HYDRAULIC SYSTEM
VALVE GP-SOLENOIDVALVE GP-CONTROL
IMPLEMENTS
BULLDOZER GPFRAME GP
TRUNNION GP
HYDRAULIC SYSTEM
VALVE GP-SOLENOID
#SEBP25180620
3E-9205: VALVE GP-SOLENOID
3E-9205 VALVE GP-SOLENOID
S/N 7TL557-851
24-VOLT
PART OF 106-9648 VALVE GP-TILT CONTROL
Type 1
AN ATTACHMENT
S/N 7TL557-851
24-VOLT
PART OF 106-9648 VALVE GP-TILT CONTROL
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6T-9244 | [1] | CARTRIDGE AS | |
| 2. | 3E-8581 | [1] | COIL AS (24-VOLT) | |
| 3. | 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 4. | 1S-9593 | [2] | STRAP-CABLE | |
| 5. | 157-2284 | [1] | LOCKNUT-SPECIAL (5/8-18-THD) | |
| 6. | 160-5843 | [1] | WASHER (16.8X38.1X0.5-MM THK) | |
| 7. | 160-5844 | [1] | WASHER-SPRING (16.3X31.5X1.85-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 6T-3381 | [1] | KIT-SEAL (SOLENOID VALVE) | ||
| (INCLUDES O-RING SEALS & BACKUP RINGS) | ||||
#SEBP25180621
3E-9205: VALVE GP-SOLENOID
3E-9205 VALVE GP-SOLENOID
S/N 7TL557-851
24-VOLT
PART OF 106-9648 VALVE GP-TILT CONTROL
Type 2
AN ATTACHMENT
S/N 7TL557-851
24-VOLT
PART OF 106-9648 VALVE GP-TILT CONTROL
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6T-9244 C | [1] | CARTRIDGE AS | |
| 2. | 3E-8581 C | [1] | COIL AS (24-VOLT) | |
| 3. | 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 4. | 1S-9593 | [2] | STRAP-CABLE | |
| 5. | 157-2284 | [1] | LOCKNUT-SPECIAL (5/8-18-THD) | |
| 6. | 160-5843 | [1] | WASHER (16.8X38.1X0.5-MM THK) | |
| 7. | 160-5844 | [1] | WASHER-SPRING (16.3X31.5X1.85-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 126-5948 C | [1] | KIT-SEAL (SOLENOID VALVE) | ||
| (INCLUDES O-RING SEALS & BACKUP RINGS) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP25180622
106-9648: VALVE GP-TILT CONTROL
106-9648 VALVE GP-TILT CONTROL -DUAL
S/N 7TL557-851
PART OF 8E-7110 CONTROL AR-HYDRAULIC
Type 1
AN ATTACHMENT
S/N 7TL557-851
PART OF 8E-7110 CONTROL AR-HYDRAULIC
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5S-7382 | [16] | BOLT (3/8-16X1.375-IN) | |
| 2. | 8T-4896 | [16] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 3. | 8J-8621 | [2] | SPRING | |
| 4. | 9J-1722 | [2] | RETAINER | |
| 5. | 5P-0076 | [4] | BOLT-12 POINT HEAD (3/8-16X1.5-IN) | |
| 6. | 1P-4576 | [6] | FLANGE-HALF | |
| 7. | 9J-1716 | [2] | COVER | |
| 8. | 4J-0522 | [2] | SEAL-O-RING | |
| 9. | 9S-4191 | [2] | PLUG (9/16-18-THD) | |
| 10. | 3J-1907 | [2] | SEAL-O-RING | |
| 11. | 3E-9205 Y | [1] | VALVE GP-SOLENOID (24-VOLT) | |
| 12. | 1P-4577 | [2] | FLANGE-HALF | |
| 13. | 4T-6920 Y | [1] | VALVE GP-CONTROL | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25180623
106-9648: VALVE GP-TILT CONTROL
106-9648 VALVE GP-TILT CONTROL -DUAL
S/N 7TL557-851
PART OF 8E-7110 CONTROL AR-HYDRAULIC
Type 2
AN ATTACHMENT
S/N 7TL557-851
PART OF 8E-7110 CONTROL AR-HYDRAULIC
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-8001 C | [1] | PLUG | |
| 4J-7533 C | [4] | SEAL-O-RING | ||
| 2. | 8T-4896 | [16] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 3. | 8J-8621 | [2] | SPRING | |
| 4. | 9J-1722 | [2] | RETAINER | |
| 5. | 5P-0076 | [4] | BOLT-12 POINT HEAD (3/8-16X1.5-IN) | |
| 6. | 1P-4576 | [6] | FLANGE-HALF | |
| 7. | 9J-1716 | [2] | COVER | |
| 8. | 4J-0522 | [2] | SEAL-O-RING | |
| 9. | 9S-4191 | [2] | PLUG (9/16-18-THD) | |
| 10. | 3J-1907 C | [3] | SEAL-O-RING | |
| 11. | 3E-9205 Y | [1] | VALVE GP-SOLENOID (24-VOLT)(TILT/TIP FUNCTION) | |
| 12. | 1P-4577 | [2] | FLANGE-HALF | |
| 13. | 9S-8004 C | [1] | PLUG (9/16-18-THD) | |
| 14. | 5S-7382 | [16] | BOLT (3/8-16X1.375-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25180624
108-8281: BULLDOZER AR-SEMI-UNIVERSAL
108-8281 BULLDOZER AR-SEMI-UNIVERSAL
S/N 1LP1-99999
SEMI-UNIVERSAL
AN ATTACHMENT
S/N 1LP1-99999
SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 102-6345 Y | [1] | BLADE GP-SEMI-UNIVERSAL | ||
| 8E-9890 Y | [1] | LINES GP-TILT CYLINDER | ||
| 8E-9889 Y | [1] | PUSH ARM GP-STABILIZER | ||
| 106-7364 Y | [1] | TRUNNION GP-BULLDOZER | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER | ||
| (BACK OF MOLDBOARD-NEAR TOP AT RH END.) | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25180625
8E-9448: BULLDOZER AR-SEMI-UNIVERSAL
8E-9448 BULLDOZER AR-SEMI-UNIVERSAL
S/N 1LP1-99999
SEMI-UNIVERSAL
AN ATTACHMENT
S/N 1LP1-99999
SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 102-6345 Y | [1] | BLADE GP-SEMI-UNIVERSAL | ||
| 104-3152 Y | [1] | CYLINDER & LINES GP (LH) | ||
| 104-3150 Y | [1] | CYLINDER & LINES GP (RH) | ||
| 104-3154 Y | [1] | LIGHTING GP-FLOOD | ||
| 8E-9890 Y | [1] | LINES GP-TILT CYLINDER | ||
| 9J-7623 Y | [1] | MOUNTING GP-CYLINDER | ||
| 8E-9889 Y | [1] | PUSH ARM GP-STABILIZER | ||
| 106-7364 Y | [1] | TRUNNION GP-BULLDOZER | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER | ||
| (BACK OF MOLDBOARD-NEAR TOP AT RH END) | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25180626
108-8280: BULLDOZER AR-UNIVERSAL
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 106-7365 Y | [1] | BLADE GP-UNIVERSAL | ||
| 8E-9890 Y | [1] | LINES GP-TILT CYLINDER | ||
| 8E-9889 Y | [1] | PUSH ARM GP-STABILIZER | ||
| 106-7364 Y | [1] | TRUNNION GP-BULLDOZER | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER | ||
| (BACK OF MOLDBOARD-NEAR TOP AT RH END) | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25180627
8E-9449: BULLDOZER AR-UNIVERSAL
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 106-7365 Y | [1] | BLADE GP-UNIVERSAL | ||
| 104-3152 Y | [1] | CYLINDER & LINES GP (LH) | ||
| 104-3150 Y | [1] | CYLINDER & LINES GP (RH) | ||
| 104-3154 Y | [1] | LIGHTING GP-FLOOD | ||
| 8E-9890 Y | [1] | LINES GP-TILT CYLINDER | ||
| 9J-7623 Y | [1] | MOUNTING GP-CYLINDER | ||
| 8E-9889 Y | [1] | PUSH ARM GP-STABILIZER | ||
| 106-7364 Y | [1] | TRUNNION GP-BULLDOZER | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER | ||
| (BACK OF MOLDBOARD-NEAR TOP AT RH END.) | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25180628
114-0978: CONVERSION AR
For full view, you need register
Parts for your D9R TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP25180629
7T-6040: COVER GP-TRUNNION
For full view, you need register
