120-6947 VALVE & MTG GP-MAIN CONTROL -3-FUNCTION S/N 3BS1-99999 PART OF 143-5030 HYDRAULIC AR-3 VALVE 962G

HYDRAULIC SYSTEM

VALVE GP-CONTROL

0. 120-6947 VALVE & MT
1. 126-7734 VALVE & MT
2. 130-5463 VALVE & MT
3. 118-5095 VALVE GP-C

VALVE GP-DIVERTER

4. 160-7116 VALVE GP-D
5. 160-7116 VALVE GP-D
6. 180-8585 VALVE GP-D

VALVE GP-LOWERING CONTROL

7. 154-5713 VALVE GP-L

VALVE GP-CONTROL

8. 120-4577 VALVE GP-M
9. 120-4581 VALVE GP-M
0. INFORMATION

WHEEL LOADER 962G WHEEL LOADER 3BS
962G Wheel Loader 3BS00001-UP (MACHINE) POWERED BY 3126 Engine SEBP2530 962G 3BS (1997)

HYDRAULIC SYSTEM

VALVE GP-CONTROL

112-6998 VALVE & MTG GP-MAIN CONTROL

120-6947 VALVE & MTG GP-MAIN CONTROL

126-7734 VALVE & MTG GP-MAIN CONTROL

130-5463 VALVE & MTG GP-MAIN CONTROL

118-5095 VALVE GP-CONTROL

120-4577 VALVE GP-MAIN CONTROL

120-4581 VALVE GP-MAIN CONTROL

160-7115 VALVE GP-MANIFOLD

#SEBP25300560

120-6947: VALVE & MTG GP-MAIN CONTROL

VALVE & MTG GP-MAIN CONTROL

120-6947 VALVE & MTG GP-MAIN CONTROL -3-FUNCTION
S/N 3BS1-99999
PART OF 143-5030 HYDRAULIC AR-3 VALVE

i01472934 SEBP2530

1206947 VALVE & MTG GP-MAIN CONTROL Parts scheme

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3J-1907 C	[29]	SEAL-O-RING
2.	3S-2093	[13]	STRAP-CABLE
3.	6V-0852	[7]	CAP-DUST
4.	6V-3965	[7]	FITTING (QUICK DISCONNECT)
5.	6V-8397 C	[18]	SEAL-O-RING
6.	142-3998 Y	[1]	VALVE GP-PILOT (OIL MANIFOLD, 3-FUNCTION)
7.	120-4581 Y	[1]	VALVE GP-MAIN CONTROL (3-FUNCTION)(3 FUNCTION)
8.	160-7115 Y	[1]	VALVE GP-MANIFOLD
9.	147-2765	[1]	HARNESS AS-VALVE
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(EACH KIT-CONNECTING INCLUDES PLUG AS & WEDGE)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
			(EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
10.	136-3344	[1]	PLATE AS
	7T-1099	[2]	LINK
	8T-3490 M	[14]	NUT-WELD (M10X1.5-THD)
	8T-3597 M	[2]	NUT-WELD (M12X1.75-THD)
	8T-3851 M	[1]	BOSS-WELD (M10X1.5X17.5-MM)
11.	125-2835	[1]	PIPE
12.	125-2836	[1]	PIPE
13.	127-5778	[6]	TEE-O-RING PORT
14.	129-8124	[1]	TUBE AS
15.	129-8125	[1]	TUBE AS
16.	129-8126	[1]	TUBE AS
17.	129-8127	[1]	TUBE AS
18.	129-8128	[1]	TUBE AS
19.	200-8436 C	[1]	TUBE AS
20.	133-1135	[1]	TUBE AS
21.	148-9116	[1]	TUBE AS
22.	4J-0522	[2]	SEAL-O-RING
23.	200-5978 C	[2]	STRAINER
24.	6V-8398	[1]	SEAL-O-RING
25.	6V-8636	[9]	CONNECTOR
26.	6V-8724	[6]	ELBOW
27.	6V-9837	[1]	TEE-SWIVEL
28.	6V-9873	[1]	CONNECTOR
30.	8T-4121	[13]	WASHER-HARD (11X21X2.5-MM THK)
31.	8T-4133 M	[2]	NUT (M10X1.5-THD)
32.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
33.	8T-4178 M	[3]	BOLT (M10X1.5X90-MM)
34.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
35.	8T-4223	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
36.	8T-4244 M	[1]	NUT (M12X1.75-THD)
37.	8T-5412 M	[9]	BOLT (M12X1.75X140-MM)
38.	8T-7930 M	[2]	BOLT (M12X1.75X160-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25300561

126-7734: VALVE & MTG GP-MAIN CONTROL

VALVE & MTG GP-MAIN CONTROL

126-7734 VALVE & MTG GP-MAIN CONTROL -3-FUNCTION, WITH RIDE CONTROL
S/N 3BS1-UP
PART OF 159-0037 CONTROL AR-RIDE

i00811986 SEBP2530

1267734 VALVE & MTG GP-MAIN CONTROL Parts scheme

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3J-1907	[31]	SEAL-O-RING
2.	3S-2093	[13]	STRAP-CABLE
3.	6V-0852	[7]	CAP-DUST
4.	6V-3965	[7]	FITTING (QUICK DISCONNECT)
5.	6V-8397	[23]	SEAL-O-RING
6.	130-5300	[1]	CLIP
7.	142-3998 Y	[1]	VALVE GP-PILOT (OIL MANIFOLD, 3-FUNCTION)
8.	120-4581 Y	[1]	VALVE GP-MAIN CONTROL (3-FUNCTION)(LIFT, TILT & AUXILIARY)
9.	160-7116 Y	[1]	VALVE GP-DIVERTER (RIDE CONTROL)
10.	147-2765	[1]	HARNESS AS-VALVE
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
11.	136-3344	[1]	PLATE AS
	7T-1099	[2]	LINK
	8T-3490 M	[11]	NUT-WELD (M10X1.5-THD)
	8T-3597 M	[2]	NUT-WELD (M12X1.75-THD)
	8T-3851 M	[1]	BOSS-WELD (M10X1.5X17.5-MM)
12.	125-2835	[1]	PIPE
13.	125-2836	[1]	PIPE
14.	127-5778	[7]	TEE-O-RING PORT
15.	129-8124	[1]	TUBE AS
16.	129-8125	[1]	TUBE AS
17.	129-8126	[1]	TUBE AS
18.	129-8127	[1]	TUBE AS
19.	129-8128	[1]	TUBE AS
20.	148-9758	[1]	TUBE AS
21.	156-3921	[1]	TUBE AS
22.	130-9468	[1]	TUBE AS
23.	133-1134	[1]	TUBE AS
24.	133-1135	[1]	TUBE AS
25.	148-9116	[1]	TUBE AS
26.	3J-7354	[3]	SEAL-O-RING
27.	4J-0522	[2]	SEAL-O-RING
28.	6K-8178	[1]	CLIP (LOOP)
29.	6V-8398	[1]	SEAL-O-RING
30.	6V-8636	[9]	CONNECTOR
31.	6V-8724	[5]	ELBOW
32.	6V-9005	[2]	ELBOW
33.	6V-9200	[1]	ELBOW
34.	6V-9837	[1]	TEE-SWIVEL
35.	6V-9843	[1]	TEE
36.	6V-9872	[2]	CONNECTOR
37.	6V-9873	[1]	CONNECTOR
38.	7M-8485	[2]	SEAL-O-RING
39.	5P-9297	[1]	CLIP (LOOP)
40.	8T-4121	[16]	WASHER-HARD (11X21X2.5-MM THK)
41.	8T-4133 M	[3]	NUT (M10X1.5-THD)
42.	8T-4136 M	[8]	BOLT (M10X1.5X25-MM)
43.	8T-4178 M	[3]	BOLT (M10X1.5X90-MM)
44.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
45.	8T-4223	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
46.	8T-4244 M	[1]	NUT (M12X1.75-THD)
47.	8T-5412 M	[9]	BOLT (M12X1.75X140-MM)
48.	8T-7930 M	[2]	BOLT (M12X1.75X160-MM)
49.	6V-8781	[1]	TEE
50.	6E-5065	[1]	SCREEN AS
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25300562

130-5463: VALVE & MTG GP-MAIN CONTROL

VALVE & MTG GP-MAIN CONTROL

130-5463 VALVE & MTG GP-MAIN CONTROL -2-FUNCTION, WITH RIDE CONTROL
S/N 3BS1-UP
PART OF 130-5461 CONTROL AR-RIDE

i00773214 SEBP2530

1305463 VALVE & MTG GP-MAIN CONTROL Parts scheme

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3J-1907	[25]	SEAL-O-RING
2.	3S-2093	[13]	STRAP-CABLE
3.	6V-0852	[5]	CAP-DUST
4.	6V-3965	[5]	FITTING (QUICK DISCONNECT)
5.	6V-8397	[19]	SEAL-O-RING
6.	130-5300 C	[1]	CLIP
7.	142-3997 YC	[1]	VALVE GP-PILOT (OIL MANIFOLD, 2-FUNCTION)
8.	120-4577 Y	[1]	VALVE GP-MAIN CONTROL (2-FUNCTION)
9.	160-7116 Y	[1]	VALVE GP-DIVERTER (RIDE CONTROL)
10.	147-2765 C	[1]	HARNESS AS-VALVE
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
	102-8802	[3]	KIT-RECEPTACLE (2-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
11.	136-3344 C	[1]	PLATE AS
	7T-1099	[2]	LINK
	8T-3490 M	[9]	NUT-WELD (M10X1.5-THD)
	8T-3597 M	[2]	NUT-WELD (M12X1.75-THD)
	8T-3851 M	[1]	BOSS-WELD (M10X1.5X17.5-MM)
12.	125-2835	[1]	PIPE
13.	125-2836	[1]	PIPE
14.	127-5778	[5]	TEE-O-RING PORT
15.	129-8124	[1]	TUBE AS
16.	129-8125	[1]	TUBE AS
17.	129-8126	[1]	TUBE AS
18.	129-8127	[1]	TUBE AS
19.	129-8128	[1]	TUBE AS
20.	148-9758 C	[1]	TUBE AS
21.	156-3921	[1]	TUBE AS
22.	130-9468	[1]	TUBE AS
23.	133-1134	[1]	TUBE AS
24.	3J-7354	[3]	SEAL-O-RING
25.	4J-0522	[2]	SEAL-O-RING
26.	6K-8178 C	[1]	CLIP (LOOP)
27.	6V-8398	[1]	SEAL-O-RING
28.	6V-8636	[7]	CONNECTOR
29.	6V-8724 C	[5]	ELBOW
30.	6V-9005	[2]	ELBOW
31.	6V-9200	[1]	ELBOW
32.	6V-9837	[1]	TEE-SWIVEL
33.	6V-9843	[1]	TEE
34.	6V-9872	[2]	CONNECTOR
35.	6V-9873	[1]	CONNECTOR
36.	7M-8485	[2]	SEAL-O-RING
37.	5P-9297 C	[1]	CLIP (LOOP)
38.	8T-4121 C	[16]	WASHER-HARD (11X21X2.5-MM THK)
39.	8T-4133 CM	[3]	NUT (M10X1.5-THD)
40.	8T-4136 CM	[8]	BOLT (M10X1.5X25-MM)
41.	8T-4178 M	[3]	BOLT (M10X1.5X90-MM)
42.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
43.	8T-4223	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
44.	8T-4244 M	[1]	NUT (M12X1.75-THD)
45.	8T-5412 M	[9]	BOLT (M12X1.75X140-MM)
46.	8T-7930 M	[2]	BOLT (M12X1.75X160-MM)
47.	6V-8781	[1]	TEE
48.	6E-5065	[1]	SCREEN AS
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP25300563

118-5095: VALVE GP-CONTROL

VALVE GP-CONTROL

118-5095 VALVE GP-CONTROL -AUXILIARY
S/N 3BS1-99999
PART OF 120-4581 VALVE GP-MAIN CONTROL

i00190881 SEBP2530

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	099-4691 M	[1]	BOLT-LOCKING (M12X1.75X25-MM)
2.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
3.	8J-1898 B	[8]	SHIM (0.01-IN THK)
4.	338-5494	[2]	RETAINER
5.	1U-0471 B	[5]	SHIM (0.25-MM THK)
6.	338-5495	[1]	SPRING (OUTER)
7.	3G-8991	[1]	SPRING (INNER)
8.	1U-0470 B	[2]	SHIM (0.178-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP25300564

160-7116: VALVE GP-DIVERTER

VALVE GP-DIVERTER

160-7116 VALVE GP-DIVERTER -RIDE CONTROL
S/N 3BS1-UP
PART OF 164-2953 VALVE & MTG GP-DIVERTER, 126-7734, 130-5463 VALVE & MTG GP-MAIN CONTROL

i00900847 SEBP2530

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9S-8005	[2]	PLUG (3/4-16-THD)
2.	9S-8006	[2]	PLUG (7/8-14-THD)
3.	3E-8574 Y	[1]	VALVE GP-SOLENOID (RIDE CONTROL)
4.	9S-9334	[2]	PLUG (1 5/16-12-THD)
5.	1S-1642	[1]	SPRING
6.	2M-9780	[2]	SEAL-O-RING
7.	3J-1907	[1]	SEAL-O-RING
8.	3K-0360	[3]	SEAL-O-RING
9.	4J-7533	[5]	SEAL-O-RING
10.	4T-1860 Y	[1]	VALVE GP-SHUTTLE (BALL RESOLVER)
11.	5J-4571	[1]	SPRING
12.	6E-2377 Y	[1]	VALVE GP-RELIEF (RIDE CONTROL)
13.	6T-6052	[1]	PLUG-ORIFICE
14.	7M-8485	[2]	SEAL-O-RING
15.	8T-5879	[1]	ADAPTER
16.	9S-8001	[5]	PLUG
17.	9S-8004	[1]	PLUG (9/16-18-THD)
	Y		SEPARATE ILLUSTRATION

#SEBP25300565

160-7116: VALVE GP-DIVERTER

VALVE GP-DIVERTER

160-7116 VALVE GP-DIVERTER -RIDE CONTROL
S/N 3BS1-99999
PART OF 164-2953 VALVE & MTG GP-DIVERTER

i01352470 SEBP2530

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9S-8005	[2]	PLUG (3/4-16-THD)
2.	9S-8006	[2]	PLUG (7/8-14-THD)
3.	152-8340 CY	[1]	VALVE GP-SOLENOID (24-VOLT)(RIDE CONTROL)
4.	9S-9334	[2]	PLUG (1 5/16-12-THD)
5.	1S-1642	[1]	SPRING
6.	2M-9780	[2]	SEAL-O-RING
7.	3J-1907	[1]	SEAL-O-RING
8.	3K-0360	[3]	SEAL-O-RING
9.	4J-7533	[5]	SEAL-O-RING
10.	4T-1860 Y	[1]	VALVE GP-SHUTTLE (BALL RESOLVER)
11.	5J-4571	[1]	SPRING
12.	6E-2377 Y	[1]	VALVE GP-RELIEF (RIDE CONTROL)
13.	6T-6052	[1]	PLUG-ORIFICE
14.	7M-8485	[2]	SEAL-O-RING
15.	8T-5879	[1]	ADAPTER
16.	9S-8001	[5]	PLUG
17.	9S-8004	[1]	PLUG (9/16-18-THD)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP25300566

180-8585: VALVE GP-DIVERTER

VALVE GP-DIVERTER

180-8585 VALVE GP-DIVERTER -QUICK COUPLER
S/N 3BS1-99999
PART OF 188-0099, 188-1849 LINES GP-COUPLER

i01238547 SEBP2530

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	180-9068	[1]	VALVE GP-SOLENOID (QUICK COUPLER)
2.	180-9069	[1]	VALVE-DIVERTER (QUICK COUPLER)
3.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
4.	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)

#SEBP25300567

154-5713: VALVE GP-LOWERING CONTROL

VALVE GP-LOWERING CONTROL

154-5713 VALVE GP-LOWERING CONTROL -DEAD ENGINE, LIFT ARM LOWER
S/N 3BS1-99999
PART OF 121-3080 HYDRAULIC AR-2 VALVE

i00817039 SEBP2530

1545713 VALVE GP-LOWERING CONTROL Parts scheme

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8W-6648 I	[1]	HOSE AS
2.	100-2785 I	[1]	HOSE AS
3.	112-1817	[1]	VALVE-BALL (LOWERING CONTROL)
4.	122-6177	[1]	PLATE
5.	3J-1907	[2]	SEAL-O-RING
6.	4B-4274	[4]	WASHER (5.5X13X1.2-MM THK)
7.	6V-8397	[4]	SEAL-O-RING
8.	6V-8636	[1]	CONNECTOR
9.	6V-8724	[1]	ELBOW
10.	7Y-3173 M	[4]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
11.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP25300568

120-4577: VALVE GP-MAIN CONTROL

VALVE GP-MAIN CONTROL

120-4577 VALVE GP-MAIN CONTROL -2-FUNCTION
S/N 3BS1-99999
PART OF 112-6998, 130-5463 VALVE & MTG GP-MAIN CONTROL

i00755509 SEBP2530

1204577 VALVE GP-MAIN CONTROL Parts scheme

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1U-0323	[3]	PLUG AS
			(EACH INCLUDES)
	1U-0322	[1]	BUSHING
	3G-2683	[1]	PLUG
2.	1U-0470 B	[4]	SHIM (0.178-MM THK)
3.	1U-0471 B	[10]	SHIM (0.25-MM THK)
4.	1U-1577	[1]	PLUG
5.	1U-1578	[1]	VALVE-CONTROL
6.	3G-8991	[2]	SPRING
8.	4T-4267	[4]	RETAINER
9.	4T-9311	[2]	HOUSING
10.	4T-9312	[2]	HOUSING
11.	6E-2377 Y	[1]	VALVE GP-RELIEF (LINE,TILT CYL HEAD END PORT)
11A.	6E-2377 Y	[1]	VALVE GP-RELIEF (LINE,TILT CYL ROD END PORT)
12.	7C-6467	[3]	PLUG
13.	7J-7423	[3]	VALVE-CONTROL
14.	8J-1898 B	[16]	SHIM (0.01-IN THK)
16.	Z	[1]	STEM-TILT
17.	Z	[1]	STEM-LIFT
18.	Z	[1]	BODY-VALVE
19.	135-5491 Y	[1]	VALVE GP-RELIEF (MAIN)
20.	162-9206	[2]	SPRING
21.	004-1963	[2]	SEAL-O-RING
22.	099-4691 M	[2]	BOLT-LOCKING (M12X1.75X25-MM)
23.	148-8395	[1]	PLUG AS
	3K-0360	[1]	SEAL-O-RING
	9S-8005	[1]	PLUG (3/4-16-THD)
24.	1H-9696	[2]	SEAL-O-RING
25.	1J-8960	[1]	SPRING
26.	2S-4078	[3]	SEAL-O-RING
27.	3G-4117	[1]	COVER
28.	4J-0522	[1]	SEAL-O-RING
29.	6K-6307	[1]	SEAL-O-RING
30.	7S-8491	[3]	SPRING
31.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
32.	8T-4182 M	[4]	BOLT (M10X1.5X45-MM)
33.	8T-4192 M	[2]	BOLT (M12X1.75X25-MM)
34.	8T-4198 M	[4]	BOLT (M10X1.5X100-MM)
35.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION
	Z		NOT SERVICED SEPARATELY

#SEBP25300569

120-4581: VALVE GP-MAIN CONTROL

VALVE GP-MAIN CONTROL

120-4581 VALVE GP-MAIN CONTROL -3-FUNCTION
S/N 3BS1-UP
PART OF 120-6947, 126-7734 VALVE & MTG GP-MAIN CONTROL

i00755510 SEBP2530

1204581 VALVE GP-MAIN CONTROL Parts scheme

For full view, you need register

Parts for your 962G WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4T-4267	[4]	RETAINER
2.	162-9206	[2]	SPRING
3.	099-4691 M	[2]	BOLT-LOCKING (M12X1.75X25-MM)
4.	4T-9311	[3]	HOUSING
5.	4J-0522	[2]	SEAL-O-RING
6.	118-5095 Y	[1]	VALVE GP-CONTROL (AUXILIARY)(AUXILIARY)
7.	1H-9696	[3]	SEAL-O-RING
8.	4J-0523	[1]	SEAL-O-RING
9.	3G-4135	[1]	PLUG
10.	7M-8485	[1]	SEAL-O-RING
11.	6E-2377 Y	[1]	VALVE GP-RELIEF (LINE,TILT CYL HEAD END PORT)
12.	9S-8005	[1]	PLUG (3/4-16-THD)
13.	3K-0360	[1]	SEAL-O-RING
14.	7X-2551 M	[5]	BOLT (M12X1.75X200-MM)
15.	8T-4198 M	[6]	BOLT (M10X1.5X100-MM)
16.	9S-4182	[1]	PLUG (7/16-20-THD)
17.	3J-7354	[1]	SEAL-O-RING
18.	1U-0323	[4]	PLUG AS
			(EACH INCLUDES)
	1U-0322	[1]	BUSHING
	3G-2683	[1]	PLUG
19.	2S-4078	[4]	SEAL-O-RING
20.	7J-7423	[4]	VALVE-CONTROL
21.	7S-8491	[4]	SPRING
22.	8T-4121	[12]	WASHER-HARD (11X21X2.5-MM THK)
23.	135-5491 Y	[1]	VALVE GP-RELIEF (MAIN)
24.	4T-4162 Y	[1]	VALVE GP-RELIEF (LINE,AUX CYL ROD END PORT)
25.	4T-2742 Y	[1]	VALVE GP-RELIEF (LINE,AUX CYL HEAD END PORT)
26.	004-1963	[3]	SEAL-O-RING
27.	8T-4182 M	[6]	BOLT (M10X1.5X45-MM)
28.	4T-9312	[3]	HOUSING
29.	1U-1577	[1]	PLUG
30.	6K-6307	[1]	SEAL-O-RING
31.	1J-8960	[1]	SPRING
32.	1U-1578	[1]	VALVE-CONTROL
33.	3G-8991	[2]	SPRING
34.	1U-0470 B	[4]	SHIM (0.178-MM THK)
35.	1U-0471 B	[10]	SHIM (0.25-MM THK)
36.	8T-4223	[7]	WASHER-HARD (13.5X25.5X3-MM THK)
37.	8J-1898 B	[16]	SHIM (0.01-IN THK)
38.	6E-2377 Y	[1]	VALVE GP-RELIEF (LINE,TILT CYL ROD END PORT)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

VALVE GP-CONTROL

Specifications

Relief Valve (Line)
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Hydraulic System

Main Control Valve
950G Wheel Loader, 962G
Wheel Loader and IT62G
Integrated Toolcarrier Hydraulic System

Tool Operating Manual

Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}
Using the 173-1530 Injector Seating Tool Group on 3114, 3116, and 3126 MUI or 3116 and 3126 HEUI 2-Valve Engines{1290}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Systems Operation

Main Control Valve
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System

Testing and Adjusting

Diverter Valve (Ride Control) - Isolation and Drift Check
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

Pilot Control Valve Chamber Pressure - Check
950G Wheel Loader and 962G
Wheel Loader Electrohydraulic System

Disassembly and Assembly

Main Control Valve - Disassemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems

Main Control Valve - Assemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems

Main Control Valve and Mounting Plate - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems

Main Control Valve and Mounting Plate - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems

Main Control Valve and Mounting Plate - Remove
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems

Main Control Valve and Mounting Plate - Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems

Service Magazine

A New Filter Screen May be Installed in the Dead Engine Lower System and the Implement Pilot System {5051}
2003/02/24

The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28

Correction to Specifications , "Main Control Valve" {5051}
2006/09/11

Caterpillar Parts SIS Catalog 962G :

120-6947 VALVE & MTG GP-MAIN CONTROL

112-6998 VALVE & MTG GP-MAIN CONTROL

164-2953 VALVE & MTG GP-DIVERTER

129-1243 TANK GP-HYDRAULIC

143-5438 PUMP GP-VANE

167-0995 PUMP GP-PISTON & VANE

126-7734 VALVE & MTG GP-MAIN CONTROL

130-5463 VALVE & MTG GP-MAIN CONTROL

118-5095 VALVE GP-CONTROL

160-7116 VALVE GP-DIVERTER

180-8585 VALVE GP-DIVERTER

154-5713 VALVE GP-LOWERING CONTROL

120-4577 VALVE GP-MAIN CONTROL

Truck sale:

Caterpillar 962G
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI

59.000

Caterpillar 962G, Wielladers, Bouw

QUINN COMPANY

Caterpillar 962G2, Wheel Loaders, Construction

CGT - COMPAGNIA GENERALE TRATTORI

Caterpillar 962G2, Wheel Loaders, Construction
- Wheel loaders
CGT - COMPAGNIA GENERALE TRATTORI

96.768

Caterpillar 962G, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
FINNING CANADA