FUEL SYSTEM
GOVERNOR GPFILTER GP-FUEL
CONTROL GP-GOVERNOR
LINES GP-FUEL RATIO CONTROL
CONTROL GP-FUEL
BASIC ENGINE
DRIVE GP-FANBELT TIGHTENER GP
FUEL SYSTEM
GOVERNOR GP
#SEBP25130050
7E-8794: DRIVE GP-GOV & TRANSFER PUMP
7E8794 DRIVE GP-GOVERNOR & TRANSFER PUMP
Part Of 6I4267 Governor-Unit Injector
Part Of 6I4267 Governor-Unit Injector
For full view, you need register
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6L-8598 | [2] | RING-RETAINING | |
| 2. | [1] | SPRING-TORSION | ||
| 3. | 4P-3538 | [1] | SHAFT-THROTTLE | |
| 4. | 6V-5213 M | [2] | BOLT-SOCKET HEAD | |
| 5. | 7E-3944 | [1] | SLEEVE | |
| 6. | 4D-9986 | [2] | SEAL-O-RING | |
| 7. | 4P-3953 | [1] | PISTON AS | |
| 8. | 7E-0156 | [1] | FITTING-INLET | |
| 9. | 4P-4224 | [1] | COVER-TRANSFER PUMP | |
| 10. | 7C-5294 | [1] | SPRING | |
| 11. | 8C-6364 M | [3] | BOLT-SOCKET HEAD | |
| 12. | 7E-9898 | [1] | CONNECTOR-ORIFICE | |
| 13. | 3J-1907 | [2] | SEAL | |
| 14. | 7W-7383 | [2] | VALVE AS-CHECK | |
| 15. | 7E-3943 | [1] | LEVER-CONTROL | |
| 16. | 9Y-9846 M | [1] | SCREW-LOCATING | |
| 17. | 4P-5612 | [1] | HOUSING AS-FRONT | |
| 18. | 7S-6798 | [1] | SEAL-LIP TYPE | |
| 19. | 7S-5005 | [2] | DOWEL | |
| 20. | 2K-5830 | [2] | BEARING-NEEDLE | |
| 21. | 9Y-0208 | [1] | BUSHING | |
| 22. | 9Y-3107 | [1] | BOLT | |
| 23. | 7X-4805 | [1] | SEAL-O-RING | |
| 24. | 7W-9638 | [1] | SHAFT AS-SHUT-OFF | |
| 25. | 7W-4328 | [1] | SPRING-SHUT-OFF | |
| 26. | 7W-9402 | [1] | LEVER-SHUT-OFF | |
| 27. | 7W-9403 | [1] | LEVER-SHUT-OFF | |
| 28. | 8C-5899 | [1] | PIN-SPRING | |
| 29. | 8T-5433 M | [4] | BOLT-SOCKET HEAD | |
| 30. | 7W-5615 | [1] | SLEEVE AS-PUMP | |
| M | METRIC PART | |||
#SEBP25130051
7W-4812: FASTENER GP-GOVERNOR
7W4812 FASTENER GP-GOVERNOR
For full view, you need register
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-3872 JC | [1] | SLEEVE | |
| 2. | 9M-1974 | [3] | WASHER | |
| 3. | 6V-5218 M | [3] | BOLT | |
| 4. | 9Y-5295 C | [1] | TUBE-GOVERNOR CONNECTION | |
| 5. | 6F-6673 | [1] | SEAL-O-RING | |
| 6. | 7C-3839 | [1] | CLIP-SPRING | |
| 7. | 7E-0844 | [1] | SEAL | |
| 8. | 1T-1068 | [1] | SEAL-O-RING | |
| J-INSTALL SLEEVE | ||||
| IN FRONT HOUSING | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP25130052
7W-8434: LINES GP-GOVERNOR OIL
7W8434 LINES GP-GOVERNOR OIL
For full view, you need register
#SEBP25130053
5R-9001: FILTER GP-FUEL
5R9001 FILTER GP-FUEL
For full view, you need register
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SIS#SEBP25130054
7C-9651: LINES GP-FUEL FILTER
7C9651 LINES GP-FUEL FILTER
For full view, you need register
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8M-9024 | [2] | WASHER-HARD | |
| 2. | 6V-6317 M | [2] | BOLT | |
| 3. | 6V-8724 | [2] | ELBOW | |
| 4. | 3J-1907 C | [5] | SEAL 11.9MM (.469IN) ID | |
| 5. | 5P-7813 | [1] | SEAL-O-RING | |
| 6. | 6V-8397 | [4] | SEAL-O-RING 9.25MM (.364IN) ID | |
| 7. | 7E-6288 C | [1] | TUBE AS | |
| 8. | 7W-0183 | [1] | TUBE AS | |
| 9. | 9S-1350 | [1] | CLIP | |
| 8T-4200 M | [1] | BOLT | ||
| 8T-4224 | [1] | WASHER-HARD | ||
| 10. | 3N-3252 | [1] | SPRING | |
| 11. | 8T-0151 | [1] | ADAPTER-SPECIAL | |
| 12. | 7E-5189 | [1] | VALVE-REGULATING | |
| 13. | 7E-5190 | [1] | TUBE AS | |
| 14. | 5F-7054 | [1] | SEAL-O-RING 18.6MM(.734IN) ID | |
| 15. | 8T-7547 M | [2] | BOLT | |
| 16. | 7X-2459 | [1] | TEE-SPECIAL | |
| 9S-4191 | [1] | PLUG-O-RING | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP25130055
7E-9429: CONTROL GP-GOVERNOR
7E9429 CONTROL GP-GOVERNOR
For full view, you need register
#SEBP25130056
4P-1518: LINES GP-AIR FUEL RATIO CONT
4P1518 LINES GP-AIR FUEL RATIO CONTROL
For full view, you need register
#SEBP25130057
105-1695: CONTROL GP-FUEL INJECTION
1051695 CONTROL GP-FUEL INJECTION
For full view, you need register
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SIS#SEBP25130058
4R-9917: DRIVE GP-FAN (BELT)
4R9917 DRIVE GP-FAN (BELT) 1.23:1
For full view, you need register
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7E-1306 | [1] | SHAFT-FAN | |
| 2. | 4P-3533 | [1] | PULLEY-FAN | |
| 3. | 7E-1308 | [1] | HOUSING AS-BEARING | |
| 0L-1024 | [1] | PLUG-CUP | ||
| 4. | 7E-1307 | [1] | RETAINER | |
| 5. | 7E-1312 | [1] | SUPPORT-BEARING HOUSING | |
| 6. | 7E-1313 | [1] | BRACKET | |
| 7. | 3B-8489 | [1] | FITTING-GREASE | |
| 8. | 8T-4121 | [7] | WASHER | |
| 9. | 5S-7264 | [1] | WASHER-RETAINING | |
| 10. | 8T-4224 | [4] | WASHER-HARD | |
| 11. | 8T-4195 M | [1] | BOLT | |
| 12. | 8T-4185 M | [6] | BOLT | |
| 13. | 8T-4197 M | [2] | BOLT | |
| 14. | 8T-6869 M | [4] | BOLT | |
| 15. | 8T-4908 M | [4] | BOLT | |
| 16. | 6Y-4116 | [1] | BEARING AS-ROLLER | |
| 17. | 3P-0815 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
#SEBP25130059
119-8305: TENSIONER GP-BELT
1198305 TENSIONER GP-BELT
For full view, you need register
Parts for your 3116 TRUCK ENGINE:
CATERPILLAR SISInformation:
FUEL SYSTEM
GOVERNOR GP
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Service Letter-Australia
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Service Letter-CFEL
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Service Letter-CSARL
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Service Letter-Americas
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Service Letter-Brazil
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Truck/Ag/Marine
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Service Letter-Asia
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Information Release Memo
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
