POWER TRAIN
CONTROL GP-TRANSMISSION HYDCOOLER GP
FILLER GP-POWER TRAIN OIL
DIFFERENTIAL & BEVEL GEAR GP
POWER TRAIN
CONTROL GP-TRANSMISSION HYD
#SEBP25270330
117-5756: CONTROL GP-TRANSMISSION HYD
117-5756 CONTROL GP-TRANSMISSION HYD
S/N 2XY1-1057
PART OF 114-8945 TRANSMISSION AR
S/N 2XY1-1057
PART OF 114-8945 TRANSMISSION AR
For full view, you need register
Parts for your 950G WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 115-4551 Y | [1] | VALVE GP-RELIEF (TMSN HYDRAULIC CONTROL) | |
| 2. | 4F-4097 | [1] | SEAL-O-RING | |
| 3. | Y | [6] | VALVE GP-MODULATING (TRANSMISSION CLUTCH) | |
| 4. | 8S-0768 | [6] | SEAL-O-RING | |
| 5. | 8T-0100 M | [16] | BOLT (M8X1.25X60-MM) | |
| 6. | 9M-1974 | [14] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 6Y-2103 | [1] | VALVE GP-RELIEF (TORQUE CONVERTER INLET) | |
| 8. | 148-8805 | [1] | HARNESS AS-TRANSMISSION (HYDRAULIC CONTROL) | |
| 9. | 9X-4609 | [1] | SEAL-O-RING | |
| 10. | 3S-2093 | [4] | STRAP-CABLE | |
| 11. | 4P-7428 | [1] | CLIP (LADDER) | |
| 12. | 4P-7581 | [1] | CLIP (LADDER) | |
| 13. | 5P-9085 | [2] | CLIP (LOOP)(7.94MM ID) | |
| 14. | 9X-3495 | [1] | CLIP AS | |
| 15. | 100-3055 Y | [1] | SENSOR GP-TEMPERATURE (TRANSMISSION OIL) | |
| 16. | 3J-1907 | [1] | SEAL-O-RING | |
| 17. | 124-9403 | [1] | CLIP AS-CONNECTING | |
| 18. | 6V-5215 M | [1] | BOLT (M8X1.25X16-MM) | |
| 19. | 6D-4246 | [1] | CLIP (LOOP) | |
| 20. | 123-3182 | [3] | CLIP AS | |
| 21. | 6V-0852 | [6] | CAP-DUST | |
| 22. | 124-9402 | [5] | CLIP AS | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25270331
117-5756: CONTROL GP-TRANSMISSION HYD
117-5756 CONTROL GP-TRANSMISSION HYD
S/N 2XY1058-99999
PART OF 114-8945 TRANSMISSION AR
S/N 2XY1058-99999
PART OF 114-8945 TRANSMISSION AR
For full view, you need register
Parts for your 950G WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 115-4551 Y | [1] | VALVE GP-RELIEF (TMSN HYDRAULIC CONTROL) | |
| 2. | 4F-4097 | [1] | SEAL-O-RING | |
| 3. | Y | [6] | VALVE GP-MODULATING (TRANSMISSION CLUTCH) | |
| 4. | 8S-0768 | [6] | SEAL-O-RING | |
| 5. | 8T-0100 M | [16] | BOLT (M8X1.25X60-MM) | |
| 6. | 9M-1974 | [14] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 148-1928 C | [1] | VALVE-RELIEF (TORQUE CONVERTER INLET) | |
| 8. | 148-8805 | [1] | HARNESS AS-TRANSMISSION (HYDRAULIC CONTROL) | |
| 9. | 9X-4609 | [1] | SEAL-O-RING | |
| 10. | 3S-2093 | [4] | STRAP-CABLE | |
| 11. | 4P-7428 | [1] | CLIP (LADDER) | |
| 13. | 5P-9085 | [2] | CLIP (LOOP)(7.94MM ID) | |
| 14. | 9X-3495 | [1] | CLIP AS | |
| 15. | 100-3055 Y | [1] | SENSOR GP-TEMPERATURE (TRANSMISSION OIL) | |
| 16. | 3J-1907 | [1] | SEAL-O-RING | |
| 17. | 124-9403 | [1] | CLIP AS-CONNECTING | |
| 18. | 6V-5215 M | [1] | BOLT (M8X1.25X16-MM) | |
| 19. | 6D-4246 | [1] | CLIP (LOOP) | |
| 20. | 123-3182 | [3] | CLIP AS | |
| 21. | 6V-0852 | [6] | CAP-DUST | |
| 22. | 124-9402 | [5] | CLIP AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25270332
176-0054: CONTROL GP-TRANSMISSION HYD
176-0054 CONTROL GP-TRANSMISSION HYD
S/N 8DY1-99999; 8NY1-99999
PART OF 176-0056, 176-0057 TRANSMISSION AR
S/N 8DY1-99999; 8NY1-99999
PART OF 176-0056, 176-0057 TRANSMISSION AR
For full view, you need register
Parts for your 950G WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 115-4551 Y | [1] | VALVE GP-RELIEF (TMSN HYDRAULIC CONTROL) | |
| 2. | 4F-4097 | [1] | SEAL-O-RING | |
| 3. | 160-8408 Y | [6] | VALVE GP-MODULATING (TRANSMISSION CLUTCH) | |
| 4. | 8S-0768 | [6] | SEAL-O-RING | |
| 5. | 8T-0100 M | [16] | BOLT (M8X1.25X60-MM) | |
| 6. | 9M-1974 | [13] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 148-1928 | [1] | VALVE-RELIEF (TORQUE CONVERTER INLET) | |
| 8. | 176-0052 | [1] | HARNESS AS-TRANSMISSION (HYDRAULIC CONTROL) | |
| 1S-9593 | [1] | STRAP-CABLE | ||
| 7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 8T-8731 | [1] | PLUG-CONNECTOR (3-PIN) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 9. | 9X-4609 | [1] | SEAL-O-RING | |
| 10. | 4P-7581 | [1] | CLIP (LADDER) | |
| 11. | 5P-9085 | [2] | CLIP (LOOP) | |
| 12. | 9X-3495 | [1] | CLIP AS | |
| 13. | 100-3055 Y | [1] | SENSOR GP-TEMPERATURE (TRANSMISSION OIL) | |
| 14. | 3J-1907 | [1] | SEAL-O-RING | |
| 15. | 124-9403 | [1] | CLIP AS-CONNECTING | |
| 16. | 7X-2536 M | [1] | BOLT (M8X1.25X14-MM) | |
| 17. | 3S-2093 | [11] | STRAP-CABLE | |
| 18. | 174-9603 | [3] | PLATE | |
| 19. | 6V-0852 | [6] | CAP-DUST | |
| 20. | 124-9402 | [3] | CLIP AS | |
| 21. | 6D-4246 | [1] | CLIP (LOOP) | |
| 22. | 4P-7428 | [1] | CLIP (LADDER) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25270333
186-2521: CONTROL GP-TRANSMISSION HYD
186-2521 CONTROL GP-TRANSMISSION HYD
S/N BJH1-UP; BJL1-UP; BJT1-920
PART OF 186-2524, 186-2525, 186-2527 TRANSMISSION AR
S/N BJH1-UP; BJL1-UP; BJT1-920
PART OF 186-2524, 186-2525, 186-2527 TRANSMISSION AR
For full view, you need register
Parts for your 950G WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 115-4551 Y | [1] | VALVE GP-RELIEF (TRANSMISSION HYD CONTROL) | |
| 2. | 4F-4097 | [1] | SEAL-O-RING | |
| 3. | 160-8408 Y | [6] | VALVE GP-MODULATING (TRANSMISSION CLUTCH) | |
| 4. | 8S-0768 | [6] | SEAL-O-RING | |
| 5. | 8T-0100 M | [16] | BOLT (M8X1.25X60-MM) | |
| 6. | 9M-1974 | [13] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 148-1928 | [1] | VALVE-RELIEF (TORQUE CONVERTER INLET) | |
| 8. | 186-2518 | [1] | HARNESS AS-TRANSMISSION (HYDRAULIC CONTROL) | |
| 7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 8T-8731 | [1] | PLUG-CONNECTOR (3-PIN) | ||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 155-2269 | [9] | PLUG AS-CONNECTOR (2-PIN) | ||
| 9. | 9X-4609 | [1] | SEAL-O-RING | |
| 10. | 4P-8134 | [1] | CLIP (LADDER) | |
| 11. | 5P-9085 | [2] | CLIP (LOOP) | |
| 12. | 9X-3495 | [1] | CLIP AS | |
| 13. | 100-3055 Y | [1] | SENSOR GP-TEMPERATURE (TRANSMISSION OIL) | |
| 14. | 3J-1907 | [1] | SEAL-O-RING | |
| 15. | 3S-2093 | [11] | STRAP-CABLE | |
| 16. | 174-9603 | [3] | PLATE | |
| 17. | 6V-0852 | [6] | CAP-DUST | |
| 18. | 124-9402 | [3] | CLIP AS | |
| 19. | 6D-4246 | [1] | CLIP (LOOP) | |
| 20. | 4P-7428 | [1] | CLIP (LADDER) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25270334
186-2521: CONTROL GP-TRANSMISSION HYD
186-2521 CONTROL GP-TRANSMISSION HYD
S/N BJT921-UP
PART OF 186-2527 TRANSMISSION AR
S/N BJT921-UP
PART OF 186-2527 TRANSMISSION AR
For full view, you need register
Parts for your 950G WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 115-4551 Y | [1] | VALVE GP-RELIEF (TRANSMISSION HYD CONTROL) | |
| 2. | 4F-4097 | [1] | SEAL-O-RING | |
| 3. | 244-3114 Y | [6] | VALVE GP-MODULATING (24-VOLT)(TRANSMISSION CLUTCH) | |
| 4. | 8S-0768 | [6] | SEAL-O-RING | |
| 5. | 8T-0100 M | [16] | BOLT (M8X1.25X60-MM) | |
| 6. | 9M-1974 | [13] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 148-1928 | [1] | VALVE-RELIEF (TORQUE CONVERTER INLET) | |
| 8. | 186-2518 | [1] | HARNESS AS-TRANSMISSION (HYDRAULIC CONTROL) | |
| 7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 8T-8731 | [1] | PLUG-CONNECTOR (3-PIN) | ||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 155-2269 | [9] | PLUG AS-CONNECTOR (2-PIN) | ||
| 9. | 9X-4609 | [1] | SEAL-O-RING | |
| 10. | 4P-8134 | [1] | CLIP (LADDER) | |
| 11. | 5P-9085 | [2] | CLIP (LOOP) | |
| 12. | 9X-3495 | [1] | CLIP AS | |
| 13. | 100-3055 Y | [1] | SENSOR GP-TEMPERATURE (TRANSMISSION OIL) | |
| 14. | 3J-1907 | [1] | SEAL-O-RING | |
| 15. | 3S-2093 | [11] | STRAP-CABLE | |
| 16. | 174-9603 | [3] | PLATE | |
| 17. | 6V-0852 | [6] | CAP-DUST | |
| 18. | 124-9402 | [3] | CLIP AS | |
| 19. | 6D-4246 | [1] | CLIP (LOOP) | |
| 20. | 4P-7428 | [1] | CLIP (LADDER) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25270335
151-6291: COOLER & MTG AR-AXLE OIL
151-6291 COOLER & MTG AR-AXLE OIL
S/N 4BS1-UP
CANNOT BE USED WITH @@@@@143-4953@@@@@
S/N 4BS1-UP
CANNOT BE USED WITH @@@@@143-4953@@@@@
For full view, you need register
Parts for your 950G WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| Y | [1] | ALTERNATOR GP-CHARGING | ||
| 151-6295 Y | [1] | MOUNTING GP-AXLE OIL COOLER | ||
| Y | [1] | DAMPER & PULLEY GP | ||
| 143-0001 Y | [1] | GUARD GP-AXLE OIL COOLER | ||
| 164-2809 Y | [1] | GUARD GP-CRANKCASE | ||
| 156-1137 Y | [1] | GUARD GP-POWER TRAIN (AXLE OIL COOLER) | ||
| 151-6297 Y | [1] | LINES GP-AXLE OIL COOLER | ||
| 151-6299 Y | [1] | LINES GP-WATER (FOR USE WITH AXLE OIL COOLER) | ||
| 151-6298 Y | [1] | PUMP & MTG GP-AXLE OIL COOLER | ||
| 156-1105 Y | [1] | WIRING GP-ELECTRIC CLUTCH (AXLE OIL COOLER PUMP) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25270336
7K-5636: COVER GP-XMSN OIL FILLER CAP
7K-5636 COVER GP-XMSN OIL FILLER CAP
S/N 4BS1-UP
PART OF 133-1640 PROTECTION GP-VANDALISM
S/N 4BS1-UP
PART OF 133-1640 PROTECTION GP-VANDALISM
For full view, you need register
#SEBP25270337
137-1392: DIFFERENTIAL GP
137-1392 DIFFERENTIAL GP
S/N 4BS1-UP
PART OF 112-0768, 138-3122, 214-6161, 214-9398 AXLE AR-FIXED, 112-0723 AXLE AR-OSCILLATING
S/N 4BS1-UP
PART OF 112-0768, 138-3122, 214-6161, 214-9398 AXLE AR-FIXED, 112-0723 AXLE AR-OSCILLATING
For full view, you need register
Parts for your 950G WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 136-6550 | [1] | CASE AS | |
| 1A. | 8T-5001 JM | [4] | BOLT (M12X1.75X130-MM) | |
| 1B. | 5P-8245 J | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 2. | 148-7383 | [2] | WASHER-THRUST | |
| 3. | 136-6551 | [2] | GEAR (16-TEETH) | |
| 4. | 217-3681 | [4] | WASHER-THRUST | |
| 5. | 136-6545 | [1] | SPIDER | |
| 6. | 151-4809 | [4] | BUSHING | |
| 7. | 9C-6016 | [4] | PINION-DIFFERENTIAL BEVEL (11-TEETH) | |
| 8. | 127-1960 M | [8] | SCREW-FLAT HEAD (M6X1X16-MM) | |
| J | PARTS MARKED J ARE FOR SHIPPING & STORAGE ONLY, REMOVE BEFORE INSTALLATION INTO AXLE | |||
| M | METRIC PART | |||
#SEBP25270338
143-9514: DIFFERENTIAL GP
143-9514 DIFFERENTIAL GP -UNCHARGED
S/N 4BS1-351
PART OF 112-0768 AXLE AR-FIXED, 112-0723 AXLE AR-OSCILLATING
FIELD REPLACEMENT ORDER @@@@@355-3167@@@@@
FIELD REPLACEMENT FOR @@@@@ 9C-8171@@@@@
S/N 4BS1-351
PART OF 112-0768 AXLE AR-FIXED, 112-0723 AXLE AR-OSCILLATING
FIELD REPLACEMENT ORDER @@@@@355-3167@@@@@
FIELD REPLACEMENT FOR @@@@@ 9C-8171@@@@@
For full view, you need register
Parts for your 950G WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8R-1704 | [2] | GEAR-DIFFERENTIAL BEVEL (16-TEETH)(16 TEETH) | |
| 2. | 133-8305 | [4] | WASHER-THRUST | |
| 3. | 162-8772 | [2] | WASHER-THRUST | |
| 4. | 8R-1703 | [4] | PINION-DIFFERENTIAL BEVEL (10-TEETH) | |
| 5. | 5V-1274 | [1] | SPIDER | |
| 6. | 8R-9440 | [1] | CASE AS-DIFFERENTIAL | |
| 6A. | 5P-8245 J | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 6B. | 8T-5001 JM | [4] | BOLT (M12X1.75X130-MM) | |
| 7. | 8R-2211 | [4] | BUSHING | |
| J | PARTS MARKED J ARE FOR SHIPPING & STORAGE ONLY, REMOVE BEFORE INSTALLATION INTO AXLE | |||
| M | METRIC PART | |||
#SEBP25270339
355-3167: DIFFERENTIAL GP
355-3167 DIFFERENTIAL GP -UNCHARGED
S/N 4BS1-UP
FIELD REPLACEMENT FOR @@@@@143-9514@@@@@
S/N 4BS1-UP
FIELD REPLACEMENT FOR @@@@@143-9514@@@@@
For full view, you need register
