OPERATOR STATION
CAB GPCONTROL GP-STEERING
SUPPORT GP
SUPPRESSION GP
SEAT GP
OPERATOR STATION
CAB GP
#SEBP25270900
156-0549: STEERING COLUMN GP
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS#SEBP25270901
297-4928: STEERING COLUMN GP
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-8227 M | [1] | NUT (M18X1.5-THD) | |
| 2. | 319-9511 | [1] | KIT-GAS SPRING | |
| (INCLUDES ONE GAS STRUT) | ||||
| 3. | 271-9109 | [1] | KIT-TILT LEVER | |
| (INCLUDES BOLTS, DOWEL, SPRING & TILT LEVER) | ||||
| 4. | 325-4636 | [1] | KIT-PIVOT | |
| (INCLUDES BUSHINGS & PINS) | ||||
| 5. | 6V-5218 M | [1] | BOLT (M8X1.25X35-MM) | |
| 6. | 8T-7963 M | [1] | LOCKNUT (M8X1.25-THD) | |
| 7. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 3T-0852 M | [1] | LOCKNUT (M8X1.25-THD) | |
| M | METRIC PART | |||
#SEBP25270902
223-3667: STEERING COLUMN GP-ADJUSTABLE
223-3667 STEERING COLUMN GP-ADJUSTABLE
S/N 4BS1-UP
PART OF 141-8802 CONTROL GP-STEERING
S/N 4BS1-UP
PART OF 141-8802 CONTROL GP-STEERING
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 332-6886 | [1] | KIT-CONTACT | |
| (INCLUDES HORN CONTACT AS, LOCKWASHERS, & SCREWS) | ||||
| 2. | 6V-8227 M | [1] | NUT (M18X1.5-THD) | |
| 3. | 319-9511 | [1] | KIT-GAS SPRING | |
| (INCLUDES GAS STRUT, PIN, & RETAINING RINGS) | ||||
| 4. | 271-9109 | [1] | KIT-TILT LEVER | |
| (INCLUDES BOLTS, DOWEL, SPRING, & TILT LEVER) | ||||
| 5. | 325-4636 | [1] | KIT-PIVOT | |
| (INCLUDES BUSHING-PIVOTS & PIN-PIVOTS) | ||||
| M | METRIC PART | |||
#SEBP25270903
297-4926: STEERING COLUMN GP-ADJUSTABLE
297-4926 STEERING COLUMN GP-ADJUSTABLE
S/N 4BS1-UP
PART OF 141-8802 CONTROL GP-STEERING
S/N 4BS1-UP
PART OF 141-8802 CONTROL GP-STEERING
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 332-6885 | [1] | KIT-CONTACT (GROUND) | |
| (INCLUDES HORN CONTACT AS (BLACK WIRE) & SCREWS) | ||||
| 2. | 332-6817 | [1] | KIT-CONTACT | |
| (INCLUDES HORN CONTACT AS (BLUE WIRE) & SCREWS) | ||||
| 3. | 6V-8227 M | [1] | NUT (M18X1.5-THD) | |
| 4. | 319-9511 | [1] | KIT-GAS SPRING | |
| (INCLUDES ONE GAS STRUT) | ||||
| 5. | 271-9109 | [1] | KIT-TILT LEVER | |
| (INCLUDES BOLTS, DOWEL, SPRING & TILT LEVER) | ||||
| 6. | 325-4636 | [1] | KIT-PIVOT | |
| (INCLUDES BUSHINGS & PINS) | ||||
| M | METRIC PART | |||
#SEBP25270904
127-0743: SUPPORT GP-HYDRAULIC CONTROL
127-0743 SUPPORT GP-HYDRAULIC CONTROL
S/N 4BS1-UP
PART OF 122-9508 CAB AR, 154-7710 CANOPY AR-OPEN ROPS
S/N 4BS1-UP
PART OF 122-9508 CAB AR, 154-7710 CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2W-9372 | [4] | LOCKWASHER | |
| 2. | 3B-5470 | [1] | SPRING | |
| 3. | 3K-4897 | [1] | PIN-SPRING | |
| 4. | 3T-0852 M | [4] | LOCKNUT (M8X1.25-THD) | |
| 5. | 4B-4278 | [1] | WASHER (10.2X20.5X1.6-MM THK) | |
| 6. | 8T-4224 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 4E-6331 | [1] | LEVER (CUSHION POSITIONING) | |
| 8. | 4E-6332 | [1] | SHAFT | |
| 9. | 4E-6523 | [1] | SUPPORT-SLIDE | |
| 10. | 4E-6526 | [1] | CUSHION AS (RH) | |
| 11. | 4E-6527 M | [2] | BOLT-PIVOT (M12X1.75X25.4-MM) | |
| 12. | 4E-8722 | [6] | NUT (RETAINER) | |
| 13. | 4E-9173 | [2] | SHAFT-CONTROL | |
| 14. | 4E-9174 | [2] | BEARING | |
| 15. | 156-7128 M | [4] | BEARING | |
| 16. | 4E-9453 | [1] | BAR | |
| 17. | 4E-9454 | [1] | LEVER | |
| 18. | 4E-9455 | [1] | SUPPORT | |
| 19. | 4E-9456 | [1] | SHAFT | |
| 20. | 4E-9457 | [1] | ADAPTER | |
| 21. | 4E-9757 | [1] | RACK | |
| 22. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 23. | 5D-4822 | [2] | RING-RETAINING | |
| 24. | 6V-9327 M | [8] | SETSCREW-SOCKET (M6X1-THD) | |
| 25. | 7V-0445 | [1] | SPRING | |
| 26. | 7X-2031 | [2] | RETAINER | |
| 27. | 7X-3310 | [1] | KNOB-BALL | |
| 28. | 8C-7506 M | [3] | SCREW-MACHINE (M8X1.25X40-MM) | |
| 29. | 8P-9475 | [1] | COLLAR | |
| 30. | 8T-2659 M | [2] | LOCKNUT (M4X0.7-THD) | |
| 31. | 8Y-5746 | [1] | ASHTRAY | |
| 32. | 9M-9725 | [2] | SPACER (0.319X0.375X0.19-MM THK) | |
| 33. | 9U-0952 | [1] | PIN | |
| 34. | 9U-0953 | [1] | GUIDE | |
| 35. | 9U-0954 | [1] | STUD | |
| 36. | 9U-0955 | [1] | PIN | |
| 37. | 9U-0958 | [1] | SLIDER | |
| 38. | 9U-2421 | [1] | SPACER | |
| 39. | 9U-2422 | [1] | ROD | |
| 40. | 9U-3925 | [4] | RING-RETAINING | |
| 41. | 9U-3926 | [6] | STOP | |
| 42. | 9U-3927 | [1] | BEARING | |
| 43. | 9W-0335 | [1] | LIGHTER AS-CIGAR (24-VOLT) | |
| 44. | 9X-2044 M | [13] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 45. | 9X-8290 M | [2] | BOLT (M8X1.25X20-MM) | |
| 46. | 091-9967 | [1] | SPRING | |
| 47. | 095-0758 M | [4] | SCREW-MACHINE (M6X1X14-MM) | |
| 48. | 108-2994 | [1] | TRACK | |
| 49. | 157-6999 | [1] | SUPPORT AS | |
| 8T-3612 M | [5] | NUT-WELD (M8X1.25-THD) | ||
| 50. | 126-9583 | [1] | STRIP | |
| 51. | 126-9594 | [1] | PLATE AS | |
| 52. | [1] | LEVER AS (CONSOLE POSITIONING) | ||
| 53. | 127-1962 | [1] | ROD | |
| 54. | 127-5478 | [1] | COVER | |
| 55. | 127-5479 | [1] | COVER | |
| 56. | 127-5480 | [1] | BRACKET AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 57. | 137-6841 B | [2] | SHIM (0.2-MM THK) | |
| 58. | 2U-9010 | [1] | SPACER (10.5-MM THK) | |
| 59. | 128-2478 | [2] | SPACER (8.5X15X9-MM THK) | |
| 60. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
| 61. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 62. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 63. | 8T-4189 M | [5] | BOLT (M8X1.25X20-MM) | |
| 65. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 66. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 67. | 8T-4908 M | [3] | BOLT (M8X1.25X25-MM) | |
| 68. | 4P-7581 | [2] | CLIP (LADDER) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP25270905
142-0874: SUPPORT GP-HYDRAULIC CONTROL
142-0874 SUPPORT GP-HYDRAULIC CONTROL
S/N 4BS1-UP
PART OF 146-3285 CAB AR-ENCLOSED ROPS
S/N 4BS1-UP
PART OF 146-3285 CAB AR-ENCLOSED ROPS
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-1062 | [1] | CUSHION AS-ARMREST | |
| 2. | 5P-5454 | [1] | ASHTRAY | |
| 3. | 5P-5824 | [1] | HOLDER | |
| 4. | 8C-3426 J | [1] | LOCK GP-CYLINDER | |
| 4A. | 7F-9223 | [1] | LOCKWASHER | |
| 4B. | 8T-5004 | [1] | SCREW-MACHINE (1/4-28X0.375-IN) | |
| 5. | 9W-0335 | [1] | LIGHTER AS-CIGAR (24-VOLT) | |
| 6. | 162-7285 | [1] | SUPPORT AS | |
| 6A. | 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | |
| 7. | 111-7875 | [1] | PLATE | |
| 8. | 118-8568 | [1] | LEVER | |
| 9. | 125-7045 | [1] | COVER AS | |
| 10. | 125-7046 | [1] | PLATE AS | |
| 11. | 128-7380 | [1] | COVER AS | |
| 12. | 142-0433 | [1] | COVER | |
| 13. | 172-6478 | [1] | SUPPORT AS | |
| 13A. | 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | |
| 14. | 172-6479 | [1] | SUPPORT AS | |
| 15. | 144-4303 | [1] | SUPPORT AS | |
| 15A. | 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | |
| 15B. | 7T-1099 | [1] | LINK | |
| 15C. | 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | |
| 16. | 173-2384 | [1] | BOX AS | |
| 17. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 18. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 20. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 21. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 22. | 9X-2041 M | [15] | SCREW-TRUSS HEAD (M10X1.5X20-MM) | |
| 23. | 9X-2042 M | [14] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 24. | 9X-2045 M | [2] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 25. | 5P-5637 BE | SEAL | ||
| 28. | 7X-7729 | [1] | WASHER (11X25X3-MM THK) | |
| 29. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 30. | 149-2582 | [1] | PLATE AS | |
| 31. | 187-1878 | [1] | WASHER-PLASTIC (8.1X19X3.2-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES 5P8500 KEY | |||
| M | METRIC PART | |||
#SEBP25270906
184-6177: SUPPORT GP-HYDRAULIC CONTROL
184-6177 SUPPORT GP-HYDRAULIC CONTROL
S/N 4BS534-UP
PART OF 122-9508 CAB AR, 154-7710 CANOPY AR-OPEN ROPS
S/N 4BS534-UP
PART OF 122-9508 CAB AR, 154-7710 CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3K-4897 | [1] | PIN-SPRING | |
| 2. | 9X-2027 | [1] | WASHER (11X18X2-MM THK) | |
| 3. | 4E-6523 | [1] | SUPPORT-SLIDE | |
| 4. | 4E-6526 | [1] | CUSHION AS (RH) | |
| 5. | 4E-8722 | [4] | NUT (RETAINER) | |
| 6. | 4E-9173 | [2] | SHAFT-CONTROL | |
| 7. | 4E-9174 | [2] | BEARING | |
| 8. | 6V-9327 M | [4] | SETSCREW-SOCKET (M6X1-THD) | |
| 9. | 7V-0445 | [1] | SPRING | |
| 10. | 7X-3310 | [1] | KNOB-BALL | |
| 11. | 8Y-5746 | [1] | ASHTRAY | |
| 12. | 8Y-6333 | [1] | GASKET (ASHTRAY) | |
| 13. | 9U-0952 | [1] | PIN | |
| 14. | 9U-0953 | [1] | GUIDE | |
| 15. | 9U-0954 | [1] | STUD | |
| 16. | 9U-0955 | [1] | PIN | |
| 17. | 9U-0958 | [1] | SLIDER | |
| 18. | 9U-3925 | [4] | RING-RETAINING | |
| 19. | 9U-3926 | [2] | STOP | |
| 20. | 9U-3927 | [1] | BEARING | |
| 21. | 9W-0335 | [1] | LIGHTER AS-CIGAR (24-VOLT) | |
| 22. | 9W-1991 | [1] | SPACER (10.7X17.1X40-MM THK) | |
| 23. | 127-0323 | [1] | LEVER AS | |
| 24. | 127-5480 | [1] | BRACKET AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 25. | 137-6841 B | [2] | SHIM (0.2-MM THK) | |
| 26. | 170-0489 | [1] | HOUSING | |
| 27. | 170-0976 | [1] | BRACKET AS | |
| 28. | 211-4942 | [2] | KNOB AS | |
| 29. | 176-0822 | [1] | BRACKET AS | |
| 30. | 184-6462 | [1] | HOUSING | |
| 31. | 099-3649 M | [4] | BOLT (M8X1.25X40-MM) | |
| 32. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
| 33. | 7C-4354 | [1] | CLIP | |
| 34. | 7X-0575 | [2] | WASHER-HARD (10.2X22.5X5-MM THK) | |
| 35. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 36. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 37. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 38. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 39. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 40. | 8T-6869 M | [1] | BOLT (M8X1.25X60-MM) | |
| 41. | 9N-0869 | [2] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 42. | 9X-2038 | [8] | WASHER (7X19X2-MM THK) | |
| 43. | 9X-2044 M | [8] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 44. | 9X-2616 M | [2] | SCREW-SOCKET (M8X1.25X16-MM) | |
| 45. | 203-0328 | [1] | SPACER (16X19X9-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP25270907
149-8034: SUPPRESSION GP-CAB SOUND
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS#SEBP25270908
119-7027: SUSPENSION GP-SEAT
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 102-6317 | [2] | BUMPER | |
| 3. | 8Y-6917 | [1] | BOOT | |
| 4. | 123-8157 | [2] | SHAFT | |
| 5. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 6. | 4V-8556 | [1] | BOLT (3/8-16X2.20-IN) | |
| 7. | 8Y-6922 | [1] | HOUSING AS | |
| 8. | 5P-8167 | [1] | BOLT (3/8-16X0.625-IN) | |
| 9. | 8M-3267 | [1] | SCREW-HEX SOCKET (3/8-16X0.75-IN) | |
| 10. | 3H-5841 | [1] | BOLT (3/8-16X1-IN) | |
| 11. | 123-9131 | [1] | ABSORBER AS-SHOCK | |
| 12. | 1B-4430 | [4] | NUT-JAM (1/2-20-THD) | |
| 13. | 3J-4818 | [4] | LOCKWASHER (EXTERNAL TOOTH) | |
| 14. | 4B-4278 | [3] | WASHER (10.2X20.5X1.6-MM THK) | |
| 15. | 4V-7884 | [2] | BEARING | |
| 16. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 17. | 5R-7545 E | TUBE-NYLON (38-CM) | ||
| 18. | 9M-0164 | [1] | CLAMP-HOSE | |
| 19. | 6K-0806 | [1] | STRAP-CABLE | |
| 20. | 8L-8413 | [4] | STRAP-CABLE (WHITE) | |
| 21. | 124-7128 | [1] | BUSHING-RELIEF | |
| 22. | 124-7126 | [1] | SCISSORS AS | |
| 23. | 128-0613 | [1] | KIT-TETHER | |
| (INCLUDES TETHERS) | ||||
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 8Y-6928 | [1] | KIT-FASTENER | ||
| (INCLUDES CLIPS) | ||||
| 124-6329 | [1] | KIT-AIR SPRING | ||
| (INCLUDES FITTING & SPRING) | ||||
| 124-7129 | [1] | KIT-VALVE | ||
| (INCLUDES FITTING & VALVE) | ||||
| 124-7125 | [1] | KIT-HOUSING | ||
| (INCLUDES HOUSING, BRACKET, BLOCKS, SETSCREWS & BOLT) | ||||
| 123-9128 | [1] | KIT-ROLLER | ||
| (INCLUDES BEARINGS, ROLLERS & TIE WRAP) | ||||
| 124-7127 | [1] | KIT-AIR COMPRESSOR | ||
| (INCLUDES COMPRESSOR AS, CLAMP, TUBES & TIE WRAPS) | ||||
| E | ORDER BY THE CENTIMETER | |||
#SEBP25270909
150-7718: SUSPENSION GP-SEAT
150-7718 SUSPENSION GP-SEAT -AIR
S/N 4BS1-493
PART OF 109-8200, 135-5188 SEAT GP-SUSPENSION
S/N 4BS1-493
PART OF 109-8200, 135-5188 SEAT GP-SUSPENSION
For full view, you need register
Parts for your 950G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4V-7884 | [2] | BEARING | |
| 2. | 3H-5841 | [1] | BOLT (3/8-16X1-IN) | |
| 3. | 4V-8556 | [1] | BOLT (3/8-16X2.20-IN) | |
| 4. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 5. | 5P-8167 | [1] | BOLT (3/8-16X0.625-IN) | |
| 6. | 8Y-6917 | [1] | BOOT | |
| 7. | 102-6317 | [2] | BUMPER | |
| 8. | 124-7128 | [1] | BUSHING-RELIEF | |
| 9. | 9M-0164 | [1] | CLAMP-HOSE | |
| 10. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 11. | 147-4549 | [1] | FITTING-ELBOW | |
| 12. | 149-2400 | [1] | FITTING | |
| 13. | 149-2399 | [1] | FITTING | |
| 14. | 8Y-6922 | [1] | HOUSING AS | |
| 15. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 16. | 3J-4818 | [4] | LOCKWASHER (EXTERNAL TOOTH) | |
| 17. | 1B-4430 | [4] | NUT-JAM (1/2-20-THD) | |
| 18. | 124-7126 | [1] | SCISSORS AS | |
| 19. | 8M-3267 | [1] | SCREW-HEX SOCKET (3/8-16X0.75-IN) | |
| 20. | 123-8157 | [2] | SHAFT | |
| 21. | 123-9131 | [1] | ABSORBER AS-SHOCK | |
| 22. | 147-6522 | [1] | SPRING | |
| 23. | 6K-0806 | [1] | STRAP-CABLE | |
| 24. | 8L-8413 | [4] | STRAP-CABLE (WHITE) | |
| 25. | 149-2403 | [1] | VALVE AS | |
| 26. | 153-0088 | [3] | WASHER-HARD (10.31X20X1.65-MM THK) | |
| 27. | 147-6541 BE | TUBE | ||
| 28. | 147-6541 BE | TUBE | ||
| 29. | 160-7765 | [1] | WASHER (16.26X22.23X1.97-MM THK) | |
| 30. | 160-7766 | [3] | WASHER (16.26X22.23X0.51-MM THK) | |
| 31. | 160-7767 | [8] | WASHER (3.68X12.57X0.51-MM THK) | |
| 32. | NZ | [4] | BEARING-FLANGED | |
| 33. | NZ | [4] | ROLLER | |
| 34. | NZ | [1] | WRAP-TIE (SMALL) | |
| 35. | JZ | [1] | HOUSING-UPPER | |
| 36. | JZ | [1] | BRACKET-RH | |
| 37. | PZ | [2] | TETHER | |
| 38. | LZ | [30] | CLIP (RATCHET) | |
| 39. | SZ | [1] | COMPRESSOR AS | |
| 40. | SZ | [1] | SLEEVE ((190.5MMX12.7MM DIA)) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 8Y-6928 L | [1] | KIT-FASTENER | ||
| 123-9128 N | [1] | KIT-ROLLER | ||
| 124-7125 J | [1] | KIT-HOUSING | ||
| 128-0613 P | [1] | KIT-TETHER | ||
| 149-2398 S | [1] | KIT-AIR COMPRESSOR | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| L | KIT MARKED L INCLUDES PART(S) MARKED L | |||
| N | KIT MARKED N INCLUDES PART(S) MARKED N | |||
| P | KIT MARKED P INCLUDES PART(S) MARKED P | |||
| S | KIT MARKED S INCLUDES PART(S) MARKED S | |||
| Z | NOT SERVICED SEPARATELY | |||
