINE 3408C INDUSTRIAL ENGINE 9ER
 3408C Industrial Engine 9ER00001-UP SEBP2502 3408C 9ER   (1996)

LUBRICATION SYSTEM

FILTER GP-ENGINE OIL
BASE GP-OIL FILTER
282-1788 BASE GP-OIL FILTER
8N-3032 FILTER AR-ENGINE OIL
FILTER GP-ENGINE OIL
4N-1409 FILTER GP-ENGINE OIL
FILTER GP-ENGINE OIL
6N-0936 FILTER GP-ENGINE OIL
FILTER GP-ENGINE OIL
6N-0936 FILTER GP-ENGINE OIL
 

#SEBP25020210
 

6N-0936: FILTER GP-ENGINE OIL

6N-0936 FILTER GP-ENGINE OIL
Type 1
ALSO AN ATTACHMENT
i00405967 SEBP2502
6N0936 FILTER GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 109-0076 [3] SEAL-O-RING  
3. 109-0078 [1] SEAL-O-RING  
4. 1R-0716 C [2] FILTER AS-ENGINE OIL (STANDARD EFFICIENCY)  
5. 0S-1594 [8] BOLT (3/8-16X1-IN)  
6. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
7. 9M-0853 [2] PLUNGER-VALVE  
8. 4N-8150 [2] SPRING  
9. 4N-0861 [1] COVER  
10. 4N-0865 [1] GASKET  
11. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 6N-1127 [2] SHIELD  
13. 4B-4161 [4] SCREW-DRIVE (NO 6X3/8-IN)  
14. 0L-1143 [1] BOLT (3/8-16X2.5-IN)  
15. 8S-9191 [1] BOLT (3/8-16X4-IN)  
16. 0S-1594 B [1] BOLT (3/8-16X1-IN)  
17. 5M-2894 B [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 6N-1298 [1] BASE AS-OIL FILTER  
18A. 2P-4304 [2] STUD-HOLLOW  
18B. 5M-6213 C [3] PLUG-PIPE (1/4-18-THD)  
18C. 8C-3446 [1] VALVE-SAMPLING (ENGINE OIL)  
18D. 3J-7354 [1] SEAL-O-RING  
18E. 8C-3445 [1] CAP-DUST (ENGINE OIL)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25020211
 

6N-0936: FILTER GP-ENGINE OIL

6N-0936 FILTER GP-ENGINE OIL
Type 2
ALSO AN ATTACHMENT
i02753999 SEBP2502
6N0936 FILTER GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-2029 C [1] BOLT (3/8-16X1.125-IN)  
2. 109-0076 [3] SEAL-O-RING  
3. 109-0078 [1] SEAL-O-RING  
4. 1R-1808 [2] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
5. 0S-1594 [7] BOLT (3/8-16X1-IN)  
6. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
7. 9M-0853 [2] PLUNGER-VALVE  
8. 4N-8150 [2] SPRING  
9. 4N-0861 [1] COVER  
10. 4N-0865 [1] GASKET  
11. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 6N-1127 [2] SHIELD  
13. 4B-4161 [4] SCREW-DRIVE (NO 6X3/8-IN)  
14. 0L-1143 [1] BOLT (3/8-16X2.5-IN)  
15. 8S-9191 [1] BOLT (3/8-16X4-IN)  
16. 0S-1594 B [1] BOLT (3/8-16X1-IN)  
17. 5M-2894 B [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 282-1788 CY [1] BASE GP-OIL FILTER  
19. 8T-1296 C [1] WASHER (10.5X19X3.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25020212
 

109-2852: FUMES DISPOSAL GP

109-2852 FUMES DISPOSAL GP
FOR USE WITH @@@@@ 7N-9950@@@@@, LH START MOTORS, RADIATOR GP
CANNOT BE USED WITH ENCLOSURES OR LH DUPLEX OIL FILTERS
AN ATTACHMENT
i00489871 SEBP2502
1092852 FUMES DISPOSAL GP Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-9058 [1] TUBE  
2. 5P-1255 E [2] HOSE (10CM EACH)  
3. 9M-2904 [6] CLAMP-HOSE  
4. 4W-9588 [1] TUBE  
5. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
6. 9X-6458 [3] WASHER-HARD (10.2X22.5X3-MM THK)  
7. 9S-8752 [3] NUT-FULL (3/8-16-THD)  
8. 3B-1915 [1] BOLT (3/8-16X1.375-IN)  
9. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 6B-0933 [1] SPACER (10.31X19.05X6.35-MM THK)  
11. 8S-2749 [1] SUPPORT  
12. 1S-0396 [2] CLIP  
13. 5N-9378 [2] HOSE (FUMES DISPOSAL)  
14. 1B-2790 B [2] BOLT (5/16-18X1.375-IN)  
15. 9M-1974 B [2] WASHER-HARD (8.8X16X2-MM THK)  
16. 0T-0573 [1] BOLT (3/8-16X2.75-IN)  
17. 9W-1991 [1] SPACER (10.7X17.1X40-MM THK)  
18. 1L-3613 [2] CLIP  
19. 1A-2029 [1] BOLT (3/8-16X1.125-IN)  
20. 3B-1915 B [2] BOLT (3/8-16X1.375-IN)  
21. 5M-2894 B [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
22. 5N-7381 [1] BRACKET  
23. 5F-4899 [1] BOLT (3/8-16X5.5-IN)  
24. 4D-1432 [1] SPACER (12.52X17.14X45.72-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP25020213
 

4W-4703: FUMES DISPOSAL GP

4W-4703 FUMES DISPOSAL GP
FOR USE WITH DRY MANIFOLD HEAT SHIELD
AN ATTACHMENT
i00379424 SEBP2502
4W4703 FUMES DISPOSAL GP Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-4895 [1] TUBE  
2. 4W-4898 [1] TUBE  
3. 0S-1594 [1] BOLT (3/8-16X1-IN)  
4. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
6. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
7. 4N-5962 [1] HOSE (FUMES DISPOSAL)  
8. 3N-6118 [1] BRACKET  
9. 0T-0065 B [1] BOLT (3/8-16X3.5-IN)  
  B   USE AS REQUIRED
 

#SEBP25020214
 

6N-5597: FUMES DISPOSAL GP

6N-5597 FUMES DISPOSAL GP
FOR USE WITH DRY OR WATER COOLED MANIFOLDS
ALSO AN ATTACHMENT
i00387739 SEBP2502
6N5597 FUMES DISPOSAL GP Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1255 E HOSE (10CM EACH)  
2. 9M-2904 [4] CLAMP-HOSE  
3. 3L-3825 [1] SPACER (0.493X0.675X1.375-IN THK)  
4. 2S-2053 [2] CLIP  
5. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 5B-9603 [1] BOLT (3/8-16X5-IN)  
7. 4W-8753 [1] TUBE  
8. 4W-9493 [1] TUBE  
9. 9S-6524 C [1] BRACKET (74.93MM)  
  3B-1915 C [1] BOLT (3/8-16X1.375-IN)  
  6B-0933 C [1] SPACER (10.31X19.05X6.35-MM THK)  
  8N-8390 C [1] BRACKET (101.8MM)  
  1A-2029 C [1] BOLT (3/8-16X1.125-IN)  
10. 2K-4973 C [1] LOCKNUT (3/8-16-THD)  
11. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
 

#SEBP25020215
 

7N-7033: FUMES DISPOSAL GP

7N-7033 FUMES DISPOSAL GP
PROVIDES 2 BREATHER TUBES ON RIGHT SIDE ON ENG WITH BOTH OUTLETS AT FRONT OF ENG
AN ATTACHMENT
i00410511 SEBP2502
7N7033 FUMES DISPOSAL GP Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1255 E [2] HOSE (9CM EACH)  
2. 9M-2904 [4] CLAMP-HOSE  
3. 2S-2053 [4] CLIP  
4. 7N-8139 [1] TUBE  
5. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
  9S-8752 [2] NUT-FULL (3/8-16-THD)  
  5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 8N-8138 [1] TUBE  
8. 7N-7498 [1] BRACKET  
  E   ORDER BY THE CENTIMETER
 

#SEBP25020216
 

144-4053: GAUGE GP-OIL LEVEL (DIPSTICK)

144-4053 GAUGE GP-OIL LEVEL (DIPSTICK) -LH REAR
AN ATTACHMENT
i00629001 SEBP2502
1444053 GAUGE GP-OIL LEVEL (DIPSTICK) Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
  9S-8752 [1] NUT-FULL (3/8-16-THD)  
2. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 7N-0862 [1] BRACKET  
4. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
5. 6B-0933 [1] SPACER (10.31X19.05X6.35-MM THK)  
6. 165-6170 [3] PLUG  
    (USE TO PLUG OPTIONAL DIPSTICK LOCATIONS)
7. 118-5068 [1] SEAL-O-RING  
8. 8N-2081 [1] GUIDE AS-OIL LEVEL GAUGE (ENGINE)  
9. 0T-0065 [1] BOLT (3/8-16X3.5-IN)  
10. 1W-2425 [1] GAUGE AS-OIL LEVEL (DIPSTICK) (ENGINE)  
 

#SEBP25020217
 

188-0297: GAUGE GP-OIL LEVEL (DIPSTICK)

188-0297 GAUGE GP-OIL LEVEL (DIPSTICK) -LH REAR
FOR USE WITH HYDRAULIC PUMP DRIVE
AN ATTACHMENT
i01268700 SEBP2502
1880297 GAUGE GP-OIL LEVEL (DIPSTICK) Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-2081 [1] GUIDE AS-OIL LEVEL GAUGE  
2. 1W-2425 [1] GAUGE AS-OIL LEVEL (DIPSTICK) (ENGINE)  
3. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 6B-0933 [1] SPACER (10.31X19.05X6.35-MM THK)  
5. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
6. 7N-0862 [1] BRACKET  
7. 118-5068 [1] SEAL-O-RING  
8. 165-6170 J [3] PLUG  
9. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
10. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
11. 6F-6405 [1] SPACER (0.438X0.75X0.375-IN THK)  
  J   USE TO PLUG OPTIONAL DIPSTICK LOCATIONS
 

#SEBP25020218
 

5N-8322: GAUGE GP-OIL LEVEL (DIPSTICK)

5N-8322 GAUGE GP-OIL LEVEL (DIPSTICK) -ENGINE
LH REAR
i00388091 SEBP2502
5N8322 GAUGE GP-OIL LEVEL (DIPSTICK) Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-8321 [1] GAUGE AS-OIL LEVEL (DIPSTICK)  
2. 1B-3057 C [1] CLIP  
3. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
  9S-8752 C [1] NUT-FULL (3/8-16-THD)  
4. 5M-2894 C [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 9L-1775 C [1] BRACKET  
6. 165-6170 [3] PLUG  
7. 5N-8323 [1] GUIDE AS-OIL LEVEL GAUGE  
8. 118-5068 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25020219
 

6N-6959: GAUGE GP-OIL LEVEL (DIPSTICK)

6N-6959 GAUGE GP-OIL LEVEL (DIPSTICK) -ENGINE
RH REAR
ALSO AN ATTACHMENT
i00388550 SEBP2502
6N6959 GAUGE GP-OIL LEVEL (DIPSTICK) Parts scheme
  For full view, you need register

Parts for your 3408C INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1608 [1] BOLT (3/8-16X3.75-IN)  
2. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
  9S-8752 [1] NUT-FULL (3/8-16-THD)  
4. 1W-2425 C [1] GAUGE AS-OIL LEVEL (DIPSTICK) (ENGINE)  
5. 7N-7504 [1] BRACKET  
6. 8N-2077 C [1] GUIDE AS-OIL LEVEL GAUGE  
7. 165-6170 [3] PLUG  
    (USE TO PLUG OPTIONAL DIPSTICK LOCATIONS)
8. 118-5068 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
New High Efficiency Oil Filters are Now Available {1308}
2004/03/01
Service Letter-NACD
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Oil Filters And Bypass Valves
3408C & 3412C INDUSTRIAL ENGINES
Service Letter-China
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Oil Bypass Valve
3408C & 3412C INDUSTRIAL ENGINES
Oil Filter Base
3408C & 3412C INDUSTRIAL ENGINES
Oil Cooler
3408C & 3412C INDUSTRIAL ENGINES

Caterpillar Parts SIS Catalog 3408C :

FILTER GP-ENGINE OIL
4N-1409 FILTER GP-ENGINE OIL
8N-3032 FILTER AR-ENGINE OIL
FILLER GP-ENGINE OIL
2W-6537 FILLER GP-ENGINE OIL
FASTENER GP-OIL PUMP MOUNTING
4N-2481 FASTENER GP-OIL PUMP MOUNTING
BREATHER GP
2N-8220 BREATHER GP
BASE GP-OIL FILTER
282-1788 BASE GP-OIL FILTER
VALVE MECHANISM GP
4N-4298 VALVE MECHANISM GP
VALVE MECHANISM GP
4N-4298 VALVE MECHANISM GP
FILTER GP-ENGINE OIL
6N-0936 FILTER GP-ENGINE OIL
FUMES DISPOSAL GP
109-2852 FUMES DISPOSAL GP
FUMES DISPOSAL GP
4W-4703 FUMES DISPOSAL GP
FUMES DISPOSAL GP
6N-5597 FUMES DISPOSAL GP
FUMES DISPOSAL GP
7N-7033 FUMES DISPOSAL GP
GAUGE GP-OIL LEVEL (DIPSTICK)
144-4053 GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
188-0297 GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
5N-8322 GAUGE GP-OIL LEVEL (DIPSTICK)

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.