AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

122-2245 CYLINDER BLOCK AS S/N 1TS1-UP PART OF 110-3779 CYLINDER BLOCK AS, 124-7507 CYLINDER BLOCK GP 3408C


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP

MARINE ENGINE 3408C MARINE ENGINE 1TS
 3408C Marine Auxiliary & Generator Set Engine 1TS00001-UP SEBP2522 3408C 1TS   (1996)

BASIC ENGINE

CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
4N-6866 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK AS
110-3779 CYLINDER BLOCK AS
CYLINDER BLOCK AS
122-2245 CYLINDER BLOCK AS
CYLINDER BLOCK GP
124-7507 CYLINDER BLOCK GP
CYLINDER BLOCK GP
1W-5082 CYLINDER BLOCK GP
442-5359 KIT-CYLINDER PACK
 

#SEBP25220020
 

122-2245: CYLINDER BLOCK AS

122-2245 CYLINDER BLOCK AS
S/N 1TS1-UP
PART OF 110-3779 CYLINDER BLOCK AS, 124-7507 CYLINDER BLOCK GP
i00093583 SEBP2522
1222245 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 3408C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 485-1966 [5] CAP-CRANKSHAFT  
2. 3P-1323 [10] BOLT-BEARING CAP (7/8-14X7.75-IN)  
3. 4N-6658 [2] BUSHING (1.3-IN WIDE)  
4. 4N-0685 [3] BUSHING (1-IN WIDE)  
5. 9H-1031 [10] WASHER-HARD (24X41.5X6-MM THK)  
6. 7W-6492 [2] PLUG-PIPE (1/2-14-THD)  
 

#SEBP25220021
 

124-7507: CYLINDER BLOCK GP

124-7507 CYLINDER BLOCK GP
S/N 1TS1-UP
FIELD INSTALLATION
i00093588 SEBP2522
1247507 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3408C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-6534 [6] PLUG-PIPE  
2. 9S-4190 [4] PLUG-O-RING (7/8-14-THD)  
  114-4427 [4] SEAL-O-RING  
3. 8T-6757 [7] PLUG-PIPE  
4. 7W-6492 [2] PLUG-PIPE (1/2-14-THD)  
5. 122-2245 Y [1] CYLINDER BLOCK AS  
6. 3S-6605 [2] PLUG-CUP  
7. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
8. 3B-0645 [1] PLUG-CUP  
9. 7C-9614 [3] PLUG-TAPERLOCK (1-5/8-12-THD)  
10. 8T-6763 [4] PLUG-PIPE (1/4-18-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25220022
 

1W-5082: CYLINDER BLOCK GP

1W-5082 CYLINDER BLOCK GP
S/N 1TS1-UP
i00107807 SEBP2522
1W5082 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3408C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-4990 [8] JET AS-PISTON COOLING  
2. 4N-1650 [4] DOWEL  
3. 8T-6763 [4] PLUG-PIPE (1/4-18-THD)  
4. 110-3779 CY [1] CYLINDER BLOCK AS  
5. 8T-6757 [7] PLUG-PIPE  
6. 6N-9133 [2] GASKET-PLATE  
7. 6I-4613 [2] PLATE-SPACER  
8. 4N-0693 [3] PLUG-TAPERLOCK (1-1/2-12-THD)  
  7C-9614 B [3] PLUG-TAPERLOCK (1-5/8-12-THD)  
9. 4N-0683 [4] DOWEL  
10. 7E-6479 [8] BOLT-SPECIAL (OIL JET)  
11. 3B-0645 [1] PLUG-CUP  
12. 6L-4428 [3] STUD-TAPERLOCK (3/8-16X4.01-IN)  
13. 114-4427 C [2] SEAL-O-RING  
14. 7W-6534 [2] PLUG-PIPE  
15. 5P-8356 [2] SEAL-O-RING  
16. 3S-6605 [2] PLUG-CUP  
17. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
18. 8T-6764 B [1] PLUG-PIPE (1/8-27-THD)  
19. 7C-7407 [1] STUD  
20. 7W-6534 J [1] PLUG-PIPE  
22. 7W-6534 J [1] PLUG-PIPE  
23. 7W-6534 B [1] PLUG-PIPE  
24. 7W-6534 B [1] PLUG-PIPE  
  4W-6061 AFL SLEEVE  
  4W-4588 AFN SLEEVE-LIFTER BORE  
  9Y-3368 AFN INSERT-LINER SEAT (0.822-MM THK)  
  6I-4361 AFN INSERT-LINER SEAT (0.772-MM THK)  
  6I-4362 AFN INSERT-LINER SEAT (0.872-MM THK)  
  2W-3815 AFN INSERT-LINER SEAT (1.605-MM THK)  
  6I-4363 AFN INSERT-LINER SEAT (1.555-MM THK)  
  6I-4364 AFN INSERT-LINER SEAT (1.655-MM THK)  
  5N-0093 AFN INSERT-LINER SEAT (2.71-MM THK)  
  6I-4365 AFN INSERT-LINER SEAT (2.66-MM THK)  
  6I-4366 AFN INSERT-LINER SEAT (2.76-MM THK)  
  101-0523 AFN INSERT-LINER SEAT (5.21-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  J   MOUNTED ON LH SIDE OF CYLINDER BLOCK
  L   FOR SALVAGE OF BOTTOM LINER O-RING BORE, QUANTITY TO BE DETERMINED BY USER
  N   FOR SALVAGE OF DAMAGED CYL BLOCK LIFTER BORES REFER TO SEBF8076 IN SIS WEB
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25220023
 

105-3788: CYLINDER HEAD AS

105-3788 CYLINDER HEAD AS
S/N 1TS1-UP
PART OF 7W-2224 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7W-2225@@@@@
i00093513 SEBP2522
1053788 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3408C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 [6] PLUG-CUP  
2. 4N-5893 [8] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 1W-5283 [8] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 3B-0623 [8] PLUG-CUP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP25220024
 

143-0040: CYLINDER HEAD AS

143-0040 CYLINDER HEAD AS
S/N 1TS467-UP
PART OF 143-0041, 7W-2225 CYLINDER HEAD AS
FIELD REPLACEMENT ORDER @@@@@143-0041@@@@@
i00566895 SEBP2522
1430040 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3408C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 [6] PLUG-CUP  
2. 4N-5893 [8] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 1W-5283 [8] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 3B-0623 [8] PLUG-CUP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP25220025
 

143-0041: CYLINDER HEAD AS

143-0041 CYLINDER HEAD AS
S/N 1TS467-UP
PART OF 141-1207 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@143-0040@@@@@
i00566896 SEBP2522
1430041 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3408C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-0040 Y [1] CYLINDER HEAD AS  
2. 173-7188 [16] GUIDE-VALVE (STANDARD)  
  7C-5306 AB GUIDE-VALVE (0.51-MM OS)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP25220026
 

7W-2225: CYLINDER HEAD AS

7W-2225 CYLINDER HEAD AS
S/N 1TS1-UP
FIELD REPLACEMENT FOR @@@@@105-3788@@@@@
i00093453 SEBP2522
7W2225 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 3408C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-0040 Y [1] CYLINDER HEAD AS  
2. 2N-5775 [8] DOWEL  
3. 173-7188 [16] GUIDE-VALVE (STANDARD)  
  7C-5306 AB GUIDE-VALVE (0.51-MM OS)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP25220027
 

141-1207: CYLINDER HEAD GP

141-1207 CYLINDER HEAD GP
S/N 1TS467-UP
PART OF 273-9999, 4W-7005 CYLINDER HEAD GP
i00567840 SEBP2522
1411207 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3408C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-0041 Y [1] CYLINDER HEAD AS  
2. 122-0322 [8] VALVE-INLET  
3. 2A-4429 [32] LOCK-RETAINER  
4. 6N-7175 [16] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7154 [1] ROTOCOIL AS  
4A. 6N-7174 [1] SHIELD-OIL  
5. 4N-5906 [16] SPRING-VALVE  
6. 122-0321 [8] VALVE-EXHAUST  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25220028
 

273-9999: CYLINDER HEAD GP

273-9999 CYLINDER HEAD GP
S/N 1TS3083-UP
i02425678 SEBP2522
2739999 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3408C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-1207 Y [2] CYLINDER HEAD GP  
3. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 283-5666 [2] GASKET-CYLINDER HEAD  
5. 0L-1352 [7] BOLT (3/8-16X3.25-IN)  
8. 7W-8301 [28] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
  124-1855 [1] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
9. 0L-1352 B [4] BOLT (3/8-16X3.25-IN)  
10. 359-1439 [32] SEAL AS-WATER  
11. 100-6920 [8] ADAPTER-NOZZLE  
12. 7L-4774 [8] SEAL-O-RING  
13. 4N-7253 [8] GASKET-CHAMBER  
14. 106-1792 [16] STUD-TAPERLOCK (3/8-16X4-IN)  
19. 6N-6731 [1] SUPPORT-HOUSING  
20. 6N-6732 [1] SUPPORT-HOUSING  
21. 1A-5183 [2] BOLT (3/8-16X4.75-IN)  
22. 5B-2638 [2] BOLT (3/8-16X5.25-IN)  
23. 1W-5207 [1] BRACKET-FUEL PUMP  
24. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
25. 7W-8071 [1] BRACKET-FUEL PUMP  
26. 8S-9191 [2] BOLT (3/8-16X4-IN)  
28. 0S-1608 [1] BOLT (3/8-16X3.75-IN)  
29. 3B-1915 [1] BOLT (3/8-16X1.375-IN)  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25220029
 

4W-7005: CYLINDER HEAD GP

4W-7005 CYLINDER HEAD GP
S/N 1TS1-466
i00107976 SEBP2522
4W7005 CYLINDER HEAD GP Parts scheme 4W7005 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3408C MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8071 C [1] BRACKET-FUEL PUMP  
2. 3B-1915 C [1] BOLT (3/8-16X1.375-IN)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 0S-1608 C [1] BOLT (3/8-16X3.75-IN)  
5. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
6. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
7. 6N-6731 [1] SUPPORT-HOUSING (LH)  
8. 7E-7308 [2] GASKET-CYLINDER HEAD  
9. 2H-3750 [28] BOLT (3/4-16X7.5-IN)  
10. 5H-1504 [28] WASHER-HARD (20X33.5X5-MM THK)  
11. 7W-2224 Y [2] CYLINDER HEAD GP  
12. 0L-1352 C [7] BOLT (3/8-16X3.25-IN)  
13. 8T-6764 C [1] PLUG-PIPE (1/8-27-THD)  
14. 0L-1352 CB [4] BOLT (3/8-16X3.25-IN)  
15. 4N-0932 B [2] PLUG-CUP  
16. 5P-0063 B [4] PLUG-CUP  
17. 100-6920 C [8] ADAPTER-NOZZLE  
18. 3E-6772 [32] SEAL (WATER)  
19. 106-1792 [16] STUD-TAPERLOCK (3/8-16X4-IN)  
20. 7X-7731 C [2] PLUG-PIPE (3/4-14-THD)  
21. 8T-6762 C [4] PLUG-PIPE (1/2-14-THD)  
22. 4N-7253 [8] GASKET-CHAMBER  
23. 8T-6764 C [1] PLUG-PIPE (1/8-27-THD)  
24. 6N-6732 [1] SUPPORT-HOUSING (RH)  
25. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
26. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
27. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
28. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
29. 8S-9191 [2] BOLT (3/8-16X4-IN)  
30. 1W-5207 [1] BRACKET-FUEL PUMP  
31. 8M-5249 C [8] SEAL-O-RING  
32. 8T-6762 CB [2] PLUG-PIPE (1/2-14-THD)(LH)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Engine News
Flywheel Housing To Cylinder Block Joint Improvements{1157,1201}
1997/01/22
New Block Cover Used{1201}
1999/05/01
Special Instruction
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Technical Information Bulletin
Liner Flange Breakage
Liner Flange Breakage
Specifications
Cylinder Liner
3408C and 3412C Marine Engines
Cylinder Liner Projection
3408C and 3412C Marine Engines
Cylinder Block
3408C and 3412C Marine Engines
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Disassembly and Assembly
Camshaft Bearings
3408C & 3412C MARINE ENGINES
Spacer Plates
3408C & 3412C MARINE ENGINES
Piston Cooling Tubes
3408C & 3412C MARINE ENGINES
Cylinder Liners
3408C & 3412C MARINE ENGINES
Crankshaft Main Bearings
3408C & 3412C MARINE ENGINES
Service Magazine
New 171-4660 Engine Stand Adapter Assembly Is Now Available {0701, 1000}
2000/04/17

Caterpillar Parts SIS Catalog 3408C :

CYLINDER BLOCK AS
110-3779 CYLINDER BLOCK AS
CRANKSHAFT GP
1W-5010 CRANKSHAFT GP
CRANKSHAFT AS
1W-5009 CRANKSHAFT AS
COVER GP-VALVE MECHANISM
8N-2184 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4W-6823 COVER GP-VALVE MECHANISM
COVER GP-OIL PAN
6N-3894 COVER GP-OIL PAN
COVER GP-FRONT HOUSING
4N-6798 COVER GP-FRONT HOUSING
COVER GP-FLYWHEEL HOUSING
4N-7798 COVER GP-FLYWHEEL HOUSING
CYLINDER BLOCK GP
124-7507 CYLINDER BLOCK GP
CYLINDER BLOCK GP
1W-5082 CYLINDER BLOCK GP
CYLINDER HEAD AS
105-3788 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0040 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0041 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2225 CYLINDER HEAD AS
CYLINDER HEAD GP
141-1207 CYLINDER HEAD GP
CYLINDER HEAD GP
273-9999 CYLINDER HEAD GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.