AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4P-3068 CLUTCH GP PART OF 4P-3069 POWER TAKE-OFF GP AN ATTACHMENT 3408E INDUSTRIAL ENGINE


BASIC ENGINE
CLUTCH GP
CYLINDER BLOCK GP
HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
PAN GP-OIL
VALVE MECHANISM GP
CRANKSHAFT GP

INDUSTRIAL ENGINE 3408E INDUSTRIAL ENGINE 7PR
 3408E Industrial Engine 7PR00001-UP SEBP2509 3408E 7PR   (1995)

BASIC ENGINE

CLUTCH GP
CLUTCH GP
1W-8856 CLUTCH GP
CLUTCH GP
4P-0410 CLUTCH GP
CLUTCH GP
4P-3068 CLUTCH GP
CLUTCH GP
4P-3073 CLUTCH GP
 

#SEBP25090030
 

4P-3068: CLUTCH GP

4P-3068 CLUTCH GP
PART OF 4P-3069 POWER TAKE-OFF GP
AN ATTACHMENT
i00375409 SEBP2509
4P3068 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3408E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-8460 [1] RING-DRIVE  
2. 7C-8373 [1] SHAFT-STUB  
3. 8L-5159 [1] BALL BEARING  
4. 1A-8063 [1] BOLT (3/4-10X2.5-IN)  
5. 7C-3872 [1] WASHER-RETAINING  
6. 7C-3871 B [1] SHIM-RETAINER (0.13-MM THK)  
  7C-3877 B [1] SHIM-RETAINER (0.18-MM THK)  
  7C-3878 B [1] SHIM-RETAINER (0.51-MM THK)  
7. 7W-7535 [1] HUB  
8. 5N-6136 [3] PLATE-DRIVE  
9. 8L-8462 [2] PLATE AS-CENTER  
10. 8L-8459 [1] PLATE-PRESSURE  
11. 6L-3963 [4] PIN-COTTER  
12. 8L-5107 [4] LEVER  
13. 8L-5188 [4] PIN  
14. 8L-8457 [1] YOKE-ADJUSTMENT  
15. 6L-3962 [8] PIN-COTTER  
16. 8L-5095 [8] LINK-LEVER  
17. 8L-5200 [4] PIN  
18. 8L-5199 [4] PIN  
19. 8L-8458 [1] SLEEVE-SLIDING  
20. 8L-5105 [1] COLLAR AS-SLEEVE  
21. 2K-0564 [2] LOCKNUT (1/2-20-THD)  
22. 8L-5186 B [2] SHIM (0.06-IN THK)  
23. 0V-0375 [2] BOLT (1/2-13X3.25-IN)  
24. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
25. 9S-1354 [1] NUT (5/8-18-THD)  
26. 6F-0253 [1] LOCKWASHER  
27. 4M-5317 [1] BUSHING-REDUCER  
28. 8L-5096 [1] HOSE AS  
29. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
30. 2W-7879 [1] HOUSING-CLUTCH  
31. 8L-5094 [1] RING-COLLAR  
32. 1C-0569 [2] BOLT (5/16-18X0.5-IN)  
33. 8L-5679 [1] RING-RETAINING  
34. 3N-1462 [1] PIN AS  
35. 3N-1461 [1] SPRING  
36. 2H-3755 [1] BOLT (5/16-18X0.43-IN)  
37. 5B-2407 [1] LOCK  
38. 8L-5099 [1] RETAINER-BEARING  
39. 1B-8702 [1] KEY-WOODRUFF  
40. 6V-8234 [1] PIN-SPRING  
41. 5D-7449 [2] CUP-BEARING  
42. 6B-8575 [1] KEY-SQUARE  
43. 7W-7534 [1] SHAFT  
44. 9Y-4298 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
45. 4F-7499 [2] CONE-BEARING  
46. 4B-9782 [1] BALL  
47. 2W-7878 [1] CARRIER AS-BEARING  
48. 0S-1625 [8] BOLT (5/8-11X2.5-IN)  
49. 2W-4905 [2] RING-SEAL  
50. 2B-0858 [2] PLUG-PIPE  
51. 7H-3171 [1] PLUG-PIPE  
52. 4W-2655 [1] LEVER-HAND CONTROL  
53. 2W-7876 [1] FORK-THROW-OUT  
54. 1D-4539 [1] BOLT (5/16-18X2.5-IN)  
55. 8L-5101 [1] SHAFT  
56. 1B-8737 [2] KEY-WOODRUFF  
  B   USE AS REQUIRED
 

#SEBP25090031
 

4P-3073: CLUTCH GP

4P-3073 CLUTCH GP
PART OF 4P-3074 POWER TAKE-OFF GP
FOR USE WITH SAE NO. 1 FLYWHEEL AND FLYWHEEL HOUSING
AN ATTACHMENT
i00375417 SEBP2509
4P3073 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3408E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-3527 [2] PLATE-CLUTCH DRIVING  
2. 5L-9652 [1] HUB  
3. 8B-7987 [1] KEY-WOODRUFF  
4. 5L-9653 [1] NUT  
  5L-9654 [1] LOCK  
5. 3H-9571 [1] PLATE-CENTER  
6. 5N-9317 [1] RING-DRIVE  
7. 7F-8897 [1] PLATE  
8. 3H-9572 [1] RING-ADJUSTMENT  
9. 3H-9574 [1] SLEEVE  
10. 4B-4754 [1] SHAFT  
  6L-5151 [2] KEY-WOODRUFF  
11. 4B-4792 [1] YOKE AS  
12. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  3B-4506 [2] LOCKWASHER  
13. 1A-1460 [6] BOLT (1/2-13X2-IN)  
  5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 5L-9655 [1] RETAINER-BEARING  
15. 9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
16. 4B-4716 [1] COLLAR AS-SLEEVE  
17. 0L-0639 [2] BOLT (3/8-24X2.25-IN)  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
  4B-4758 B [2] SHIM (0.06-IN THK)  
18. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
  3F-9556 [1] LOCKWASHER  
  5B-2407 [1] LOCK  
19. 5B-2410 E [1] HOSE AS (38.1-CM)  
20. 4B-4721 [8] LINK  
  6L-3967 [8] PIN  
  3B-5301 [8] PIN-COTTER  
21. 6L-3972 [4] PIN  
  3B-4627 [4] PIN-COTTER  
  1L-4863 [8] WASHER-SPRING  
22. 4H-0002 [4] LEVER  
23. 108-3561 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)(SERVICING)  
24. 3N-8125 [1] PLATE AS-PRESSURE  
25. 3N-8124 [1] SPRING  
  3N-8123 [1] LOCK PIN  
26. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
27. 3N-4896 [1] SHAFT-CLUTCH  
28. 1S-7443 [4] SCREW-MACHINE  
  1H-3338 [4] LOCKWASHER  
29. 6B-3223 [2] CUP-BEARING  
30. 4B-7270 [2] CONE-BEARING  
31. 4B-4810 [1] LEVER AS-HAND  
32. 7F-8916 [1] CARRIER-BEARING  
33. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
34. 7W-7155 [1] HOUSING-CLUTCH  
35. 108-3560 [1] PLATE-WARNING (POWER TAKE-OFF)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP25090032
 

4N-6866: COVER GP-CYLINDER BLOCK

4N-6866 COVER GP-CYLINDER BLOCK
S/N 7PR1-837
i00107931 SEBP2509
4N6866 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3408E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1683 [1] COVER  
2. 239-5571 [1] SEAL-INTEGRAL  
3. 0S-1594 [12] BOLT (3/8-16X1-IN)  
4. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 2P-2772 [1] COVER  
6. 234-8937 [1] SEAL-INTEGRAL  
7. 4N-0794 [1] COVER  
8. 239-5572 [1] SEAL-INTEGRAL  
9. 4N-1682 [1] COVER  
10. 4N-0864 [1] GASKET  
 

#SEBP25090033
 

4N-1902: COVER GP-FLYWHEEL HOUSING

4N-1902 COVER GP-FLYWHEEL HOUSING
S/N 7PR1-837
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
i00370023 SEBP2509
4N1902 COVER GP-FLYWHEEL HOUSING Parts scheme
  For full view, you need register

Parts for your 3408E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [1] BOLT (3/8-16X1-IN)  
2. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 2P-2772 [1] COVER  
  4N-0933 [1] GASKET  
4. 0S-1619 [1] BOLT (3/8-16X3-IN)  
5. 4P-8425 [1] COVER-ACCESSORY DRIVE  
6. 5F-3144 [1] SEAL-O-RING  
7. 0L-1352 [3] BOLT (3/8-16X3.25-IN)  
8. 6F-7012 [2] STUD-TAPERLOCK (3/8-16X1.57-IN)  
  9S-8752 [2] NUT-FULL (3/8-16-THD)  
9. 2M-0849 [1] WASHER-HARD (13.5X25.5X5-MM THK)  
10. 2J-1020 [1] SPACER (13.9X21.34X35-MM THK)  
11. 1F-7958 [3] NUT-FULL (1/2-13-THD)  
12. 4N-9793 [1] COVER  
13. 5P-8940 [1] SEAL-O-RING  
14. 1A-1593 [2] STUD (1/2-13X1.875-IN)  
15. 3S-8313 [1] PLUG-CUP  
16. 0S-1566 [3] BOLT (5/8-11X1.5-IN)  
  5P-8247 [3] WASHER-HARD (17X32X3.5-MM THK)  
17. 4N-1114 [1] COVER  
  9Y-6089 [1] GASKET  
 

#SEBP25090034
 

4N-7798: COVER GP-FLYWHEEL HOUSING

4N-7798 COVER GP-FLYWHEEL HOUSING
S/N 7PR1-837
REAR STRUCTURE
i00370964 SEBP2509
4N7798 COVER GP-FLYWHEEL HOUSING Parts scheme
  For full view, you need register

Parts for your 3408E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [3] BOLT (3/8-16X1-IN)  
2. 5M-2894 [14] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 2P-2772 [2] COVER  
  4N-0933 [2] GASKET  
4. 0S-1619 [1] BOLT (3/8-16X3-IN)  
5. 1A-0291 [1] COVER-SHAFT  
  2M-5446 [1] GASKET  
6. 1A-2029 [8] BOLT (3/8-16X1.125-IN)  
7. 4P-8425 C [1] COVER-ACCESSORY DRIVE  
8. 6F-7012 [2] STUD-TAPERLOCK (3/8-16X1.57-IN)  
  9S-8752 C [2] NUT-FULL (3/8-16-THD)  
9. 0S-1566 [3] BOLT (5/8-11X1.5-IN)  
  5P-8247 [3] WASHER-HARD (17X32X3.5-MM THK)  
10. 4N-1114 [1] COVER  
11. 9Y-6089 C [1] GASKET  
12. 4P-7820 C [1] COVER-ACCESSORY DRIVE  
13. 125-9794 C [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25090035
 

126-0768: COVER GP-FRONT HOUSING

126-0768 COVER GP-FRONT HOUSING
S/N 7PR1-837
i00093595 SEBP2509
1260768 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 3408E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5576 [1] COVER-FUEL PUMP GEAR  
2. 193-9155 [1] GASKET  
3. 116-5821 [1] SUPPORT-HOUSING (RH)  
4. 116-6264 [1] SUPPORT-HOUSING (LH)  
5. 3S-1307 [4] BOLT-12 POINT HEAD (3/8-16X2-IN)  
6. 5F-4899 [4] BOLT (3/8-16X5.5-IN)  
7. 0L-1352 [6] BOLT (3/8-16X3.25-IN)  
8. 5M-2894 [9] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 9S-8752 [7] NUT-FULL (3/8-16-THD)  
10. 3K-3256 [1] STUD-TAPERLOCK (3/8-16X1.7-IN)  
11. 2P-1974 [3] STUD-TAPERLOCK (3/8-16X4.2-IN)  
12. 3B-4589 [1] STUD (3/8-IN NCX3-5/8)  
13. 3M-0496 [1] STUD-TAPERLOCK (3/8-16X2.6-IN)  
14. 6N-2508 [1] GASKET  
15. 6N-2509 [1] COVER  
16. 0S-1594 [3] BOLT (3/8-16X1-IN)  
17. 125-9794 [1] SEAL-O-RING  
18. 4P-7820 [1] COVER-ACCESSORY DRIVE  
 

#SEBP25090036
 

4N-8159: COVER GP-OIL PAN

4N-8159 COVER GP-OIL PAN
S/N 7PR1-837
i00107948 SEBP2509
4N8159 COVER GP-OIL PAN Parts scheme
  For full view, you need register

Parts for your 3408E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4185 [1] PLUG (3/4-16-THD)  
  8L-2786 [1] SEAL-O-RING  
2. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 4N-9968 [2] PLUG  
  109-0072 [2] SEAL-O-RING  
4. 0S-1587 [2] BOLT (1/2-13X1.75-IN)  
5. 4P-0519 [1] ADAPTER AS-DRAIN  
  4P-0520 [1] ADAPTER-PLUG  
6. 4P-0513 [1] PLUG-OIL DRAIN (ENGINE OIL)  
7. 379-5053 [1] SEAL-O-RING  
 

#SEBP25090037
 

128-5417: COVER GP-VALVE MECHANISM

128-5417 COVER GP-VALVE MECHANISM
S/N 7PR1-837
i00520931 SEBP2509
1285417 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3408E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-9015 [3] COVER AS-VALVE  
    (EACH INCLUDES)
  272-2583 [1] SEAL-O-RING  
  7C-6514 [1] ADAPTER  
2. 114-8684 [1] COVER-VALVE MECHANISM  
3. 1B-2790 [44] BOLT (5/16-18X1.375-IN)  
4. 9M-1974 [44] WASHER-HARD (8.8X16X2-MM THK)  
5. 106-9488 [4] BASE-VALVE MECHANISM COVER  
6. 108-3956 [8] SEAL-DIAMOND  
7. 4N-4668 [2] BREATHER AS (CRANKCASE)  
8. 6V-3831 [2] SEAL-O-RING  
9. 2N-8109 [2] CLAMP  
 

#SEBP25090038
 

1W-5009: CRANKSHAFT AS

1W-5009 CRANKSHAFT AS
S/N 7PR1-837
PART OF 1W-5010 CRANKSHAFT GP
i00093383 SEBP2509
1W5009 CRANKSHAFT AS Parts scheme
  For full view, you need register

Parts for your 3408E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0684 [1] DOWEL  
2. 8T-6757 [5] PLUG-PIPE  
3. 7S-5005 [1] DOWEL  
4. 7N-7591 [1] GEAR-CRANKSHAFT (80-TEETH)  
 

#SEBP25090039
 

1W-5010: CRANKSHAFT GP

1W-5010 CRANKSHAFT GP
S/N 7PR1-837
i00093384 SEBP2509
1W5010 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3408E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-5009 Y [1] CRANKSHAFT AS  
2. 317-8766 [5] BEARING-MAIN (STANDARD)  
  4W-5698 AB BEARING-MAIN (0.63-MM US)  
  4W-5699 AB BEARING-MAIN (1.27-MM US)  
  4W-5700 AB BEARING-MAIN (0.63-MM OS)  
  4W-5701 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
3. 253-1752 C [2] PLATE-THRUST  
4. 319-7401 Y [1] SEAL GP-CRANKSHAFT (FRONT)  
5. 319-0785 Y [1] SEAL GP-CRANKSHAFT (REAR)(FLYWHEEL HOUSING)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Power Take-Off Clutch - Check/Adjust/Lubricate
3408E and 3412E Industrial Engines
Engaging the Driven Equipment
3408E and 3412E Industrial Engines
Specifications
Power Take-Off Clutch
3408E and 3412E Industrial Engines

Caterpillar Parts SIS Catalog 3408E :

CLUTCH GP
4P-0410 CLUTCH GP
CLUTCH GP
1W-8856 CLUTCH GP
CAMSHAFT GP
108-1547 CAMSHAFT GP
196-9524 BEARING GP-MAIN
BALANCER GP
4N-1092 BALANCER GP
AIR COMPRESSOR GP
9N-5563 AIR COMPRESSOR GP
7N-8411 AIR COMPRESSOR GP
AIR COMPRESSOR GP
7N-7722 AIR COMPRESSOR GP
CLUTCH GP
4P-3073 CLUTCH GP
COVER GP-CYLINDER BLOCK
4N-6866 COVER GP-CYLINDER BLOCK
COVER GP-FLYWHEEL HOUSING
4N-1902 COVER GP-FLYWHEEL HOUSING
COVER GP-FLYWHEEL HOUSING
4N-7798 COVER GP-FLYWHEEL HOUSING
COVER GP-FRONT HOUSING
126-0768 COVER GP-FRONT HOUSING
COVER GP-OIL PAN
4N-8159 COVER GP-OIL PAN
COVER GP-VALVE MECHANISM
128-5417 COVER GP-VALVE MECHANISM
CRANKSHAFT AS
1W-5009 CRANKSHAFT AS

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.