BASIC ENGINE
PULLEY GPVALVE MECHANISM GP
CRANKSHAFT GP
SHAFT GP-STUB
MOUNTING GP-ENGINE
VALVE MECHANISM GP
COOLING SYSTEM
COOLER GPBASIC ENGINE
PULLEY GP
#SEBP25200100
6N-7381: PULLEY GP-AUXILIARY DRIVE
6N-7381 PULLEY GP-AUXILIARY DRIVE
S/N 1SS1-UP
8 INCH DIAMETER
AN ATTACHMENT
S/N 1SS1-UP
8 INCH DIAMETER
AN ATTACHMENT
For full view, you need register
Parts for your 3406C MARINE ENGINE:
CATERPILLAR SIS#SEBP25200101
4N-1045: ROCKER ARM GP
For full view, you need register
Parts for your 3406C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 006-7403 | [2] | RING-RETAINING | |
| 2. | 2N-7228 | [2] | WASHER (1X1.5X0.03-IN THK) | |
| 3. | 4N-0955 | [2] | DOWEL | |
| 4. | 2N-7229 | [2] | SPRING | |
| 5. | 4N-0839 | [1] | SHAFT AS-ROCKER ARM | |
| 5A. | 0L-1022 | [2] | PLUG-CUP | |
| 6. | 2N-7228 B | [2] | WASHER (1X1.5X0.03-IN THK) | |
| 7. | 9Y-4384 | [2] | BRACKET-SHAFT | |
| 8. | 4N-5614 | [6] | ROCKER ARM AS | |
| 9. | 9Y-4383 | [1] | BRACKET-SHAFT | |
| 10. | 108-5603 | [6] | SCREW (3/8-24X1.67-IN) | |
| 11. | 9L-7712 | [6] | NUT (3/8-24-THD) | |
| B | USE AS REQUIRED | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP25200102
319-0785: SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT -REAR
S/N 1SS1-UP
PART OF 4N-0741 CRANKSHAFT GP
FOR USE WITH CCW ROTATION
S/N 1SS1-UP
PART OF 4N-0741 CRANKSHAFT GP
FOR USE WITH CCW ROTATION
For full view, you need register
Parts for your 3406C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 142-5868 J | [1] | SEAL-CRANKSHAFT (REAR) | |
| CRANKSHAFT SEAL 366-6004 IS AVAILABLE FOR FLOODED CONDITIONS | ||||
| J | FOR USE WITH DRY CLUTCH APPLICATIONS | |||
#SEBP25200103
319-7401: SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT -FRONT
S/N 1SS1-UP
PART OF 4N-0741 CRANKSHAFT GP
FOR USE WITH CW ROTATION
S/N 1SS1-UP
PART OF 4N-0741 CRANKSHAFT GP
FOR USE WITH CW ROTATION
For full view, you need register
Parts for your 3406C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 142-5867 | [1] | SEAL-CRANKSHAFT (FRONT) |
#SEBP25200104
156-6906: SHAFT GP-STUB
156-6906 SHAFT GP-STUB
S/N 1SS1-UP
CANNOT BE USED WITH WITH FRONT POWER TAKEOFF, FRONT HYDRAULIC PUMP DRIVE ADAPTER OR DAMPER GUARD
AN ATTACHMENT
S/N 1SS1-UP
CANNOT BE USED WITH WITH FRONT POWER TAKEOFF, FRONT HYDRAULIC PUMP DRIVE ADAPTER OR DAMPER GUARD
AN ATTACHMENT
For full view, you need register
#SEBP25200105
4N-4286: SUPPORT GP-ENGINE
4N-4286 SUPPORT GP-ENGINE -REAR
S/N 1SS1-UP
FOR USE WITH SAE NO. 0 OR NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT
S/N 1SS1-UP
FOR USE WITH SAE NO. 0 OR NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT
For full view, you need register
Parts for your 3406C MARINE ENGINE:
CATERPILLAR SIS#SEBP25200106
9Y-1856: SUPPORT GP-ENGINE
9Y-1856 SUPPORT GP-ENGINE -FRONT
S/N 1SS1-UP
S/N 1SS1-UP
For full view, you need register
Parts for your 3406C MARINE ENGINE:
CATERPILLAR SIS#SEBP25200107
4W-2461: VALVE MECHANISM GP
4W-2461 VALVE MECHANISM GP -ENGINE
S/N 1SS1-UP
S/N 1SS1-UP
For full view, you need register
Parts for your 3406C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4N-1045 Y | [2] | ROCKER ARM GP | |
| 2. | 101-1818 | [6] | BRIDGE AS-EXHAUST | |
| (EACH INCLUDES) | ||||
| 2A. | 2N-5842 | [1] | SCREW (3/8-24X1-IN) | |
| 2B. | 9L-7712 | [1] | NUT (3/8-24-THD) | |
| 3. | 5H-1504 | [6] | WASHER-HARD (20X33.5X5-MM THK) | |
| 4. | 2P-9845 | [6] | BOLT (3/4-16X11.5-IN) | |
| 5. | 4W-5998 | [12] | PUSHROD AS | |
| 6. | 305-6843 | [12] | SPRING-GUIDE | |
| 7. | 422-3883 | [12] | LIFTER AS-VALVE | |
| 8. | 101-1816 | [6] | BRIDGE AS-VALVE (INLET) | |
| (EACH INCLUDES) | ||||
| 8A. | 2N-5842 | [1] | SCREW (3/8-24X1-IN) | |
| 8B. | 9L-7712 | [1] | NUT (3/8-24-THD) | |
| 8C. | 4N-5607 | [1] | SEAT-WEAR | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25200108
121-2471: BASE GP-OIL FILTER
121-2471 BASE GP-OIL FILTER -ENGINE
S/N 1SS1-237
PART OF 121-2472 FILTER GP-ENGINE OIL
S/N 1SS1-237
PART OF 121-2472 FILTER GP-ENGINE OIL
For full view, you need register
Parts for your 3406C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 176-1363 CY | [1] | BASE GP-OIL FILTER (ENGINE) | |
| 2. | 183-3407 | [1] | PLUG AS | |
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 3. | 386-6214 | [1] | ADAPTER AS | |
| 5P-3501 | [1] | ADAPTER | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 4. | 319-6234 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-9334 | [1] | PLUG (1 5/16-12-THD) | ||
| 238-5084 | [1] | SEAL-O-RING | ||
| 5. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 6. | 392-9208 | [2] | PLUNGER-VALVE (RELIEF) | |
| 7. | 4N-8150 | [2] | SPRING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25200109
154-4324: BASE GP-OIL FILTER
154-4324 BASE GP-OIL FILTER -ENGINE
S/N 1SS237-245
PART OF 154-4326 FILTER GP-ENGINE OIL
S/N 1SS237-245
PART OF 154-4326 FILTER GP-ENGINE OIL
For full view, you need register
Information:
BASIC ENGINE
PULLEY GP
Engine News
Specifications
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Caterpillar Parts SIS Catalog 3406C :
Truck sale:
65,000
Caterpillar 3406C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
43,000
Caterpillar 3406C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
