AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

275-7741 SWITCH GP-WIPER -CAB S/N 4BS1-UP 24-VOLT, INTERMITTENT PART OF 154-8765, 154-8766 PANEL GP-INSTRUMENT 950G


ELECTRICAL AND STARTING SYSTEM
SWITCH GP
WARNING GP
WIRING GP

WHEEL LOADER 950G WHEEL LOADER 4BS
 950G Wheel Loader 4BS00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2527 950G 4BS   (1996)

ELECTRICAL AND STARTING SYSTEM

SWITCH GP
SWITCH GP-START
9G-7641 SWITCH GP-START
SWITCH GP-TRANSMISSION
145-9994 SWITCH GP-TRANSMISSION
SWITCH GP-WIPER
275-7741 SWITCH GP-WIPER
STEERING WHEEL GP
132-3110 STEERING WHEEL GP
STEERING WHEEL GP
151-7007 STEERING WHEEL GP
STEERING WHEEL GP
195-5870 STEERING WHEEL GP
 

#SEBP25270290
 

275-7741: SWITCH GP-WIPER

275-7741 SWITCH GP-WIPER -CAB
S/N 4BS1-UP
24-VOLT, INTERMITTENT
PART OF 154-8765, 154-8766 PANEL GP-INSTRUMENT
i02895040 SEBP2527
2757741 SWITCH GP-WIPER Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8369 [1] NUT (7/16-28-THD)  
2. 2H-3920 [1] LOCKWASHER  
3. 8T-8737 [2] PLUG-SEAL  
4. 8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
5. 102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
 

#SEBP25270291
 

112-6979: WARNING GP-BACKUP

112-6979 WARNING GP-BACKUP
S/N 4BS1-UP
i00492819 SEBP2527
1126979 WARNING GP-BACKUP Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 7K-1181 [2] STRAP-CABLE  
3. 8T-6685 M [2] BOLT (M10X1.5X110-MM)  
4. 9U-2277 [1] CLIP AS  
5. 123-6449 Y [1] ALARM GP (BACKUP)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  5P-5677 D WIRE (18-GA, BLACK)(.6M)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
6. [1] HARNESS AS-ALARM (BACKUP)  
7. 5P-9085 [2] CLIP (LOOP)  
8. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4133 M [2] NUT (M10X1.5-THD)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25270292
 

156-1104: WIRING GP-AXLE TEMPERATURE

156-1104 WIRING GP-AXLE TEMPERATURE
S/N 4BS257-UP
TEMPERATURE
PART OF 148-5657 ELECTRICAL AR
Type 1
i00794914 SEBP2527
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9U-1420 [1] WIRE AS (FRONT)  
  101-9161 [1] WIRE AS (REAR)  
 

#SEBP25270293
 

156-1104: WIRING GP-AXLE TEMPERATURE

156-1104 WIRING GP-AXLE TEMPERATURE
S/N 4BS257-UP
TEMPERATURE
PART OF 148-5657 ELECTRICAL AR
Type 2
i00999426 SEBP2527
1561104 WIRING GP-AXLE TEMPERATURE Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [5] STRAP-CABLE  
2. 130-5300 [3] CLIP  
3. 155-8999 [2] SWITCH AS-TEMPERATURE (FRONT AND REAR AXLE OIL)  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 156-1106 [1] HARNESS AS-AXLE (FRONT OIL TEMPERATURE)  
5. 156-1107 [1] HARNESS AS-AXLE (REAR AXLE OIL TEMPERATURE)  
6. 156-5892 [2] BRACKET  
7. 3K-0360 [2] SEAL-O-RING  
8. 9M-8406 [2] CLIP (LOOP)  
9. 5P-8247 [4] WASHER-HARD (17X32X3.5-MM THK)  
10. 5P-9085 [3] CLIP (LOOP)  
11. 8T-0299 M [4] BOLT (M16X2X30-MM)  
12. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
  M   METRIC PART
 

#SEBP25270294
 

154-8768: WIRING GP-CAB

154-8768 WIRING GP-CAB
S/N 4BS1-UP
PART OF 122-9508 CAB AR, 154-7710 CANOPY AR-OPEN ROPS
Type 1
i00826425 SEBP2527
1548768 WIRING GP-CAB Parts scheme 1548768 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [18] STRAP-CABLE  
2. 4B-2049 [8] NUT (10-32-THD)  
3. 4V-4164 [8] BUSHING-TERMINAL  
4. 6D-6146 [4] SCREW-MACHINE (10-32X1.25-IN)  
5. 6I-1418 [8] SPACER (8.2X12.7X28.7-MM THK)  
6. 6V-2687 [20] SCREW-PAN HEAD (10-24X1-IN)  
7. 7K-1181 [15] STRAP-CABLE  
8. 8T-9655 [16] MOUNT-ISOLATION  
9. 8X-5804 [1] STRAP AS-GROUND  
10. 9F-8125 [8] LOCKWASHER  
11. 098-8968 [8] WASHER (5X16X1.2-MM THK)  
12. 122-4429 [1] PLATE  
13. 122-9854 [1] GASKET  
14. 123-2896 [1] GASKET  
15. 123-4627 [1] GASKET  
16. 123-4628 [2] PLATE  
17. 172-9389 CY [1] CONTROL GP-UNPROGRAMMED (POWER TRAIN)  
18. 172-9391 CY [1] CONTROL GP-UNPROGRAMMED (IMPLEMENT)  
19. 146-6308 [1] PLATE  
20. 147-8345 [1] HARNESS AS-LIGHTING (CAB FLOODLIGHTS)  
21. 152-3825 [1] HARNESS AS-CAB (MAIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [5] KIT-CONNECTING PLUG (6-PIN)  
  155-2265 [4] KIT-CONNECTING PLUG (8-PIN)  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [4] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH CONNECTING PLUG AS INCLUDES PLUG AS & WEDGE)
  121-8038 [1] RECEPTACLE AS  
  8T-8737 [1] PLUG-SEAL  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  9X-1339 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  9X-1343 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  9X-7148 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  8N-1532 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
  9X-7146 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  8N-1535 [1] BELL AS-END  
  9X-0141 [1] PLUG AS-CONNECTOR (40-PIN)  
  9X-0145 [1] RECEPTACLE AS-CONNECTOR (24-PIN)  
  110-6846 [2] PLUG AS-CONNECTOR (40-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8806 [3] KIT-RECEPTACLE (8-PIN)  
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
    (RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
22. 099-3649 M [8] BOLT (M8X1.25X40-MM)  
23. 2S-1647 [1] GROMMET  
24. 4P-7429 [1] CLIP (LADDER)  
25. 4P-8134 [2] CLIP (LADDER)  
26. 7D-7233 [1] CLIP (LOOP)  
27. 8T-4138 M [12] BOLT (M6X1X20-MM)  
28. 8T-4205 [12] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
30. 8T-4244 M [1] NUT (M12X1.75-THD)  
31. 9M-5870 [4] GROMMET  
32. 9N-0869 [8] WASHER-HARD (8.8X25.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25270295
 

154-8768: WIRING GP-CAB

154-8768 WIRING GP-CAB
S/N 4BS1-UP
PART OF 122-9508 CAB AR, 154-7710 CANOPY AR-OPEN ROPS
Type 2
i01438573 SEBP2527
1548768 WIRING GP-CAB Parts scheme 1548768 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [17] STRAP-CABLE  
2. 4B-2049 [8] NUT (10-32-THD)  
3. 4V-4164 [8] BUSHING-TERMINAL  
4. 6D-6146 [4] SCREW-MACHINE (10-32X1.25-IN)  
5. 6I-1418 [8] SPACER (8.2X12.7X28.7-MM THK)  
6. 6V-2687 [20] SCREW-PAN HEAD (10-24X1-IN)  
7. 7K-1181 [15] STRAP-CABLE  
8. 8T-9655 [16] MOUNT-ISOLATION  
9. 8X-5804 [1] STRAP AS-GROUND  
10. 9F-8125 [8] LOCKWASHER  
11. 098-8968 [8] WASHER (5X16X1.2-MM THK)  
12. 122-4429 [1] PLATE  
13. 122-9854 [1] GASKET  
14. 123-2896 [1] GASKET  
15. 123-4627 [1] GASKET  
16. 123-4628 [2] PLATE  
17. 172-9389 Y [1] CONTROL GP-UNPROGRAMMED (POWER TRAIN)  
18. 172-9391 Y [1] CONTROL GP-UNPROGRAMMED (IMPLEMENT)  
19. 146-6308 [1] PLATE  
20. 152-9023 C [1] HARNESS AS-LIGHTING (CAB FLOODLIGHT)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
21. 201-6905 [1] HARNESS AS-CAB (MAIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8806 [3] KIT-RECEPTACLE (8-PIN)  
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
    (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
  110-6846 [2] PLUG AS-CONNECTOR (40-PIN)  
  8N-1532 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
  8N-1536 [1] NUT (1-5/8-18-THD)  
  3E-7996 [9] PLUG-CONNECTOR (6-PIN)  
  9X-0141 [1] PLUG AS-CONNECTOR (40-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8557 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3490 [2] SEAL-CONNECTOR (40-PIN)  
  9X-0145 [1] RECEPTACLE AS-CONNECTOR (24-PIN)  
  9X-1339 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  9X-1343 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  9X-7146 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  9X-7148 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  8N-1535 [1] BELL AS-END  
  121-8038 [1] RECEPTACLE AS  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  8T-8737 [1] PLUG-SEAL  
  155-2260 [4] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [5] KIT-CONNECTING PLUG (6-PIN)  
  155-2265 [4] KIT-CONNECTING PLUG (8-PIN)  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
    (EACH KIT-CONNECTING INCLUDES PLUG AS & WEDGE)
22. 099-3649 M [8] BOLT (M8X1.25X40-MM)  
23. 2S-1647 [1] GROMMET  
24. 4P-7429 [1] CLIP (LADDER)  
25. 4P-8134 [2] CLIP (LADDER)  
26. 7D-7233 [1] CLIP (LOOP)  
27. 8T-4138 M [12] BOLT (M6X1X20-MM)  
28. 8T-4205 [12] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
30. 8T-4244 M [1] NUT (M12X1.75-THD)  
31. 9M-5870 [4] GROMMET  
32. 9N-0869 [8] WASHER-HARD (8.8X25.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25270296
 

154-8768: WIRING GP-CAB

154-8768 WIRING GP-CAB
S/N 4BS1-UP
PART OF 122-9508 CAB AR, 154-7710 CANOPY AR-OPEN ROPS
Type 3
i01506500 SEBP2527
1548768 WIRING GP-CAB Parts scheme 1548768 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [17] STRAP-CABLE  
2. 4B-2049 [8] NUT (10-32-THD)  
3. 4V-4164 [8] BUSHING-TERMINAL  
4. 6D-6146 [4] SCREW-MACHINE (10-32X1.25-IN)  
5. 6I-1418 [8] SPACER (8.2X12.7X28.7-MM THK)  
6. 6V-2687 [20] SCREW-PAN HEAD (10-24X1-IN)  
7. 7K-1181 [15] STRAP-CABLE  
8. 8T-9655 [16] MOUNT-ISOLATION  
9. 8X-5804 [1] STRAP AS-GROUND  
10. 9F-8125 [8] LOCKWASHER  
11. 098-8968 [8] WASHER (5X16X1.2-MM THK)  
12. 122-4429 [1] PLATE  
13. 122-9854 [1] GASKET  
14. 123-2896 [1] GASKET  
15. 123-4627 [1] GASKET  
16. 123-4628 [2] PLATE  
17. 172-9389 Y [1] CONTROL GP-UNPROGRAMMED (POWER TRAIN)  
18. 172-9391 Y [1] CONTROL GP-UNPROGRAMMED (IMPLEMENT)  
19. 146-6308 [1] PLATE  
20. 152-9023 [1] HARNESS AS-LIGHTING (CAB FLOODLIGHT)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
21. 199-6007 C [1] HARNESS AS-CAB (MAIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8806 [3] KIT-RECEPTACLE (8-PIN)  
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
    (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
  110-6846 [2] PLUG AS-CONNECTOR (40-PIN)  
  8N-1532 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
  8N-1536 [1] NUT (1-5/8-18-THD)  
  3E-7996 [9] PLUG-CONNECTOR (6-PIN)  
  9X-0141 [1] PLUG AS-CONNECTOR (40-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8557 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3490 [2] SEAL-CONNECTOR (40-PIN)  
  9X-0145 [1] RECEPTACLE AS-CONNECTOR (24-PIN)  
  9X-1339 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  9X-1343 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  9X-7146 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  9X-7148 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  8N-1535 [1] BELL AS-END  
  121-8038 [1] RECEPTACLE AS  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8737 [1] PLUG-SEAL  
  155-2260 [4] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [5] KIT-CONNECTING PLUG (6-PIN)  
  155-2265 [4] KIT-CONNECTING PLUG (8-PIN)  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
    (EACH KIT-CONNECTING INCLUDES PLUG AS & WEDGE)
22. 099-3649 M [8] BOLT (M8X1.25X40-MM)  
23. 2S-1647 [1] GROMMET  
24. 4P-7429 [1] CLIP (LADDER)  
25. 4P-8134 [2] CLIP (LADDER)  
26. 7D-7233 [1] CLIP (LOOP)  
27. 8T-4138 M [12] BOLT (M6X1X20-MM)  
28. 8T-4205 [12] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
30. 8T-4244 M [1] NUT (M12X1.75-THD)  
31. 9M-5870 [4] GROMMET  
32. 9N-0869 [8] WASHER-HARD (8.8X25.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25270297
 

154-8769: WIRING GP-CAB

154-8769 WIRING GP-CAB
S/N 4BS1-UP
PART OF 146-3285 CAB AR-ENCLOSED ROPS
Type 1
i00745678 SEBP2527
1548769 WIRING GP-CAB Parts scheme 1548769 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [17] STRAP-CABLE  
2. 4B-2049 [8] NUT (10-32-THD)  
3. 4V-4164 [8] BUSHING-TERMINAL  
4. 6D-6146 [4] SCREW-MACHINE (10-32X1.25-IN)  
5. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
6. 6V-2687 [20] SCREW-PAN HEAD (10-24X1-IN)  
7. 7K-1181 [15] STRAP-CABLE  
8. 8T-9655 [8] MOUNT-ISOLATION  
9. 8X-5804 [1] STRAP AS-GROUND  
10. 9F-8125 [8] LOCKWASHER  
11. 098-8968 [8] WASHER (5X16X1.2-MM THK)  
12. 122-4429 [1] PLATE  
13. 122-9854 [1] GASKET  
14. 123-2896 [1] GASKET  
15. 123-4627 [1] GASKET  
16. 123-4628 [2] PLATE  
17. 172-9389 Y [1] CONTROL GP-UNPROGRAMMED (POWER TRAIN)  
18. 146-6308 [1] PLATE  
19. 147-8345 [1] HARNESS AS-LIGHTING (CAB FLOODLIGHTS)  
20. 154-7170 [1] HARNESS AS-CAB (MAIN)  
21. 099-3649 M [4] BOLT (M8X1.25X40-MM)  
22. 2S-1647 [1] GROMMET  
23. 4P-7429 [1] CLIP (LADDER)  
24. 4P-8134 [2] CLIP (LADDER)  
25. 6V-4369 [1] CLIP  
26. 7D-7233 [1] CLIP (LOOP)  
27. 8T-4138 M [12] BOLT (M6X1X20-MM)  
28. 8T-4205 [12] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
30. 8T-4244 M [1] NUT (M12X1.75-THD)  
31. 9M-5870 [4] GROMMET  
32. 9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
33. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25270298
 

154-8769: WIRING GP-CAB

154-8769 WIRING GP-CAB
S/N 4BS1-UP
PART OF 146-3285 CAB AR-ENCLOSED ROPS
Type 2
i01438306 SEBP2527
1548769 WIRING GP-CAB Parts scheme 1548769 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 4B-2049 [8] NUT (10-32-THD)  
3. 4V-4164 [8] BUSHING-TERMINAL  
4. 6D-6146 [4] SCREW-MACHINE (10-32X1.25-IN)  
5. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
6. 6V-2687 [20] SCREW-PAN HEAD (10-24X1-IN)  
7. 7K-1181 [15] STRAP-CABLE  
8. 8T-9655 [8] MOUNT-ISOLATION  
9. 8X-5804 [1] STRAP AS-GROUND  
10. 9F-8125 [8] LOCKWASHER  
11. 098-8968 [8] WASHER (5X16X1.2-MM THK)  
12. 122-4429 [1] PLATE  
13. 122-9854 [1] GASKET  
14. 123-2896 [1] GASKET  
15. 123-4627 [1] GASKET  
16. 123-4628 [2] PLATE  
17. 172-9389 Y [1] CONTROL GP-UNPROGRAMMED (POWER TRAIN)  
18. 146-6308 [1] PLATE  
19. 152-9023 C [1] HARNESS AS-LIGHTING (CAB FLOODLIGHT)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
20. 201-6904 [1] HARNESS AS-CAB (MAIN)  
  3E-7996 [8] PLUG-CONNECTOR (6-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
  110-6846 [1] PLUG AS-CONNECTOR (40-PIN)  
  8N-1532 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
  8N-1536 [1] NUT (1-5/8-18-THD)  
  5P-6271 [1] CONNECTOR AS  
  9X-0141 [1] PLUG AS-CONNECTOR (40-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8557 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3490 [2] SEAL-CONNECTOR (40-PIN)  
  9X-0145 [1] RECEPTACLE AS-CONNECTOR (24-PIN)  
  9X-1339 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  9X-1343 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  9X-7146 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  9X-7146 [1] PLUG AS-CONNECTOR (24-PIN)  
  110-6848 [1] PLUG AS-CONNECTOR (40-PIN)  
  110-6844 [1] SEAL  
  121-8038 [1] RECEPTACLE AS  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  8T-8737 [1] PLUG-SEAL  
  155-2260 [6] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [4] KIT-CONNECTING PLUG (6-PIN)  
  155-2265 [5] KIT-CONNECTING PLUG (8-PIN)  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
    (EACH KIT-CONNECTING INCLUDES PLUG AS & WEDGE)
21. 099-3649 M [4] BOLT (M8X1.25X40-MM)  
22. 2S-1647 [1] GROMMET  
23. 4P-7429 [1] CLIP (LADDER)  
24. 4P-8134 [2] CLIP (LADDER)  
25. 6V-4369 [1] CLIP  
26. 7D-7233 [1] CLIP (LOOP)  
27. 8T-4138 M [12] BOLT (M6X1X20-MM)  
28. 8T-4205 [12] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
30. 8T-4244 M [1] NUT (M12X1.75-THD)  
31. 9M-5870 [4] GROMMET  
32. 9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
33. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25270299
 

154-8769: WIRING GP-CAB

154-8769 WIRING GP-CAB
S/N 4BS1-UP
PART OF 146-3285 CAB AR-ENCLOSED ROPS
Type 3
i01523140 SEBP2527
1548769 WIRING GP-CAB Parts scheme 1548769 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [16] STRAP-CABLE  
2. 4B-2049 [8] NUT (10-32-THD)  
3. 4V-4164 [8] BUSHING-TERMINAL  
4. 6D-6146 [4] SCREW-MACHINE (10-32X1.25-IN)  
5. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
6. 6V-2687 [20] SCREW-PAN HEAD (10-24X1-IN)  
7. 7K-1181 [15] STRAP-CABLE  
8. 8T-9655 [8] MOUNT-ISOLATION  
9. 8X-5804 [1] STRAP AS-GROUND  
10. 9F-8125 [8] LOCKWASHER  
11. 098-8968 [8] WASHER (5X16X1.2-MM THK)  
12. 122-4429 [1] PLATE  
13. 122-9854 [1] GASKET  
14. 123-2896 [1] GASKET  
15. 123-4627 [1] GASKET  
16. 123-4628 [2] PLATE  
17. 172-9389 Y [1] CONTROL GP-UNPROGRAMMED (POWER TRAIN)  
18. 146-6308 [1] PLATE  
19. 152-9023 [1] HARNESS AS-LIGHTING (CAB FLOODLIGHT)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
20. 199-6008 C [1] HARNESS AS-CAB (MAIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  8L-8413 [97] STRAP-CABLE (WHITE)  
  8N-1532 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
  9X-0145 [1] RECEPTACLE AS-CONNECTOR (24-PIN)  
  9X-1339 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  9X-1343 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  121-8038 [1] RECEPTACLE AS  
  155-2260 [6] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [4] KIT-CONNECTING PLUG (6-PIN)  
  155-2265 [5] KIT-CONNECTING PLUG (8-PIN)  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
21. 099-3649 M [4] BOLT (M8X1.25X40-MM)  
22. 2S-1647 [1] GROMMET  
23. 4P-7429 [1] CLIP (LADDER)  
24. 4P-8134 [2] CLIP (LADDER)  
25. 6V-4369 [1] CLIP  
26. 7D-7233 [1] CLIP (LOOP)  
27. 8T-4138 M [12] BOLT (M6X1X20-MM)  
28. 8T-4205 [12] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
30. 8T-4244 M [1] NUT (M12X1.75-THD)  
31. 9M-5870 [4] GROMMET  
32. 9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
33. 9X-2044 M [1] SCREW-TRUSS HEAD (M6X1X16-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 950G :

SWITCH GP-TRANSMISSION
145-9994 SWITCH GP-TRANSMISSION
SWITCH GP-START
9G-7641 SWITCH GP-START
SWITCH GP-SIGNAL
153-2387 SWITCH GP-SIGNAL
SWITCH GP-SIGNAL
153-2387 SWITCH GP-SIGNAL
SWITCH GP-SIGNAL
129-4060 SWITCH GP-SIGNAL
141-2804 SWITCH GP-SECONDARY STEERING
SWITCH GP-ROCKER
491-3734 SWITCH GP-ROCKER
SWITCH GP-ROCKER
177-2373 SWITCH GP-ROCKER
WARNING GP-BACKUP
112-6979 WARNING GP-BACKUP
156-1104 WIRING GP-AXLE TEMPERATURE
WIRING GP-AXLE TEMPERATURE
156-1104 WIRING GP-AXLE TEMPERATURE
WIRING GP-CAB
154-8768 WIRING GP-CAB
WIRING GP-CAB
154-8768 WIRING GP-CAB
WIRING GP-CAB
154-8768 WIRING GP-CAB
WIRING GP-CAB
154-8769 WIRING GP-CAB
WIRING GP-CAB
154-8769 WIRING GP-CAB

Truck sale:

Caterpillar 950G
 
Caterpillar 950G
- Wheel Loaders
ZIEGLER CAT
Caterpillar 950GC, Wheel Loaders, Construction
129,900 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 950GC, Wheel Loaders, Construction
185,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO
Caterpillar 950GC, Wheel Loaders, Construction
190,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
ZIEGLER CAT
Caterpillar 950GC, Wheel Loaders, Construction
215,000 
Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
THOMPSON TRACTOR CO., INC.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.