OPERATOR STATION
WASHER GP-WINDOWWIPER GP-WINDOW
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSGASKET & SEAL KITS
OPERATOR STATION
WASHER GP-WINDOW
#SEBP25231110
122-4827: WIPER & WASHER GP-WINDOW
122-4827 WIPER & WASHER GP-WINDOW -LOWER
S/N 6DN1-UP; 8FN1-UP
PART OF 121-5643 OPERATOR AR
S/N 6DN1-UP; 8FN1-UP
PART OF 121-5643 OPERATOR AR
For full view, you need register
Parts for your 325B L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6C-8434 | [1] | BLADE AS | |
| 2. | 125-9409 | [1] | BRACKET AS | |
| 3. | 105-3488 M | [4] | BOLT-SOCKET HEAD (M10X1.5X16-MM) | |
| 4. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 5. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 6. | 5C-9553 M | [1] | BOLT (M6X1X16-MM) | |
| 7. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 8. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 9. | 2V-3216 | [1] | CLIP (LOOP) | |
| 10. | 131-0398 | [1] | MOTOR AS-WINDOW WIPER (LOWER) | |
| 11. | 2D-1290 | [1] | GROMMET | |
| 12. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 6C-9221 M | [1] | NUT (M24X1.5-THD) | |
| 14. | 135-0429 | [1] | LINK AS | |
| 15. | 136-5765 | [1] | BOSS | |
| 16. | 8T-4138 M | [3] | BOLT (M6X1X20-MM) | |
| 17. | 6C-9097 M | [1] | NUT (M16X1-THD) | |
| 18. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
| 19. | 129-2149 | [1] | BRACKET AS | |
| 20. | 133-2003 Y | [1] | ARM GP-WINDOW WIPER | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25231111
184-9725: WIPER GP-WINDOW
184-9725 WIPER GP-WINDOW -UPPER & TOP
S/N 6DN1-UP; 8FN1-UP
PART OF 184-9723 CAB GP
AN ATTACHMENT
S/N 6DN1-UP; 8FN1-UP
PART OF 184-9723 CAB GP
AN ATTACHMENT
For full view, you need register
Parts for your 325B L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 124-9271 | [1] | SUPPORT AS | |
| 2. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 3. | 6C-9087 | [2] | WASHER | |
| 4. | 6C-3431 | [1] | ANTENNA | |
| 5. | 131-0327 | [1] | CONVERTER AS (24-VOLT) | |
| 6. | 145-4446 | [1] | CONTROL GP-WASHER & WIPER | |
| 7. | 131-0399 | [1] | MOTOR AS-WINDOW WIPER (UPPER) | |
| 8. | 6C-9129 M | [1] | BOLT (M6X1X40-MM) | |
| 9. | 135-0429 | [1] | LINK AS | |
| 10. | 6C-9221 M | [1] | NUT (M24X1.5-THD) | |
| 11. | 6C-9097 M | [1] | NUT (M16X1-THD) | |
| 12. | 6C-9103 | [1] | BOSS | |
| 13. | 6C-9104 | [1] | CAP-WIPER | |
| 14. | 5C-9553 M | [9] | BOLT (M6X1X16-MM) | |
| 15. | 6C-9130 | [13] | WASHER (6X18X1-MM THK) | |
| 16. | 6C-9142 | [1] | BLADE AS-WIPER | |
| 17. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 18. | 6C-9143 | [1] | ARM AS | |
| 6C-9107 | [1] | NOZZLE-WATER | ||
| 6C-9108 | [1] | HOSE-WATER | ||
| 6C-9109 | [2] | CLIP | ||
| 6C-9110 | [1] | ELBOW | ||
| 19. | 130-6568 | [1] | HARNESS AS | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| 20. | 4I-5049 M | [3] | NUT-SPACER (M6X1-THD) | |
| 21. | 6C-9092 | [2] | WASHER | |
| 22. | 6C-9125 | [1] | ASHTRAY AS | |
| 23. | 143-3422 | [1] | HARNESS AS | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| 24. | 6C-9078 | [9] | WASHER | |
| 25. | 200-8199 | [1] | HARNESS AS-CAB | |
| 26. | 9W-0335 | [1] | LIGHTER AS-CIGAR (24-VOLT) | |
| 27. | 095-0827 | [6] | LOCKWASHER | |
| 28. | 187-6068 | [1] | HOSE | |
| 29. | 6C-9199 | [1] | CAP | |
| 30. | 6C-9089 | [3] | NUT-CAP | |
| 31. | 200-8203 | [3] | NUT-SPECIAL | |
| 32. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 33. | 8T-5400 | [1] | CONNECTOR | |
| 34. | 6C-9119 | [2] | SCREW (M5X0.8X12-MM) | |
| 35. | 3T-6655 | [1] | SWITCH AS-ROTARY (WIPER, WASHER)(TOP WINDOW) | |
| 7T-9302 | [1] | KNOB AS-WIPER SWITCH (WASHER) | ||
| 36. | 130-8110 | [2] | SPACER | |
| 37. | 109-1270 | [4] | GROMMET | |
| 38. | 120-4825 | [2] | GROMMET | |
| 39. | 6C-9121 | [1] | BRACKET AS-LAMP | |
| 40. | 6C-9122 | [2] | LAMP (24-VOLT)(DOME) | |
| 41. | 151-9385 | [1] | MONITOR GP-OPERATOR | |
| 171-2655 | [1] | COVER | ||
| [1] | KIT-BACKUP ALARM | |||
| 42. | 9W-1494 | [1] | KIT-SERVICE METER (24-VOLT) | |
| 43. | 201-1729 | [1] | COVER-MONITOR | |
| 44. | 141-3980 | [1] | SUPPORT AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 45. | 112-3309 | [2] | CLAMP | |
| 46. | 109-1253 | [1] | HOSE | |
| 47. | 109-1254 | [1] | NOZZLE-AIR | |
| 48. | 6C-9058 M | [3] | SCREW (M6X1X12-MM) | |
| 49. | 139-6039 | [3] | NUT-RETAINER (U-TYPE) | |
| 50. | 9X-2044 M | [5] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 51. | 140-9112 | [1] | CLIP | |
| 52. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 53. | 130-8108 | [1] | CAP-SUPPORT | |
| 54. | 124-5679 Y | [1] | MOTOR GP-WINDOW WIPER (TOP) | |
| 55. | 130-8109 | [1] | CAP-WIPER MOTOR | |
| 56. | 124-5686 | [1] | ARM AS | |
| 57. | 119-8344 | [1] | BLADE AS-WIPER | |
| 58. | 145-3706 | [3] | SCREW | |
| 59. | 3S-2093 | [3] | STRAP-CABLE | |
| 60. | 180-9417 | [3] | NUT | |
| 61. | 127-9838 | [1] | CONTROL GP-WASHER & WIPER | |
| 62. | 117-5644 | [2] | BOOT | |
| 63. | 187-6065 | [1] | HOSE | |
| 64. | 117-5645 M | [3] | BOLT (M6X1X20-MM) | |
| 65. | 3E-5239 | [1] | RELAY AS (24-VOLT) | |
| 66. | 6C-9081 | [3] | LOCKWASHER | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25231112
133-8909: FILM GP
133-8909 FILM GP
S/N 6DN1-UP; 8FN1-UP
SINGLE FUNCTION
PART OF 122-4847, 170-2181 CONTROL AR-AUXILIARY
AN ATTACHMENT
S/N 6DN1-UP; 8FN1-UP
SINGLE FUNCTION
PART OF 122-4847, 170-2181 CONTROL AR-AUXILIARY
AN ATTACHMENT
For full view, you need register
#SEBP25231113
139-4039: FILM GP
139-4039 FILM GP
S/N 6DN1-UP; 8FN1-UP
ARCTIC HEATER
PART OF 136-6479 LINES GP-HEATER
AN ATTACHMENT
S/N 6DN1-UP; 8FN1-UP
ARCTIC HEATER
PART OF 136-6479 LINES GP-HEATER
AN ATTACHMENT
For full view, you need register
Parts for your 325B L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 137-6606 | [1] | FILM-IDENTIFICATION (FUEL) | |
| 2. | [1] | FILM-IDENTIFICATION (ENGINE COOLANT HEATER) | ||
| 3. | 137-6608 | [1] | FILM-IDENTIFICATION (HEATER) | |
| 4. | 1Q-1967 | [1] | FILM-WARNING (NO STEP) | |
| 5. | 4S-8264 | [12] | RIVET-POP | |
| 6. | 1Q-2967 | [1] | PLATE-NOTICE (HEATERS) | |
| 7. | 1Q-3072 | [1] | PLATE-IDENTIFICATION (FUEL FIRED HEATER) | |
| 8. | 136-2715 | [1] | PLATE-WARNING (ENGINE COOLANT HEATER) | |
#SEBP25231114
148-0618: FILM GP
For full view, you need register
#SEBP25231115
155-3092: FILM GP
For full view, you need register
Parts for your 325B L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1Q-2967 | [1] | PLATE-NOTICE (HEATERS) | |
| 2. | 1Q-3072 | [1] | PLATE-IDENTIFICATION (FUEL FIRED HEATER) | |
| 3. | 136-2715 | [1] | PLATE-WARNING (ENGINE COOLANT HEATER) | |
| 4. | 1Q-1967 | [1] | FILM-WARNING (NO STEP) | |
| 5. | 4S-8264 | [12] | RIVET-POP | |
| 6. | 165-0188 | [1] | FILM-INSTRUCTION (COOLANT HEATER) | |
| 7. | 165-0189 | [1] | FILM-INSTRUCTION (FUEL HEATER) |
#SEBP25231116
158-6316: FILM GP
For full view, you need register
#SEBP25231117
145-0228: KIT-GASKET
For full view, you need register
Parts for your 325B L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7C-7490 | [1] | GASKET | ||
| 240-2767 | [1] | GASKET | ||
| 300-7933 | [1] | GASKET | ||
| 2M-9780 | [2] | SEAL-O-RING | ||
| 3D-2824 | [2] | SEAL-O-RING | ||
| 3J-1907 | [2] | SEAL-O-RING | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 3P-1156 | [2] | SEAL-O-RING | ||
| 4K-1388 | [3] | SEAL-O-RING | ||
| 5F-9657 | [6] | SEAL-O-RING | ||
| 5K-9090 | [3] | SEAL-O-RING | ||
| 6V-9746 | [2] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP25231118
250-9214: KIT-GASKET
250-9214 KIT-GASKET -OIL COOLER, LINES
S/N 6DN1-UP; 8FN1-UP
KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES.
FOR USE WITH @@@@@115-5938@@@@@
FIELD INSTALLATION
S/N 6DN1-UP; 8FN1-UP
KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES.
FOR USE WITH @@@@@115-5938@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 325B L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2M-9780 | [2] | SEAL-O-RING | |
| 2. | 3D-2824 | [1] | SEAL-O-RING | |
| 3. | 3J-1907 | [2] | SEAL-O-RING | |
| 4. | 3J-7354 | [1] | SEAL-O-RING | |
| 5. | 3P-1156 | [2] | SEAL-O-RING | |
| 6. | 4F-9653 | [1] | SEAL-O-RING | |
| 7. | 4K-1388 | [2] | SEAL-O-RING | |
| 8. | 5F-9657 | [6] | SEAL-O-RING | |
| 9. | 5K-9090 | [3] | SEAL-O-RING | |
| 10. | 7C-7490 | [1] | GASKET | |
| 11. | 8M-4987 | [1] | SEAL-O-RING | |
| 12. | 233-7654 | [1] | GASKET (ENGINE OIL FILTER BASE) | |
| 13. | 233-7655 | [1] | GASKET | |
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP25231119
267-1414: KIT-GASKET
267-1414 KIT-GASKET
S/N 6DN1-UP; 8FN1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS.
FOR USE WITH @@@@@115-5938@@@@@, T792V ENGINE ARRANGEMENT S/N 6JK 1-UP, MACHINE S/N 1CW 1-UP
FIELD INSTALLATION
S/N 6DN1-UP; 8FN1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS.
FOR USE WITH @@@@@115-5938@@@@@, T792V ENGINE ARRANGEMENT S/N 6JK 1-UP, MACHINE S/N 1CW 1-UP
FIELD INSTALLATION
For full view, you need register
Parts for your 325B L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4Y-9652 | [3] | GASKET | ||
| 7C-0358 | [1] | GASKET | ||
| 7W-5340 | [1] | GASKET | ||
| 7W-2426 | [1] | GASKET | ||
| 261-3816 | [1] | GASKET-OIL PAN (ENGINE) | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 3D-2824 | [2] | SEAL-O-RING | ||
| 3J-1907 | [5] | SEAL-O-RING | ||
| 3K-0360 | [3] | SEAL-O-RING | ||
| 3P-1156 | [2] | SEAL-O-RING | ||
| 4F-9653 | [1] | SEAL-O-RING | ||
| 4K-1388 | [1] | SEAL-O-RING | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4F-7391 | [1] | SEAL-O-RING | ||
| 5K-9090 | [2] | SEAL-O-RING | ||
| 8L-2786 | [1] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
Information:
OPERATOR STATION
WASHER GP-WINDOW
Service Magazine
