ENGINE ARRANGEMENT
ENGINE ARSERVICE EQUIPMENT AND SUPPLIES
KIT-REBUILDBASIC ENGINE
CRANKSHAFT GPSERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITSBASIC ENGINE
LIFTING GP-ENGINECYLINDER BLOCK GP
ENGINE ARRANGEMENT
ENGINE AR#SEBP25200080
480-7894: KIT-ENGINE GASKET
480-7894 KIT-ENGINE GASKET
S/N 1SS1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE
PART OF 481-1239 KIT-ENGINE OVERHAUL
FIELD INSTALLATION
S/N 1SS1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE
PART OF 481-1239 KIT-ENGINE OVERHAUL
FIELD INSTALLATION
For full view, you need register
Parts for your 3406C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2N-8204 | [6] | GASKET | ||
| 2N-8630 | [2] | GASKET | ||
| 7C-0307 | [1] | GASKET | ||
| 7M-7273 | [1] | GASKET | ||
| 4N-7253 | [6] | GASKET-CHAMBER | ||
| 6I-3066 | [1] | GASKET-CYLINDER HEAD | ||
| 129-9452 | [6] | GASKET-EXHAUST MANIFOLD | ||
| 1S-4810 | [1] | GASKET-OIL DRAIN | ||
| 1S-6595 | [1] | GASKET-OIL SUPPLY | ||
| 6I-4024 | [1] | GASKET-PLATE | ||
| 4N-1156 | [2] | GASKET-REGULATOR COVER | ||
| 391-2167 | [4] | LOCKNUT-FLANGE (3/8X16-THD) | ||
| 5P-5678 D | SEAL (12-M) | |||
| 3E-6772 | [24] | SEAL (WATER) | ||
| 3S-9643 | [1] | SEAL-LIP TYPE | ||
| 3S-5496 | [4] | SEAL-O-RING | ||
| 4L-8337 | [2] | SEAL-O-RING | ||
| 5S-1188 | [2] | SEAL-O-RING | ||
| 6V-3251 | [1] | SEAL-O-RING | ||
| 6V-3831 | [1] | SEAL-O-RING | ||
| 7L-4774 | [6] | SEAL-O-RING | ||
| 8C-5196 | [2] | SEAL-O-RING | ||
| 464-0509 | [6] | SEAL-O-RING | ||
| 109-0072 | [2] | SEAL-O-RING | ||
| 109-0073 | [1] | SEAL-O-RING | ||
| 114-2687 | [1] | SEAL-O-RING | ||
| 203-3940 | [6] | SEAL-O-RING | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 194-8124 | [6] | SLEEVE AS (EXHAUST PORT) | ||
| 516-5987 | [4] | STUD-TAPERLOCK (3/8-16X1.77-IN) | ||
| 8H-9204 | [6] | WASHER-FELT (19/32X7/8X5/16-IN THK) | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
| D | ORDER BY THE METER | |||
#SEBP25200081
434-4988: KIT-ENGINE OVERHAUL
434-4988 KIT-ENGINE OVERHAUL -MAJOR REPAIR
S/N 1SS270-UP
FOR USE WITH @@@@@177-8877@@@@@, @@@@@177-8874@@@@@, @@@@@177-8878@@@@@, @@@@@177-8879@@@@@, @@@@@177-8880@@@@@, @@@@@177-8876@@@@@, @@@@@177-8873@@@@@, 4P-1987
ALSO FIELD INSTALLATION
S/N 1SS270-UP
FOR USE WITH @@@@@177-8877@@@@@, @@@@@177-8874@@@@@, @@@@@177-8878@@@@@, @@@@@177-8879@@@@@, @@@@@177-8880@@@@@, @@@@@177-8876@@@@@, @@@@@177-8873@@@@@, 4P-1987
ALSO FIELD INSTALLATION
For full view, you need register
Parts for your 3406C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 434-0877 Y | [1] | KIT-AFTERCOOLER GASKET | ||
| 434-1858 Y | [1] | KIT-CYLINDER HEAD GASKET (SINGLE) | ||
| 434-2402 Y | [1] | KIT-FRONT COVER GASKET | ||
| 433-7712 Y | [1] | KIT-FUEL SYSTEM GASKET | ||
| 232-3679 Y | [1] | KIT-GASKET (REAR STRUCTURE) | ||
| 433-7869 Y | [1] | KIT-GASKET (EXPANSION TANK) | ||
| 434-5056 Y | [1] | KIT-GASKET (CENTRAL, LOWER STRUCTURE) | ||
| 434-4989 Y | [1] | KIT-OIL SYSTEM GASKET (OIL COOLER, LINES) | ||
| 3G-2292 | [5] | BOLT-LOCKING (3/8-16X0.87-IN) | ||
| 126-1756 | [4] | BOLT-LOCKING (5/16-18X0.875-IN) | ||
| 9Y-2988 | [1] | BREATHER AS (CRANKCASE) | ||
| 113-5262 AB | [1] | BREATHER AS (CRANKCASE) | ||
| (OPTIONAL SERVICE REPLACEMENT BLACK ENGINE DRESS UP) | ||||
| 4N-0685 | [6] | BUSHING (1-IN WIDE) | ||
| 4N-6658 | [1] | BUSHING (1.3-IN WIDE) | ||
| 131-7123 | [1] | BUSHING | ||
| 2H-1193 | [1] | FERRULE | ||
| 1R-1808 | [1] | FILTER-ENGINE OIL (ADVANCED EFFICIENCY) | ||
| 1R-0749 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY) | ||
| 2N-2766 | [12] | LOCKNUT (3/8-16-THD) | ||
| 100-7399 | [2] | PLUG | ||
| 392-9208 | [2] | PLUNGER-VALVE (RELIEF) | ||
| 248-5513 | [1] | REGULATOR-TEMPERATURE (92-DEG C) | ||
| 4N-8150 | [2] | SPRING | ||
| 305-6843 | [12] | SPRING-GUIDE | ||
| 4S-6137 | [1] | STUD-TAPERLOCK (3/8-16X3.1-IN) | ||
| 106-1792 | [11] | STUD-TAPERLOCK (3/8-16X4-IN) | ||
| 5M-2894 | [12] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSISST, PLEASE VISIT | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25200082
481-1222: KIT-ENGINE OVERHAUL
481-1222 KIT-ENGINE OVERHAUL -MAJOR REPAIR
S/N 1SS1-UP
FOR USE WITH 3406 ELECTRIC POWER GENERATOR
FIELD INSTALLATION
S/N 1SS1-UP
FOR USE WITH 3406 ELECTRIC POWER GENERATOR
FIELD INSTALLATION
For full view, you need register
Parts for your 3406C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 479-8009 Y | [1] | KIT-ENGINE GASKET (SINGLE CYLINDER HEAD) | ||
| 479-8076 Y | [1] | KIT-ENGINE GASKET (REAR COVER) | ||
| 479-8316 Y | [1] | KIT-ENGINE GASKET (OIL COOLER, LINES) | ||
| 479-8419 Y | [1] | KIT-ENGINE GASKET (FRONT COVER) | ||
| 480-5061 Y | [1] | KIT-ENGINE GASKET (CENTRAL, LOWER STRUCTURE) | ||
| 3G-2292 | [5] | BOLT-LOCKING (3/8-16X0.87-IN) | ||
| 126-1756 | [4] | BOLT-LOCKING (5/16-18X0.875-IN) | ||
| 9Y-2988 | [1] | BREATHER AS (CRANKCASE) | ||
| 113-5262 AB | BREATHER AS (CRANKCASE) | |||
| (ABOVE PART IS AN OPTIONAL BLACK ENGINE DRESS-UP.) | ||||
| 4N-0685 | [6] | BUSHING (1-IN WIDE) | ||
| 4N-6658 | [1] | BUSHING (1.3-IN WIDE) | ||
| 131-7123 | [1] | BUSHING | ||
| 1R-1808 | [1] | FILTER-ENGINE OIL (ADVANCED EFFICIENCY) | ||
| 1R-0749 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY) | ||
| 1P-0436 | [1] | GASKET (FUEL PRIMING PUMP) | ||
| 6L-3528 | [1] | GASKET | ||
| 7W-0688 | [1] | GASKET | ||
| 153-5484 | [2] | GASKET | ||
| 392-9208 | [2] | PLUNGER-VALVE (RELIEF) | ||
| 248-5513 | [1] | REGULATOR-TEMPERATURE (92-DEG C)(WATER, COOLANT) | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 2N-3350 | [1] | SEAL-O-RING | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-8997 | [1] | SEAL-O-RING | ||
| 5P-5846 | [1] | SEAL-O-RING | ||
| 5P-7204 | [2] | SEAL-O-RING | ||
| 6V-3251 | [1] | SEAL-O-RING | ||
| 6V-9027 | [1] | SEAL-O-RING | ||
| 109-0078 | [2] | SEAL-O-RING | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 291-8145 | [1] | SEAL-O-RING | ||
| 4N-8150 | [2] | SPRING | ||
| 305-6843 | [12] | SPRING-GUIDE | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25200083
481-1239: KIT-ENGINE OVERHAUL
481-1239 KIT-ENGINE OVERHAUL -MAJOR REPAIR
S/N 1SS1-UP
FOR USE WITH 3406 ELECTRIC POWER GENERATOR
FIELD INSTALLATION
S/N 1SS1-UP
FOR USE WITH 3406 ELECTRIC POWER GENERATOR
FIELD INSTALLATION
For full view, you need register
Parts for your 3406C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 479-8076 Y | [1] | KIT-ENGINE GASKET (REAR COVER) | ||
| 479-8316 Y | [1] | KIT-ENGINE GASKET (OIL COOLER, LINES) | ||
| 479-8419 Y | [1] | KIT-ENGINE GASKET (FRONT COVER) | ||
| 480-5061 Y | [1] | KIT-ENGINE GASKET (CENTRAL, LOWER STRUCTURE) | ||
| 480-7894 Y | [1] | KIT-ENGINE GASKET (SINGLE CYLINDER HEAD) | ||
| 3G-2292 | [5] | BOLT-LOCKING (3/8-16X0.87-IN) | ||
| 5D-9844 | [1] | BOLT-LOCKING (3/8-16X2-IN) | ||
| 031-0219 | [11] | BOLT-LOCKING (3/8-16X1.75-IN) | ||
| 126-1756 | [4] | BOLT-LOCKING (5/16-18X0.875-IN) | ||
| 9Y-2988 | [1] | BREATHER AS (CRANKCASE) | ||
| 4N-0685 | [6] | BUSHING (1-IN WIDE) | ||
| 4N-6658 | [1] | BUSHING (1.3-IN WIDE) | ||
| 131-7123 | [1] | BUSHING | ||
| 1R-1808 | [1] | FILTER-ENGINE OIL (ADVANCED EFFICIENCY) | ||
| 1R-0749 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY) | ||
| 1P-0436 | [1] | GASKET (FUEL PRIMING PUMP) | ||
| 144-0482 | [1] | GASKET | ||
| 391-2167 | [12] | LOCKNUT-FLANGE (3/8X16-THD) | ||
| 100-7399 | [2] | PLUG | ||
| 392-9208 | [2] | PLUNGER-VALVE (RELIEF) | ||
| 248-5513 | [1] | REGULATOR-TEMPERATURE (92-DEG C) | ||
| 2N-3350 | [1] | SEAL-O-RING | ||
| 3J-7354 | [2] | SEAL-O-RING | ||
| 4J-8997 | [1] | SEAL-O-RING | ||
| 5P-5846 | [1] | SEAL-O-RING | ||
| 5P-7813 | [2] | SEAL-O-RING | ||
| 8J-4351 | [2] | SEAL-O-RING | ||
| 109-3206 | [1] | SEAL-O-RING | ||
| 109-9685 | [1] | SEAL-O-RING | ||
| 131-3719 | [6] | SEAL-O-RING | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 9X-7715 | [1] | SEAL-QUAD RING | ||
| 4N-8150 | [2] | SPRING | ||
| 305-6843 | [12] | SPRING-GUIDE | ||
| 4S-6137 | [1] | STUD-TAPERLOCK (3/8-16X3.1-IN) | ||
| 6L-7442 | [6] | STUD-TAPERLOCK (5/16-18X1.08-IN) | ||
| 106-1792 | [11] | STUD-TAPERLOCK (3/8-16X4-IN) | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEAE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25200084
180-5426: KIT-ENGINE REPAIR
For full view, you need register
Parts for your 3406C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7W-7031 Y | [3] | NOZZLE GP-UNIT INJECTOR | ||
| 108-6633 Y | [1] | PUMP GP-FUEL INJECTION | ||
| 178-1318 | [1] | ADAPTER AS | ||
| 7C-4301 | [1] | LINE AS-FUEL INJECTION (CYL NO.1) | ||
| 7C-4302 | [1] | LINE AS-FUEL INJECTION (CYL NO.2) | ||
| 7C-4303 | [1] | LINE AS-FUEL INJECTION (CYL NO.3) | ||
| 7C-4304 | [1] | LINE AS-FUEL INJECTION (CYL NO.4) | ||
| 7C-4305 | [1] | LINE AS-FUEL INJECTION (CYL NO.5) | ||
| 7C-4306 | [1] | LINE AS-FUEL INJECTION (CYL NO.6) | ||
| 185-2831 | [1] | LINE AS-FUEL INJECTION | ||
| 8L-2779 | [1] | SEAL-O-RING | ||
| 9L-5854 | [1] | BAND-FILLER (130.2-MM ID) | ||
| 328-5574 | [1] | BEARING-CONNECTING ROD | ||
| 211-0592 | [1] | BEARING-MAIN (STANDARD) | ||
| 4W-5698 AB | BEARING-MAIN (0.63-MM US) | |||
| 4W-5699 AB | BEARING-MAIN (1.27-MM US) | |||
| 4W-5700 AB | BEARING-MAIN (0.63-MM OS) | |||
| 4W-5701 AB | BEARING-MAIN (0.63-MM OS, 0.63-MM US) | |||
| 4P-8495 | [1] | BUSHING (CONNECTING ROD) | ||
| 3P-1323 | [2] | BOLT-BEARING CAP (7/8-14X7.75-IN) | ||
| 6N-8942 | [2] | BOLT-CONNECTING ROD | ||
| 4N-1151 | [1] | GASKET | ||
| 122-7374 | [6] | GUIDE-VALVE (STANDARD) | ||
| 121-9859 AB | GUIDE-VALVE (0.13-MM OS) | |||
| 121-9860 AB | GUIDE-VALVE (0.51-MM OS) | |||
| 1W-5283 | [4] | INSERT-VALVE SEAT (EXHAUST) | ||
| 7C-5353 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
| 7C-5354 AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
| 4N-5893 | [2] | INSERT-VALVE SEAT (INLET) | ||
| 7C-7602 AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
| 7C-7603 AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
| 7C-7604 AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
| 7C-7605 AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
| 2A-4429 | [12] | LOCK-RETAINER | ||
| 8L-3441 | [2] | NUT (9/16-18-THD) | ||
| 8N-1608 | [1] | PIN-PISTON | ||
| 253-1752 | [2] | PLATE-THRUST | ||
| 7W-2315 | [3] | RETAINER | ||
| 7E-5665 | [2] | RETAINER-PIN | ||
| 134-3761 | [1] | RING-PISTON (TOP) | ||
| 2P-2817 | [1] | RING-PISTON (INTERMEDIATE) | ||
| 7N-7078 | [1] | RING-PISTON (OIL CONTROL) | ||
| 4W-2474 | [6] | ROTOCOIL AS | ||
| 110-2220 | [1] | SEAL-LINER | ||
| 142-7072 | [1] | SEAL-LINER | ||
| 142-6217 | [1] | SEAL-O-RING | ||
| 4W-2471 | [6] | SPRING-VALVE (OUTER) | ||
| 4W-2472 | [6] | SPRING-VALVE (INNER) | ||
| 115-2367 | [4] | VALVE-EXHAUST | ||
| 115-2368 | [2] | VALVE-INLET | ||
| 9H-1031 | [2] | WASHER-HARD (24X41.5X6-MM THK) | ||
| 223-3345 | [1] | KIT-GASKET (SINGLE CYLINDER HEAD) | ||
| (INCLUDES GASKETS, SEALS & WASHERS) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25200085
4P-9348: KIT-ENGINE REPAIR
For full view, you need register
Parts for your 3406C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4W-7018 Y | [3] | INJECTOR GP-FUEL | ||
| 108-6633 Y | [1] | PUMP GP-FUEL INJECTION | ||
| 178-1318 | [1] | ADAPTER AS | ||
| 7C-4301 | [1] | LINE AS-FUEL INJECTION (CYL NO.1) | ||
| 7C-4302 | [1] | LINE AS-FUEL INJECTION (CYL NO.2) | ||
| 7C-4303 | [1] | LINE AS-FUEL INJECTION (CYL NO.3) | ||
| 7C-4304 | [1] | LINE AS-FUEL INJECTION (CYL NO.4) | ||
| 7C-4305 | [1] | LINE AS-FUEL INJECTION (CYL NO.5) | ||
| 7C-4306 | [1] | LINE AS-FUEL INJECTION (CYL NO.6) | ||
| 185-2831 | [1] | LINE AS-FUEL INJECTION | ||
| 4W-2474 | [6] | ROTOCOIL AS | ||
| 9L-5854 | [1] | BAND-FILLER (130.2-MM ID) | ||
| 328-5574 | [1] | BEARING-CONNECTING ROD (STANDARD) | ||
| 4W-5702 AB | BEARING-CONNECTING ROD (0.635-MM US) | |||
| 4W-5703 AB | BEARING-CONNECTING ROD (1.27-MM US) | |||
| 211-0592 | [1] | BEARING-MAIN (STANDARD) | ||
| 4W-5698 AB | BEARING-MAIN (0.63-MM US) | |||
| 4W-5699 AB | BEARING-MAIN (1.27-MM US) | |||
| 4W-5700 AB | BEARING-MAIN (0.63-MM OS) | |||
| 4W-5701 AB | BEARING-MAIN (0.63-MM OS, 0.63-MM US) | |||
| 4P-8380 | [1] | BUSHING | ||
| 3P-1323 | [2] | BOLT-BEARING CAP (7/8-14X7.75-IN) | ||
| 6N-8942 | [2] | BOLT-CONNECTING ROD | ||
| 4N-3661 | [1] | GASKET-OIL PAN | ||
| 122-7374 | [6] | GUIDE-VALVE | ||
| 1W-5283 | [4] | INSERT-VALVE SEAT (EXHAUST) | ||
| 7C-5353 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
| 7C-5354 AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
| 4N-5893 | [2] | INSERT-VALVE SEAT (INLET) | ||
| 7C-5351 AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
| 7C-5352 AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
| 7C-7602 AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
| 7C-7603 AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
| 7C-7604 AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
| 7C-7605 AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
| 2A-4429 | [12] | LOCK-RETAINER | ||
| 8L-3441 | [2] | NUT (9/16-18-THD) | ||
| 8N-1608 | [1] | PIN-PISTON | ||
| 253-1752 | [2] | PLATE-THRUST | ||
| 7W-2315 | [3] | RETAINER | ||
| 7E-5665 | [2] | RETAINER-PIN | ||
| 134-3761 | [1] | RING-PISTON (TOP) | ||
| 2P-2817 | [1] | RING-PISTON (INTERMEDIATE) | ||
| 7N-7078 | [1] | RING-PISTON (OIL CONTROL) | ||
| 110-2220 | [1] | SEAL-LINER (MID) | ||
| 142-7072 | [1] | SEAL-LINER (COOLANT) | ||
| 142-6217 | [1] | SEAL-O-RING | ||
| 4W-2471 | [6] | SPRING-VALVE (OUTER) | ||
| 4W-2472 | [6] | SPRING-VALVE (INNER) | ||
| 115-2367 | [4] | VALVE-EXHAUST | ||
| 115-2368 | [2] | VALVE-INLET | ||
| 9H-1031 | [2] | WASHER-HARD (24X41.5X6-MM THK) | ||
| 223-3345 | [1] | KIT-GASKET (SINGLE CYLINDER HEAD) | ||
| (INCLUDES SEALS, GASKETS, SEAL-O-RINGS, & WASHERS) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25200086
4W-6055: KIT-ENGINE REPAIR
For full view, you need register
Parts for your 3406C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4W-7018 Y | [3] | INJECTOR GP-FUEL | ||
| 108-6633 Y | [1] | PUMP GP-FUEL INJECTION | ||
| 178-1318 | [1] | ADAPTER AS | ||
| 117-1385 | [1] | SEAL-O-RING | ||
| 191-7941 | [1] | LINE AS-FUEL INJECTION (CYL NO.1) | ||
| 191-7942 | [1] | LINE AS-FUEL INJECTION (CYL NO.2) | ||
| 191-7943 | [1] | LINE AS-FUEL INJECTION (CYL NO. 3) | ||
| 191-7944 | [1] | LINE AS-FUEL INJECTION (CYL NO. 4) | ||
| 191-7945 | [1] | LINE AS-FUEL INJECTION (CYL NO. 5) | ||
| 191-7946 | [1] | LINE AS-FUEL INJECTION (CYL NO. 6) | ||
| 185-2831 | [1] | LINE AS-FUEL INJECTION | ||
| 4W-2474 | [6] | ROTOCOIL AS | ||
| 9L-5854 | [1] | BAND-FILLER (130.2-MM ID) | ||
| 328-5574 | [1] | BEARING-CONNECTING ROD | ||
| 211-0592 | [1] | BEARING-MAIN (STANDARD) | ||
| 4W-5698 AB | BEARING-MAIN (0.63-MM US) | |||
| 4W-5699 AB | BEARING-MAIN (1.27-MM US) | |||
| 4W-5700 AB | BEARING-MAIN (0.63-MM OS) | |||
| 4W-5701 AB | BEARING-MAIN (0.63-MM OS, 0.63-MM US) | |||
| 4P-8380 | [1] | BUSHING | ||
| 3P-1323 | [2] | BOLT-BEARING CAP (7/8-14X7.75-IN) | ||
| 6N-8942 | [2] | BOLT-CONNECTING ROD | ||
| 4N-3661 | [1] | GASKET-OIL PAN | ||
| 122-7374 | [6] | GUIDE-VALVE (STANDARD) | ||
| 121-9859 AB | [1] | GUIDE-VALVE (0.13-MM OS) | ||
| 121-9860 AB | [1] | GUIDE-VALVE (0.51-MM OS) | ||
| 1W-5283 | [4] | INSERT-VALVE SEAT (EXHAUST) | ||
| 7C-5353 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
| 7C-5354 AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
| 4N-5893 | [2] | INSERT-VALVE SEAT (INLET) | ||
| 7C-7602 AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
| 7C-7603 AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
| 7C-7604 AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
| 7C-7605 AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
| 223-3345 | [1] | KIT-GASKET (SINGLE CYLINDER HEAD) | ||
| (INCLUDES SEALS, GASKETS, SEAL-O-RINGS & WASHERS) | ||||
| 2A-4429 | [12] | LOCK-RETAINER | ||
| 8L-3441 | [2] | NUT (9/16-18-THD) | ||
| 8N-1608 | [1] | PIN-PISTON | ||
| 253-1752 | [2] | PLATE-THRUST | ||
| 7W-2315 | [3] | RETAINER | ||
| 7E-5665 | [2] | RETAINER-PIN | ||
| 134-3761 | [1] | RING-PISTON (TOP) | ||
| 2P-2817 | [1] | RING-PISTON (INTERMEDIATE) | ||
| 7N-7078 | [1] | RING-PISTON (OIL CONTROL) | ||
| 110-2220 | [1] | SEAL-LINER (MID) | ||
| 142-7072 | [1] | SEAL-LINER (COOLANT) | ||
| 142-6217 | [1] | SEAL-O-RING | ||
| 4W-2471 | [6] | SPRING-VALVE (OUTER) | ||
| 4W-2472 | [6] | SPRING-VALVE (INNER) | ||
| 115-2367 | [4] | VALVE-EXHAUST | ||
| 115-2368 | [2] | VALVE-INLET | ||
| 9H-1031 | [2] | WASHER-HARD (24X41.5X6-MM THK) | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25200087
434-2402: KIT-FRONT COVER GASKET
434-2402 KIT-FRONT COVER GASKET
S/N 1SS270-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER.. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
PART OF 434-4988 KIT-ENGINE OVERHAUL
FIELD REPLACEMENT FOR 233-6728 KIT-GASKET
FOR USE WITH @@@@@177-8877@@@@@, @@@@@177-8874@@@@@, @@@@@177-8878@@@@@, @@@@@177-8879@@@@@, @@@@@177-8880@@@@@, @@@@@177-8876@@@@@, @@@@@177-8873@@@@@
ALSO FIELD INSTALLATION
S/N 1SS270-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER.. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
PART OF 434-4988 KIT-ENGINE OVERHAUL
FIELD REPLACEMENT FOR 233-6728 KIT-GASKET
FOR USE WITH @@@@@177-8877@@@@@, @@@@@177-8874@@@@@, @@@@@177-8878@@@@@, @@@@@177-8879@@@@@, @@@@@177-8880@@@@@, @@@@@177-8876@@@@@, @@@@@177-8873@@@@@
ALSO FIELD INSTALLATION
For full view, you need register
Parts for your 3406C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1W-1898 | [1] | GASKET | ||
| 2W-0459 | [1] | GASKET | ||
| 4H-6145 | [1] | GASKET | ||
| 4N-0933 | [1] | GASKET | ||
| 6B-2250 | [2] | GASKET | ||
| 7W-5733 | [1] | GASKET | ||
| 197-3866 | [1] | GASKET | ||
| 166-9142 | [1] | GASKET | ||
| 166-9146 | [1] | GASKET | ||
| 142-5867 | [1] | SEAL-CRANKSHAFT (FRONT) | ||
| 175-7896 | [1] | SEAL-O-RING | ||
| 6V-3319 | [1] | SEAL-O-RING | ||
| 109-0077 | [1] | SEAL-O-RING | ||
| 122-3772 | [1] | SEAL-O-RING | ||
| 147-0182 | [2] | SEAL-O-RING | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 230-3728 | [1] | SEAL-O-RING | ||
| 4W-2754 | [1] | SEAL-QUAD RING | ||
| 9X-7715 | [1] | SEAL-QUAD RING | ||
| 4W-0435 | [1] | SEAL-QUAD RING | ||
| 4W-4616 | [1] | SEAL-QUAD RING | ||
| FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
#SEBP25200088
4N-1331: LIFTING GP-ENGINE
4N-1331 LIFTING GP-ENGINE
S/N 1SS1-UP
S/N 1SS1-UP
For full view, you need register
Parts for your 3406C MARINE ENGINE:
CATERPILLAR SIS#SEBP25200089
159-9778: LINER-CYLINDER BLOCK
159-9778 LINER-CYLINDER BLOCK
S/N 1SS1-UP
LINER FEATURES SLIGHTLY INCREASED NOMINAL SIZE INSIDE DIAMETER
FIELD INSTALLATION
S/N 1SS1-UP
LINER FEATURES SLIGHTLY INCREASED NOMINAL SIZE INSIDE DIAMETER
FIELD INSTALLATION
For full view, you need register
Parts for your 3406C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
Information:
ENGINE ARRANGEMENT
ENGINE AR
Truck Engine News
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Engine News
A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/01
2001/01/01
Contamination Control Guidelines for Marine Engine Rebuilds, Repair, and/or Overhauls {1000}
2010/10/18
2010/10/18
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Special Instruction
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Installation of the Fuel Consumption Monitoring System for All Commercial Diesel Engines {1250, 1400, 1900, 7490}
Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Service Letter-NACD
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Specifications
Tool Operating Manual
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}
NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}
NEHS1207 Using the 464-1090 Marine Sea Trial Group with the MultiTool {0374, 0599, 0701, 0709}
Service Letter-China
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Contamination Control Guidelines
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Applied Failure Analysis
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Information Release Memo
Service Letter-APD
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Product Support Program For Installing A New Voltage Regulator In Certain Engine Generator Sets
Technical Analysis
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Marine Engine {0372, 1000, 7000, 753S, 7565}
Service Magazine
A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2000/12/25
2000/12/25
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
Caterpillar Parts SIS Catalog 3406C :
Truck sale:
65,000
Caterpillar 3406C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
43,000
Caterpillar 3406C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
