FUEL SYSTEM
PUMP GP-FUEL INJECTIONTANK GP-FUEL
TORQUE CONTROL GP
FILTER GP-FUEL
VALVE GP-SOLENOID
ELECTRICAL AND STARTING SYSTEM
ALARM GPALTERNATOR GP-CHARGING
BATTERY GP
FUEL SYSTEM
PUMP GP-FUEL INJECTION
#SEBP25170210
134-9405: PUMP GP-UNIT INJECTOR HYD
134-9405 PUMP GP-UNIT INJECTOR HYD
S/N 99C1101-1828
PART OF 126-7292 PUMP & MTG GP-UNIT INJ HYD
ALSO AN ATTACHMENT
S/N 99C1101-1828
PART OF 126-7292 PUMP & MTG GP-UNIT INJ HYD
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 107-0677 Y | [1] | VALVE GP-SOLENOID | |
| (HYDRAULIC UNIT INJECTOR VARIABLE PRESSURE CONTROL) | ||||
| 2. | 111-8863 | [1] | PUMP GP-FUEL TRANSFER | |
| 3. | 134-9404 C | [1] | PUMP GP-UNIT INJECTOR HYD | |
| 4. | 0S-1617 | [4] | BOLT (5/16-18X0.75-IN) | |
| 5. | 9S-8001 | [2] | PLUG | |
| 6. | 9S-8004 | [4] | PLUG (9/16-18-THD) | |
| 7. | 9S-8002 | [3] | PLUG (7/16-20-THD) | |
| 8. | 9S-8003 | [1] | PLUG (1/2-20-THD) | |
| 9. | 9S-4180 | [2] | PLUG | |
| 10. | 9S-8007 | [1] | PLUG | |
| 11. | 138-4309 | [2] | FITTING | |
| 12. | 138-4311 | [2] | SPRING | |
| 13. | 138-4313 | [2] | VALVE (ORIFICE) | |
| 117-1620 F | [1] | COUPLING | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 138-6256 Y | [1] | KIT-SEAL (UNIT INJECTOR HYDRAULIC PUMP) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25170211
144-0835: PUMP GP-UNIT INJECTOR HYD
144-0835 PUMP GP-UNIT INJECTOR HYD
S/N 99C1829-1926
PART OF 126-7292 PUMP & MTG GP-UNIT INJ HYD
ALSO AN ATTACHMENT
S/N 99C1829-1926
PART OF 126-7292 PUMP & MTG GP-UNIT INJ HYD
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 107-0677 Y | [1] | VALVE GP-SOLENOID | |
| (HYDRAULIC UNIT INJECTOR VARIABLE PRESSURE CONTROL) | ||||
| 2. | 161-8627 B | [1] | KIT-PLUG (UNIT INJECTOR HYDRAULIC PUMP) | |
| (INCLUDES PLUGS & SEALS) | ||||
| (SELECT APPROPRIATE PLUG FROM KIT) | ||||
| 3. | 9S-4180 | [2] | PLUG (5/16-24 THD) | |
| 4. | 9S-8001 | [2] | PLUG (5/16-24 THD) | |
| 5. | 9S-8002 | [3] | PLUG (7/16-20-THD)(7/16-20 THD) | |
| 6. | 9S-8004 | [4] | PLUG (9/16-18-THD)(9/16-18 THD) | |
| 7. | 9S-8007 | [1] | PLUG | |
| 8. | 138-4309 | [2] | FITTING | |
| 9. | 138-4311 | [2] | SPRING | |
| 10. | 138-4313 | [2] | VALVE (ORIFICE) | |
| 11. | 144-0837 J | [1] | PUMP GP-UNIT INJECTOR HYD | |
| 12. | 149-1950 | [1] | PUMP GP-FUEL TRANSFER | |
| 13. | 0S-1617 | [4] | BOLT (5/16-18X0.75-IN) | |
| 117-1620 F | [1] | COUPLING (FUEL TRANSFER) | ||
| 154-6734 F | [1] | BEARING (REAR) | ||
| 6V-8676 F | [1] | SEAL-O-RING (FUEL TRANSFER) | ||
| 9X-7680 F | [3] | SEAL-O-RING (COMPENSATOR TO ADAPTER) | ||
| 135-2652 F | [1] | SEAL-O-RING (COMPENSATOR TO ADAPTER) | ||
| F | [4] | BOLT-SOCKET HEAD (10-24X3.25-IN)(COMPENSATOR) | ||
| 165-6881 F | [1] | SEAL-LIP TYPE | ||
| 174-8943 F | [1] | SLEEVE (COMPENSATOR) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 154-6735 | [1] | KIT-BEARING (YOKE)(UNIT INJECTOR HYD PUMP) | ||
| (INCLUDES A SET OF TWO YOKE BEARINGS) | ||||
| 154-6732 J | [1] | KIT-FUEL INJECTION PUMP (REBUILD)(UNIT INJ HYD PUMP) | ||
| (INCLUDES YOKE, SHAFT, CONTROL PISTON, SEAL KIT & FRONT BEARING) | ||||
| 138-6256 Y | [1] | KIT-SEAL (UNIT INJECTOR HYDRAULIC PUMP) | ||
| 166-5985 | [1] | KIT-COMPENSATOR (UNIT INJECTOR HYDRAULIC PUMP) | ||
| (INCLUDES COMPENSATOR SUB ASSEMBLY, SEAL-O-RINGS, SLEEVE, WIRE SEAL, LOCK WIRE, & COMPENSATOR PLUGS) | ||||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| J | KIT MARKED J AVAILABLE FOR PART MARKED J | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25170212
8E-9858: TANK GP-FUEL
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 124-6124 | [1] | TANK AS-FUEL | |
| 2. | 9P-7121 | [1] | STRAINER-FUEL (FUEL TANK) | |
| 3. | 7X-7700 J | [1] | CAP AS-FUEL (LOCKABLE, VENTED) | |
| 9X-8600 | [1] | SEAL-O-RING | ||
| 9X-2206 | [1] | ADAPTER AS-FUEL | ||
| 4. | 5P-8502 | [1] | PADLOCK GP | |
| 5P-8500 A | [1] | KEY | ||
| 8Y-6364 A | [1] | SLEEVE | ||
| 5. | 7X-0369 | [4] | BOLT (3/4-10X3.25-IN) | |
| 5P-6652 | [4] | WASHER (20X44.5X6-MM THK) | ||
| 6. | 4H-9027 | [1] | PLUG-PIPE | |
| 7. | 2G-0493 | [4] | WASHER-RETAINING (20X82.55X11-MM THK) | |
| 8. | 6T-1698 | [8] | MOUNT | |
| 9. | 3J-2903 | [1] | COVER | |
| 10. | 5P-2228 | [4] | BOLT (1/2-13X1-IN) | |
| 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 11. | 4J-0527 | [4] | SEAL-O-RING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 9X-2205 J | [1] | KIT-CAP FILTER (FUEL TANK) | ||
| (INCLS GASKETS,SCREW,VALVE,FILTER AS) | ||||
| A | NOT PART OF THIS GROUP | |||
| J | ||||
#SEBP25170213
9N-5071: TORQUE CONTROL GP
9N-5071 TORQUE CONTROL GP
S/N 48W40540-41131
PART OF 104-7032 PUMP GP-GOV, FUEL INJ & TFR
AN ATTACHMENT
S/N 48W40540-41131
PART OF 104-7032 PUMP GP-GOV, FUEL INJ & TFR
AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-6452 | [1] | INSULATOR | |
| 2. | 1P-9958 | [1] | INSULATOR | |
| 3. | 2S-7391 | [1] | BAR-STOP | |
| 4. | 3S-0602 | [1] | RETAINER-SPRING | |
| 5. | 4N-4218 | [1] | CONTACT | |
| 6. | 7N-4012 | [1] | SPACER (0.305-MM THK) | |
| 7. | 7N-4330 | [1] | SPACER (0.75-MM THK) | |
| 8. | 8M-9062 | [1] | RETAINER-SPRING (3.05-MM THK) | |
| 9. | 9L-3625 | [1] | SPRING-TORQUE | |
| 10. | 9L-9347 | [1] | SHIM (0.510MM THK) | |
| 11. | 6L-5897 | [2] | BOLT (1/4-20X0.875-IN) |
#SEBP25170214
102-7535: VALVE GP-CHECK
102-7535 VALVE GP-CHECK
S/N 99C1-1926
PART OF 130-8909 LINES GP-FUEL FILTER
ALSO AN ATTACHMENT
S/N 99C1-1926
PART OF 130-8909 LINES GP-FUEL FILTER
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP25170215
107-0677: VALVE GP-SOLENOID
107-0677 VALVE GP-SOLENOID
S/N 99C1-1926
PART OF 134-1598, 134-9405, 144-0835 PUMP GP-UNIT INJECTOR HYD
ALSO AN ATTACHMENT
S/N 99C1-1926
PART OF 134-1598, 134-9405, 144-0835 PUMP GP-UNIT INJECTOR HYD
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 033-6039 J | [1] | SEAL-O-RING | |
| 2. | 123-3132 J | [1] | RING-BACKUP | |
| 3. | 9X-5535 J | [1] | SPACER-SPECIAL | |
| 4. | 8C-6711 J | [1] | NUT-RETAINER (1/2-20-THD) | |
| 5. | 033-6028 J | [1] | SEAL-O-RING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 9X-1484 J | [1] | KIT-SEAL (SOLENOID VALVE) | ||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
#SEBP25170216
3E-6328: ALARM GP
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP25170217
132-2130: ALTERNATOR GP-CHARGING
132-2130 ALTERNATOR GP-CHARGING
S/N 8BL830-1052
PART OF 127-6979 INSTALLATION AR-ENGINE
S/N 8BL830-1052
PART OF 127-6979 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 177-9953 Y | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 80-AMPERE) | |
| 2. | 8T-8919 | [2] | BOLT (1/2-13X1.75-IN) | |
| 3. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 4. | 115-2151 | [1] | BRACKET-ALTERNATOR | |
| 5. | 8S-5383 | [1] | BLOCK | |
| 6. | 8T-4835 | [1] | BOLT (1/2-13X2-IN) | |
| 7. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 8. | 6V-8181 | [2] | NUT-FULL (5/8-18-THD) | |
| 9. | 4L-6454 | [2] | BOLT (3/8-16X1-IN) | |
| 10. | 6W-8509 | [1] | PUSHROD | |
| 11. | 7X-0591 | [2] | WASHER-HARD (17X29X3-MM THK) | |
| 12. | 7X-0346 | [1] | BOLT (5/8-11X2-IN) | |
| 13. | 7X-0288 | [3] | BOLT (3/8-16X1.625-IN) | |
| 14. | 7X-0294 | [1] | BOLT (3/8-16X5-IN) | |
| 15. | 4N-8225 | [1] | PULLEY-ALTERNATOR (1-GROOVE) | |
| 16. | 6N-6657 | [1] | V-BELT GP (ALTERNATOR) | |
| 17. | 7C-5287 | [1] | CABLE AS | |
| 18. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 19. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 20. | 188-2034 | [1] | PAN AS-DRIP | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 7T-1099 | [2] | LINK | ||
| 21. | 9H-1024 | [1] | WASHER-HARD (17X30X6-MM THK) | |
| 22. | 131-8520 | [1] | PLATE | |
| 23. | 2K-5804 | [1] | ROD END | |
| 24. | 9S-1354 | [1] | NUT (5/8-18-THD) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25170218
177-9953: ALTERNATOR GP-CHARGING
177-9953 ALTERNATOR GP-CHARGING
S/N 8BL830-1052
24-VOLT, 80-AMPERE
PART OF 132-2130 ALTERNATOR GP-CHARGING
S/N 8BL830-1052
24-VOLT, 80-AMPERE
PART OF 132-2130 ALTERNATOR GP-CHARGING
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 185-2653 | [1] | FRAME | |
| 2. | 5S-7349 | [1] | BOLT (1/4-20X0.5-IN) | |
| 3. | 185-2639 | [1] | FAN AS (ALTERNATOR) | |
| 4. | 1H-3244 | [1] | LOCKWASHER | |
| 5. | 185-2645 | [1] | FRAME | |
| 6. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 7. | 5P-8247 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 8. | 228-9657 | [1] | COVER AS | |
| 9. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 10. | 185-2647 | [1] | GROMMET | |
| 11. | 9L-6770 | [1] | CAP-DUST | |
| 12. | 423-2775 | [1] | STATOR AS (24-VOLT, 95-AMPERE)(ALTERNATOR) | |
| 13. | 185-2638 | [2] | COLLAR | |
| 14. | 185-2654 | [1] | PLATE | |
| 15. | 185-2650 | [1] | ROTOR AS (ALTERNATOR) | |
| 16. | 185-2644 | [1] | COIL AS | |
| 17. | 185-2648 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 18. | 6V-8189 J | [1] | NUT (5/16-18-THD) | |
| 19. | 8T-4224 J | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 3F-9556 J | [1] | LOCKWASHER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 199-7891 J | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES INSULATORS, WASHERS, NUT & STEP NUT) | ||||
| 185-2655 | [1] | KIT-BEARING (ALTERNATOR) | ||
| (INCLUDES 3 BEARINGS) | ||||
| 199-8436 | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES HOLDER AS, PLATE, INSULATOR, PIN, BOLT, GROMMET & NUT) | ||||
| 185-2658 | [1] | KIT-HARDWARE (ALTERNATOR AIR) | ||
| (INCLUDES BOLTS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
#SEBP25170219
101-7747: BATTERY & WIRING GP
101-7747 BATTERY & WIRING GP
S/N 8BL830-1052
PART OF 120-9723 CONVERSION AR-ENGINE
AN ATTACHMENT
S/N 8BL830-1052
PART OF 120-9723 CONVERSION AR-ENGINE
AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-9445 | [1] | PLATE AS | |
| 9D-4439 | [2] | STUD-WELD (3/8-16X1-IN) | ||
| 2. | 7T-0969 | [1] | HORN AS (24-VOLT, LOW TONE) | |
| 8C-7581 M | [2] | SCREW-MACHINE (M4X0.7X8-MM) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 3. | 7T-0970 | [1] | HORN AS (24-VOLT, HIGH TONE) | |
| 8C-7581 M | [2] | SCREW-MACHINE (M4X0.7X8-MM) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 4. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 5. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 6. | 5S-7382 | [1] | BOLT (3/8-16X1.375-IN) | |
| 7. | 9X-6772 B | [17] | STRAP-CABLE | |
| 8. | 9U-9045 | [1] | HARNESS AS-FRONT (RADIATOR GUARD) | |
| 9. | 4P-8134 | [2] | CLIP (LADDER) | |
| 10. | 9X-0261 | [1] | ADAPTER | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 11. | 107-3952 Y | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
| 12. | 3J-1907 | [3] | SEAL-O-RING | |
| 13. | 8S-0023 | [1] | CLIP (SLOT) | |
| 8S-0024 | [1] | CLIP (TAB) | ||
| 14. | 4P-7581 C | [6] | CLIP (LADDER) | |
| 15. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 16. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
| 17. | 3T-9660 | [1] | FITTING-O-RING | |
| 2M-9780 | [1] | SEAL-O-RING | ||
| 18. | 8C-6561 | [2] | BOLT (5/16-18X1.375-IN) | |
| 19. | 3E-6425 | [1] | SWITCH AS-TEMPERATURE (ETHER AID) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 20. | 9U-9040 | [1] | HARNESS AS-ENGINE | |
| 21. | 9X-3271 | [1] | ADAPTER (1/2-14-THD) | |
| 22. | 3B-7255 | [1] | BUSHING-REDUCER | |
| 23. | 3E-8700 Y | [1] | SENSOR GP-TEMPERATURE (COOLANT) | |
| 24. | 8C-3121 | [1] | BOLT (5/16-18X1.5-IN) | |
| 25. | 5P-4116 | [3] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 26. | 9X-6772 B | [46] | STRAP-CABLE | |
| 27. | 3T-3047 | [4] | CLIP AS | |
| 28. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 6V-0852 | [1] | CAP-DUST | ||
| 6V-0484 | [1] | ELBOW | ||
| 29. | 3J-1907 | [4] | SEAL-O-RING | |
| 30. | 061-7661 | [1] | CABLE AS | |
| 5P-0747 E | CABLE (00-GA, BLACK)(42CM) | |||
| 1S-7251 | [2] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 31. | 7B-1251 | [4] | GROMMET | |
| 32. | 9X-9730 | [2] | BATTERY GP (12-VOLT) | |
| (EACH INCLUDES) | ||||
| 7N-0060 | [6] | VENT AS | ||
| 33. | 4J-8265 | [2] | NUT (3/8-16-THD) | |
| 34. | 5P-1075 | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 35. | 8E-4260 | [1] | HOLD-DOWN AS | |
| 36. | 8V-0622 | [1] | CABLE AS-BATTERY | |
| 5P-0761 E | CABLE (00-GA, RED)(14CM) | |||
| 8C-5917 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 8T-9757 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| (EACH TERMINAL AS INCLUDES) | ||||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [2] | NUT (5/16-18-THD) | ||
| 9G-0003 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 9G-0004 | [1] | COVER AS-TERMINAL (RED) | ||
| 37. | 8T-2501 | [4] | BOLT (3/8-16X2-IN) | |
| 38. | 5S-7379 | [1] | BOLT (3/8-16X0.875-IN) | |
| 39. | 4P-7581 | [2] | CLIP (LADDER) | |
| 40. | 3T-3047 | [1] | CLIP AS | |
| 41. | 9U-9044 | [1] | HARNESS AS (FENDER) | |
| 42. | 7X-0291 | [2] | BOLT (3/8-16X3.75-IN) | |
| 43. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 44. | 123-6449 | [1] | ALARM GP | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-5677 D | WIRE (18-GA, BLACK)(.6M) | |||
| 45. | 1H-7459 | [2] | GROMMET | |
| 46. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 47. | 9X-7781 Y | [1] | SWITCH GP-BYPASS (POWER TRAIN OIL FILTER) | |
| 48. | 3E-9350 | [1] | SWITCH AS-TEMPERATURE (POWER TRAIN OIL FILTER BYPASS) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 49. | 7G-1060 | [1] | STRAP AS-GROUND | |
| 50. | 3E-8700 Y | [1] | SENSOR GP-TEMPERATURE (HYDRAULIC OIL) | |
| 51. | 120-8189 | [1] | HARNESS AS (FENDER, RH) | |
| 52. | 3E-8700 Y | [1] | SENSOR GP-TEMPERATURE (POWER TRAIN OIL) | |
| 53. | 1A-2029 | [1] | BOLT (3/8-16X1.125-IN) | |
| 54. | 4P-8134 | [3] | CLIP (LADDER) | |
| 55. | 4P-7429 | [3] | CLIP (LADDER) | |
| 56. | 9U-9013 | [1] | HARNESS AS-SENSOR (TORQUE CONVERTER OIL) | |
| 57. | 4P-7428 | [2] | CLIP (LADDER) | |
| 58. | 3E-7753 | [1] | FLOAT AS (FUEL LEVEL SENSOR) | |
| 59. | 111-4402 | [1] | FILTER-FOAM (FUEL LEVEL SENSOR) | |
| 60. | 124-9325 Y | [1] | SENSOR GP-FUEL LEVEL | |
| 6V-5051 | [1] | SEAL-O-RING | ||
| 61. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 62. | 125-1017 | [1] | HARNESS AS-WIRING (CIRCUIT BREAKER) | |
| 63. | 8T-2502 | [1] | BOLT (3/8-16X1.125-IN) | |
| 64. | 9X-6772 B | [22] | STRAP-CABLE | |
| 65. | 7B-1251 | [2] | GROMMET | |
| 66. | 6V-8801 | [5] | NUT (3/8-16-THD) | |
| 67. | 5P-1075 | [5] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 68. | 7G-1060 | [3] | STRAP AS-GROUND | |
| 69. | 6V-8188 | [4] | NUT (1/2-13-THD) | |
| 70. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 71. | 2N-3476 | [8] | SCREW-MACHINE (6-32X0.75-IN) | |
| 4B-5324 | [16] | WASHER (3.9X9.6X1.2-MM THK) | ||
| 7D-6922 | [8] | LOCKNUT (6-32-THD) | ||
| 72. | 8W-1614 | [1] | CLIP | |
| 73. | 5M-3062 C | [4] | BOLT (3/8-16X0.75-IN) | |
| 74. | 8T-4896 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 75. | 4P-7581 | [8] | CLIP (LADDER) | |
| 76. | 2G-8097 | [1] | GROMMET | |
| 77. | 6Y-6584 | [1] | STRAP AS-GROUND | |
| 78. | 8S-2634 | [1] | COVER AS | |
| 2P-2975 | [2] | SEAL-O-RING | ||
| 79. | 7T-7778 | [1] | RECEPTACLE AS (JUMP START) | |
| 1S-4915 | [2] | LINER (CONDUIT) | ||
| 1S-7251 | [2] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 5P-0695 E | CONDUIT (89CM) | |||
| 5P-0747 E | CABLE (00-GA, BLACK)(122CM) | |||
| 5P-0761 E | CABLE (00-GA, RED)(115CM) | |||
| 8T-2225 BE | TUBE-HEAT SHRINK (25.4-MM DIA) | |||
| 80. | 5S-7379 | [6] | BOLT (3/8-16X0.875-IN) | |
| 81. | 7N-0719 Y | [1] | SWITCH GP-DISCONNECT (BATTERY) | |
| 82. | 8S-4211 | [2] | PLATE | |
| 83. | 9P-1503 | [1] | CABLE AS | |
| 1S-4915 | [2] | LINER (CONDUIT) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 5P-0695 E | CONDUIT (92CM) | |||
| 5P-0747 E | CABLE (00-GA, BLACK)(134CM) | |||
| 7N-5274 | [1] | COVER AS-TERMINAL (BLACK)(BATTERY TERMINAL) | ||
| 8T-2225 BE | TUBE-HEAT SHRINK (25.4-MM DIA) | |||
| 9G-8909 | [1] | COVER-TERMINAL (BLACK)(RING TERMINAL) | ||
| 3S-6050 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 84. | 7N-1277 | [1] | BRACKET AS | |
| 85. | 9G-8661 | [1] | SPACER (10X16X20-MM THK) | |
| 86. | 9W-9472 | [1] | CABLE AS | |
| 1S-4915 | [2] | LINER (CONDUIT) | ||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 5P-0695 E | CONDUIT (121CM) | |||
| 5P-0761 E | CABLE (00-GA, RED)(152CM) | |||
| 8N-0869 | [1] | COVER-TERMINAL (RED)(RING TERMINAL) | ||
| 8N-1725 | [1] | COVER AS-TERMINAL (RED)(BATTERY TERMINAL) | ||
| 8T-2225 BE | TUBE-HEAT SHRINK (25.4-MM DIA) | |||
| 3S-6049 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 87. | 4L-9337 | [1] | BOLT (3/8-16X1.5-IN) | |
| 88. | 9W-2938 | [1] | COVER AS | |
| 4D-6716 | [3] | RIVET-POP | ||
| 89. | 5C-6565 | [2] | BOLT (1/2-13X1.125-IN) | |
| 90. | 9W-0742 Y | [1] | BLOCK GP-JUNCTION (BATTERY) | |
| 91. | 7T-7777 | [1] | CABLE AS | |
| 1S-4915 | [2] | LINER (CONDUIT) | ||
| 1S-7251 | [2] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 5P-0695 E | CONDUIT (86CM) | |||
| 5P-0761 E | CABLE (00-GA, RED)(109CM) | |||
| 8N-0869 | [2] | COVER-TERMINAL (RED) | ||
| 8T-2225 BE | TUBE-HEAT SHRINK (25.4-MM DIA) | |||
| 92. | 6T-0463 | [1] | CABLE AS | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 5P-0747 E | CABLE (00-GA, BLACK)(70CM) | |||
| 93. | 120-9036 | [1] | HARNESS AS (MAIN FRAME, LH) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
FUEL SYSTEM
PUMP GP-FUEL INJECTION
Service Magazine
