AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6E-4433 CYLINDER GP-BULLDOZER LIFT S/N 1LP1-UP; 1MP1-UP 120.65MM (4.75 IN.) BORE X 1570MM (61.8 IN.) STROKE PART OF 104-3150, 104-3152 CYLINDER & LINES GP AN ATTACHMENT D9R


HYDRAULIC SYSTEM
CYLINDER GP

TRACK-TYPE TRACTOR D9R TRACK-TYPE TRACTOR 8BL
 D9R Track-Type Tractor Power Shift 8BL00830-01052 (MACHINE) POWERED BY 3408 Engine SEBP2517 D9R 8BL   (1994)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BULLDOZER LIFT
6E-4433 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
6E-4433 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
6E-4433 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-DUAL TILT
4Z-6356 CYLINDER GP-DUAL TILT
CYLINDER GP-DUAL TILT
4Z-6357 CYLINDER GP-DUAL TILT
CYLINDER GP-RIPPER
123-8097 CYLINDER GP-RIPPER
 

#SEBP25170480
 

6E-4433: CYLINDER GP-BULLDOZER LIFT

6E-4433 CYLINDER GP-BULLDOZER LIFT
S/N 1LP1-UP; 1MP1-UP
120.65MM (4.75 IN.) BORE X 1570MM (61.8 IN.) STROKE
PART OF 104-3150, 104-3152 CYLINDER & LINES GP
AN ATTACHMENT
i01114979 SEBP2517
6E4433 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-4493 [1] CYLINDER AS  
1A. 5J-1192 [2] BUSHING  
3. 106-1017 [1] WASHER (36.7X77X6-MM THK)  
4. 131-7823 [1] PISTON AS  
4A. 4T-8588 [1] SEAL AS  
6. 2J-3961 C [1] RING-BACKUP  
7. 164-6403 C [1] HEAD  
8. 6E-4497 [1] ROD AS  
9. 160-6310 [1] CAP-BEARING  
10. 8T-0672 M [4] BOLT (M24X3X160-MM)  
11. 3G-0911 B [28] SHIM (0.8-MM THK)  
12. 7X-0851 M [4] NUT (M24X3-THD)  
13. 312-4247 C [1] SEAL-WIPER  
14. 312-4245 [1] SEAL-U-CUP  
15. 312-4248 C [1] SEAL AS-BUFFER  
16. 8C-9161 [1] RING-WEAR  
17. 131-7184 [1] RING-WEAR  
18. 175-7903 [1] SEAL-O-RING  
19. 173-9682 CM [1] BOLT (M36X4X100-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25170481
 

4Z-6356: CYLINDER GP-DUAL TILT

4Z-6356 CYLINDER GP-DUAL TILT
S/N 8BL830-1052
209.55MM (8.25 IN.) BORE X 188MM (7.4 IN.)STROKE
PART OF 137-7090 CYLINDER & LINES GP-DUAL TILT
AN ATTACHMENT
i00572620 SEBP2517
4Z6356 CYLINDER GP-DUAL TILT Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-8836 [1] CYLINDER AS (RH)  
  109-6784 [4] LUG  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 4J-7376 [1] RING-WEAR  
4. 8T-1793 [1] SEAL AS  
5. 122-9350 [1] PISTON AS  
  1J-8569 [2] INSERT-PISTON  
  2H-3932 [2] SEAL-O-RING  
  3K-8692 [4] RING-BACKUP  
  109-4670 [2] INSERT  
  122-9351 [2] PLUNGER  
6. 9T-1878 [2] WASHER (70.5X120X4.76-MM THK)  
7. 8J-4386 [1] SEAL-O-RING  
8. 3G-3747 [1] RING-BACKUP  
9. 109-6779 [1] HEAD  
10. 6E-4859 [1] ROD AS  
  5J-9454 [1] RING-RETAINING  
  7J-3297 [1] BEARING  
11. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
12. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
13. 8T-0283 M [6] BOLT (M30X3.5X110-MM)  
14. 9X-8399 [6] WASHER (33X56X6-MM THK)  
15. 8T-8382 [1] SEAL-HEAD  
16. 8C-5219 [1] SEAL-LIP TYPE  
17. 9X-7405 [1] SEAL-U-CUP  
18. 8C-9127 [1] SEAL AS  
19. 8T-3329 [1] RING-WEAR  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25170482
 

4Z-6357: CYLINDER GP-DUAL TILT

4Z-6357 CYLINDER GP-DUAL TILT
S/N 8BL830-1052
209.55MM (8.25 IN.)BORE X 188MM (7.4 IN.)STROKE
PART OF 137-7090 CYLINDER & LINES GP-DUAL TILT
AN ATTACHMENT
i00572621 SEBP2517
4Z6357 CYLINDER GP-DUAL TILT Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-8837 [1] CYLINDER AS (LH)  
  109-6784 [4] LUG  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 4J-7376 [1] RING-WEAR  
4. 8T-1793 [1] SEAL AS  
5. 122-9350 [1] PISTON AS  
  1J-8569 [2] INSERT-PISTON  
  2H-3932 [2] SEAL-O-RING  
  3K-8692 [4] RING-BACKUP  
  109-4670 [2] INSERT  
  122-9351 [2] PLUNGER  
6. 9T-1878 [2] WASHER (70.5X120X4.76-MM THK)  
7. 8J-4386 [1] SEAL-O-RING  
8. 3G-3747 [1] RING-BACKUP  
9. 109-6779 [1] HEAD  
10. 6E-4859 [1] ROD AS  
  5J-9454 [1] RING-RETAINING  
  7J-3297 [1] BEARING  
11. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
12. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
13. 8T-0283 M [6] BOLT (M30X3.5X110-MM)  
14. 9X-8399 [6] WASHER (33X56X6-MM THK)  
15. 8T-8382 [1] SEAL-HEAD  
16. 8C-5219 [1] SEAL-LIP TYPE  
17. 9X-7405 [1] SEAL-U-CUP  
18. 8C-9127 [1] SEAL AS  
19. 8T-3329 [1] RING-WEAR  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25170483
 

123-8097: CYLINDER GP-RIPPER

123-8097 CYLINDER GP-RIPPER
S/N 1NP1-99999; 1PP1-99999
152.4MM (6 IN.) BORE X 456.8MM (18 IN.) STROKE
PART OF 102-9439, 106-4479 RIPPER AR
Type 1
AN ATTACHMENT
i00515138 SEBP2517
1238097 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-8093 [1] CYLINDER AS  
  9V-8427 [2] BAR  
  3G-5999 [1] BUSHING  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
3. 2J-0564 [1] LOCKNUT (2-12-THD)  
4. 9J-5860 [1] RING-WEAR  
5. 4T-4144 [1] SEAL AS  
6. 9T-5805 [1] PISTON  
7. 6J-9747 [1] WASHER (53X105X12.7-MM THK)  
8. 6D-9157 [1] SEAL-O-RING  
9. 8J-1717 [1] RING-BACKUP  
10. 123-8096 [1] HEAD  
11. 9T-0098 [1] ROD AS  
  3G-5999 [1] BUSHING  
12. 2H-3755 [4] BOLT (5/16-18X0.43-IN)  
  7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
13. 9T-0094 [1] RING-WEAR  
14. 9X-8886 [4] BOLT (3/4-10X2.75-IN)  
  5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
15. 8C-9126 [1] SEAL AS  
16. 8C-5218 [1] SEAL-LIP TYPE  
17. 5J-8300 [1] SEAL-U-CUP  
18. 1P-4576 [4] FLANGE-HALF  
19. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
20. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25170484
 

123-8097: CYLINDER GP-RIPPER

123-8097 CYLINDER GP-RIPPER
S/N 1NP1-99999; 1PP1-99999
152.4MM (6 IN.) BORE X 456.8MM (18 IN.) STROKE
PART OF 102-9439, 106-4479 RIPPER AR
Type 2
AN ATTACHMENT
i00644187 SEBP2517
1238097 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-8093 [1] CYLINDER AS  
1A. 3G-5999 [1] BUSHING  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CYLINDER-RIPPER TIP)  
3. 2J-0564 [1] LOCKNUT (2-12-THD)  
4. 9J-5860 [1] RING-WEAR  
5. 4T-4144 [1] SEAL AS  
6. 9T-5805 [1] PISTON  
7. 6J-9747 [1] WASHER (53X105X12.7-MM THK)  
8. 6D-9157 [1] SEAL-O-RING  
9. 8J-1717 [1] RING-BACKUP  
10. 123-8096 [1] HEAD  
11. 9T-0098 [1] ROD AS  
11A. 3G-5999 [1] BUSHING  
12. 9X-8886 [4] BOLT (3/4-10X2.75-IN)  
13. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
14. 225-3284 [1] SEAL-WIPER  
15. 167-2319 [1] SEAL-U-CUP  
16. 167-2208 [1] SEAL AS-BUFFER  
17. 9T-0094 [1] RING-WEAR  
18. 1P-4576 [4] FLANGE-HALF  
19. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
20. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25170485
 

123-8098: CYLINDER GP-RIPPER

123-8098 CYLINDER GP-RIPPER
S/N 1NP1-99999; 1PP1-99999
184.2-MM (7.25-IN.) BORE X 454-MM (17.9-IN.) STROKE. LIFT
PART OF 102-9439, 106-4479 RIPPER AR
AN ATTACHMENT
i00515142 SEBP2517
1238098 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-8094 [1] CYLINDER AS  
1B. 3G-5999 [1] BUSHING  
3. 5J-3488 [1] LOCKNUT (2-1/4-12-THD)  
4. 1J-2674 [1] RING-WEAR  
5. 8T-1790 [1] SEAL AS  
6. 9T-5809 [1] PISTON  
7. 119-8455 [2] WASHER (57.3X100X6.35-MM THK)  
8. 5P-7593 [1] SEAL-O-RING  
9. 1U-1738 [1] RING-BACKUP  
10. 123-8095 [1] HEAD  
11. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
12. 1D-4612 [2] BOLT (3/4-10X4-IN)  
13. 147-6116 [1] ROD AS  
13A. 3G-5999 [1] BUSHING  
15. 8T-6745 [1] RING-WEAR  
16. 9X-8886 [6] BOLT (3/4-10X2.75-IN)  
17. 225-3285 [1] SEAL-WIPER  
18. 167-2320 [1] SEAL-U-CUP  
19. 167-2209 [1] SEAL AS-BUFFER  
20. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
21. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
22. 1P-4576 [4] FLANGE-HALF  
23. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25170486
 

132-5123: CYLINDER GP-RIPPER

132-5123 CYLINDER GP-RIPPER
S/N 5RP1-UP; 5ZP1-UP
184.15-MM (7.25-IN) BORE X 454-MM (17.9-IN) STROKE
PART OF 134-6000, 134-6001 RIPPER AR
Type 1
AN ATTACHMENT
i00496304 SEBP2517
1325123 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 132-5121 [1] CYLINDER AS  
1A. 3G-5999 [1] BUSHING  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
3. 5J-3488 [1] LOCKNUT (2-1/4-12-THD)  
4. 1J-2674 J [1] RING-WEAR  
5. 8T-1790 J [1] SEAL AS  
6. 9T-5809 [1] PISTON  
7. 119-8455 [2] WASHER (57.3X100X6.35-MM THK)  
8. 5P-7593 J [1] SEAL-O-RING  
9. 1U-1738 J [1] RING-BACKUP  
10. 132-5122 [1] HEAD  
11. 8T-3282 [8] WASHER-HARD (22X35X3.5-MM THK)  
12. 6V-9667 M [2] BOLT (M20X2.5X100-MM)  
13. 147-6116 [1] ROD AS  
13A. 3G-5999 [1] BUSHING  
14. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
15. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
16. 6V-5845 M [6] BOLT (M20X2.5X70-MM)  
17. 8T-8389 [1] SEAL-WIPER  
18. 5J-8325 [1] SEAL-U-CUP  
19. 8C-9121 [1] SEAL AS  
20. 8T-6745 J [1] RING-WEAR  
21. 1P-4576 [4] FLANGE-HALF  
22. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
23. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  132-4987 J [1] KIT-HYDRAULIC CYLINDER SEAL  
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25170487
 

132-5123: CYLINDER GP-RIPPER

132-5123 CYLINDER GP-RIPPER
S/N 5RP1-UP; 5ZP1-UP
184.15-MM (7.25-IN) BORE X 454-MM (17.9-IN) STROKE
PART OF 134-6000, 134-6001 RIPPER AR
Type 2
AN ATTACHMENT
i01403970 SEBP2517
1325123 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 132-5121 [1] CYLINDER AS  
1A. 3G-5999 [1] BUSHING  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
3. 5J-3488 [1] LOCKNUT (2-1/4-12-THD)  
4. 1J-2674 [1] RING-WEAR  
5. 8T-1790 [1] SEAL AS  
6. 9T-5809 [1] PISTON  
7. 119-8455 [2] WASHER (57.3X100X6.35-MM THK)  
8. 5P-7593 [1] SEAL-O-RING  
9. 1U-1738 [1] RING-BACKUP  
10. 132-5122 [1] HEAD  
11. 8T-3282 [8] WASHER-HARD (22X35X3.5-MM THK)  
12. 6V-9667 M [2] BOLT (M20X2.5X100-MM)  
13. 147-6116 [1] ROD AS  
13A. 3G-5999 [1] BUSHING  
14. 6V-5845 M [6] BOLT (M20X2.5X70-MM)  
15. 346-5199 [1] SEAL-WIPER  
16. 421-4026 [1] SEAL-U-CUP  
17. 167-2209 [1] SEAL AS-BUFFER  
18. 8T-6745 [1] RING-WEAR  
19. 1P-4576 [4] FLANGE-HALF  
20. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
21. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25170488
 

132-5149: CYLINDER GP-RIPPER

132-5149 CYLINDER GP-RIPPER
S/N 5RP1-UP; 5ZP1-UP
152.4-MM (6-IN) BORE X 456.8-MM (18-IN) STROKE
PART OF 134-6000, 134-6001 RIPPER AR
Type 1
FIELD REPLACEMENT ORDER @@@@@521-8391@@@@@
AN ATTACHMENT
i00496312 SEBP2517
1325149 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 132-5146 [1] CYLINDER AS  
1A. 3G-5999 [1] BUSHING  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
3. 2J-0564 [1] LOCKNUT (2-12-THD)  
4. 9J-5860 [1] RING-WEAR  
5. 4T-4144 [1] SEAL AS  
6. 9T-5805 [1] PISTON  
7. 6J-9747 [1] WASHER (53X105X12.7-MM THK)  
8. 6D-9157 [1] SEAL-O-RING  
9. 8J-1717 [1] RING-BACKUP  
10. 132-5147 [1] HEAD  
11. 9T-0098 [1] ROD AS  
11A. 3G-5999 [1] BUSHING  
12. 6V-5215 M [4] BOLT (M8X1.25X16-MM)  
13. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
14. 6V-5845 M [4] BOLT (M20X2.5X70-MM)  
15. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
16. 8C-5218 [1] SEAL-LIP TYPE  
17. 5J-8300 [1] SEAL-U-CUP  
18. 8C-9126 [1] SEAL AS  
19. 9T-0094 [1] RING-WEAR  
20. 1P-4576 [4] FLANGE-HALF  
21. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
22. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25170489
 

132-5149: CYLINDER GP-RIPPER

132-5149 CYLINDER GP-RIPPER
S/N 5RP1-UP; 5ZP1-UP
152.4-MM (6-IN) BORE X 456.8-MM (18-IN) STROKE
PART OF 134-6000, 134-6001 RIPPER AR
Type 2
FIELD REPLACEMENT ORDER @@@@@521-8391@@@@@
AN ATTACHMENT
i01390990 SEBP2517
1325149 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 132-5146 [1] CYLINDER AS  
1A. 3G-5999 [1] BUSHING  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
3. 2J-0564 [1] LOCKNUT (2-12-THD)  
4. 9J-5860 [1] RING-WEAR  
5. 4T-4144 [1] SEAL AS  
6. 9T-5805 [1] PISTON  
7. 6J-9747 [1] WASHER (53X105X12.7-MM THK)  
8. 6D-9157 [1] SEAL-O-RING  
9. 8J-1717 [1] RING-BACKUP  
10. 132-5147 [1] HEAD  
11. 9T-0098 [1] ROD AS  
11A. 3G-5999 [1] BUSHING  
12. 6V-5845 M [4] BOLT (M20X2.5X70-MM)  
13. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
14. 312-4247 [1] SEAL-WIPER  
15. 167-2319 [1] SEAL-U-CUP  
16. 312-4248 [1] SEAL AS-BUFFER  
17. 9T-0094 [1] RING-WEAR  
18. 1P-4576 [4] FLANGE-HALF  
19. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Tool Operating Manual
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Caterpillar Parts SIS Catalog D9R :

CYLINDER GP-BULLDOZER LIFT
6E-4433 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
6E-4433 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
4Z-6172 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
4Z-6172 CYLINDER GP-BULLDOZER LIFT
CYLINDER AR-DUAL TILT
106-7362 CYLINDER AR-DUAL TILT
137-7364 CYLINDER & LINES GP-TILT
137-7371 CYLINDER & LINES GP-RIPPER
143-7412 CYLINDER & LINES GP-LIFT
CYLINDER GP-DUAL TILT
4Z-6356 CYLINDER GP-DUAL TILT
CYLINDER GP-DUAL TILT
4Z-6357 CYLINDER GP-DUAL TILT
CYLINDER GP-RIPPER
123-8097 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
123-8097 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
123-8098 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
132-5123 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
132-5123 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
132-5149 CYLINDER GP-RIPPER

Truck sale:

 
 
Caterpillar D9R
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D9R, Crawler dozers, Construction
276,938 
Caterpillar D9R, Crawler dozers, Construction
- Crawler dozers
FINNING CANADA
Caterpillar D 9 R, Crawler dozers, Construction
260,000 
Caterpillar D 9 R, Crawler dozers, Construction

MOHAMED ABDULRAHMAN AL-BAHAR
Caterpillar D9R, Rupsdozers, Bouw
132.000 
Caterpillar D9R, Rupsdozers, Bouw

CLEVELAND BROTHERS EQUIPMENT COMPANY INC
 
 
Caterpillar D9R MS RIP, Aufreisser, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.