106-7362 CYLINDER AR-DUAL TILT S/N 7TL557-851 AN ATTACHMENT D9R TRACK-TYPE TRACTOR

Pos.	Part No	Qty	Parts name
1.	8E-9891 Y	[1]	LINES GP-TILT CYLINDER
2.	106-7363 Y	[1]	LINK GP-STABILIZER
3.	109-8832 Y	[1]	CYLINDER GP-TILT (RH)
4.	109-8833 Y	[1]	CYLINDER GP-TILT (LH)
	Y		SEPARATE ILLUSTRATION

#SEBP25180541

4Z-6172: CYLINDER GP-BULLDOZER LIFT

4Z-6172 CYLINDER GP-BULLDOZER LIFT
S/N 7TL557-851
120.65-MM (4.75-IN.) BORE X 1570-MM (61.8-IN.) STROKE
PART OF 124-9338, 124-9339 CYLINDER & LINES GP
AN ATTACHMENT

i00380858 SEBP2518

4Z6172 CYLINDER GP-BULLDOZER LIFT Parts scheme

For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	6E-4493	[1]	CYLINDER AS
	5J-1192	[2]	BUSHING
2.	8T-1605 M	[1]	BOLT (M36X4X100-MM)
3.	106-1017	[1]	WASHER (36.7X77X6-MM THK)
4.	6E-4495	[1]	PISTON AS
5.	4T-8588	[1]	SEAL AS
6.	4T-9248	[1]	RING-WEAR
7.	4Z-6171	[1]	HEAD
8.	6E-4497	[1]	ROD AS
9.	126-6675	[1]	CAP-BEARING
10.	8T-0672 M	[4]	BOLT (M24X3X160-MM)
11.	3G-0911 B	[28]	SHIM (0.8-MM THK)
12.	7X-0851 M	[4]	NUT (M24X3-THD)
13.	5F-3144	[1]	SEAL-O-RING
14.	2J-3961	[1]	RING-BACKUP
15.	7M-2275	[1]	RING-RETAINING
16.	8C-5218	[1]	SEAL-LIP TYPE
17.	8C-9161	[1]	RING-WEAR
18.	9X-7412	[1]	SEAL-U-CUP
19.	8C-9126	[1]	SEAL AS
	B		USE AS REQUIRED
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP25180542

6E-4433: CYLINDER GP-BULLDOZER LIFT

6E-4433 CYLINDER GP-BULLDOZER LIFT
S/N 7TL557-851; 1LP1-99999; 1MP1-99999
120.65MM (4.75 IN.) BORE X 1570MM (61.8 IN.) STROKE
PART OF 104-3150, 104-3152 CYLINDER & LINES GP
Type 1
AN ATTACHMENT

i00400278 SEBP2518

6E4433 CYLINDER GP-BULLDOZER LIFT Parts scheme

For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	6E-4493	[1]	CYLINDER AS
	5J-1192	[2]	BUSHING
2.	8T-1605 M	[1]	BOLT (M36X4X100-MM)
3.	106-1017	[1]	WASHER (36.7X77X6-MM THK)
4.	8C-9161	[1]	RING-WEAR
5.	5F-3144	[1]	SEAL-O-RING
6.	2J-3961	[1]	RING-BACKUP
7.	4Z-6171	[1]	HEAD
8.	6E-4497	[1]	ROD AS
9.	126-6675	[1]	CAP-BEARING
10.	8T-0672 M	[4]	BOLT (M24X3X160-MM)
11.	3G-0911 B	[28]	SHIM (0.8-MM THK)
12.	7X-0851 M	[4]	NUT (M24X3-THD)
13.	7M-2275	[1]	RING-RETAINING
14.	8C-5218	[1]	SEAL-LIP TYPE
15.	5J-8300	[1]	SEAL-U-CUP
16.	8C-9126	[1]	SEAL AS
17.	6E-4495	[1]	PISTON AS
18.	4T-9248	[1]	RING-WEAR
19.	4T-8588	[1]	SEAL AS
	B		USE AS REQUIRED
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP25180543

6E-4433: CYLINDER GP-BULLDOZER LIFT

6E-4433 CYLINDER GP-BULLDOZER LIFT
S/N 7TL557-851; 1LP1-99999; 1MP1-99999
120.65MM (4.75 IN.) BORE X 1570MM (61.8 IN.) STROKE
PART OF 104-3150, 104-3152 CYLINDER & LINES GP
Type 2
AN ATTACHMENT

i00400284 SEBP2518

For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	6E-4493	[1]	CYLINDER AS
	5J-1192	[2]	BUSHING
2.	8T-1605 M	[1]	BOLT (M36X4X100-MM)
3.	106-1017	[1]	WASHER (36.7X77X6-MM THK)
4.	8C-9161	[1]	RING-WEAR
5.	2J-8163 C	[1]	SEAL-O-RING
6.	2J-3961	[1]	RING-BACKUP
7.	4Z-6171	[1]	HEAD
8.	6E-4497	[1]	ROD AS
9.	160-6310	[1]	CAP-BEARING
10.	8T-0672 M	[4]	BOLT (M24X3X160-MM)
11.	3G-0911 B	[28]	SHIM (0.8-MM THK)
12.	7X-0851 M	[4]	NUT (M24X3-THD)
13.	7M-2275	[1]	RING-RETAINING
14.	8C-5218	[1]	SEAL-LIP TYPE
15.	5J-8300	[1]	SEAL-U-CUP
16.	8C-9126	[1]	SEAL AS
17.	131-7823 C	[1]	PISTON AS
18.	131-7184	[1]	RING-WEAR
19.	4T-8588	[1]	SEAL AS
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP25180544

6E-4433: CYLINDER GP-BULLDOZER LIFT

6E-4433 CYLINDER GP-BULLDOZER LIFT
S/N 7TL557-851; 1LP1-99999; 1MP1-99999
120.65MM (4.75 IN.) BORE X 1570MM (61.8 IN.) STROKE
PART OF 104-3150, 104-3152 CYLINDER & LINES GP
Type 3
AN ATTACHMENT

i01114979 SEBP2518

For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	6E-4493	[1]	CYLINDER AS
1A.	5J-1192	[2]	BUSHING
3.	106-1017	[1]	WASHER (36.7X77X6-MM THK)
4.	131-7823	[1]	PISTON AS
4A.	4T-8588	[1]	SEAL AS
6.	2J-3961 C	[1]	RING-BACKUP
7.	164-6403 C	[1]	HEAD
8.	6E-4497	[1]	ROD AS
9.	160-6310	[1]	CAP-BEARING
10.	8T-0672 M	[4]	BOLT (M24X3X160-MM)
11.	3G-0911 B	[28]	SHIM (0.8-MM THK)
12.	7X-0851 M	[4]	NUT (M24X3-THD)
13.	312-4247 C	[1]	SEAL-WIPER
14.	312-4245	[1]	SEAL-U-CUP
15.	312-4248 C	[1]	SEAL AS-BUFFER
16.	8C-9161	[1]	RING-WEAR
17.	131-7184	[1]	RING-WEAR
18.	175-7903	[1]	SEAL-O-RING
19.	173-9682 CM	[1]	BOLT (M36X4X100-MM)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP25180545

123-8097: CYLINDER GP-RIPPER

123-8097 CYLINDER GP-RIPPER
S/N 1NP1-99999; 1PP1-99999
152.4MM (6 IN.) BORE X 456.8MM (18 IN.) STROKE
PART OF 102-9439, 106-4479 RIPPER AR
Type 1
AN ATTACHMENT

i00515138 SEBP2518

For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	123-8093	[1]	CYLINDER AS
	9V-8427	[2]	BAR
	3G-5999	[1]	BUSHING
2.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
3.	2J-0564	[1]	LOCKNUT (2-12-THD)
4.	9J-5860	[1]	RING-WEAR
5.	4T-4144	[1]	SEAL AS
6.	9T-5805	[1]	PISTON
7.	6J-9747	[1]	WASHER (53X105X12.7-MM THK)
8.	6D-9157	[1]	SEAL-O-RING
9.	8J-1717	[1]	RING-BACKUP
10.	123-8096	[1]	HEAD
11.	9T-0098	[1]	ROD AS
	3G-5999	[1]	BUSHING
12.	2H-3755	[4]	BOLT (5/16-18X0.43-IN)
	7S-6369	[4]	WASHER (0.344X0.75X0.188-IN THK)
13.	9T-0094	[1]	RING-WEAR
14.	9X-8886	[4]	BOLT (3/4-10X2.75-IN)
	5P-8248	[4]	WASHER-HARD (20X36.5X3.5-MM THK)
15.	8C-9126	[1]	SEAL AS
16.	8C-5218	[1]	SEAL-LIP TYPE
17.	5J-8300	[1]	SEAL-U-CUP
18.	1P-4576	[4]	FLANGE-HALF
19.	5S-7382	[8]	BOLT (3/8-16X1.375-IN)
20.	8T-4896	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP25180546

123-8097: CYLINDER GP-RIPPER

123-8097 CYLINDER GP-RIPPER
S/N 1NP1-99999; 1PP1-99999
152.4MM (6 IN.) BORE X 456.8MM (18 IN.) STROKE
PART OF 102-9439, 106-4479 RIPPER AR
Type 2
AN ATTACHMENT

i00644187 SEBP2518

For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	123-8093	[1]	CYLINDER AS
1A.	3G-5999	[1]	BUSHING
2.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)(CYLINDER-RIPPER TIP)
3.	2J-0564	[1]	LOCKNUT (2-12-THD)
4.	9J-5860	[1]	RING-WEAR
5.	4T-4144	[1]	SEAL AS
6.	9T-5805	[1]	PISTON
7.	6J-9747	[1]	WASHER (53X105X12.7-MM THK)
8.	6D-9157	[1]	SEAL-O-RING
9.	8J-1717	[1]	RING-BACKUP
10.	123-8096	[1]	HEAD
11.	9T-0098	[1]	ROD AS
11A.	3G-5999	[1]	BUSHING
12.	9X-8886	[4]	BOLT (3/4-10X2.75-IN)
13.	5P-8248	[4]	WASHER-HARD (20X36.5X3.5-MM THK)
14.	225-3284	[1]	SEAL-WIPER
15.	167-2319	[1]	SEAL-U-CUP
16.	167-2208	[1]	SEAL AS-BUFFER
17.	9T-0094	[1]	RING-WEAR
18.	1P-4576	[4]	FLANGE-HALF
19.	8T-4896	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
20.	5S-7382	[8]	BOLT (3/8-16X1.375-IN)
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP25180547

123-8098: CYLINDER GP-RIPPER

123-8098 CYLINDER GP-RIPPER
S/N 1NP1-99999; 1PP1-99999
184.2-MM (7.25-IN.) BORE X 454-MM (17.9-IN.) STROKE. LIFT
PART OF 102-9439, 106-4479 RIPPER AR
AN ATTACHMENT

i00515142 SEBP2518

For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	123-8094	[1]	CYLINDER AS
1B.	3G-5999	[1]	BUSHING
3.	5J-3488	[1]	LOCKNUT (2-1/4-12-THD)
4.	1J-2674	[1]	RING-WEAR
5.	8T-1790	[1]	SEAL AS
6.	9T-5809	[1]	PISTON
7.	119-8455	[2]	WASHER (57.3X100X6.35-MM THK)
8.	5P-7593	[1]	SEAL-O-RING
9.	1U-1738	[1]	RING-BACKUP
10.	123-8095	[1]	HEAD
11.	5P-8248	[8]	WASHER-HARD (20X36.5X3.5-MM THK)
12.	1D-4612	[2]	BOLT (3/4-10X4-IN)
13.	147-6116	[1]	ROD AS
13A.	3G-5999	[1]	BUSHING
15.	8T-6745	[1]	RING-WEAR
16.	9X-8886	[6]	BOLT (3/4-10X2.75-IN)
17.	225-3285	[1]	SEAL-WIPER
18.	167-2320	[1]	SEAL-U-CUP
19.	167-2209	[1]	SEAL AS-BUFFER
20.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
21.	5S-7382	[8]	BOLT (3/8-16X1.375-IN)
22.	1P-4576	[4]	FLANGE-HALF
23.	8T-4896	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP25180548

132-5123: CYLINDER GP-RIPPER

132-5123 CYLINDER GP-RIPPER
S/N 5RP1-99999; 5ZP1-99999
184.15-MM (7.25-IN) BORE X 454-MM (17.9-IN) STROKE
PART OF 134-6000, 134-6001 RIPPER AR
Type 1
AN ATTACHMENT

i00496304 SEBP2518

For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	132-5121	[1]	CYLINDER AS
1A.	3G-5999	[1]	BUSHING
2.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
3.	5J-3488	[1]	LOCKNUT (2-1/4-12-THD)
4.	1J-2674 J	[1]	RING-WEAR
5.	8T-1790 J	[1]	SEAL AS
6.	9T-5809	[1]	PISTON
7.	119-8455	[2]	WASHER (57.3X100X6.35-MM THK)
8.	5P-7593 J	[1]	SEAL-O-RING
9.	1U-1738 J	[1]	RING-BACKUP
10.	132-5122	[1]	HEAD
11.	8T-3282	[8]	WASHER-HARD (22X35X3.5-MM THK)
12.	6V-9667 M	[2]	BOLT (M20X2.5X100-MM)
13.	147-6116	[1]	ROD AS
13A.	3G-5999	[1]	BUSHING
14.	7S-6369	[4]	WASHER (0.344X0.75X0.188-IN THK)
15.	6V-5215 M	[4]	BOLT (M8X1.25X16-MM)
16.	6V-5845 M	[6]	BOLT (M20X2.5X70-MM)
17.	8T-8389	[1]	SEAL-WIPER
18.	5J-8325	[1]	SEAL-U-CUP
19.	8C-9121	[1]	SEAL AS
20.	8T-6745 J	[1]	RING-WEAR
21.	1P-4576	[4]	FLANGE-HALF
22.	8T-4196 M	[8]	BOLT (M10X1.5X35-MM)
23.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)

			AVAILABLE REPAIR KIT(S):
	132-4987 J	[1]	KIT-HYDRAULIC CYLINDER SEAL
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP25180549

132-5123: CYLINDER GP-RIPPER

132-5123 CYLINDER GP-RIPPER
S/N 5RP1-99999; 5ZP1-99999
184.15-MM (7.25-IN) BORE X 454-MM (17.9-IN) STROKE
PART OF 134-6000, 134-6001 RIPPER AR
Type 2
AN ATTACHMENT

i01403970 SEBP2518

For full view, you need register

Parts for your D9R TRACK-TYPE TRACTOR: