AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

129-1674 CYLINDER HEAD GP S/N 4CR1-500 3412E INDUSTRIAL ENGINE


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP

INDUSTRIAL ENGINE 3412E INDUSTRIAL ENGINE 4CR
 3412E Industrial Engine 4CR00001-UP SEBP2510 3412E 4CR   (1995)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD GP
108-1887 CYLINDER HEAD GP
CYLINDER HEAD GP
108-1887 CYLINDER HEAD GP
CYLINDER HEAD GP
129-1674 CYLINDER HEAD GP
CYLINDER HEAD GP
129-1674 CYLINDER HEAD GP
CYLINDER HEAD GP
129-1674 CYLINDER HEAD GP
CYLINDER HEAD GP
129-1674 CYLINDER HEAD GP
 

#SEBP25100060
 

129-1674: CYLINDER HEAD GP

129-1674 CYLINDER HEAD GP
S/N 4CR1-500
i00522895 SEBP2510
1291674 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-1887 Y [2] CYLINDER HEAD GP  
2. 123-4731 [2] MANIFOLD (HEUI FLUID)  
3. 106-1792 [24] STUD-TAPERLOCK (3/8-16X4-IN)  
4. 1D-4541 [12] BOLT (5/16-18X3-IN)  
5. 5P-7684 [4] PLUG  
6. 108-5806 [4] SEAL-O-RING  
7. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
8. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 9S-8752 [26] NUT-FULL (3/8-16-THD)  
10. 108-5803 [2] SEAL-O-RING  
11. 9S-8006 [2] PLUG (7/8-14-THD)  
12. 1N-5999 [1] PLUG-O-RING  
13. 6V-2485 Y [1] SENSOR GP-PRESSURE (INJECTON ACTUATION OIL)  
14. 110-1627 [4] PLATE  
15. 7W-3447 [14] SPACER (10.2X19.05X10.2-MM THK)  
16. 103-6091 [1] SENSOR GP-PRESSURE (TURBO OUTLET)  
  3E-3368 [1] WEDGE-PLUG LOCK (3-PIN)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE (30CM)  
  102-8808 [1] KIT-CONNECTING PLUG (3-PIN)  
  102-8813 [1] SEAL  
17. 9X-0263 [1] ADAPTER  
18. 6V-5048 [1] SEAL-O-RING  
19. 9S-8004 [4] PLUG (9/16-18-THD)  
20. 6V-5049 [4] SEAL-O-RING  
21. 2K-2813 [40] BOLT (3/4-16X10-IN)  
  5H-1504 [40] WASHER-HARD (20X33.5X5-MM THK)  
22. 061-8561 [12] SEAL-O-RING  
23. 6V-5266 [12] SEAL-O-RING  
24. 107-9570 [24] SEAL-O-RING  
25. 108-0219 [12] SLEEVE  
26. 7E-7312 [2] GASKET-CYLINDER HEAD  
27. 2N-7174 [12] GASKET  
28. 3E-6772 [48] SEAL (WATER)  
29. 1U-8846 B SEALANT-GASKET  
30. 033-6027 [2] SEAL-O-RING  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25100061
 

129-1674: CYLINDER HEAD GP

129-1674 CYLINDER HEAD GP
S/N 4CR501-504
i00522896 SEBP2510
1291674 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-1887 Y [2] CYLINDER HEAD GP  
2. 123-4731 [2] MANIFOLD (HEUI FLUID)  
3. 106-1792 [24] STUD-TAPERLOCK (3/8-16X4-IN)  
4. 1D-4541 [12] BOLT (5/16-18X3-IN)  
5. 5P-7684 [4] PLUG  
6. 108-5806 [4] SEAL-O-RING  
7. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
8. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 9S-8752 [26] NUT-FULL (3/8-16-THD)  
10. 108-5803 [2] SEAL-O-RING  
11. 9S-8006 [2] PLUG (7/8-14-THD)  
12. 1N-5999 [1] PLUG-O-RING  
13. 121-2725 [1] SENSOR GP-PRESSURE (INJECTION ACTUATION OIL)  
  3E-3368 [1] WEDGE-PLUG LOCK (3-PIN)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 BE SLEEVE  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
14. 110-1627 [4] PLATE  
15. 7W-3447 [14] SPACER (10.2X19.05X10.2-MM THK)  
16. 103-6091 [1] SENSOR GP-PRESSURE (TURBO OUTLET)  
  3E-3368 [1] WEDGE-PLUG LOCK (3-PIN)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 BE SLEEVE  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  102-8813 [1] SEAL  
17. 9X-0263 [1] ADAPTER  
18. 6V-5048 [1] SEAL-O-RING  
19. 9S-8004 [4] PLUG (9/16-18-THD)  
20. 6V-5049 [4] SEAL-O-RING  
21. 2K-2813 [40] BOLT (3/4-16X10-IN)  
  5H-1504 [40] WASHER-HARD (20X33.5X5-MM THK)  
22. 061-8561 [12] SEAL-O-RING  
23. 6V-5266 [12] SEAL-O-RING  
24. 107-9570 [24] SEAL-O-RING  
25. 108-0219 [12] SLEEVE  
26. 7E-7312 [2] GASKET-CYLINDER HEAD  
27. 2N-7174 [12] GASKET  
28. 3E-6772 [48] SEAL (WATER)  
29. 1U-8846 B SEALANT-GASKET  
30. 033-6027 [2] SEAL-O-RING  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25100062
 

129-1674: CYLINDER HEAD GP

129-1674 CYLINDER HEAD GP
S/N 4CR505-511
i00522897 SEBP2510
1291674 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-1887 Y [2] CYLINDER HEAD GP  
2. 123-4731 [2] MANIFOLD (HEUI FLUID)  
3. 106-1792 [24] STUD-TAPERLOCK (3/8-16X4-IN)  
4. 1D-4541 [12] BOLT (5/16-18X3-IN)  
5. 5P-7684 [4] PLUG  
6. 108-5806 [4] SEAL-O-RING  
7. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
8. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 9S-8752 [26] NUT-FULL (3/8-16-THD)  
10. 108-5803 [2] SEAL-O-RING  
11. 9S-8006 [2] PLUG (7/8-14-THD)  
12. 1N-5999 [1] PLUG-O-RING  
13. 6V-2485 Y [1] SENSOR GP-PRESSURE (INJECTION ACTUATION OIL)  
14. 110-1627 [4] PLATE  
15. 7W-3447 [14] SPACER (10.2X19.05X10.2-MM THK)  
16. 103-6091 [1] SENSOR GP-PRESSURE (TURBO OUTLET)  
  3E-3368 [1] WEDGE-PLUG LOCK (3-PIN)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 BE SLEEVE  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  102-8813 [1] SEAL  
17. 9X-0263 [1] ADAPTER  
18. 6V-5048 [1] SEAL-O-RING  
19. 9S-8004 [4] PLUG (9/16-18-THD)  
20. 6V-5049 [4] SEAL-O-RING  
21. 2K-2813 [40] BOLT (3/4-16X10-IN)  
  5H-1504 [40] WASHER-HARD (20X33.5X5-MM THK)  
22. 061-8561 [12] SEAL-O-RING  
23. 6V-5266 [12] SEAL-O-RING  
24. 107-9570 [24] SEAL-O-RING  
25. 108-0219 [12] SLEEVE  
26. 7E-7312 [2] GASKET-CYLINDER HEAD  
27. 2N-7174 [12] GASKET  
28. 3E-6772 [48] SEAL (WATER)  
29. 1U-8846 B SEALANT-GASKET  
30. 033-6027 [2] SEAL-O-RING  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25100063
 

129-1674: CYLINDER HEAD GP

129-1674 CYLINDER HEAD GP
S/N 4CR512-UP
i00522898 SEBP2510
1291674 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-1887 Y [2] CYLINDER HEAD GP  
2. 141-6607 [2] MANIFOLD (HEUI FLUID)  
3. 106-1792 [24] STUD-TAPERLOCK (3/8-16X4-IN)  
4. 1D-4541 [12] BOLT (5/16-18X3-IN)  
5. 5P-7684 [4] PLUG  
6. 108-5806 [4] SEAL-O-RING  
7. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
8. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 9S-8752 [26] NUT-FULL (3/8-16-THD)  
10. 108-5803 [2] SEAL-O-RING  
11. 9S-8006 [2] PLUG (7/8-14-THD)  
12. 1N-5999 [1] PLUG-O-RING  
13. 167-1709 CY [1] SENSOR GP-PRESSURE (INJECTION ACTUATION OIL)  
14. 110-1627 [4] PLATE  
15. 7W-3447 [14] SPACER (10.2X19.05X10.2-MM THK)  
16. 194-6724 Y [1] SENSOR GP-PRESSURE (TURBO OUTLET)  
17. 9X-0263 [1] ADAPTER  
18. 6V-5048 [1] SEAL-O-RING  
19. 9S-8004 [4] PLUG (9/16-18-THD)  
20. 214-7568 [4] SEAL-O-RING  
21. 107-7322 [40] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
  236-0486 [1] BOLT-12 POINT HEAD (3/4-16X10-IN)  
22. 061-8561 [12] SEAL-O-RING  
23. 6V-5266 [12] SEAL-O-RING  
24. 107-9570 [24] SEAL-O-RING  
25. 108-0219 [12] SLEEVE  
26. 225-3099 [2] GASKET-CYLINDER HEAD  
27. 2N-7174 [12] GASKET  
28. 359-1439 [48] SEAL AS-WATER  
30. 033-6027 [2] SEAL-O-RING  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25100064
 

250-3410: CYLINDER HEAD GP

250-3410 CYLINDER HEAD GP
S/N 4CR1990-UP
i02084162 SEBP2510
2503410 CYLINDER HEAD GP Parts scheme 2503410 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-1887 Y [2] CYLINDER HEAD GP  
2. 141-6607 [2] MANIFOLD (HEUI FLUID)  
3. 106-1792 [24] STUD-TAPERLOCK (3/8-16X4-IN)  
4. 1D-4541 [12] BOLT (5/16-18X3-IN)  
5. 5P-7684 [4] PLUG  
6. 108-5806 [4] SEAL-O-RING  
7. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
8. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 9S-8752 [26] NUT-FULL (3/8-16-THD)  
10. 108-5803 [2] SEAL-O-RING  
11. 9S-8006 [2] PLUG (7/8-14-THD)  
12. 1N-5999 [1] PLUG-O-RING  
13. 167-1709 Y [1] SENSOR GP-PRESSURE (INJECTION ACTUATION OIL)  
14. 110-1627 [4] PLATE  
15. 7W-3447 [14] SPACER (10.2X19.05X10.2-MM THK)  
16. 194-6724 Y [1] SENSOR GP-PRESSURE (TURBOCHARGER OUTLET)  
17. 9X-0263 [1] ADAPTER  
18. 6V-5048 [1] SEAL-O-RING  
19. 9S-8004 [4] PLUG (9/16-18-THD)  
20. 6V-5049 [4] SEAL-O-RING  
21. 107-7322 [40] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
  236-0486 [1] BOLT-12 POINT HEAD (3/4-16X10-IN)  
22. 061-8561 [12] SEAL-O-RING  
23. 6V-5266 [12] SEAL-O-RING  
24. 107-9570 [24] SEAL-O-RING  
25. 108-0219 [12] SLEEVE  
26. 225-3099 [2] GASKET-CYLINDER HEAD  
27. 2N-7174 [12] GASKET  
28. 359-1439 [48] SEAL AS-WATER  
30. 033-6027 [2] SEAL-O-RING  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25100065
 

250-9978: CYLINDER HEAD GP

250-9978 CYLINDER HEAD GP
S/N 4CR4000-UP
i02084501 SEBP2510
2509978 CYLINDER HEAD GP Parts scheme 2509978 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-1887 Y [2] CYLINDER HEAD GP  
2. 141-6607 [2] MANIFOLD (HEUI FLUID)  
3. 106-1792 [24] STUD-TAPERLOCK (3/8-16X4-IN)  
4. 1D-4541 [12] BOLT (5/16-18X3-IN)  
5. 5P-7684 [4] PLUG  
6. 108-5806 [4] SEAL-O-RING  
7. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
8. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 9S-8752 [26] NUT-FULL (3/8-16-THD)  
10. 108-5803 [2] SEAL-O-RING  
11. 9S-8006 [2] PLUG (7/8-14-THD)  
12. 1N-5999 [1] PLUG-O-RING  
13. 167-1709 Y [1] SENSOR GP-PRESSURE (INJECTION ACTUATION OIL)  
14. 110-1627 [2] PLATE  
15. 7W-3447 [20] SPACER (10.2X19.05X10.2-MM THK)  
16. 194-6724 Y [1] SENSOR GP-PRESSURE (TURBO OUTLET)  
17. 9X-0263 [1] ADAPTER  
18. 6V-5048 [1] SEAL-O-RING  
19. 9S-8004 [4] PLUG (9/16-18-THD)  
20. 6V-5049 [4] SEAL-O-RING  
21. 107-7322 [40] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
  236-0486 [1] BOLT-12 POINT HEAD (3/4-16X10-IN)  
22. 061-8561 [12] SEAL-O-RING  
23. 6V-5266 [12] SEAL-O-RING  
24. 107-9570 [24] SEAL-O-RING  
25. 108-0219 [12] SLEEVE  
26. 225-3099 [2] GASKET-CYLINDER HEAD  
27. 2N-7174 [12] GASKET  
28. 359-1439 [48] SEAL AS-WATER  
29. 033-6027 [2] SEAL-O-RING  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25100066
 

103-8845: DAMPER & PULLEY GP

103-8845 DAMPER & PULLEY GP
FOR USE WITH DITTA ENGINES
AN ATTACHMENT
i00471171 SEBP2510
1038845 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7787 [1] ADAPTER-DAMPER  
2. 167-8130 [1] DAMPER AS  
3. 3N-9540 [2] PULLEY (1-GROOVE)(1 GROOVE)  
4. 2D-8155 [12] STUD-TAPERLOCK (1/2-13X3.58-IN)  
5. 1F-7958 [12] NUT-FULL (1/2-13-THD)  
6. 5P-9266 [12] BOLT-12 POINT HEAD (5/8-18X5.25-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25100067
 

5N-5322: DAMPER & PULLEY GP

5N-5322 DAMPER & PULLEY GP
CANNOT BE USED WITH FRONT CRANKSHAFT MOUNTED ATTACHMENT
AN ATTACHMENT
i00385434 SEBP2510
5N5322 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-4399 [1] PULLEY (2-GROOVE)  
2. 167-8130 [1] DAMPER AS  
3. 6N-4400 [1] ADAPTER  
4. 0S-1587 [12] BOLT (1/2-13X1.75-IN)  
5. 1B-7538 [9] BOLT (5/8-18X5.75-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25100068
 

7W-2365: DAMPER & PULLEY GP

7W-2365 DAMPER & PULLEY GP
REQUIRED WITH GENERATORS RATED 50 HERTZ AT 1500 RPM
AN ATTACHMENT
i00431857 SEBP2510
7W2365 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-9266 [12] BOLT-12 POINT HEAD (5/8-18X5.25-IN)  
2. 3N-9540 [1] PULLEY (1-GROOVE)  
3. 6N-7785 [1] PULLEY (5-GROOVE)  
    -OR-
  6N-7786 A [1] PULLEY (6-GROOVE)  
4. 2D-8155 [12] STUD-TAPERLOCK (1/2-13X3.58-IN)  
  1F-7958 [12] NUT-FULL (1/2-13-THD)  
5. 167-8131 [1] DAMPER AS  
6. 6N-7787 [1] ADAPTER-DAMPER  
  A   NOT PART OF THIS GROUP
 

#SEBP25100069
 

8N-5572: DAMPER & PULLEY GP

8N-5572 DAMPER & PULLEY GP
FOR USE WITH 1000 HP CSFS MARINE ENGINES
i00431413 SEBP2510
8N5572 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3412E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7787 [1] ADAPTER-DAMPER  
2. 167-8130 [1] DAMPER AS  
3. 3N-9540 [1] PULLEY (1-GROOVE)  
4. 2D-8155 [12] STUD-TAPERLOCK (1/2-13X3.58-IN)  
5. 1F-7958 [12] NUT-FULL (1/2-13-THD)  
6. 5P-9266 [12] BOLT-12 POINT HEAD (5/8-18X5.25-IN)  
7. 6N-7785 [1] PULLEY (5-GROOVE)  
    -OR-
  6N-7786 A [1] PULLEY (6-GROOVE)  
  A   NOT PART OF THIS GROUP
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Engine News
Remanufactured 3412 Crankshafts {1100}
2000/01/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefixes 1WW, BFF, DLA, BFD, BKY, BLR, ECP, BGE, BKS, BLJ, B1A, BNF and 2MZ {1101, 7754}
2006/04/10
Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Commercial Engines {1100}
2014/10/10
A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
3408E and 3412E Industrial Engines
Engine Valve Lash - Inspect/Adjust
3408E and 3412E Industrial Engines
Special Instruction
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Exhaust Gas Leakage At Cylinder Head To Manifold Connection
Exhaust Gas Leakage At Cylinder Head To Manifold Connection
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Specifications
Cylinder Head Valves
3408E and 3412E Industrial Engines
Cylinder Head
3408E and 3412E Industrial Engines
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
3408E and 3412E Industrial Engines
Cylinder Head - Inspect
3408E and 3412E Industrial Engines
Disassembly and Assembly
Cylinder Heads
3408E & 3412E INDUSTRIAL ENGINES
Inlet & Exhaust Valves
3408E & 3412E INDUSTRIAL ENGINES
Valve Guides
3408E & 3412E INDUSTRIAL ENGINES
Valve Seat Inserts
3408E & 3412E INDUSTRIAL ENGINES
Service Magazine
A New Water Seal Assembly Is Now Used on All 3408 and 3412 Engines {1100, 7555}
2013/05/10

Caterpillar Parts SIS Catalog 3412E :

CYLINDER HEAD GP
108-1887 CYLINDER HEAD GP
CYLINDER HEAD GP
108-1887 CYLINDER HEAD GP
CYLINDER HEAD GP
108-1552 CYLINDER HEAD GP
CYLINDER HEAD GP
108-1552 CYLINDER HEAD GP
CYLINDER HEAD AS
7W-2243 CYLINDER HEAD AS
CYLINDER HEAD AS
192-1322 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0047 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0046 CYLINDER HEAD AS
CYLINDER HEAD GP
129-1674 CYLINDER HEAD GP
CYLINDER HEAD GP
129-1674 CYLINDER HEAD GP
CYLINDER HEAD GP
129-1674 CYLINDER HEAD GP
CYLINDER HEAD GP
250-3410 CYLINDER HEAD GP
CYLINDER HEAD GP
250-9978 CYLINDER HEAD GP
DAMPER & PULLEY GP
103-8845 DAMPER & PULLEY GP
DAMPER & PULLEY GP
5N-5322 DAMPER & PULLEY GP
DAMPER & PULLEY GP
7W-2365 DAMPER & PULLEY GP

Truck sale:

Caterpillar G3412EP, Construction
110,000 
Caterpillar G3412EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
 
Call 
1983 CAT 3412E

Empire Machinery
Eloy, Arizona
2006 CAT 3412E
USD $19,500 
2006 CAT 3412E

React Power Solutions
Houston, Texas
2009 CAT 3412E
USD $47,500 
2009 CAT 3412E

React Power Solutions
Houston, Texas
2009 CAT 3412E
USD $47,500 
2009 CAT 3412E

React Power Solutions
Houston, Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.