160-8408 VALVE GP-MODULATING -TRANSMISSION CLUTCH-TRANSMISSION CLUTCH S/N BSA1-99999; 9JY1-99999 24 VOLT DC PART OF 176-0054, 186-2521 CONTROL GP-TRANSMISSION HYD 950G

POWER TRAIN

VALVE GP-MODULATING

0. 160-8408 VALVE GP-M

VALVE GP-RELIEF

1. 115-4551 VALVE GP-R

WHEEL GP

2. 2D-2511 VALVE GP-T

FRAME AND BODY

GUARD GP

3. 124-4236 ACTUATOR G
4. 161-4002 ACTUATOR G
5. 210-2613 ACTUATOR G

CONVERSION GP

6. 139-2949 CONVERSION
7. 139-2949 CONVERSION
8. 139-2949 CONVERSION
9. 139-4017 CONVERSION
0. INFORMATION

WHEEL LOADER 950G WHEEL LOADER 2JS
950G Wheel Loader 2JS00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2529 950G 2JS (1997)

POWER TRAIN

VALVE GP-MODULATING

121-0357 VALVE GP-MODULATING

121-4298 VALVE GP-MODULATING

159-0932 VALVE GP-MODULATING

160-8408 VALVE GP-MODULATING

#SEBP25290400

160-8408: VALVE GP-MODULATING

VALVE GP-MODULATING

160-8408 VALVE GP-MODULATING -TRANSMISSION CLUTCH-TRANSMISSION CLUTCH
S/N BSA1-99999; 9JY1-99999
24 VOLT DC
PART OF 176-0054, 186-2521 CONTROL GP-TRANSMISSION HYD

i01222616 SEBP2529

1608408 VALVE GP-MODULATING Parts scheme

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-3965	[1]	FITTING (QUICK DISCONNECT)
2.	145-1144	[1]	COIL AS
3.	167-9524	[1]	NUT-SELF LOCKING (1/2-28-THD)
4.	Z		VALVE AS
5.	164-2108	[1]	WASHER (13.03X25.4X2.38-MM THK)
6.	3J-1907	[1]	SEAL-O-RING
	Z		NOT SERVICED SEPARATELY

#SEBP25290401

115-4551: VALVE GP-RELIEF

VALVE GP-RELIEF

115-4551 VALVE GP-RELIEF -TRANSMISSION HYDRAULIC CONTROL
S/N BSA1-99999; 2SY1-99999; 9JY1-99999
PART OF 117-5756, 176-0054, 186-2521 CONTROL GP-TRANSMISSION HYD

i00755502 SEBP2529

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2S-4663	[1]	SEAL-O-RING
2.	6V-3965	[2]	FITTING (QUICK DISCONNECT)
3.	3J-1907	[4]	SEAL-O-RING
4.	6V-0852	[2]	CAP-DUST
5.	9S-8006	[1]	PLUG (7/8-14-THD)
6.	2M-9780	[1]	SEAL-O-RING
7.	115-4550	[1]	COVER
8.	9M-2110	[1]	COVER-ADJUSTMENT
9.	9S-8001	[3]	PLUG
10.	4J-7533	[3]	SEAL-O-RING
11.	6V-5218 M	[2]	BOLT (M8X1.25X35-MM)
12.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
13.	6V-3940 M	[2]	BOLT (M8X1.25X25-MM)
14.	8E-1143	[1]	SLUG
15.	9U-8668	[1]	SPOOL AS
	3D-8317	[1]	RING-RETAINING
	4B-9880	[1]	BALL
	4M-2381	[1]	SPRING
	8E-9893	[1]	SPOOL-RELIEF
	9U-8669	[1]	RETAINER
16.	1M-9351	[1]	SPRING
17.	2S-5835	[1]	PISTON-LOAD
18.	4M-5905	[1]	SCREW-ADJUSTMENT (5/16-18X1-IN)
19.	8M-5253	[1]	SEAL-O-RING
20.	6V-0484	[2]	ELBOW
	M		METRIC PART

#SEBP25290402

2D-2511: VALVE GP-TIRE

VALVE GP-TIRE

2D-2511 VALVE GP-TIRE
S/N 2JS1-UP
PART OF 138-2373 RIM AR, 131-2777, 206-9278 RIM GP-DEMOUNTABLE

i00876166 SEBP2529

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3D-2239	[1]	VALVE AS-TIRE
1A.	6F-3930	[1]	CORE-VALVE
1B.	9K-7951	[1]	CAP-VALVE
2.	7D-5252	[1]	SPUD AS
2A.	2D-2507	[1]	SPUD
2B.	2D-2508	[1]	GROMMET
2C.	2D-2509	[1]	LOCKNUT (11/16-16-THD)

#SEBP25290403

124-4236: ACTUATOR GP-POWER

ACTUATOR GP-POWER

124-4236 ACTUATOR GP-POWER
S/N 2JS1-UP
PART OF 124-4240 TILT GP-HOOD

i00727567 SEBP2529

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	117-1556	[1]	HEAD AS-POWER
2.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
3.	122-4233	[1]	WIPER
4.	124-2822	[1]	ROD END
5.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4133 M	[4]	NUT (M10X1.5-THD)
7.	117-1559	[1]	MOUNT AS
8.	124-4237	[1]	POST AS
9.	117-1557	[1]	MOTOR AS
10.	8N-1540	[1]	PIN-CONNECTOR (12-GA TO 14-GA)
11.	8N-1541	[1]	SOCKET-CONNECTOR (12-GA TO 14-GA)
12.	129-7163	[1]	PLUG AS-CONNECTOR (1-PIN)
13.	129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	M		METRIC PART

#SEBP25290404

161-4002: ACTUATOR GP-POWER

ACTUATOR GP-POWER

161-4002 ACTUATOR GP-POWER
S/N 2JS1-1762
PART OF 124-4240 TILT GP-HOOD

i01032332 SEBP2529

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	161-4006	[1]	HEAD AS-POWER
2.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
3.	122-4233	[1]	WIPER
4.	161-4008	[1]	ROD END
5.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4133 M	[4]	NUT (M10X1.5-THD)
7.	117-1559	[1]	MOUNT AS
8.	161-4005	[1]	POST AS
9.		[1]	MOTOR AS
10.	8N-1540	[1]	PIN-CONNECTOR (12-GA TO 14-GA)
11.	8N-1541	[1]	SOCKET-CONNECTOR (12-GA TO 14-GA)
12.	129-7163	[1]	PLUG AS-CONNECTOR (1-PIN)
13.	129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	M		METRIC PART

#SEBP25290405

210-2613: ACTUATOR GP-POWER

ACTUATOR GP-POWER

210-2613 ACTUATOR GP-POWER
S/N 2JS1763-99999
PART OF 124-4240 TILT GP-HOOD

i01596177 SEBP2529

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	117-1559	[1]	MOUNT AS
2.	122-4233	[1]	WIPER
3.	262-4917	[1]	POST AS
	203-6473	[1]	GASKET
4.	262-4918	[1]	POWERHEAD AS
5.	179-4324 JM	[2]	LOCKNUT (M5X0.8-THD)
6.	168-2166 J	[1]	GASKET-MOTOR
7.	203-6473 J	[1]	GASKET
8.	205-6029	[1]	MOTOR AS-ELECTRIC (HOOD TILT)
	8N-1540	[1]	PIN-CONNECTOR (12-GA TO 14-GA)
	8N-1541	[1]	SOCKET-CONNECTOR (12-GA TO 14-GA)
	129-7163	[1]	PLUG AS-CONNECTOR (1-PIN)
	129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
9.	212-6854	[1]	ROD END
10.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
11.	8T-4133 M	[4]	NUT (M10X1.5-THD)
12.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
13.	171-3716 J	[1]	GASKET-COVER

			AVAILABLE REPAIR KIT(S):
	203-6470 J		KIT-GASKET
	J		KIT(S) MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP25290406

139-2949: CONVERSION AR-ROADING

CONVERSION AR-ROADING

139-2949 CONVERSION AR-ROADING
S/N 2JS1-UP
ITALIAN MARKET

i00969847 SEBP2529

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
151-5061	[2]	BAR
6C-7485	[1]	BLOCK
8T-4182 M	[6]	BOLT (M10X1.5X45-MM)
8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
8T-5412 M	[2]	BOLT (M12X1.75X140-MM)
8T-4956 M	[4]	BOLT (M12X1.75X35-MM)
8T-4138 M	[4]	BOLT (M6X1X20-MM)
8T-3844 M	[4]	BOLT (M6X1X70-MM)
124-3112	[2]	BRACKET
163-8396	[1]	BRACKET AS
163-8394	[1]	BRACKET AS
148-9025	[1]	BRACKET (LH)
148-9026	[1]	BRACKET (RH)
6C-7607	[2]	CHAIN AS
		(EACH INCLUDES)
6C-7606	[2]	ROD
8M-2772	[1]	CLIP (LOOP)
6C-0076	[1]	CONNECTOR
6C-7580	[8]	COVER-WORK LIGHT
6C-7320	[2]	FILM-STRIPE (RED, WHITE)
6C-7590	[2]	FILM (RED, WHITE STRIPES)
124-4131	[1]	FILM-REFLECTOR (RED, WHITE STRIPES)
161-2473	[1]	FILM-REFLECTOR (RED, WHITE STRIPES, LH)
161-2474	[1]	FILM-REFLECTOR (RED, WHITE STRIPES, RH)
9L-6074	[1]	GROMMET
124-2541	[1]	GUARD AS
115-0817	[1]	HARNESS AS-LIGHTING (REGISTRATION)
6C-7597	[1]	HARNESS AS-LIGHTING (BUCKET)
125-4439	[1]	LAMP AS (24-VOLT, 5-WATT)
6C-7591	[2]	LAMP GP
150-3918 Y	[1]	LIGHTING GP-WARNING BEACON
5P-8837	[2]	LOCK PIN
8T-4133 M	[6]	NUT (M10X1.5-THD)
5C-2890 M	[11]	NUT (M6X1-THD)
5C-8312 M	[4]	NUT (M4X0.7-THD)
8T-4244 M	[2]	NUT (M12X1.75-THD)
139-3058	[1]	PIN GP-LIFT ARM
6C-7476	[1]	PLATE
6C-7316	[1]	PLATE
6C-7159	[1]	PLATE
6C-7589	[2]	PLATE
6C-7319	[2]	PLATE AS
		(EACH INCLUDES)
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
6C-5736	[2]	REFLECTOR (RED)
6C-5712	[2]	REFLECTOR (AMBER)
158-1202	[2]	REFLECTOR (RED)
6V-7697	[2]	SCREW-MACHINE (8-32X1.25-IN)
6V-9672 M	[4]	SCREW-MACHINE (M4X0.7X16-MM)
8F-0492	[2]	SPACER (0.531X1.125X0.625-IN THK)
6C-8664	[4]	SPACER
6C-7608	[2]	SPRING
3S-2093	[6]	STRAP-CABLE
7X-7877 E		STRIP-EDGE (176CM)
4B-4274	[2]	WASHER (5.5X13X1.2-MM THK)
9X-8256	[8]	WASHER (6.6X12X2-MM THK)
1B-1067	[4]	WASHER (13.5X50.8X11.1-MM THK)
8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
096-6166	[4]	WASHER-HARD (4.5X9X1-MM THK)
8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
107-8465	[1]	WIRE AS
E		ORDER BY THE CENTIMETER
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP25290407

139-2949: CONVERSION AR-ROADING

CONVERSION AR-ROADING

139-2949 CONVERSION AR-ROADING
S/N 2JS1762-UP
ITALIAN MARKET

i01551045 SEBP2529

1392949 CONVERSION AR-ROADING Parts scheme

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[3]	STRAP-CABLE
2.	5P-8837	[2]	LOCK PIN
3.	6C-0076	[1]	CONNECTOR
4.	6C-5712	[2]	REFLECTOR (AMBER)
5.	6C-5736	[2]	REFLECTOR (RED)
6.	6C-7159	[1]	PLATE
7.	6C-7316	[1]	PLATE
8.	6C-7319	[2]	PLATE AS
			(EACH INCLUDES)
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
9.	6C-7320	[2]	FILM-STRIPE (RED, WHITE)
10.	6C-7476	[1]	PLATE
11.	6C-7485	[1]	BLOCK
12.	6C-7580	[6]	COVER-WORK LIGHT
13.	6C-7581	[1]	LAMP GP-REGISTRATION PLATE (24-VOLT, 10-WATT)
	5C-8315	[1]	LAMP (24-VOLT, 10-WATT)
14.	6C-7589	[2]	PLATE
15.	6C-7590	[2]	FILM (RED, WHITE STRIPES)
16.	6C-7591	[2]	LAMP GP
	6C-8013	[1]	LAMP
17.	6C-7597	[1]	HARNESS AS-LIGHTING (BUCKET)
18.	6C-7607	[2]	CHAIN AS
			(EACH INCLUDES)
	6C-7606	[2]	ROD
19.	6C-7608	[2]	SPRING
20.	6C-8664	[4]	SPACER
21.	8F-0492	[2]	SPACER (0.531X1.125X0.625-IN THK)
22.	9X-8937	[4]	TACK
23.	107-8465	[1]	WIRE AS
24.	124-2541	[1]	GUARD AS
25.	124-3112	[2]	BRACKET
26.	124-4131	[1]	FILM-REFLECTOR (RED, WHITE STRIPES)
27.	139-3058	[1]	PIN GP-LIFT ARM
28.	148-9025	[1]	BRACKET (LH)
29.	148-9026	[1]	BRACKET (RH)
30.	150-3918 Y	[1]	LIGHTING GP-WARNING BEACON
31.	154-8498	[1]	HARNESS AS-LIGHTING (RUNNING LIGHTS, LICENSE PLATE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
32.	158-1202	[2]	REFLECTOR (RED)
33.	159-7342	[1]	PLATE-INFORMATION (MAXIMUM WEIGHT)
34.	161-2473	[1]	FILM-REFLECTOR (RED, WHITE STRIPES, LH)
35.	161-2474	[1]	FILM-REFLECTOR (RED, WHITE STRIPES, RH)
36.	163-8394	[1]	BRACKET AS
37.	163-8396	[1]	BRACKET AS
38.	198-9096	[1]	FILM-IDENTIFICATION (BUCKET, BRACKET)
39.	198-9098	[2]	FILM-WARNING (KEEP AWAY FROM MACHINE)
40.	096-6166	[4]	WASHER-HARD (4.5X9X1-MM THK)
41.	198-9099	[1]	FILM-INFORMATION (REFLECTOR, 40-KM)
42.	4B-4274	[2]	WASHER (5.5X13X1.2-MM THK)
43.	5C-2890 M	[8]	NUT (M6X1-THD)
44.	5C-8312 M	[4]	NUT (M4X0.7-THD)
45.	6V-7697	[2]	SCREW-MACHINE (8-32X1.25-IN)
46.	6V-9672 M	[4]	SCREW-MACHINE (M4X0.7X16-MM)
47.	8M-2772	[1]	CLIP (LOOP)
48.	8T-4121	[7]	WASHER-HARD (11X21X2.5-MM THK)
49.	8T-4133 M	[4]	NUT (M10X1.5-THD)
50.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
51.	8T-4138 M	[8]	BOLT (M6X1X20-MM)
52.	8T-4182 M	[6]	BOLT (M10X1.5X45-MM)
53.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
54.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
55.	8T-4244 M	[2]	NUT (M12X1.75-THD)
56.	8T-5412 M	[2]	BOLT (M12X1.75X140-MM)
57.	9L-6074	[1]	GROMMET
58.	9X-8256	[8]	WASHER (6.6X12X2-MM THK)
59.	7X-7877 E		STRIP-EDGE (200CM)
	7X-0563 F	[4]	WASHER-HARD (12X35X8-MM THK)
	151-5061 F	[2]	BAR
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25290408

139-2949: CONVERSION AR-ROADING

CONVERSION AR-ROADING

139-2949 CONVERSION AR-ROADING
S/N 2JS1763-99999
ITALIAN MARKET

i01606949 SEBP2529

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[3]	STRAP-CABLE
2.	5P-8837	[2]	LOCK PIN
3.	6C-0076	[1]	CONNECTOR
4.	6C-5712	[2]	REFLECTOR (AMBER)
5.	6C-5736	[2]	REFLECTOR (RED)
6.	6C-7159	[1]	PLATE
7.	6C-7316	[1]	PLATE
8.	6C-7319	[2]	PLATE AS
			(EACH INCLUDES)
	8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
9.	6C-7320	[2]	FILM-STRIPE (RED, WHITE)
10.	6C-7476	[1]	PLATE
11.	6C-7485	[1]	BLOCK
12.	6C-7580	[6]	COVER-WORK LIGHT
13.	6C-7581	[1]	LAMP GP-REGISTRATION PLATE (24-VOLT, 10-WATT)
	5C-8315	[1]	LAMP (24-VOLT, 10-WATT)
14.	6C-7589	[2]	PLATE
15.	6C-7590	[2]	FILM (RED, WHITE STRIPES)
16.	6C-7591	[2]	LAMP GP
	6C-8013	[1]	LAMP
17.	6C-7597	[1]	HARNESS AS-LIGHTING (BUCKET)
18.	6C-7607	[2]	CHAIN AS
			(EACH INCLUDES)
	6C-7606	[2]	ROD
19.	6C-7608	[2]	SPRING
20.	6C-8664	[4]	SPACER
21.	8F-0492	[2]	SPACER (0.531X1.125X0.625-IN THK)
22.	9X-8937	[4]	TACK
23.	107-8465	[1]	WIRE AS
24.	124-2541	[1]	GUARD AS
25.	124-3112	[2]	BRACKET
26.	124-4131	[1]	FILM-REFLECTOR (RED, WHITE STRIPES)
27.	139-3058	[1]	PIN GP-LIFT ARM
28.	148-9025	[1]	BRACKET (LH)
29.	148-9026	[1]	BRACKET (RH)
30.	150-3918 Y	[1]	LIGHTING GP-WARNING BEACON
31.	208-0255 C	[1]	HARNESS AS-LIGHTING (RUNNING LIGHTS, LICENSE PLATE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
32.	158-1202	[2]	REFLECTOR (RED)
33.	159-7342	[1]	PLATE-INFORMATION (MAXIMUM WEIGHT)
34.	161-2473	[1]	FILM-REFLECTOR (RED, WHITE STRIPES, LH)
35.	161-2474	[1]	FILM-REFLECTOR (RED, WHITE STRIPES, RH)
36.	163-8394	[1]	BRACKET AS
37.	163-8396	[1]	BRACKET AS
38.	198-9096	[1]	FILM-IDENTIFICATION (BUCKET, BRACKET)
39.	198-9098	[2]	FILM-WARNING (KEEP AWAY FROM MACHINE)
40.	096-6166	[4]	WASHER-HARD (4.5X9X1-MM THK)
41.	198-9099	[1]	FILM-INFORMATION (REFLECTOR, 40-KM)
42.	4B-4274	[2]	WASHER (5.5X13X1.2-MM THK)
43.	5C-2890 M	[8]	NUT (M6X1-THD)
44.	5C-8312 M	[4]	NUT (M4X0.7-THD)
45.	6V-7697	[2]	SCREW-MACHINE (8-32X1.25-IN)
46.	6V-9672 M	[4]	SCREW-MACHINE (M4X0.7X16-MM)
47.	8M-2772	[1]	CLIP (LOOP)
48.	8T-4121	[7]	WASHER-HARD (11X21X2.5-MM THK)
49.	8T-4133 M	[4]	NUT (M10X1.5-THD)
50.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
51.	8T-4138 M	[8]	BOLT (M6X1X20-MM)
52.	8T-4182 M	[6]	BOLT (M10X1.5X45-MM)
53.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
54.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
55.	8T-4244 M	[2]	NUT (M12X1.75-THD)
56.	8T-5412 M	[2]	BOLT (M12X1.75X140-MM)
57.	9L-6074	[1]	GROMMET
58.	9X-8256	[8]	WASHER (6.6X12X2-MM THK)
59.	7X-7877 E		STRIP-EDGE (200CM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25290409

139-4017: CONVERSION AR-ROADING

CONVERSION AR-ROADING

139-4017 CONVERSION AR-ROADING
S/N 2JS1-UP
GERMAN

i00776935 SEBP2529

1394017 CONVERSION AR-ROADING Parts scheme

For full view, you need register

Parts for your 950G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[3]	STRAP-CABLE
2.	6C-5712	[6]	REFLECTOR (AMBER)
3.	6C-5736	[2]	REFLECTOR (RED)
4.	6C-7158	[1]	HARNESS AS-LIGHTING (REAR TURN, MARKER LIGHTS)
5.	6C-7159	[1]	PLATE
6.	6C-7224	[2]	BRACKET AS
7.	6C-7227	[2]	CHOCK-WHEEL
8.	6C-7875	[8]	RIVET-POP
9.	7C-6921	[2]	SPACER (11X20X22.8-MM THK)
10.	9X-8937	[4]	TACK
11.	103-4816	[1]	PIN AS
	6C-5575	[1]	CABLE
12.	108-1786	[3]	FILM-IDENTIFICATION (40-KM/H)(40 KPH)
13.	109-6502	[2]	PANEL-REFLECTOR
14.	109-8203 Y	[1]	MIRROR GP-REAR VIEW (INTERIOR)
15.	110-3731	[1]	ROD
16.	113-7634	[1]	FILM-WARNING (STEERING)
17.	115-1278	[2]	BAR
18.	115-1279	[1]	PLATE
19.	115-5774	[2]	LAMP AS (24-VOLT)
20.	115-5777	[1]	HARNESS AS-LIGHTING (FRONT TURN, POSITION LIGHTS)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
21.	125-4439	[2]	LAMP AS (24-VOLT, 5-WATT)
22.	148-9025	[1]	BRACKET (LH)
23.	148-9026	[1]	BRACKET (RH)
24.	115-0817	[1]	HARNESS AS-LIGHTING (REGISTRATION)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
25.	158-1202	[2]	REFLECTOR (RED)
26.	159-7342	[1]	PLATE-INFORMATION (MAXIMUM WEIGHT)
27.	161-2473	[1]	FILM-REFLECTOR (RED, WHITE STRIPES, LH)
28.	161-2474	[1]	FILM-REFLECTOR (RED, WHITE STRIPES, RH)
29.	167-7327	[1]	PLATE AS (LH)
30.	167-7328	[1]	PLATE AS (RH)
31.	174-7350	[1]	GUARD AS (LH)
32.	174-7351	[1]	GUARD AS (RH)
33.	204-6920	[1]	FILM
34.	4B-4274	[4]	WASHER (5.5X13X1.2-MM THK)
35.	5C-2890 M	[16]	NUT (M6X1-THD)
36.	5P-1075	[4]	WASHER-HARD (10.2X22.5X3-MM THK)
37.	6V-7697	[2]	SCREW-MACHINE (8-32X1.25-IN)
38.	7B-8839	[2]	NUT-WING (3/8-24-THD)
39.	7X-7729	[8]	WASHER (11X25X3-MM THK)
40.	8T-3844 M	[4]	BOLT (M6X1X70-MM)
41.	8T-4133 M	[4]	NUT (M10X1.5-THD)
42.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
43.	8T-4138 M	[12]	BOLT (M6X1X20-MM)
44.	8T-4182 M	[2]	BOLT (M10X1.5X45-MM)
45.	8T-4186 M	[6]	BOLT (M10X1.5X40-MM)
46.	8T-8888	[2]	BOLT (3/8-24X2.75-IN)
47.	9R-5008	[2]	SPACER (11X20X6-MM THK)
48.	9X-8256 B	[24]	WASHER (6.6X12X2-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

POWER TRAIN

VALVE GP-MODULATING

Technical Information Bulletin

Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC)
Transmissions Equipped With Electronic Clutch Pressure Controls (ECPC)

For Calibration Of Transmission Clutch Engagement - Use Only 4C-8195 Control Service Tool
For Calibration Of Transmission Clutch Engagement - Use Only 4C-8195 Control Service Tool

Modulating Valve Connectors May Not Be Fully Seated
Modulating Valve Connectors May Not Be Fully Seated

New Software Corrects Calibration Failures
New Software Corrects Calibration Failures

ECPC Valves May Fail on Cat Transmission Systems {3073, 3139, 3167}
ECPC Valves May Fail on Cat Transmission Systems {3073, 3139, 3167}

Specifications

Modulating Valve (Transmission Clutch)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train

Systems Operation

Modulating Valve (Transmission Clutch)
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Power Train

Testing and Adjusting

Transmission Pressures - Test and Adjust
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0631 FMI 03 Modulating Valve (Clutch 1 Solenoid) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0631 FMI 05 Modulating Valve (Clutch 1 Solenoid) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0631 FMI 06 Modulating Valve (Clutch 1 Solenoid) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0631 FMI 07 Modulating Valve (Clutch 1 Solenoid) Improper Mechanical Response - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0631 FMI 13 Modulating Valve (Clutch 1 Solenoid) Out of Calibration - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0632 FMI 03 Modulating Valve (Clutch 2 Solenoid) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0632 FMI 05 Modulating Valve (Clutch 2 Solenoid) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0632 FMI 06 Modulating Valve (Clutch 2 Solenoid) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0632 FMI 07 Modulating Valve (Clutch 2 Solenoid) Improper Mechanical Response - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0633 FMI 03 Modulating Valve (Clutch 3 Solenoid) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0633 FMI 05 Modulating Valve (Clutch 3 Solenoid) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0633 FMI 06 Modulating Valve (Clutch 3 Solenoid) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0633 FMI 07 Modulating Valve (Clutch 3 Solenoid) Improper Mechanical Response - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0633 FMI 13 Modulating Valve (Clutch 3 Solenoid) Out of Calibration - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0634 FMI 03 Modulating Valve (Clutch 4 Solenoid) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0634 FMI 05 Modulating Valve (Clutch 4 Solenoid) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0634 FMI 06 Modulating Valve (Clutch 4 Solenoid) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0634 FMI 07 Modulating Valve (Clutch 4 Solenoid) Improper Mechanical Response - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0634 FMI 13 Modulating Valve (Clutch 4 Solenoid) Out of Calibration - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0635 FMI 03 Modulating Valve (Clutch 5 Solenoid) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0635 FMI 05 Modulating Valve (Clutch 5 Solenoid) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0635 FMI 06 Modulating Valve (Clutch 5 Solenoid) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0635 FMI 07 Modulating Valve (Clutch 5 Solenoid) Improper Mechanical Response - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0635 FMI 13 Modulating Valve (Clutch 5 Solenoid) Out of Calibration - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0636 FMI 03 Modulating Valve (Clutch 6 Solenoid) Voltage Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0636 FMI 05 Modulating Valve (Clutch 6 Solenoid) Current Below Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0636 FMI 06 Modulating Valve (Clutch 6 Solenoid) Current Above Normal - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0636 FMI 07 Modulating Valve (Clutch 6 Solenoid) Improper Mechanical Response - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0636 FMI 13 Modulating Valve (Clutch 6 Solenoid) Out of Calibration - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

CID 0632 FMI 13 Modulating Valve (Clutch 2 Solenoid) Out of Calibration - Test
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

Fill Time for the Transmission Clutch - Calibrate
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

Engagement Pressure for the Transmission Clutch - Calibrate
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

Calibration and Programming
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Power Train

Disassembly and Assembly

Modulating Valve (Transmission Clutch) - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train

Modulating Valve (Transmission Clutch) - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train

Modulating Valve (Transmission Clutch) - Disassemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train

Modulating Valve (Transmission Clutch) - Assemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train

Service Magazine

An Improved Modulating Valve is Available for Transmissions {3139}
2001/07/30

Caterpillar Parts SIS Catalog 950G :

159-0932 VALVE GP-MODULATING

121-4298 VALVE GP-MODULATING

121-0357 VALVE GP-MODULATING

115-1654 UNIVERSAL JOINT GP

115-1650 UNIVERSAL JOINT GP

186-2524 TRANSMISSION AR

176-0056 TRANSMISSION AR

114-8945 TRANSMISSION AR

115-4551 VALVE GP-RELIEF

2D-2511 VALVE GP-TIRE

124-4236 ACTUATOR GP-POWER

161-4002 ACTUATOR GP-POWER

210-2613 ACTUATOR GP-POWER

139-2949 CONVERSION AR-ROADING

Truck sale:

Caterpillar 950G
- Wheel Loaders
ZIEGLER CAT

129,900

Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT

185,000

Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO

190,000

Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
ZIEGLER CAT

215,000

Caterpillar 950GC, Wheel Loaders, Construction
- Wheel Loaders
THOMPSON TRACTOR CO., INC.