AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

105-7238 CYLINDER GP-BUCKET S/N 2WM500-UP 80MM (3.14IN) BORE X 742MM (29.21IN) STROKE PART OF 102-0794 CYLINDER & SEAL GP-BUCKET AN ATTACHMENT 307


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP
HYDRAULIC GP

EXCAVATOR 307 EXCAVATOR 2WM
 307 Excavator 2WM00500-UP (MACHINE) POWERED BY 3054 Engine SEBP2531 307 2WM   (1992)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BLADE
114-8378 CYLINDER GP-BLADE
CYLINDER GP-BOOM
103-8195 CYLINDER GP-BOOM
CYLINDER GP-BUCKET
105-7238 CYLINDER GP-BUCKET
CYLINDER GP-OFFSET
123-9937 CYLINDER GP-OFFSET
CYLINDER GP-STICK
103-8320 CYLINDER GP-STICK
CYLINDER GP-STICK
125-1494 CYLINDER GP-STICK
 

#SEBP25310190
 

105-7238: CYLINDER GP-BUCKET

105-7238 CYLINDER GP-BUCKET
S/N 2WM500-UP
80MM (3.14IN) BORE X 742MM (29.21IN) STROKE
PART OF 102-0794 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i00482417 SEBP2531
1057238 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-7239 [1] CYLINDER AS  
2. 105-7242 [1] BEARING-SLEEVE  
3. 099-7002 J [1] RING  
4. 116-3392 J [1] SEAL-LIP TYPE  
5. 105-7252 J [1] RING  
6. 105-7251 [1] PISTON  
7. 099-7001 [1] RING-RETAINING  
8. 095-1710 J [1] SEAL-O-RING  
9. 099-7000 J [1] RING-BACKUP  
10. 114-0752 [1] BEARING-SLEEVE  
11. 099-6997 J [1] SEAL-BUFFER  
12. 099-7008 [1] RING  
13. 099-6996 J [1] SEAL-U-CUP  
14. 099-6999 J [1] RING-BACKUP  
15. 8T-3338 J [1] SEAL-O-RING (84.4MM ID)  
16. 099-7009 [1] HEAD  
17. 105-7246 [1] ROD AS  
18. 103-8324 [1] BEARING-SLEEVE  
19. 099-6998 J [1] SEAL AS  
20. 103-8331 M [1] LOCKNUT (M42X46 THD)  
   
    AVAILABLE REPAIR KIT(S):
  105-7253 J [1] KIT-SEAL  
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  M   METRIC PART
 

#SEBP25310191
 

123-9937: CYLINDER GP-OFFSET

123-9937 CYLINDER GP-OFFSET
S/N 2WM500-UP
100MM (3.94 IN) BORE X 395MM (15.55 IN) STROKE
PART OF 123-9936 CYLINDER & SEAL GP-OFFSET
AN ATTACHMENT
i00516108 SEBP2531
1239937 CYLINDER GP-OFFSET Parts scheme
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-9938 [1] CYLINDER AS  
2. 103-8324 [1] BEARING-SLEEVE  
3. 123-9940 [1] ROD AS  
4. 103-8324 [1] BEARING-SLEEVE  
5. 125-1830 M [1] LOCKNUT-INSERT (M42X2X46MM)  
6. 099-0600 [1] RING  
7. 6V-8467 J [1] SEAL-O-RING  
8. 105-7388 J [1] RING  
9. 105-7478 [1] PISTON  
10. 5I-5928 J [1] SEAL AS  
11. 093-1605 J [1] RING  
12. 095-1625 J [1] SEAL-O-RING  
13. 099-0699 J [1] RING-BACKUP  
14. 099-7001 [1] RING-RETAINING  
15. 114-0752 [1] BEARING-SLEEVE  
16. 099-6997 J [1] SEAL-BUFFER  
17. 099-6996 J [1] SEAL-U-CUP  
18. 099-6999 J [1] RING-BACKUP  
19. 105-7479 [1] HEAD  
20. 116-3392 J [1] SEAL-LIP TYPE  
   
    AVAILABLE REPAIR KIT(S):
  105-7480 J [1] KIT-SEAL  
  J   KIT MARKED J INCLUDES PARTS MARKED J
  M   METRIC PART
 

#SEBP25310192
 

103-8320: CYLINDER GP-STICK

103-8320 CYLINDER GP-STICK
S/N 2WM500-UP
90MM (3.54 IN.) BORE X 932MM (36.69 IN.) STROKE
PART OF 102-0793 CYLINDER & SEAL GP-STICK
AN ATTACHMENT
i00471041 SEBP2531
1038320 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 103-8321 [1] CYLINDER AS  
2. 103-8324 [1] BEARING-SLEEVE  
3. 103-8328 [1] RING-RETAINING  
4. 114-0617 [1] STOP  
5. 125-1830 M [1] LOCKNUT-INSERT (M42X2 THD)  
6. 099-6982 [1] RING  
7. 095-1671 J [1] SEAL-O-RING  
8. 105-2630 J [1] RING  
9. 103-8332 [1] PISTON  
10. 105-7265 J [1] RING-SEAL  
11. 102-0914 [1] STOP  
12. 095-1624 J [2] SEAL-O-RING  
13. 099-6974 J [3] RING-BACKUP  
14. 099-6975 [1] RING-RETAINING  
15. 114-0751 [1] BEARING-SLEEVE  
16. 093-1481 J [1] SEAL-BUFFER  
17. 093-1475 J [1] SEAL-U-CUP  
18. 093-1518 J [1] RING-BACKUP  
19. 085-7990 [1] HEAD  
20. 116-3391 J [1] SEAL-LIP TYPE  
21. 103-8336 [1] ROD AS  
22. 103-8324 [1] BEARING-SLEEVE  
23. 099-6973 J [1] SEAL AS  
24. 099-6976 J [1] RING  
25. 095-0924 [2] RING-RETAINING  
26. 103-8329 [1] RING  
   
    AVAILABLE REPAIR KIT(S):
  103-8333 J [1] KIT-SEAL  
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP25310193
 

125-1494: CYLINDER GP-STICK

125-1494 CYLINDER GP-STICK
S/N 2WM500-UP
90 MM (3.56IN) BORE X 846 MM (33.31 IN) STROKE
PART OF 125-1493 CYLINDER & SEAL GP-STICK
AN ATTACHMENT
i00520566 SEBP2531
1251494 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-1495 [1] CYLINDER AS  
2. 103-8324 [1] BEARING-SLEEVE  
3. 103-8328 [1] RING-RETAINING  
4. 114-0617 [1] STOP  
5. 125-1830 M [1] LOCKNUT-INSERT (M42X2X46MM)  
6. 099-6982 [1] RING  
7. 095-1671 J [1] SEAL-O-RING  
8. 105-2630 J [1] RING  
9. 103-8332 [1] PISTON  
10. 105-7265 J [1] RING-SEAL  
11. 102-0914 [1] STOP  
12. 095-1624 J [2] SEAL-O-RING  
13. 099-6974 J [3] RING-BACKUP  
14. 099-6975 [1] RING-RETAINING  
15. 114-0751 [1] BEARING-SLEEVE  
16. 093-1481 J [1] SEAL-BUFFER  
17. 093-1475 J [1] SEAL-U-CUP  
18. 093-1518 J [1] RING-BACKUP  
19. 085-7990 [1] HEAD  
20. 116-3391 J [1] SEAL-LIP TYPE  
21. 105-7442 [1] ROD AS  
22. 103-8324 [1] BEARING-SLEEVE  
23. 099-6973 J [1] SEAL AS  
24. 099-6976 J [1] RING  
25. 095-0924 [2] RING-RETAINING  
26. 103-8329 [1] RING  
   
    AVAILABLE REPAIR KIT(S):
  103-8333 J [1] KIT-SEAL  
  J   KIT MARKED J INCLUDES PARTS MARKED J
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP25310194
 

102-6378: DRIVE GP-SWING

102-6378 DRIVE GP-SWING
S/N 2WM500-UP
PART OF 113-6902 POWER TRAIN AR
i00466566 SEBP2531
1026378 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-6421 [1] GAUGE-OIL LEVEL (DIPSTICK)  
2. 102-6423 [1] PIPE  
3. 102-6422 [1] PIPE AS  
4. 102-6426 [1] BREATHER AS  
  102-6427 [1] PIPE AS  
5. 114-1318 Y [1] DRIVE GP-SWING  
6. 5I-4643 [1] PLUG  
7. 2B-0858 [1] PLUG-PIPE  
8. 3B-6496 [1] ELBOW  
9. 102-6497 [1] NIPPLE-PIPE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25310195
 

114-1318: DRIVE GP-SWING

114-1318 DRIVE GP-SWING
S/N 2WM500-735
PART OF 102-6378 DRIVE GP-SWING
i00482915 SEBP2531
1141318 DRIVE GP-SWING Parts scheme 1141318 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-9287 [1] SHAFT-PINION  
2. 5I-9288 [1] CAGE  
3. 095-1563 [1] SEAL-O-RING  
4. 5I-9289 [1] BEARING AS  
5. 5I-9290 [1] HOUSING  
6. 5I-9291 [1] SEAL-LIP TYPE  
7. 5I-9292 [1] BEARING AS  
8. 5I-9293 [2] SPACER  
9. 5I-9294 [2] PIN  
10. 5I-9295 [1] GEAR-SUN (17-TEETH)  
11. 5I-9296 [1] GEAR-RING (58-TEETH)  
12. 5I-9297 [1] GEAR-SUN (15-TEETH)  
13. 5I-9298 [1] RING  
14. 5I-9299 [1] SEAL-LIP TYPE  
15. 5I-9300 [1] BEARING-ROLLER  
16. 095-0968 [2] PLUG  
17. 7I-2791 [1] HOUSING  
18. 5I-9302 [1] PLATE  
19. 5I-9303 [1] PLATE  
20. 5I-9304 [1] SPRING  
21. 5F-3106 [1] SEAL-O-RING  
22. 2H-3935 [2] SEAL-O-RING  
23. 114-0606 [1] PLATE  
24. 5I-9308 [4] BUSHING  
25. 5I-9309 [4] RING  
26. 099-0371 [2] PLUG  
27. 095-1579 [2] SEAL-O-RING  
28. 5I-9310 [4] PLATE  
29. 5I-9311 [1] RING  
30. 5I-9312 [1] BEARING  
31. 114-0607 [2] PISTON  
32. 114-0611 [2] RING  
33. 116-3410 [1] COVER  
34. 5I-9315 [16] SPRING  
35. 5I-9316 [1] PISTON-BRAKE  
36. 5I-9317 [1] PLATE  
37. 5I-9318 [1] PLATE-FRICTION  
38. 5I-9320 [1] BARREL AS  
39. 110-7182 [1] PISTON AS  
40. 095-0966 [1] PLUG  
41. 095-9232 M [6] BOLT-SOCKET HEAD (M12X1.75X95-MM)  
42. 5I-9322 [1] CARRIER AS  
43. 5I-9329 [1] CARRIER AS  
  5I-9323 [3] GEAR-PLANETARY  
  5I-9324 [3] BUSHING  
  5I-9325 [3] WASHER  
  5I-9326 [3] SHAFT-PLANETARY  
  5I-9328 [1] CARRIER-PLANETARY  
  099-8111 [3] PIN-SPRING  
44. 096-5932 [2] PLUG  
45. 096-5934 [2] SPRING  
46. 096-5933 [2] VALVE-CHECK (MAKEUP)  
47. 095-1587 [2] SEAL-O-RING  
48. 095-1786 [2] RING-BACKUP  
49. 5I-9331 [2] VALVE AS  
50. 099-0329 [1] PIN  
51. 095-1789 [4] RING  
52. 095-1594 [4] SEAL-O-RING  
53. 116-3409 [2] VALVE GP-RELIEF  
    (EACH INCLUDES)
  095-1594 [1] SEAL-O-RING  
  095-1789 [1] RING  
54. 8T-3957 M [4] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
55. 9S-4191 [1] PLUG  
56. 3J-1907 [1] SEAL-O-RING  
57. 2D-6392 [3] SEAL-O-RING  
58. 7I-2883 [1] VALVE AS  
  M   METRIC PART
 

#SEBP25310196
 

114-1318: DRIVE GP-SWING

114-1318 DRIVE GP-SWING
S/N 2WM736-UP
PART OF 102-6378 DRIVE GP-SWING
i00675344 SEBP2531
1141318 DRIVE GP-SWING Parts scheme 1141318 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-9287 [1] SHAFT-PINION  
2. 5I-9288 [1] CAGE  
3. 095-1563 [1] SEAL-O-RING  
4. 5I-9289 [1] BEARING AS  
5. 5I-9290 [1] HOUSING  
6. 5I-9291 [1] SEAL-LIP TYPE  
7. 5I-9292 [1] BEARING AS  
8. 5I-9293 [2] SPACER  
9. 5I-9294 [2] PIN  
10. 5I-9295 [1] GEAR-SUN (17-TEETH)  
11. 5I-9296 [1] GEAR-RING (58-TEETH)  
12. 5I-9297 [1] GEAR-SUN (15-TEETH)  
13. 5I-9298 [1] RING  
14. 5I-9299 [1] SEAL-LIP TYPE  
15. 5I-9300 [1] BEARING-ROLLER  
16. 095-0968 [2] PLUG  
17. 7I-2791 [1] HOUSING  
18. 5I-9302 [1] PLATE  
19. 5I-9303 [1] PLATE  
20. 5I-9304 [1] SPRING  
21. 5F-3106 [1] SEAL-O-RING  
22. 2H-3935 [2] SEAL-O-RING  
23. 114-0606 [1] PLATE  
24. 5I-9308 [4] BUSHING  
25. 5I-9309 [4] RING  
26. 099-0371 [2] PLUG  
27. 095-1579 [2] SEAL-O-RING  
28. 5I-9310 [4] PLATE  
29. 5I-9311 [1] RING  
30. 5I-9312 [1] BEARING  
31. 114-0607 [2] PISTON  
32. 114-0611 [2] RING  
33. 116-3410 [1] COVER  
34. 5I-9315 [16] SPRING  
35. 5I-9316 [1] PISTON-BRAKE  
36. 5I-9317 [1] PLATE  
37. 5I-9318 [1] PLATE-FRICTION  
38. 5I-9320 [1] BARREL AS  
39. 110-7182 [1] PISTON AS  
40. 095-0966 [1] PLUG  
41. 095-9232 M [6] BOLT-SOCKET HEAD (M12X1.75X95-MM)  
42. 5I-9322 [1] CARRIER AS  
43. 5I-9329 [1] CARRIER AS  
  5I-9323 [3] GEAR-PLANETARY  
  5I-9324 [3] BUSHING  
  5I-9325 [3] WASHER  
  5I-9326 [3] SHAFT-PLANETARY  
  5I-9328 [1] CARRIER-PLANETARY  
  099-8111 [3] PIN-SPRING  
44. 096-5932 [2] PLUG  
45. 096-5934 [2] SPRING  
46. 096-5933 [2] VALVE-CHECK (MAKEUP)  
47. 095-1587 [2] SEAL-O-RING  
48. 095-1786 [2] RING-BACKUP  
49. 5I-9331 [2] VALVE AS  
50. 099-0329 [1] PIN  
51. 095-1789 [4] RING  
52. 095-1594 [4] SEAL-O-RING  
53. 137-9279 C [2] VALVE GP-RELIEF  
    (EACH INCLUDES)
  095-1594 [1] SEAL-O-RING  
54. 8T-3957 M [4] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
55. 9S-4191 [1] PLUG  
56. 3J-1907 [1] SEAL-O-RING  
57. 2D-6392 [3] SEAL-O-RING  
58. 7I-2883 [1] VALVE AS  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP25310197
 

102-6408: FASTENER GP-SWING & FINAL DR

102-6408 FASTENER GP-SWING & FINAL DR
S/N 2WM500-UP
FOR FINAL & SWING DRIVES
PART OF 113-6902 POWER TRAIN AR
i00466569 SEBP2531
1026408 FASTENER GP-SWING & FINAL DR Parts scheme
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7338 M [42] BOLT (M16X2X45-MM)  
2. 9X-8257 [24] WASHER (17.5X30X3.5-MM THK)  
3. 085-9309 [6] SPACER (16.6X32X8.5-MM THK)  
4. 7X-0515 [12] WASHER-HARD (17X35X5-MM THK)  
5. 093-0476 [2] DOWEL  
6. 093-0537 [4] PLUG  
7. 095-9360 [2] CORK  
8. 1U-8846 [15] SEALANT-GASKET  
  M   METRIC PART
 

#SEBP25310198
 

4I-6078: FILTER GP-OIL

4I-6078 FILTER GP-OIL
S/N 2WM500-UP
PART OF 129-2940 LINES GP-PILOT
i00369092 SEBP2531
4I6078 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8670 [1] FILTER-OIL (ADVANCED EFFICIENCY)  
 

#SEBP25310199
 

122-3334: HYDRAULIC AR

122-3334 HYDRAULIC AR
S/N 2WM500-UP
PART OF 122-3333 GENERAL AR
i00519471 SEBP2531
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  114-8375 Y [1] CYLINDER & SEAL GP-BLADE (RH)  
  114-8376 Y [1] CYLINDER & SEAL GP-BLADE (LH)  
  113-7680 Y [1] LINES GP-BLADE CYLINDER  
  113-7671 Y [1] LINES GP-FRONT  
  129-2805 Y [1] LINES GP-PILOT  
  129-2940 Y [1] LINES GP-PILOT  
  113-7670 Y [1] LINES GP-PUMP  
  116-0781 Y [1] LINES GP-RETURN  
  102-1176 Y [1] LINES GP-SWING MOTOR  
  113-7668 Y [1] LINES GP-TRAVEL MOTOR  
  102-0927 Y [1] MOUNTING GP-VALVE  
  113-7675 Y [1] PUMP & MTG GP-MAIN HYDRAULIC  
  130-7432 Y [1] TANK & MTG GP-HYDRAULIC  
  102-0836 Y [1] VALVE GP-MAIN CONTROL  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Hydraulic Bucket Cylinders<BR> 105-7238
307 EXCAVATOR ATTACHMENTS
Hydraulic Stick Cylinders<BR> 125-1494 [846 mm (33.31 in) Stroke] Parallel Offset Boom (2PM257-Up) 105-7437 [900 mm (35.43 in) Stroke] Parallel Offset Boom 103-8320 [932 mm (36.69 in) Stroke] Standard Attachment
307 EXCAVATOR ATTACHMENTS
Hydraulic Boom Cylinders
307 EXCAVATOR ATTACHMENTS
Hydraulic Blade Cylinders<BR> 114-8377 - Right Side, 114-8378 - Left Side
307 EXCAVATOR ATTACHMENTS
Boom Cylinder Lines Group<BR> 102-1182
307 EXCAVATOR ATTACHMENTS
Blade Cylinder Lines Group
307 EXCAVATOR ATTACHMENTS
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Blade Cylinders
307 EXCAVATOR MACHINE SYSTEMS
Bucket Cylinder
307 EXCAVATOR MACHINE SYSTEMS
Stick Cylinder
307 EXCAVATOR MACHINE SYSTEMS
Offset Boom Cylinder &amp; Bar Assembly
307 EXCAVATOR MACHINE SYSTEMS
Boom Cylinder
307 EXCAVATOR MACHINE SYSTEMS
Hydraulic Track Adjusters
307 EXCAVATOR MACHINE SYSTEMS
Service Magazine
Tightening Torques For Locknut On Boom, Stick, Bucket, And Off-Set Cylinders Are Increased {5456,5457,5458,5463}
1996/01/29
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Procedure for the Removal of Air From Hydraulic Cylinders {7562}
2003/01/06
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 307 :

CYLINDER GP-BOOM
103-8195 CYLINDER GP-BOOM
CYLINDER GP-BLADE
114-8378 CYLINDER GP-BLADE
CYLINDER GP-BLADE
114-8377 CYLINDER GP-BLADE
CYLINDER & SEAL GP-STICK
125-1493 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
102-0793 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-OFFSET
123-9936 CYLINDER & SEAL GP-OFFSET
CYLINDER & SEAL GP-BUCKET
102-0794 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BOOM
102-0792 CYLINDER & SEAL GP-BOOM
CYLINDER GP-OFFSET
123-9937 CYLINDER GP-OFFSET
CYLINDER GP-STICK
103-8320 CYLINDER GP-STICK
CYLINDER GP-STICK
125-1494 CYLINDER GP-STICK
DRIVE GP-SWING
102-6378 DRIVE GP-SWING
DRIVE GP-SWING
114-1318 DRIVE GP-SWING
DRIVE GP-SWING
114-1318 DRIVE GP-SWING
FASTENER GP-SWING & FINAL DR
102-6408 FASTENER GP-SWING & FINAL DR
FILTER GP-OIL
4I-6078 FILTER GP-OIL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.