AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

110-4650 CONTROL GP-TOWING WINCH S/N 8BL830-1052 PART OF 6I-9355 INSTALLATION AR-WINCH Type 1 AN ATTACHMENT D9R


WORK TOOLS
WINCH GP
GROUND ENGAGING TOOLS (G.E.T.)
WINCH GP

TRACK-TYPE TRACTOR D9R TRACK-TYPE TRACTOR 8BL
 D9R Track-Type Tractor Power Shift 8BL00830-01052 (MACHINE) POWERED BY 3408 Engine SEBP2517 D9R 8BL   (1994)

WORK TOOLS

WINCH GP
LINES GP-WINCH
107-1817 LINES GP-WINCH
CONTROL GP-TOWING WINCH
110-4650 CONTROL GP-TOWING WINCH
CONTROL GP-TOWING WINCH
110-4650 CONTROL GP-TOWING WINCH
FAIRLEAD GP-WINCH
9P-7728 FAIRLEAD GP-WINCH
6I-9355 INSTALLATION AR-WINCH
 

#SEBP25170710
 

110-4650: CONTROL GP-TOWING WINCH

110-4650 CONTROL GP-TOWING WINCH
S/N 8BL830-1052
PART OF 6I-9355 INSTALLATION AR-WINCH
Type 1
AN ATTACHMENT
i00470662 SEBP2517
1104650 CONTROL GP-TOWING WINCH Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9818 [1] COVER AS  
  9F-2978 [8] NUT-WELD (3/8-16-THD)  
2. 6P-5661 [1] GUIDE  
3. 030-7571 [4] BOLT (3/8-16X1-IN)  
4. 3P-5938 [1] SPRING  
5. 4B-1284 [1] SCREW-MACHINE (1/4-20X1-IN)  
  6V-8185 [1] NUT (1/4-20-THD)  
6. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 7S-4244 [1] CLIP  
8. 2A-1736 [1] HANDLE  
9. 3T-8250 [1] LEVER AS  
10. 6P-8863 [1] PLATE  
11. 4B-1282 [2] SCREW-MACHINE (1/4-20X0.75-IN)  
12. 6P-8861 [1] PLATE  
13. 6P-8862 [1] PLATE  
14. 6Y-2044 [1] SPRING  
15. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
16. 8T-4896 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 3T-8340 [1] PLATE  
18. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
19. 7T-5463 [1] CHANNEL AS  
  5P-4887 [2] BEARING-ROLLER  
20. 3T-5231 [1] PLATE  
21. 3T-8341 [1] BOOT  
22. 3T-8343 [1] BELLCRANK AS  
  9H-2400 [2] BEARING  
23. 6L-7751 [2] ROD END  
24. 3T-8349 [1] COVER  
  3T-8339 [1] GASKET  
25. 8T-9379 [1] BOLT (3/8-16X4.25-IN)  
26. 8T-9364 [5] BOLT (1/4-20X0.625-IN)  
27. 6V-8187 [3] NUT (1/4-28-THD)  
28. 9S-1354 [8] NUT (5/8-18-THD)  
29. 1V-6341 [4] SEAL  
30. 8S-7048 [1] ROD END  
31. 2L-9038 [2] LOCKNUT (1/4-28-THD)  
  0S-1597 [2] BOLT (1/4-28X1-IN)  
32. 8E-5978 [1] GASKET  
33. 2H-2525 [1] PIN-SPRING  
34. 2P-6008 [1] SHAFT  
35. 3T-8356 [1] CABLE AS  
36. 3T-8357 [1] CABLE AS  
37. 9G-8661 [1] SPACER (10X16X20-MM THK)  
38. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
 

#SEBP25170711
 

110-4650: CONTROL GP-TOWING WINCH

110-4650 CONTROL GP-TOWING WINCH
S/N 8BL830-1052
PART OF 6I-9355 INSTALLATION AR-WINCH
Type 2
AN ATTACHMENT
i00618616 SEBP2517
1104650 CONTROL GP-TOWING WINCH Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-8383 C [1] COVER AS  
  1F-0750 [9] NUT-WELD (3/8-16-THD)  
2. 6P-5661 [1] GUIDE  
3. 030-7571 [4] BOLT (3/8-16X1-IN)  
4. 3P-5938 [1] SPRING  
5. 4B-1284 [1] SCREW-MACHINE (1/4-20X1-IN)  
  6V-8185 [1] NUT (1/4-20-THD)  
6. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 7S-4244 [1] CLIP  
8. 2A-1736 [1] HANDLE  
9. 3T-8250 [1] LEVER AS  
10. 6P-8863 [1] PLATE  
11. 4B-1282 [2] SCREW-MACHINE (1/4-20X0.75-IN)  
12. 6P-8861 [1] PLATE  
13. 6P-8862 [1] PLATE  
14. 6Y-2044 [1] SPRING  
15. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
16. 8T-4896 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 3T-8340 [1] PLATE  
18. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
19. 7T-5463 [1] CHANNEL AS  
  5P-4887 [2] BEARING-ROLLER  
20. 3T-5231 [1] PLATE  
21. 3T-8341 [1] BOOT  
22. 3T-8343 [1] BELLCRANK AS  
  9H-2400 [2] BEARING  
23. 6L-7751 [2] ROD END  
24. 3T-8349 [1] COVER  
  3T-8339 [1] GASKET  
25. 8T-9379 [1] BOLT (3/8-16X4.25-IN)  
26. 8T-9364 [5] BOLT (1/4-20X0.625-IN)  
27. 6V-8187 [3] NUT (1/4-28-THD)  
28. 9S-1354 [8] NUT (5/8-18-THD)  
29. 1V-6341 [4] SEAL  
30. 8S-7048 [1] ROD END  
31. 2L-9038 [2] LOCKNUT (1/4-28-THD)  
  0S-1597 [2] BOLT (1/4-28X1-IN)  
32. 8E-5978 [1] GASKET  
33. 2H-2525 [1] PIN-SPRING  
34. 2P-6008 [1] SHAFT  
35. 3T-8356 [1] CABLE AS  
36. 3T-8357 [1] CABLE AS  
37. 9G-8661 [1] SPACER (10X16X20-MM THK)  
38. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
39. 9X-3994 C [1] PLUG  
40. 3E-0109 C [1] PLUG (ROCKER SWITCH)  
41. 135-8172 C [1] CONTROL AS  
  135-8175 [1] PLATE  
42. 135-8173 [2] NUT  
43. 135-8174 [1] TAB  
44. 135-8178 [2] WASHER  
45. 135-8176 [1] SPACER  
46. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
47. 135-8179 [1] SPRING  
48. 8T-2501 [1] BOLT (3/8-16X2-IN)  
49. 7P-3895 C [2] BUTTON-PLUG  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25170712
 

113-0320: EDGE GP-BIT & CUTTING

113-0320 EDGE GP-BIT & CUTTING -HEAVY-DUTY
S/N 8BL830-1052
MINING
FOR USE WITH SEMI-UNIVERSAL BULLDOZERS
AN ATTACHMENT AND FIELD INSTALLATION
i00471388 SEBP2517
1130320 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-0321 [2] EDGE-CUTTING  
2. 113-0322 [1] EDGE-CUTTING  
3. 113-0332 [1] BIT AS (RH)  
4. 113-0333 [1] BIT AS (LH)  
5. 2J-3507 [36] NUT-FULL (1-8-THD)  
6. 4J-9208 [36] BOLT-PLOW (1-8X3.5-IN)  
7. 5P-8250 [36] WASHER (28X49X5-MM THK)  
 

#SEBP25170713
 

6Y-5628: EDGE GP-BIT & CUTTING

6Y-5628 EDGE GP-BIT & CUTTING
S/N 8BL830-1052
THIN EDGE
FOR USE WITH SEMI-UNIVERSAL BULLDOZER BLADES
AN ATTACHMENT
i00392890 SEBP2517
6Y5628 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-4278 [1] BIT-END (LH)  
2. 6Y-4277 [1] BIT-END (RH)  
3. 6Y-5540 [2] EDGE-CUTTING  
4. 6Y-5539 [1] EDGE-CUTTING  
5. 4J-9058 [36] BOLT-PLOW (1-8X3.25-IN)  
    -OR-
  4J-9208 [36] BOLT-PLOW (1-8X3.5-IN)(88.9 MM)  
  5P-8250 [36] WASHER (28X49X5-MM THK)  
  2J-3507 [36] NUT-FULL (1-8-THD)  
 

#SEBP25170714
 

6Y-5629: EDGE GP-BIT & CUTTING

6Y-5629 EDGE GP-BIT & CUTTING
S/N 8BL830-1052
THIN EDGE
FOR USE WITH UNIVERSAL BULLDOZER BLADES
AN ATTACHMENT
i00392894 SEBP2517
6Y5629 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-4278 [1] BIT-END (LH)  
2. 6Y-4277 [1] BIT-END (RH)  
3. 6Y-5540 [2] EDGE-CUTTING  
4. 6Y-5538 [1] EDGE-CUTTING  
5. 4J-9058 [39] BOLT-PLOW (1-8X3.25-IN)  
    -OR-
  4J-9208 [39] BOLT-PLOW (1-8X3.5-IN)(1-8X88.90MM)  
6. 5P-8250 [39] WASHER (28X49X5-MM THK)  
  2J-3507 [39] NUT-FULL (1-8-THD)  
 

#SEBP25170715
 

7T-5391: EDGE GP-BIT & CUTTING

7T-5391 EDGE GP-BIT & CUTTING
S/N 8BL830-1052; 1LP1-UP
PART OF 102-6346, 102-6347, 108-8290 BLADE & EDGE GP-SEMI-UNIVERSAL
AN ATTACHMENT
i00423476 SEBP2517
7T5391 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-4196 [1] BIT-END (LH)  
2. 8E-4197 [1] BIT-END (RH)  
3. 7T-9125 [2] EDGE-CUTTING  
4. 7T-5702 [1] EDGE-CUTTING  
5. 4J-9208 [36] BOLT-PLOW (1-8X3.5-IN)  
  5P-8250 [36] WASHER (28X49X5-MM THK)  
  2J-3507 [36] NUT-FULL (1-8-THD)  
 

#SEBP25170716
 

7T-5394: EDGE GP-BIT & CUTTING

7T-5394 EDGE GP-BIT & CUTTING
S/N 8BL830-1052; 1MP1-UP
PART OF 108-8291, 113-3240 BLADE & EDGE GP-UNIVERSAL
AN ATTACHMENT
i00423502 SEBP2517
7T5394 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-4196 [1] BIT-END (LH)  
2. 8E-4197 [1] BIT-END (RH)  
3. 7T-9125 [2] EDGE-CUTTING  
4. 7T-5701 [1] EDGE-CUTTING  
5. 4J-9208 [39] BOLT-PLOW (1-8X3.5-IN)  
  5P-8250 [39] WASHER (28X49X5-MM THK)  
  2J-3507 [39] NUT-FULL (1-8-THD)  
 

#SEBP25170717
 

9W-7041: EDGE GP-BIT & CUTTING

9W-7041 EDGE GP-BIT & CUTTING
S/N 8BL830-1052
ABRASION
AN ATTACHMENT
i00433351 SEBP2517
9W7041 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-4539 [1] BIT-END (RH)  
  8E-4540 [1] BIT-END (LH)  
2. 9W-7043 [1] EDGE-CUTTING  
3. 112-2471 [2] EDGE-CUTTING  
4. 4J-9058 [36] BOLT-PLOW (1-8X3.25-IN)  
    -OR-
  4J-9208 [36] BOLT-PLOW (1-8X3.5-IN)  
  5P-8250 [36] WASHER (28X49X5-MM THK)  
  2J-3507 [36] NUT-FULL (1-8-THD)  
 

#SEBP25170718
 

9W-7042: EDGE GP-BIT & CUTTING

9W-7042 EDGE GP-BIT & CUTTING
S/N 8BL830-1052
ABRASION
AN ATTACHMENT
i00433353 SEBP2517
9W7042 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-4539 [1] BIT-END (RH)  
  8E-4540 [1] BIT-END (LH)  
2. 9W-7044 [1] EDGE-CUTTING  
3. 112-2471 [2] EDGE-CUTTING  
4. 4J-9058 [39] BOLT-PLOW (1-8X3.25-IN)  
    OR
  4J-9208 [39] BOLT-PLOW (1-8X3.5-IN)  
5. 5P-8250 [39] WASHER (28X49X5-MM THK)  
  2J-3507 [39] NUT-FULL (1-8-THD)  
 

#SEBP25170719
 

9P-7728: FAIRLEAD GP-WINCH

9P-7728 FAIRLEAD GP-WINCH
S/N 8BL830-1052
AN ATTACHMENT
i00441256 SEBP2517
9P7728 FAIRLEAD GP-WINCH Parts scheme
  For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6P-3470 [2] SHAFT  
2. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
3. 7S-9372 [6] BOLT (5/8-11X1.125-IN)  
4. 9G-8253 [3] CLIP  
5. 9P-7526 [1] FRAME AS  
6. 6P-3471 [1] SHAFT  
7. 9P-9726 [6] WASHER  
8. 3D-2898 [6] SEAL-O-RING  
  5P-8476 [6] SEAL-RING  
9. 7J-6250 [6] BUSHING  
10. 6P-3473 [2] ROLLER AS  
11. 9P-7453 [6] CARRIER-SEAL  
12. 9P-7523 [2] SUPPORT  
13. 1P-7545 [2] PIN  
  3B-5325 [2] PIN-COTTER  
14. 9P-7452 [1] ROLLER AS  
 

Information:

Caterpillar Parts SIS Catalog D9R :

BLADE GP-UNIVERSAL
106-7365 BLADE GP-UNIVERSAL
BLADE GP-SEMI-UNIVERSAL
102-6345 BLADE GP-SEMI-UNIVERSAL
113-3241 BLADE AS-UNIVERSAL
BLADE AS-UNIVERSAL
108-8318 BLADE AS-UNIVERSAL
BLADE AS-UNIVERSAL
108-8318 BLADE AS-UNIVERSAL
113-3239 BLADE AS-SEMI-UNIVERSAL
102-1938 BLADE AS-SEMI-UNIVERSAL
BLADE AS-SEMI-UNIVERSAL
102-1904 BLADE AS-SEMI-UNIVERSAL
CONTROL GP-TOWING WINCH
110-4650 CONTROL GP-TOWING WINCH
EDGE GP-BIT & CUTTING
113-0320 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
6Y-5628 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
6Y-5629 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
7T-5391 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
7T-5394 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
9W-7041 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
9W-7042 EDGE GP-BIT & CUTTING

Truck sale:

 
 
Caterpillar D9R
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D9R, Crawler dozers, Construction
276,938 
Caterpillar D9R, Crawler dozers, Construction
- Crawler dozers
FINNING CANADA
Caterpillar D 9 R, Crawler dozers, Construction
260,000 
Caterpillar D 9 R, Crawler dozers, Construction

MOHAMED ABDULRAHMAN AL-BAHAR
Caterpillar D9R, Rupsdozers, Bouw
132.000 
Caterpillar D9R, Rupsdozers, Bouw

CLEVELAND BROTHERS EQUIPMENT COMPANY INC
 
 
Caterpillar D9R MS RIP, Aufreisser, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.