AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3412C Industrial Engine 8AR00001-UP BASIC ENGINE Caterpillar SIS



INDUSTRIAL ENGINE 3412C INDUSTRIAL ENGINE 8AR
 3412C Industrial Engine 8AR00001-UP SEBP2505 3412C 8AR   (1995)

Parts group 3412C:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
AIR COMPRESSOR GP
122-8966 AIR COMPRESSOR GP
122-8966 AIR COMPRESSOR GP
PART OF 7N-2850 AIR COMPRESSOR GP
FIELD REPLACEMENT ORDER @@@@@126-6110@@@@@
AN ATTACHMENT
AIR COMPRESSOR GP
126-6110 AIR COMPRESSOR GP
126-6110 AIR COMPRESSOR GP
FIELD REPLACEMENT FOR @@@@@122-8966@@@@@
FIELD INSTALLATION
AIR COMPRESSOR GP
6N-3611 AIR COMPRESSOR GP
6N-3611 AIR COMPRESSOR GP
PART OF 7N-2850 AIR COMPRESSOR GP
AN ATTACHMENT
AIR COMPRESSOR GP
7N-2850 AIR COMPRESSOR GP
7N-2850 AIR COMPRESSOR GP
12 CFM BELT DRIVEN. MOUNTS ON LH FRONT
Type 1
FOR USE WITH LINES GP-COMPRESSOR,REAR MOUNTED TURBO ONLY
CANNOT BE USED WITH LH FRONT AUX DRIVE, AUX WATER PUMP, WATER COOLED MANIFOLD OR EXPANSION TANK
AN ATTACHMENT
AIR COMPRESSOR GP
7N-2850 AIR COMPRESSOR GP
7N-2850 AIR COMPRESSOR GP
12 CFM BELT DRIVEN. MOUNTS ON LH FRONT
Type 2
FOR USE WITH LINES GP-COMPRESSOR,REAR MOUNTED TURBO ONLY
CANNOT BE USED WITH LH FRONT AUX DRIVE, AUX WATER PUMP, WATER COOLED MANIFOLD OR EXPANSION TANK
AN ATTACHMENT
201-1302 GOVERNOR GP-AIR COMPRESSOR
201-1302 GOVERNOR GP-AIR COMPRESSOR
AN ATTACHMENT
GOVERNOR GP-AIR COMPRESSOR
4N-9680 GOVERNOR GP-AIR COMPRESSOR
4N-9680 GOVERNOR GP-AIR COMPRESSOR
PART OF 7E-4832 GOVERNOR GP-AIR COMPRESSOR
AN ATTACHMENT
GOVERNOR GP-AIR COMPRESSOR
7E-4832 GOVERNOR GP-AIR COMPRESSOR
7E-4832 GOVERNOR GP-AIR COMPRESSOR
ACTUATION PRESSURE 620 KPA (90 PSI). DEACTUATION PRESSURE 827 KPA (120 PSI)
FOR USE WITH AIR COMPRESSOR
AN ATTACHMENT
LINES GP-AIR COMPRESSOR
6N-6154 LINES GP-AIR COMPRESSOR
6N-6154 LINES GP-AIR COMPRESSOR
NON-AFTERCOOLED
AN ATTACHMENT
LINES GP-AIR COMPRESSOR
6N-6155 LINES GP-AIR COMPRESSOR
6N-6155 LINES GP-AIR COMPRESSOR
FOR USE WITH 12 CFM AIR COMPRESSOR (BELT DRIVEN)
AN ATTACHMENT
CAMSHAFT GP
CAMSHAFT GP
4N-0965 CAMSHAFT GP
4N-0965 CAMSHAFT GP
ALSO AN ATTACHMENT
CLUTCH GP
CLUTCH GP
2W-4912 CLUTCH GP
2W-4912 CLUTCH GP
PART OF 2W-4913 POWER TAKE-OFF GP
AN ATTACHMENT
CLUTCH GP
4P-0410 CLUTCH GP
4P-0410 CLUTCH GP
PART OF 4P-3127 POWER TAKE-OFF GP
AN ATTACHMENT
CLUTCH GP
4P-3068 CLUTCH GP
4P-3068 CLUTCH GP
PART OF 4P-3069 POWER TAKE-OFF GP
AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT AS
384-9906 CRANKSHAFT AS
384-9906 CRANKSHAFT AS
S/N 8AR805-UP
PART OF 4N-0922 CRANKSHAFT GP
ALSO AN ATTACHMENT
CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
S/N 8AR1-804
CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
S/N 8AR805-UP
CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
S/N 8AR805-UP
ALSO AN ATTACHMENT
243-6718 KIT-CRANKSHAFT BEARING
243-6718 KIT-CRANKSHAFT BEARING
FIELD INSTALLATION
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT -REAR
S/N 8AR805-UP
PART OF 4N-0922 CRANKSHAFT GP
FOR USE WITH CCW ROTATION
ALSO AN ATTACHMENT
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT -FRONT
S/N 8AR805-UP
PART OF 4N-0922 CRANKSHAFT GP
FOR USE WITH CW ROTATION
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
4N-6866 COVER GP-CYLINDER BLOCK
4N-6866 COVER GP-CYLINDER BLOCK
ALSO AN ATTACHMENT
CYLINDER BLOCK AS
117-9512 CYLINDER BLOCK AS
117-9512 CYLINDER BLOCK AS
FOR MODELS E429 AND E474 ONLY USE 12-168-4538 JET AS-PISTON COOLING
PART OF 103-0697 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@126-1373@@@@@, 12-111-8606 BOLT, 12- 7W-4990 JET AS-PISTON COOLING
ALSO AN ATTACHMENT
CYLINDER BLOCK AS
126-1372 CYLINDER BLOCK AS
126-1372 CYLINDER BLOCK AS
PART OF 126-1375 CYLINDER BLOCK AS, 126-1373 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
CYLINDER BLOCK AS
126-1375 CYLINDER BLOCK AS
126-1375 CYLINDER BLOCK AS
PART OF 103-0697 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@126-1373@@@@@, 12- 7W-4990 TUBE AS-OIL JET, 12-111-8606 BOLT-OIL JET
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
103-0697 CYLINDER BLOCK GP
103-0697 CYLINDER BLOCK GP
Type 1
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
103-0697 CYLINDER BLOCK GP
103-0697 CYLINDER BLOCK GP
Type 2
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
126-1373 CYLINDER BLOCK GP
126-1373 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@117-9512@@@@@, @@@@@126-1375@@@@@
PLUG GP-CYLINDER BLOCK
127-3512 PLUG GP-CYLINDER BLOCK
127-3512 PLUG GP-CYLINDER BLOCK
S/N 8AR1193-UP
PLUG GP-CYLINDER BLOCK
209-6741 PLUG GP-CYLINDER BLOCK
209-6741 PLUG GP-CYLINDER BLOCK
S/N 8AR1188-UP
ALSO AN ATTACHMENT
PLUG GP-CYLINDER BLOCK
209-6742 PLUG GP-CYLINDER BLOCK
209-6742 PLUG GP-CYLINDER BLOCK
S/N 8AR1193-UP
CYLINDER HEAD GP
CYLINDER HEAD AS
143-0046 CYLINDER HEAD AS
143-0046 CYLINDER HEAD AS
PART OF 143-0047, 7W-2243 CYLINDER HEAD AS
FIELD REPLACEMENT ORDER @@@@@143-0047@@@@@
ALSO AN ATTACHMENT
CYLINDER HEAD AS
143-0047 CYLINDER HEAD AS
143-0047 CYLINDER HEAD AS
S/N 8AR539-UP
PART OF 141-3228 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@143-0046@@@@@
ALSO AN ATTACHMENT
CYLINDER HEAD AS
7W-2243 CYLINDER HEAD AS
7W-2243 CYLINDER HEAD AS
S/N 8AR1-538
PART OF 7W-2242 CYLINDER HEAD GP
CYLINDER HEAD GP
141-3228 CYLINDER HEAD GP
141-3228 CYLINDER HEAD GP
S/N 8AR539-UP
PART OF 4W-7007 CYLINDER HEAD GP
ALSO AN ATTACHMENT
CYLINDER HEAD GP
4W-7007 CYLINDER HEAD GP
4W-7007 CYLINDER HEAD GP
S/N 8AR1-538
CYLINDER HEAD GP
4W-7007 CYLINDER HEAD GP
4W-7007 CYLINDER HEAD GP
S/N 8AR539-UP
ALSO AN ATTACHMENT
CYLINDER HEAD GP
7W-2242 CYLINDER HEAD GP
7W-2242 CYLINDER HEAD GP
S/N 8AR1-538
PART OF 4W-7007 CYLINDER HEAD GP
DAMPER GP
DAMPER & PULLEY GP
174-4346 DAMPER & PULLEY GP
174-4346 DAMPER & PULLEY GP
SINGLE GROOVE ALTERNATOR PULLEY AND DAMPER WITH 81-MM LENGTH STUDS, DOES NOT INCLUDE FAN DRIVE PULLEY
AN ATTACHMENT
DAMPER & PULLEY GP
5N-5322 DAMPER & PULLEY GP
5N-5322 DAMPER & PULLEY GP
CANNOT BE USED WITH FRONT CRANKSHAFT MOUNTED ATTACHMENT
AN ATTACHMENT
DAMPER & PULLEY GP
8N-5572 DAMPER & PULLEY GP
8N-5572 DAMPER & PULLEY GP
FOR USE WITH 1000 HP CSFS MARINE ENGINES
ALSO AN ATTACHMENT
GUARD GP-DAMPER
5R-4709 GUARD GP-DAMPER
5R-4709 GUARD GP-DAMPER
CANNOT BE USED WITH SURGE TANK, ALTERNATOR, REMOTE MOUNTED RADIATOR OR MOBILE EQUIPMENT FRONT SUPPORT
AN ATTACHMENT
GUARD GP-DAMPER
8N-4812 GUARD GP-DAMPER
8N-4812 GUARD GP-DAMPER
S/N 8AR1-1301
CANNOT BE USED WITH RADIATOR OR ALTERNATOR
AN ATTACHMENT
GUARD GP-DAMPER
8N-4812 GUARD GP-DAMPER
8N-4812 GUARD GP-DAMPER
S/N 8AR1302-UP
CANNOT BE USED WITH RADIATOR OR ALTERNATOR
AN ATTACHMENT
DRIVE GP-AUXILIARY
DRIVE GP-AUXILIARY
7N-8750 DRIVE GP-AUXILIARY
7N-8750 DRIVE GP-AUXILIARY
3 GROOVE PULLEY
CANNOT BE USED WITH HEAT EXCHANGER COOLED ENGINE
AN ATTACHMENT
DRIVE GP-AUXILIARY
7N-8881 DRIVE GP-AUXILIARY
7N-8881 DRIVE GP-AUXILIARY
2 GROOVE PULLEY
CANNOT BE USED WITH HEAT EXCHANGER COOLED ENGINE
AN ATTACHMENT
DRIVE GP-FAN
DRIVE GP-FAN
114-3131 DRIVE GP-FAN
114-3131 DRIVE GP-FAN
FOR USE WITH E SIZE RADIATOR
AN ATTACHMENT
DRIVE GP-FAN
7N-8831 DRIVE GP-FAN
7N-8831 DRIVE GP-FAN -BLOWER
AN ATTACHMENT
DRIVE GP-FAN
7N-8832 DRIVE GP-FAN
7N-8832 DRIVE GP-FAN -BLOWER
AN ATTACHMENT
DRIVE GP-FAN
7N-8835 DRIVE GP-FAN
7N-8835 DRIVE GP-FAN -BLOWER
AN ATTACHMENT
DRIVE GP-FAN
7N-8841 DRIVE GP-FAN
7N-8841 DRIVE GP-FAN -BLOWER
AN ATTACHMENT
DRIVE GP-FAN
7N-8842 DRIVE GP-FAN
7N-8842 DRIVE GP-FAN -BLOWER
AN ATTACHMENT
DRIVE GP-FAN
7N-8843 DRIVE GP-FAN
7N-8843 DRIVE GP-FAN -BLOWER
AN ATTACHMENT
DRIVE GP-FAN
7N-8844 DRIVE GP-FAN
7N-8844 DRIVE GP-FAN -BLOWER
AN ATTACHMENT
DRIVE GP-FAN
7N-8847 DRIVE GP-FAN
7N-8847 DRIVE GP-FAN -BLOWER
AN ATTACHMENT
DRIVE GP-FAN
7N-8849 DRIVE GP-FAN
7N-8849 DRIVE GP-FAN -BLOWER
AN ATTACHMENT
DRIVE GP-FAN
7N-8966 DRIVE GP-FAN
7N-8966 DRIVE GP-FAN -SUCTION
AN ATTACHMENT
DRIVE GP-FAN
7N-8967 DRIVE GP-FAN
7N-8967 DRIVE GP-FAN -SUCTION
AN ATTACHMENT
DRIVE GP-FAN
7N-8971 DRIVE GP-FAN
7N-8971 DRIVE GP-FAN -SUCTION
AN ATTACHMENT
DRIVE GP-FAN
7N-8973 DRIVE GP-FAN
7N-8973 DRIVE GP-FAN -SUCTION
AN ATTACHMENT
DRIVE GP-FAN
7N-8979 DRIVE GP-FAN
7N-8979 DRIVE GP-FAN -SUCTION
AN ATTACHMENT
DRIVE GP-FAN
7N-8980 DRIVE GP-FAN
7N-8980 DRIVE GP-FAN -SUCTION
AN ATTACHMENT
DRIVE GP-FAN
7N-8983 DRIVE GP-FAN
7N-8983 DRIVE GP-FAN
MAX ENGINE RPM 1800 LOW FAN SPEED OR 2100 RPM STANDARD FAN SPEED
FOR USE WITH @@@@@ 4N-6513@@@@@
AN ATTACHMENT
DRIVE GP-FAN
8N-6399 DRIVE GP-FAN
8N-6399 DRIVE GP-FAN
0.485-DRIVE RATIO
FOR USE WITH MOBILE EQUIPMENT
AN ATTACHMENT
DRIVE GP-FAN
8N-6400 DRIVE GP-FAN
8N-6400 DRIVE GP-FAN
0.571-DRIVE RATIO
FOR USE WITH MOBILE EQUIPMENT
AN ATTACHMENT
DRIVE GP-FAN
8N-6401 DRIVE GP-FAN
8N-6401 DRIVE GP-FAN
0.681-DRIVE RATIO
FOR USE WITH MOBILE EQUIPMENT
AN ATTACHMENT
DRIVE GP-FAN
8N-6402 DRIVE GP-FAN
8N-6402 DRIVE GP-FAN
0.800-DRIVE RATIO
FOR USE WITH MOBILE EQUIPMENT
AN ATTACHMENT
DRIVE GP-PUMP
DRIVE GP-PUMP
136-9498 DRIVE GP-PUMP
136-9498 DRIVE GP-PUMP
FOR USE ON THE LH SIDE OF SAE NO. 1 FLYWHEEL HOUSING, PROVIDES DRIVE FOR SAE NO. B HYDRAULIC PUMP
FOR USE WITH CUSTOMER SUPPLIED A SIZE PUMP WITH SAE NO. 2 BOLT MOUNTING FLANGE
AN ATTACHMENT
DRIVE GP-PUMP
6I-1774 DRIVE GP-PUMP
6I-1774 DRIVE GP-PUMP
PROVIDES AN AUXILIARY DRIVE FOR A HYDRAULIC PUMP MOUNTED ON THE RH REAR OF THE SAE NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT
DRIVE GP-PUMP
7N-2642 DRIVE GP-PUMP
7N-2642 DRIVE GP-PUMP
PROVIDES AN AUXILIARY DRIVE FOR AN SAE "B" HYDRAULIC PUMP WITH 2 BOLT MOUNTING FLANGE
AN ATTACHMENT
DRIVE GP-PUMP
7N-2645 DRIVE GP-PUMP
7N-2645 DRIVE GP-PUMP
LH AND RH REAR, MOUNTED ON LH REAR OF SAE NO. 1 FLYWHEEL HOUSING
FOR USE WITH CUSTOMER SUPPLIED "A" SIZE PUMP WITH SAE NO. 2 BOLT MOUNTING FLANGE
AN ATTACHMENT
FLYWHEEL GP
ADAPTER GP-FLYWHEEL
6N-9829 ADAPTER GP-FLYWHEEL
6N-9829 ADAPTER GP-FLYWHEEL
CANNOT BE USED WITH BRAKESAVER ENGINE
AN ATTACHMENT
ADAPTER GP-FLYWHEEL
7N-6291 ADAPTER GP-FLYWHEEL
7N-6291 ADAPTER GP-FLYWHEEL
FOR USE WITH A TRANSMISSION THAT ADAPTS TO AN SAE NO.0 FLYWHEEL HOUSING
AN ATTACHMENT
FLYWHEEL GP
126-8269 FLYWHEEL GP
126-8269 FLYWHEEL GP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING, TORQUE CONVERTER
AN ATTACHMENT
FLYWHEEL GP
3N-8804 FLYWHEEL GP
3N-8804 FLYWHEEL GP
FOR USE WITH 11-INCH CLUTCH
AN ATTACHMENT
FLYWHEEL GP
4P-3070 FLYWHEEL GP
4P-3070 FLYWHEEL GP
FOR USE WITH @@@@@ 4P-3127@@@@@
AN ATTACHMENT
FLYWHEEL GP
6N-1299 FLYWHEEL GP
6N-1299 FLYWHEEL GP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING AND BRAKESAVER ENGINES
AN ATTACHMENT
FLYWHEEL GP
7N-3060 FLYWHEEL GP
7N-3060 FLYWHEEL GP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
ALSO AN ATTACHMENT
FLYWHEEL GP
7N-3079 FLYWHEEL GP
7N-3079 FLYWHEEL GP
FOR USE WITH SAE NO. 0 FLYWHEEL HOUSING
GEAR GP-REAR
4N-3825 GEAR GP-REAR
4N-3825 GEAR GP-REAR
ALSO AN ATTACHMENT
GEAR GP
GEAR GP-FRONT
4N-6341 GEAR GP-FRONT
4N-6341 GEAR GP-FRONT -TIMING
ALSO AN ATTACHMENT
GEAR GP-REAR
4N-3825 GEAR GP-REAR
4N-3825 GEAR GP-REAR
ALSO AN ATTACHMENT
HOUSING GP-FRONT
4N-5226 HOUSING GP-FRONT
4N-5226 HOUSING GP-FRONT
TIMING GEAR
ALSO AN ATTACHMENT
GUARD GP-BELT
GUARD GP-BELT
1W-0658 GUARD GP-BELT
1W-0658 GUARD GP-BELT
FOR USE WITH LOW RPM ENG WITH SURGE TANK AND ALTERNATOR AND WITHOUT RADIATOR
AN ATTACHMENT
GUARD GP-BELT
7E-9052 GUARD GP-BELT
7E-9052 GUARD GP-BELT
FOR USE WITH WIDE FRONT ENGINE SUPPORT OR 10 INCH RAILS
AN ATTACHMENT
GUARD GP-BELT
7E-9053 GUARD GP-BELT
7E-9053 GUARD GP-BELT
CANNOT BE USED WITH AIR COMPRESSOR
AN ATTACHMENT
GUARD GP-BELT
7E-9054 GUARD GP-BELT
7E-9054 GUARD GP-BELT
CAN BE USED WITH OR WITHOUT RADIATOR
FOR USE WITH LH BELT DRIVEN ALTERNATOR
CANNOT BE USED WITH SWITCHGEAR CONVERSION
AN ATTACHMENT
GUARD GP-BELT
8N-4813 GUARD GP-BELT
8N-4813 GUARD GP-BELT
PROVIDES GUARD FOR ALTERNATOR PULLEY AND BELT WHEN DRIVEN FROM FRONT CRANKSHAFT PULLEY
FOR USE WITH ALTERNATOR WHEN A RADIATOR IS NOT USED
CANNOT BE USED WITH EXPANSION TANK
AN ATTACHMENT
GUARD GP-BELT
8N-4814 GUARD GP-BELT
8N-4814 GUARD GP-BELT
Type 1
FOR USE WITH ENGINES RATED AT 1500 RPM OR 1800 RPM, EXPANSION TANK, ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
8N-4814 GUARD GP-BELT
8N-4814 GUARD GP-BELT
Type 2
FOR USE WITH ENGINES RATED AT 1500 RPM OR 1800 RPM, EXPANSION TANK, ALTERNATOR
AN ATTACHMENT
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
4N-1902 COVER GP-FLYWHEEL HOUSING
4N-1902 COVER GP-FLYWHEEL HOUSING
S/N 8AR1-3362
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
ALSO AN ATTACHMENT
COVER GP-FLYWHEEL HOUSING
4N-1902 COVER GP-FLYWHEEL HOUSING
4N-1902 COVER GP-FLYWHEEL HOUSING
S/N 8AR3363-UP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
ALSO AN ATTACHMENT
COVER GP-FLYWHEEL HOUSING
4N-7798 COVER GP-FLYWHEEL HOUSING
4N-7798 COVER GP-FLYWHEEL HOUSING
REAR STRUCTURE
COVER GP-FLYWHEEL HOUSING
6N-1897 COVER GP-FLYWHEEL HOUSING
6N-1897 COVER GP-FLYWHEEL HOUSING
HOUSING GP-FLYWHEEL
2W-3204 HOUSING GP-FLYWHEEL
2W-3204 HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
4N-1890 HOUSING GP-FLYWHEEL
4N-1890 HOUSING GP-FLYWHEEL
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING AND SINGLE REAR MOUNT TURBO
ALSO AN ATTACHMENT
HOUSING GP-FLYWHEEL
4N-2931 HOUSING GP-FLYWHEEL
4N-2931 HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
4N-6798 COVER GP-FRONT HOUSING
4N-6798 COVER GP-FRONT HOUSING
ALSO AN ATTACHMENT
GEAR GP-FRONT
4N-6341 GEAR GP-FRONT
4N-6341 GEAR GP-FRONT -TIMING
ALSO AN ATTACHMENT
HOUSING GP-FRONT
4N-5226 HOUSING GP-FRONT
4N-5226 HOUSING GP-FRONT
TIMING GEAR
ALSO AN ATTACHMENT
LIFTING GP-ENGINE
LIFTING GP-ENGINE
7N-1750 LIFTING GP-ENGINE
7N-1750 LIFTING GP-ENGINE
ALSO AN ATTACHMENT
LIFTING GP-ENGINE
7N-7767 LIFTING GP-ENGINE
7N-7767 LIFTING GP-ENGINE
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR
130-5362 MOUNTING GP-ALTERNATOR
130-5362 MOUNTING GP-ALTERNATOR
REQUIRES 381 MM DIA ALTERNATOR DRIVE PULLEY ON CRANKSHAFT
CANNOT BE USED WITH LH FRONT MOUNTED AIR COMPRESSOR
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
1W-1340 MOUNTING GP-ALTERNATOR
1W-1340 MOUNTING GP-ALTERNATOR
Type 1
FOR USE WITH WATERCOOLED MANIFOLDS
CANNOT BE USED WITH FRONT POWER TAKE-OFF
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
1W-1340 MOUNTING GP-ALTERNATOR
1W-1340 MOUNTING GP-ALTERNATOR
Type 2
FOR USE WITH WATERCOOLED MANIFOLDS
CANNOT BE USED WITH FRONT POWER TAKE-OFF
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
1W-1851 MOUNTING GP-ALTERNATOR
1W-1851 MOUNTING GP-ALTERNATOR
FOR USE WITH LOW RPM ENGINES
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
4P-4061 MOUNTING GP-ALTERNATOR
4P-4061 MOUNTING GP-ALTERNATOR
FOR USE WITH @@@@@ 4N-3986@@@@@, @@@@@ 5N-5692@@@@@, @@@@@ 6N-9294@@@@@, ALTERNATOR GUARD
CANNOT BE USED WITH SERIES TURBO ENGINES
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
4P-4063 MOUNTING GP-ALTERNATOR
4P-4063 MOUNTING GP-ALTERNATOR
FOR USE WITH @@@@@ 6T-1395@@@@@, ALTERNATOR GUARD
CANNOT BE USED WITH FRONT PTO OR LH DUPLEX OIL FILTERS, SERIES TURBO ENGINES
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
4W-5577 MOUNTING GP-ALTERNATOR
4W-5577 MOUNTING GP-ALTERNATOR
FOR USE WITH @@@@@ 6T-1395@@@@@, FRONT AIR COMPRESSOR
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
4W-5578 MOUNTING GP-ALTERNATOR
4W-5578 MOUNTING GP-ALTERNATOR
FOR USE WITH @@@@@ 6T-1395@@@@@
CANNOT BE USED WITH FRONT POWER TAKEOFF, LH DUPLEX OIL FILTER
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
5N-1686 MOUNTING GP-ALTERNATOR
5N-1686 MOUNTING GP-ALTERNATOR
CANNOT BE USED WITH FRONT MOUNTED AIR COMPRESSOR OR HEUI ENGINE
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
6N-2926 MOUNTING GP-ALTERNATOR
6N-2926 MOUNTING GP-ALTERNATOR
CANNOT BE USED WITH FRONT POWER TAKE OFF
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
6N-8191 MOUNTING GP-ALTERNATOR
6N-8191 MOUNTING GP-ALTERNATOR
FOR USE WITH @@@@@ 4N-3986@@@@@, @@@@@ 6N-9294@@@@@, @@@@@ 5N-5692@@@@@, AIR COMPRESSOR, FRONT AIR COMPRESSORS
AN ATTACHMENT
MOUNTING GP-ENGINE
SUPPORT AS-FRONT
4W-0664 SUPPORT AS-FRONT
4W-0664 SUPPORT AS-FRONT
FOR USE WITH "A" OR "B" RADIATOR
AN ATTACHMENT
SUPPORT GP-ENGINE
2W-6900 SUPPORT GP-ENGINE
2W-6900 SUPPORT GP-ENGINE -REAR
AN ATTACHMENT
SUPPORT GP-ENGINE
4N-4286 SUPPORT GP-ENGINE
4N-4286 SUPPORT GP-ENGINE -REAR
FOR USE WITH SAE NO. 0 OR NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT
SUPPORT GP-ENGINE
6N-6499 SUPPORT GP-ENGINE
6N-6499 SUPPORT GP-ENGINE -FRONT
FOR USE WITH MOBILE EQUIPMENT APPLICATIONS
AN ATTACHMENT
SUPPORT GP-ENGINE
7N-9078 SUPPORT GP-ENGINE
7N-9078 SUPPORT GP-ENGINE -FRONT, WIDE
ALSO AN ATTACHMENT
PAN GP-OIL
ADAPTER GP-OIL PAN DRAIN
9Y-5438 ADAPTER GP-OIL PAN DRAIN
9Y-5438 ADAPTER GP-OIL PAN DRAIN
FOR USE WITH OIL PANS WITH TWO BOLT FLANGE
AN ATTACHMENT
COVER GP-OIL PAN
6N-1400 COVER GP-OIL PAN
6N-1400 COVER GP-OIL PAN
ALSO AN ATTACHMENT
PAN GP-OIL
4N-2647 PAN GP-OIL
4N-2647 PAN GP-OIL -ENGINE
ALSO AN ATTACHMENT
PISTON & ROD GP
PISTON & ROD GP
128-8592 PISTON & ROD GP
128-8592 PISTON & ROD GP
14.7:1 RATIO
ALSO AN ATTACHMENT
POWER TAKE-OFF GP
POWER TAKE-OFF GP
2W-4913 POWER TAKE-OFF GP
2W-4913 POWER TAKE-OFF GP
CLUTCH, INTERMEDIATE DUTY INCLUDES REAR SUPPORT FOR INLINE OR SIDE LOADS, REQUIRES SAE NO. 0 FLYWHEEL HOUSING
AN ATTACHMENT
POWER TAKE-OFF GP
4P-3069 POWER TAKE-OFF GP
4P-3069 POWER TAKE-OFF GP
CANNOT BE USED WITH SIDE LOADED APPLICATIONS
AN ATTACHMENT
POWER TAKE-OFF GP
4P-3127 POWER TAKE-OFF GP
4P-3127 POWER TAKE-OFF GP
REAR CLUTCH SUPPORT IS REQUIRED FOR SIDE LOAD APPLICATIONS
FOR USE WITH @@@@@ 4P-3070@@@@@
AN ATTACHMENT
SUPPORT GP-POWER TAKE-OFF
5N-1933 SUPPORT GP-POWER TAKE-OFF
5N-1933 SUPPORT GP-POWER TAKE-OFF
CLUTCH
CANNOT BE USED WITH FUEL TANK BASE
AN ATTACHMENT
PULLEY GP
DAMPER & PULLEY GP
174-4346 DAMPER & PULLEY GP
174-4346 DAMPER & PULLEY GP
SINGLE GROOVE ALTERNATOR PULLEY AND DAMPER WITH 81-MM LENGTH STUDS, DOES NOT INCLUDE FAN DRIVE PULLEY
AN ATTACHMENT
DAMPER & PULLEY GP
5N-5322 DAMPER & PULLEY GP
5N-5322 DAMPER & PULLEY GP
CANNOT BE USED WITH FRONT CRANKSHAFT MOUNTED ATTACHMENT
AN ATTACHMENT
DAMPER & PULLEY GP
8N-5572 DAMPER & PULLEY GP
8N-5572 DAMPER & PULLEY GP
FOR USE WITH 1000 HP CSFS MARINE ENGINES
ALSO AN ATTACHMENT
SHAFT GP-STUB
GUARD GP-STUB SHAFT
3N-7779 GUARD GP-STUB SHAFT
3N-7779 GUARD GP-STUB SHAFT
FOR USE WITH SAE NO. 0 FLYWHEEL HOUSING
AN ATTACHMENT
SHAFT GP-STUB
5N-2010 SHAFT GP-STUB
5N-2010 SHAFT GP-STUB
CANNOT BE USED WITH REAR ENCLOSED CLUTCH
AN ATTACHMENT
SERPENTINE/V-BELTS
GUARD GP-BELT
1W-0658 GUARD GP-BELT
1W-0658 GUARD GP-BELT
FOR USE WITH LOW RPM ENG WITH SURGE TANK AND ALTERNATOR AND WITHOUT RADIATOR
AN ATTACHMENT
GUARD GP-BELT
7E-9052 GUARD GP-BELT
7E-9052 GUARD GP-BELT
FOR USE WITH WIDE FRONT ENGINE SUPPORT OR 10 INCH RAILS
AN ATTACHMENT
GUARD GP-BELT
7E-9053 GUARD GP-BELT
7E-9053 GUARD GP-BELT
CANNOT BE USED WITH AIR COMPRESSOR
AN ATTACHMENT
GUARD GP-BELT
7E-9054 GUARD GP-BELT
7E-9054 GUARD GP-BELT
CAN BE USED WITH OR WITHOUT RADIATOR
FOR USE WITH LH BELT DRIVEN ALTERNATOR
CANNOT BE USED WITH SWITCHGEAR CONVERSION
AN ATTACHMENT
GUARD GP-BELT
8N-4813 GUARD GP-BELT
8N-4813 GUARD GP-BELT
PROVIDES GUARD FOR ALTERNATOR PULLEY AND BELT WHEN DRIVEN FROM FRONT CRANKSHAFT PULLEY
FOR USE WITH ALTERNATOR WHEN A RADIATOR IS NOT USED
CANNOT BE USED WITH EXPANSION TANK
AN ATTACHMENT
GUARD GP-BELT
8N-4814 GUARD GP-BELT
8N-4814 GUARD GP-BELT
Type 1
FOR USE WITH ENGINES RATED AT 1500 RPM OR 1800 RPM, EXPANSION TANK, ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
8N-4814 GUARD GP-BELT
8N-4814 GUARD GP-BELT
Type 2
FOR USE WITH ENGINES RATED AT 1500 RPM OR 1800 RPM, EXPANSION TANK, ALTERNATOR
AN ATTACHMENT
118-2018 V-BELT SET
118-2018 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
2108-MM (83-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
180-9571 V-BELT SET
180-9571 V-BELT SET -INCLUDES 4-BELTS, FAN DRIVE
1803-MM (71-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
1W-0422 V-BELT SET
1W-0422 V-BELT SET -INCLUDES 4-BELTS, FAN DRIVE
1981-MM (78-INCH)LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
2N-8612 V-BELT SET
2N-8612 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
1359-MM(53.5-INCH)LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
3N-8848 V-BELT SET
3N-8848 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
1803-MM (71-INCH)LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
3R-9090 V-BELT SET
3R-9090 V-BELT SET -INCLUDES 4-BELTS, FAN DRIVE
1905 MM (75 INCH)LONG
FOR USE WITH FAN DRIVE & 508 MM (20 INCH) CENTER DISTANCE
AN ATTACHMENT
4N-6302 V-BELT SET
4N-6302 V-BELT SET
1918-MM (75.5-INCH)LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
4N-6423 V-BELT SET
4N-6423 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
1639-MM(64.5-INCH)LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
4N-8198 V-BELT SET
4N-8198 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
2134-MM (84-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
4N-8278 V-BELT SET
4N-8278 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
1854-MM (73-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
4P-8087 V-BELT SET
4P-8087 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
1956-MM (77-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
4W-8510 V-BELT SET
4W-8510 V-BELT SET -INCLUDES 4-BELTS, FAN DRIVE
2032-MM (80-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
4W-9051 V-BELT SET
4W-9051 V-BELT SET -INCLUDES 4-BELTS, FAN DRIVE
2007-MM (79-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
5N-0414 V-BELT SET
5N-0414 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
1562-MM (61.5-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
5N-2346 V-BELT SET
5N-2346 V-BELT SET -INCLUDES 4-BELTS, FAN DRIVE
1816-MM (71.5-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
5N-4751 V-BELT SET
5N-4751 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
1829-MM (72-IN) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
6N-5337 V-BELT SET
6N-5337 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
2057-MM (81-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
6N-6653 V-BELT SET
6N-6653 V-BELT SET -INCLUDES 4-BELTS, FAN DRIVE
1613-MM (63.5 INCH-LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
6N-6656 V-BELT SET
6N-6656 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
1613-MM (63.0-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
PART OF 7N-8980 DRIVE GP-FAN
AN ATTACHMENT
6N-6798 V-BELT SET
6N-6798 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
1549-MM (61-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
6N-7053 V-BELT SET
6N-7053 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
1981-MM (78-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
6N-9158 V-BELT SET
6N-9158 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
1740-MM (68.5-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
PART OF 7N-8983 DRIVE GP-FAN
AN ATTACHMENT
6N-9159 V-BELT SET
6N-9159 V-BELT SET -INCLUDES 4-BELTS, FAN DRIVE
1549-MM (61-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
7C-2500 V-BELT SET
7C-2500 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
2032-MM (80-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
7E-7646 V-BELT SET
7E-7646 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
1752-MM (69-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
7L-7020 V-BELT SET
7L-7020 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
1410-MM (55.5-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
7N-4148 V-BELT SET
7N-4148 V-BELT SET -INCLUDES 4-BELTS, FAN DRIVE
2159-MM (85-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
7N-7055 V-BELT SET
7N-7055 V-BELT SET -INCLUDES 4-BELTS, FAN DRIVE
2083-MM (82-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
7W-3222 V-BELT SET
7W-3222 V-BELT SET -INCLUDES 4-BELTS, FAN DRIVE
1854-MM (73-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
8L-5137 V-BELT SET
8L-5137 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
1372-MM (54-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
8N-6696 V-BELT SET
8N-6696 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
2210-MM (87-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
8N-6708 V-BELT SET
8N-6708 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
2261-MM (89-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
8N-6710 V-BELT SET
8N-6710 V-BELT SET -INCLUDES 4-BELTS
2134-MM (84-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
9N-1324 V-BELT SET
9N-1324 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
1448-MM (57-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
9N-1325 V-BELT SET
9N-1325 V-BELT SET -INCLUDES 3-BELTS, FAN DRIVE
1486-MM (58.5-INCH) LONG. REQUIRES FAN DRIVE OR FAN DRIVE AND BELT TIGHTENER
AN ATTACHMENT
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
4W-2581 COVER GP-VALVE MECHANISM
4W-2581 COVER GP-VALVE MECHANISM
FOR USE WITH RADIATOR COOLED ENGINES
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
4W-8310 COVER GP-VALVE MECHANISM
4W-8310 COVER GP-VALVE MECHANISM
CANNOT BE USED WITH ENGINE THAT HAS MORE THAN 2 TURBOCHARGERS
AN ATTACHMENT
ROCKER ARM GP
7W-5926 ROCKER ARM GP
7W-5926 ROCKER ARM GP
PART OF 4N-7352 VALVE MECHANISM GP
ALSO AN ATTACHMENT
ROCKER ARM GP
7W-5927 ROCKER ARM GP
7W-5927 ROCKER ARM GP
PART OF 4N-7352 VALVE MECHANISM GP
ALSO AN ATTACHMENT
VALVE MECHANISM GP
4N-7352 VALVE MECHANISM GP
4N-7352 VALVE MECHANISM GP
S/N 8AR1-538
VALVE MECHANISM GP
4N-7352 VALVE MECHANISM GP
4N-7352 VALVE MECHANISM GP
S/N 8AR539-UP
ALSO AN ATTACHMENT
COVER GP-ENGINE
449-9116 KIT-FRONT COVER GASKET
449-9116 KIT-FRONT COVER GASKET
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@130-8413@@@@@
FIELD INSTALLATION

Information:

(For parts list, see above)

General Service Information
Tu-Flo 300 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 400, 500, 1000 Compressors
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 501 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 600 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 700 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Engine News
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Specifications
Air Compressor
3408C & 3412C INDUSTRIAL ENGINES
Service Magazine
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Specifications
Rear Balancer
3408C & 3412C INDUSTRIAL ENGINES
Belt Tension Chart
3408C & 3412C INDUSTRIAL ENGINES
Engine News
Cat<SUP>&reg;</SUP> Reman Has Added Valve Lifters, Rocker Arms, and Camshafts for Certain Engines and Generator Set Engines {1123, 1130, 1209, 1210}
2014/09/05
Specifications
Camshaft
3408C & 3412C INDUSTRIAL ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
CAT REMAN ANNOUNCES ADDITIONS TO CAMSHAFT PORTFOLIOS (UPDATED COVERAGE CHART)
CAT REMAN ANNOUNCES ADDITIONS TO CAMSHAFT PORTFOLIOS (UPDATED COVERAGE CHART)
Disassembly and Assembly
Camshaft
3408C & 3412C INDUSTRIAL ENGINES
Camshaft Bearings
3408C & 3412C INDUSTRIAL ENGINES
Engine News
Wider Crankshaft Gear Used{1204}
1999/09/01
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
A New Integral Seal Provides Improved Sealing {7555}
2003/12/01
A New Type of Main Bearing is Now Used {1203}
2007/09/17
Use Reuse and Salvage Guidelines for Measurements of Crankshafts which Includes the Crankshaft of the Remanufactured Engine with the Serial Number Prefix 1WW {1202}
2006/10/09
Usability of Main Bearings and Camshaft Bearings {1202, 1203, 1218, 1219}
2008/11/24
Special Instruction
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Service Letter-NACD
Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME
NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME
Specifications
Crankshaft
3408C & 3412C INDUSTRIAL ENGINES
Connecting Rod And Main Bearing Journals
3408C & 3412C INDUSTRIAL ENGINES
Crankshaft Rear Gear
3408C & 3412C INDUSTRIAL ENGINES
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Service Letter-China
Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Letter-APD
Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock
Disassembly and Assembly
Crankshaft Front Seal &amp; Wear Sleeve
3408C & 3412C INDUSTRIAL ENGINES
Crankshaft Rear Seal &amp; Wear Sleeve
3408C & 3412C INDUSTRIAL ENGINES
Crankshaft
3408C & 3412C INDUSTRIAL ENGINES
Crankshaft Main Bearings
3408C & 3412C INDUSTRIAL ENGINES
Service Magazine
Remanufactured 3412 Crankshafts {1202}
2000/01/24
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Engine News
Flywheel Housing To Cylinder Block Joint Improvements{1157,1201}
1997/01/22
New Block Cover Used{1201}
1999/05/01
The Cylinder Liners Have a New Appearance {1216}
2005/03/14
Special Instruction
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Technical Information Bulletin
Liner Flange Breakage
Liner Flange Breakage
Specifications
Cylinder Block
3408C & 3412C INDUSTRIAL ENGINES
Cylinder Liners
3408C & 3412C INDUSTRIAL ENGINES
Connecting Rod And Main Bearing Journals
3408C & 3412C INDUSTRIAL ENGINES
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Disassembly and Assembly
Valve Seat Inserts
3408C & 3412C INDUSTRIAL ENGINES
Spacer Plates
3408C & 3412C INDUSTRIAL ENGINES
Camshaft Bearings
3408C & 3412C INDUSTRIAL ENGINES
Cylinder Liners
3408C & 3412C INDUSTRIAL ENGINES
Crankshaft Main Bearings
3408C & 3412C INDUSTRIAL ENGINES
Piston Cooling Tubes
3408C & 3412C INDUSTRIAL ENGINES
Engine News
Be Sure To Use The Correct Inlet And Exhaust Valves In Engines Equipped With Valve Bridges That Do Not Ride On Dowels{1105,1121}
1998/03/01
Remanufactured 3412 Crankshafts {1100}
2000/01/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefixes 1WW, BFF, DLA, BFD, BKY, BLR, ECP, BGE, BKS, BLJ, B1A, BNF and 2MZ {1101, 7754}
2006/04/10
Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Commercial Engines {1100}
Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Commercial Engines {1100}
A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13
Special Instruction
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Specifications
Fuel Injection Nozzle And Adapter
3408C & 3412C INDUSTRIAL ENGINES
Valves, Valve Springs And Valve Seat Inserts
3408C & 3412C INDUSTRIAL ENGINES
Cylinder Heads
3408C & 3412C INDUSTRIAL ENGINES
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
Disassembly and Assembly
Cylinder Head
3408C & 3412C INDUSTRIAL ENGINES
Valves
3408C & 3412C INDUSTRIAL ENGINES
Valve Guides
3408C & 3412C INDUSTRIAL ENGINES
Bridge Dowels
3408C & 3412C INDUSTRIAL ENGINES
Valve Seat Inserts
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Nozzles & Adapters
3408C & 3412C INDUSTRIAL ENGINES
Engine News
Procedure for Installing the Front Gears and Dampers on Certain Caterpillar Engines {1151, 1162, 1205, 1206}
2008/02/25
Specifications
Damper And Pulley Group
3408C & 3412C INDUSTRIAL ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Vibration Damper &amp; Pulley
3408C & 3412C INDUSTRIAL ENGINES
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Procedure for Installing the Front Gears and Dampers on Certain Caterpillar Engines {1151, 1162, 1205, 1206}
2008/02/25
Specifications
Auxiliary Drive Group
3408C & 3412C INDUSTRIAL ENGINES
Disassembly and Assembly
Water Pump
3408C & 3412C INDUSTRIAL ENGINES
Governor &amp; Fuel Pump Drive
3408C & 3412C INDUSTRIAL ENGINES
Engine News
Proper Storage Procedures Are Available For Commercial Engines {1000}
Proper Storage Procedures Are Available For Commercial Engines {1000}
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Flywheel Housing To Cylinder Block Joint Improvements{1157,1201}
1997/01/22
Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
2007/12/24
Service Letter-NACD
Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Rear Gear Group
3408C & 3412C INDUSTRIAL ENGINES
Crankshaft Rear Gear
3408C & 3412C INDUSTRIAL ENGINES
Flywheel Housing
3408C & 3412C INDUSTRIAL ENGINES
Flywheel
3408C & 3412C INDUSTRIAL ENGINES
Service Letter-China
Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Service Letter-APD
Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock
Disassembly and Assembly
Flywheel
3408C & 3412C INDUSTRIAL ENGINES
Flywheel Housing
3408C & 3412C INDUSTRIAL ENGINES
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Wider Crankshaft Gear Used{1204}
1999/09/01
A 117-9712 Drive Idler Shaft Must be Used {1151, 1162, 1206}
2006/04/24
Procedure for Installing the Front Gears and Dampers on Certain Caterpillar Engines {1151, 1162, 1205, 1206}
2008/02/25
A New Drive Idler Shaft Must be Used on Some 3408 and 3412 Engines {1151, 1162, 1206}
2009/10/23
Service Letter-NACD
Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Front Gear Group (Timing)
3408C & 3412C INDUSTRIAL ENGINES
Front Housing And Covers
3408C & 3412C INDUSTRIAL ENGINES
Rear Gear Group
3408C & 3412C INDUSTRIAL ENGINES
Crankshaft Rear Gear
3408C & 3412C INDUSTRIAL ENGINES
Service Letter-China
Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Service Letter-APD
Remove All 1140966 Crank Gears From Parts Stock
Remove All 1140966 Crank Gears From Parts Stock
Disassembly and Assembly
Timing Gear Cover
3408C & 3412C INDUSTRIAL ENGINES
Timing Gears
3408C & 3412C INDUSTRIAL ENGINES
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Flywheel Housing To Cylinder Block Joint Improvements{1157,1201}
1997/01/22
New Cast Iron Flywheel Housing Used In Flywheel Housing Groups {1157}
1998/01/20
A New Integral Seal Provides Improved Sealing {7555}
2003/12/01
A New Front and Rear Cover Seal Is Available for Certain 3400 Series Industrial Engines {1151, 1157, 7555}
2013/03/29
Specifications
Flywheel Housing
3408C & 3412C INDUSTRIAL ENGINES
Disassembly and Assembly
Crankshaft Rear Seal &amp; Wear Sleeve
3408C & 3412C INDUSTRIAL ENGINES
Flywheel Housing
3408C & 3412C INDUSTRIAL ENGINES
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
A 117-9712 Drive Idler Shaft Must be Used {1151, 1162, 1206}
2006/04/24
Procedure for Installing the Front Gears and Dampers on Certain Caterpillar Engines {1151, 1162, 1205, 1206}
2008/02/25
A New Front and Rear Cover Seal Is Available for Certain 3400 Series Industrial Engines {1151, 1157, 7555}
2013/03/29
Specifications
Front Housing And Covers
3408C & 3412C INDUSTRIAL ENGINES
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Crankshaft Front Seal &amp; Wear Sleeve
3408C & 3412C INDUSTRIAL ENGINES
Timing Gear Cover
3408C & 3412C INDUSTRIAL ENGINES
Crankshaft Front Seal &amp; Wear Sleeve
3408C & 3412C INDUSTRIAL ENGINES
Crankshaft Rear Seal &amp; Wear Sleeve
3408C & 3412C INDUSTRIAL ENGINES
Technical Information Bulletin
Some 9X-7803 Alternators Were Mislabeled As 8C-6163
Some 9X-7803 Alternators Were Mislabeled As 8C-6163
Specifications
Oil Pan
3408C & 3412C INDUSTRIAL ENGINES
Disassembly and Assembly
Oil Pan
3408C & 3412C INDUSTRIAL ENGINES
Engine News
New Guidelines for Inspecting Pistons {1214}
2006/01/02
A New Cylinder Pack Is Now Used {1225, 1239}
A New Cylinder Pack Is Now Used {1225, 1239}
Usability of Main Bearings and Camshaft Bearings {1202, 1203, 1218, 1219}
2008/11/24
An Improved Top Piston Ring Is Now Used on Aluminum Pistons in Certain 3406, 3408, and 3412 Engines {1215}
2012/04/24
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM TO REPLACE CYLINDER PACKS ON CERTAIN 3408C, 3412C, 3412E COMMERCIAL ENGINES; 836 AND 844 COMPACTORS; 988F AND 990 WHEEL LOADERS, 5110 EXCAVATORS; 24H MOTOR GRADERS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; 69D, 73D, 769D, 771D, 7
PRODUCT SUPPORT PROGRAM TO REPLACE CYLINDER PACKS ON CERTAIN 3408C, 3412C, 3412E COMMERCIAL ENGINES; 836 AND 844 COMPACTORS; 988F AND 990 WHEEL LOADERS, 5110 EXCAVATORS; 24H MOTOR GRADERS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; 69D, 73D, 769D, 771D, 7
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Connecting Rod Bearings
Connecting Rod Bearings
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Connecting Rod And Main Bearing Journals
3408C & 3412C INDUSTRIAL ENGINES
Connecting Rods
3408C & 3412C INDUSTRIAL ENGINES
Pistons And Rings
3408C & 3412C INDUSTRIAL ENGINES
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Letter-China
PRODUCT SUPPORT PROGRAM TO REPLACE CYLINDER PACKS ON CERTAIN 3408C, 3412C, 3412E COMMERCIAL ENGINES; 836 AND 844 COMPACTORS; 988F AND 990 WHEEL LOADERS, 5110 EXCAVATORS; 24H MOTOR GRADERS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; 69D, 73D, 769D, 771D, 7
PRODUCT SUPPORT PROGRAM TO REPLACE CYLINDER PACKS ON CERTAIN 3408C, 3412C, 3412E COMMERCIAL ENGINES; 836 AND 844 COMPACTORS; 988F AND 990 WHEEL LOADERS, 5110 EXCAVATORS; 24H MOTOR GRADERS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; 69D, 73D, 769D, 771D, 7
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Service Letter-APD
PRODUCT SUPPORT PROGRAM TO REPLACE CYLINDER PACKS ON CERTAIN 3408C, 3412C, 3412E COMMERCIAL ENGINES; 836 AND 844 COMPACTORS; 988F AND 990 WHEEL LOADERS, 5110 EXCAVATORS; 24H MOTOR GRADERS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; 69D, 73D, 769D, 771D, 7
PRODUCT SUPPORT PROGRAM TO REPLACE CYLINDER PACKS ON CERTAIN 3408C, 3412C, 3412E COMMERCIAL ENGINES; 836 AND 844 COMPACTORS; 988F AND 990 WHEEL LOADERS, 5110 EXCAVATORS; 24H MOTOR GRADERS; 631E, 633E, 637E, 651E, AND 657E SCRAPERS; 69D, 73D, 769D, 771D, 7
Disassembly and Assembly
Pistons
3408C & 3412C INDUSTRIAL ENGINES
Connecting Rod Bearings
3408C & 3412C INDUSTRIAL ENGINES
Specifications
Rear Power Take-Off Clutch
3408C & 3412C INDUSTRIAL ENGINES
Damper And Pulley Group
3408C & 3412C INDUSTRIAL ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper &amp; Pulley
3408C & 3412C INDUSTRIAL ENGINES
Engine News
Different Housings are Used on 3400 Remanufactured Engines {1304}
Different Housings are Used on 3400 Remanufactured Engines {1304}
Specifications
Stub Shaft
3408C & 3412C INDUSTRIAL ENGINES
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Specifications
Belt Tension Chart
3408C & 3412C INDUSTRIAL ENGINES
Engine News
Be Sure To Use The Correct Inlet And Exhaust Valves In Engines Equipped With Valve Bridges That Do Not Ride On Dowels{1105,1121}
1998/03/01
A Improved Guide Spring is Now Used {1108}
2005/11/28
A New Guide Spring for the Camshaft Lifter is Now Used {1102}
2008/03/17
A New Tool Is Used to Insert the Valve Lifter Guide Spring into Certain Commercial Engines {0703, 1102}
2012/12/06
Cat<SUP>&reg;</SUP> Reman Has Added Valve Lifters, Rocker Arms, and Camshafts for Certain Engines and Generator Set Engines {1123, 1130, 1209, 1210}
2014/09/05
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Technical Information Bulletin
Blocked Oil Passages on the 3408, 3408C, G3408, 3412, 3412C, and G3412 Industrial and Commercial Engines
Blocked Oil Passages on the 3408, 3408C, G3408, 3412, 3412C, and G3412 Industrial and Commercial Engines
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
Specifications
Valve Mechanism Covers
3408C & 3412C INDUSTRIAL ENGINES
Valve Rocker Arms, Lifters And Bridges
3408C & 3412C INDUSTRIAL ENGINES
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Valve Covers
3408C & 3412C INDUSTRIAL ENGINES
Rocker Shaft Assembly
3408C & 3412C INDUSTRIAL ENGINES
Valve Lifters &amp; Push Rods
3408C & 3412C INDUSTRIAL ENGINES
Bridge Dowels
3408C & 3412C INDUSTRIAL ENGINES
Governor &amp; Fuel Pump Drive
3408C & 3412C INDUSTRIAL ENGINES
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Disassembly and Assembly
Flywheel Housing
3408C & 3412C INDUSTRIAL ENGINES
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Engine News
A New Improved Seal Is Now Used in the Reman Water Pumps of Certain Engines {1000, 1361, 7555}
2012/05/09

Truck sale:

Caterpillar 3412C
 
Caterpillar 3412C
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3412C, Stationary Generator Sets, Construction
95,000 
Caterpillar 3412C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3412C, Stationary Generator Sets, Construction
145,000 
Caterpillar 3412C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
74,900 
Caterpillar 3412CEP, Stationary Generator Sets, Construction


Caterpillar 3412C
 
Caterpillar 3412C
- Marine Propulsion / Auxiliary Engines
HAWTHORNE POWER SYSTEMS
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.