AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

130-7323 GOVERNOR GP-UNIT INJECTOR S/N 4TF24000-UP PART OF 115-9441 GOVERNOR GP ALSO AN ATTACHMENT 325B L


FUEL SYSTEM
GOVERNOR GP
FUEL SYSTEM GP
LINES GP-FUEL
LINES GP-FUEL RATIO CONTROL
GOVERNOR GP
PUMP GP-FUEL TRANSFER

EXCAVATOR 325B L EXCAVATOR 6DN
 325B & 325B LN Excavators 6DN00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2523 325B L 6DN   (1996)

FUEL SYSTEM

GOVERNOR GP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
GOVERNOR GP
115-9441 GOVERNOR GP
113-6190 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
130-7323 GOVERNOR GP-UNIT INJECTOR
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
SUPPORT GP-GOVERNOR CONTROL
123-2381 SUPPORT GP-GOVERNOR CONTROL
 

#SEBP25230140
 

130-7323: GOVERNOR GP-UNIT INJECTOR

130-7323 GOVERNOR GP-UNIT INJECTOR
S/N 4TF24000-UP
PART OF 115-9441 GOVERNOR GP
ALSO AN ATTACHMENT
i00503631 SEBP2523
1307323 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 108-1612 [1] CLEVIS  
3. 6D-9953 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 115-2553 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 108-1613 [1] PISTON-SERVO  
10. 125-8158 [1] SLEEVE-RACK CONTROL  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 5M-2057 [1] SEAL-O-RING  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. 4P-3537 [1] RING-TOLERANCE  
33. 4P-3539 [1] LEVER-THROTTLE  
34. 8T-8895 M [2] SETSCREW-SOCKET (M4X0.7X16-MM)  
35. 4W-6630 [1] LEVER  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 130-7322 [1] HOUSING AS  
40. 2S-4078 [1] SEAL-O-RING  
41. 5C-8312 M [1] NUT (M4X0.7-THD)  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 6V-8189 [1] NUT (5/16-18-THD)  
44. 128-4794 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 6V-5683 M [1] BOLT (M6X1X16-MM)  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
51. 7C-4483 [1] SCREEN AS (OIL INLET)  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. 5C-2874 M [2] NUT (M5X0.8-THD)  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. Z [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
81. 4P-4000 [1] SPRING-LEVER  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP25230141
 

143-4915: KIT-FUEL SYSTEM GASKET

143-4915 KIT-FUEL SYSTEM GASKET
S/N 6DN1-UP; 8FN1-UP
KIT CONTAINS THE GASKET, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL. ENGINE MOUNTED FUEL SYSTEM COMPONENTS. KIT DOES NOT INCLUDE INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED
FIELD INSTALLATION
i06898006 SEBP2523
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
  7E-0844 [1] SEAL  
  1H-8171 [1] SEAL-O-RING  
  1J-9671 [1] SEAL-O-RING  
  3J-1907 [17] SEAL-O-RING  
  1T-1068 [1] SEAL-O-RING  
  3J-7354 [3] SEAL-O-RING  
  4J-5477 [3] SEAL-O-RING  
  4K-1388 [1] SEAL-O-RING  
  5F-7054 [1] SEAL-O-RING  
  5P-7813 [1] SEAL-O-RING  
  5P-7814 [2] SEAL-O-RING  
  6F-6673 [1] SEAL-O-RING  
  6V-4589 [1] SEAL-O-RING  
  6V-8397 [11] SEAL-O-RING  
  6V-9027 [2] SEAL-O-RING  
  114-8718 [6] SEAL-O-RING  
  125-8274 [6] SEAL-O-RING  
  237-7623 [1] SEAL-O-RING  
   
   
    FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP25230142
 

108-9842: LINES GP-FUEL

108-9842 LINES GP-FUEL
S/N 6DN1-UP; 8FN1-UP
PART OF 121-5641, 121-5642 CHASSIS AR
Type 1
i00487730 SEBP2523
1089842 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-2308 Y [1] SEPARATOR GP-WATER  
2. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
3. 103-2529 BE HOSE  
4. 096-5863 [1] GROMMET  
5. 6S-8620 [6] CLAMP-HOSE  
6. 5K-8451 [7] CLIP (LOOP)(15.88MM ID)  
7. 9M-8406 [2] CLIP (LOOP)  
8. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
9. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
10. 7Y-8167 [1] GROMMET (50-MM ID)  
11. 6V-9027 [2] SEAL-O-RING  
12. 1J-9671 [2] SEAL-O-RING  
13. 8T-9357 [2] ADAPTER  
14. 3E-4091 [2] ELBOW  
15. 096-0061 [2] STRAP-CABLE  
16. 5P-1908 E HOSE (25CM)  
17. 096-4035 [1] CLIP  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25230143
 

108-9842: LINES GP-FUEL

108-9842 LINES GP-FUEL
S/N 6DN1-UP; 8FN1-UP
PART OF 121-5641, 121-5642 CHASSIS AR
Type 2
i00904966 SEBP2523
1089842 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-2308 Y [1] SEPARATOR GP-WATER  
2. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
3. 5P-1442 E HOSE (450CM)  
3A. 5P-1442 E HOSE (285CM)  
3B. 5P-1442 E HOSE (510CM)  
4. 096-5863 [1] GROMMET  
5. 095-1386 [7] CLAMP-HOSE  
6. 5K-8451 [7] CLIP (LOOP)  
7. 9M-8406 [3] CLIP (LOOP)  
8. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
9. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
10. 7Y-8167 [1] GROMMET (50-MM ID)  
11. 6V-9027 [2] SEAL-O-RING  
12. 1J-9671 [2] SEAL-O-RING  
13. 8T-9357 [2] ADAPTER  
14. 3E-4091 [2] ELBOW  
15. 096-0061 [2] STRAP-CABLE  
16. 5P-1420 E HOSE (25CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25230144
 

129-1671: LINES GP-FUEL FILTER

129-1671 LINES GP-FUEL FILTER
S/N 4TF24000-UP
PART OF 115-5938, 135-9914, 136-9003 ENGINE AR
ALSO AN ATTACHMENT
i00522894 SEBP2523
1291671 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
2. 129-2145 [1] TUBE AS  
3. 129-1102 Y [1] BASE GP-FUEL FILTER  
4. 6V-8724 [1] ELBOW  
5. 3J-1907 [13] SEAL-O-RING  
6. 129-1672 [1] BRACKET  
7. 6V-8397 [8] SEAL-O-RING  
8. 7X-2459 [2] ADAPTER-TEE  
9. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
10. 9S-4191 [3] PLUG (9/16-18-THD)  
11. 5F-7054 [1] SEAL-O-RING  
12. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
13. 4P-9696 [1] TUBE AS  
14. 7E-5189 [1] VALVE AS (FUEL)  
15. 8T-0151 [1] ADAPTER  
16. 5P-1046 [1] CONNECTOR  
17. 3N-3252 [1] SPRING  
18. 1P-1670 [1] PLUG-SEAL  
19. 5P-7813 [1] SEAL-O-RING  
20. 6V-9850 [1] ELBOW  
21. 129-2146 [1] TUBE AS  
22. 129-2147 [1] TUBE AS  
23. 5M-5689 [2] CLAMP  
24. 5C-2890 M [1] NUT (M6X1-THD)  
25. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
26. 8T-4971 M [1] BOLT (M6X1X30-MM)  
27. 9S-1350 [1] CLIP  
28. 9W-4216 [1] SPACER (9X18X7-MM THK)  
29. 6V-8636 [2] CONNECTOR  
30. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
31. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
32. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
34. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
35. 1R-0753 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
36. 141-8275 [2] VALVE-DRAIN (FUEL)  
37. 5P-4961 [2] CLAMP-HOSE  
38. 103-2529 E HOSE (195CM)  
39. 096-0061 [1] STRAP-CABLE  
40. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25230145
 

130-1105: LINES GP-FUEL FILTER

130-1105 LINES GP-FUEL FILTER
S/N 4TF24000-UP
PART OF 115-5937 ENGINE AR
AN ATTACHMENT
i00597674 SEBP2523
1301105 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
2. 129-2145 [1] TUBE AS  
3. 129-1102 Y [1] BASE GP-FUEL FILTER  
4. 6V-8724 [1] ELBOW  
5. 3J-1907 [13] SEAL-O-RING  
6. 119-2986 [1] COVER  
7. 129-1672 [1] BRACKET  
8. 6V-8397 [8] SEAL-O-RING  
9. 7X-2459 [2] ADAPTER-TEE  
10. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
11. 9S-4191 [3] PLUG (9/16-18-THD)  
12. 5F-7054 [1] SEAL-O-RING  
13. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
14. 4P-9696 [1] TUBE AS  
15. 7E-5189 [1] VALVE AS (FUEL)  
16. 8T-0151 [1] ADAPTER  
17. 5P-1046 [1] CONNECTOR  
18. 3N-3252 [1] SPRING  
19. 1P-1670 [1] PLUG-SEAL  
20. 5P-7813 [1] SEAL-O-RING  
21. 6V-9850 [1] ELBOW  
22. 129-2146 [1] TUBE AS  
23. 129-2147 [1] TUBE AS  
24. 5M-5689 [2] CLAMP  
25. 5C-2890 M [1] NUT (M6X1-THD)  
26. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
27. 8T-4971 M [1] BOLT (M6X1X30-MM)  
28. 9S-1350 [1] CLIP  
29. 9W-4216 [1] SPACER (9X18X7-MM THK)  
30. 6V-8636 [2] CONNECTOR  
31. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
32. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
33. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
34. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
35. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
36. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
37. 095-1388 [2] CLAMP-HOSE  
38. 103-2529 E HOSE (88CM EACH)  
39. 096-0061 [1] STRAP-CABLE  
40. 3P-0657 [1] SEAL-O-RING  
41. 141-8275 [2] VALVE-DRAIN (FUEL)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25230146
 

4P-9693: LINES GP-FUEL RATIO CONTROL

4P-9693 LINES GP-FUEL RATIO CONTROL
S/N 4TF24000-UP
PART OF 115-5937, 115-5938, 135-9914 ENGINE AR
ALSO AN ATTACHMENT
i00373468 SEBP2523
4P9693 LINES GP-FUEL RATIO CONTROL Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8647 [1] CONNECTOR  
2. 6V-8723 [1] ELBOW  
3. 4P-9694 [1] TUBE AS  
4. 3K-0360 [1] SEAL-O-RING  
5. 4J-5477 [1] SEAL-O-RING  
6. 3J-7354 [1] SEAL-O-RING  
7. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
8. 6V-8397 [1] SEAL-O-RING  
9. 8M-2772 [1] CLIP (LOOP)  
 

#SEBP25230147
 

7W-8434: LINES GP-GOVERNOR OIL

7W-8434 LINES GP-GOVERNOR OIL
S/N 4TF24000-UP
PART OF 113-6190 GOVERNOR GP-UNIT INJECTOR
ALSO AN ATTACHMENT
i00187776 SEBP2523
7W8434 LINES GP-GOVERNOR OIL Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8628 [1] ELBOW  
2. 7W-0367 [1] TUBE AS  
3. 6V-8647 [1] CONNECTOR  
4. 3J-7354 [2] SEAL-O-RING  
5. 4J-5477 [2] SEAL-O-RING  
 

#SEBP25230148
 

123-3929: PUMP & MOTOR GP-FUEL TRANSFER

123-3929 PUMP & MOTOR GP-FUEL TRANSFER
S/N 6DN1-UP; 8FN1-UP
PART OF 108-9845 PUMP GP-FUEL TRANSFER
AN ATTACHMENT
i00514215 SEBP2523
1233929 PUMP & MOTOR GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
2. 9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
3. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
 

#SEBP25230149
 

165-1436: PUMP & MOTOR GP-FUEL TRANSFER

165-1436 PUMP & MOTOR GP-FUEL TRANSFER
S/N 6DN1-UP; 8FN1-UP
PART OF 108-9845 PUMP GP-FUEL TRANSFER
AN ATTACHMENT
i00991684 SEBP2523
1651436 PUMP & MOTOR GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 325B L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
2. 9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
3. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
 

Information:

Specifications
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Governor
3114, 3116, 3126 Engines
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Testing and Adjusting
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Governor - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 325B L :

113-6190 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP
115-9441 GOVERNOR GP
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
CONTROL GP-GOVERNOR
132-7806 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
106-0106 CONTROL GP-GOVERNOR
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
319-4243 CABLE GP-GOVERNOR CONTROL
143-4915 KIT-FUEL SYSTEM GASKET
LINES GP-FUEL
108-9842 LINES GP-FUEL
LINES GP-FUEL
108-9842 LINES GP-FUEL
LINES GP-FUEL FILTER
129-1671 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
130-1105 LINES GP-FUEL FILTER
LINES GP-FUEL RATIO CONTROL
4P-9693 LINES GP-FUEL RATIO CONTROL
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
PUMP & MOTOR GP-FUEL TRANSFER
123-3929 PUMP & MOTOR GP-FUEL TRANSFER

Truck sale:

Caterpillar 325BL, Construction
29,000 
Caterpillar 325BL, Construction
- Crawler Excavators
MILTON CAT
 
 
Caterpillar 325BL, Construction
- Crawler Excavators
avspare
Caterpillar 325BL, Construction
43,400 
Caterpillar 325BL, Construction
- Crawler Excavators
N C MACHINERY CO.
Caterpillar 325BL, Construction
31,000 
Caterpillar 325BL, Construction
- Crawler Excavators
WHAYNE SUPPLY COMPANY
CATERPILLAR 325BL 1998
 
CATERPILLAR 325BL 1998
- TRACK EXCAVATORS
WILLIAM ADAMS PTY. LTD.
Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.