FUEL SYSTEM
CONTROL GP-GOVERNORDRAIN GP-FUEL
GOVERNOR GP
DRIVE GP-TACHOMETER
PUMP GP-FUEL INJECTION
FUEL SYSTEM
CONTROL GP-GOVERNOR
#SEBP25320390
4N-4601: CONTROL GP-GOVERNOR
4N-4601 CONTROL GP-GOVERNOR
S/N 9NR1-UP
POSITIVE LOCK
FOR USE WITH SLEEVE METERING FUEL SYSTEM
AN ATTACHMENT
S/N 9NR1-UP
POSITIVE LOCK
FOR USE WITH SLEEVE METERING FUEL SYSTEM
AN ATTACHMENT
For full view, you need register
Parts for your 3306B GEN SET ENGINE:
CATERPILLAR SIS#SEBP25320391
4W-9186: CONTROL GP-GOVERNOR
For full view, you need register
Parts for your 3306B GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4N-3828 Y | [1] | CONTROL GP-GOVERNOR | |
| 2. | 6N-0768 | [2] | SCREW-MACHINE | |
| 3. | 6N-0254 | [1] | SPACER | |
| 4. | 8N-0816 | [1] | BRACKET | |
| 5. | 8L-9315 | [1] | ROD | |
| 6. | 4S-4455 | [1] | CLIP | |
| 7. | 9M-1311 | [2] | NUT-JAM (1/4-28-THD) | |
| 8. | 5S-7379 | [1] | BOLT (3/8-16X0.875-IN) | |
| 6V-8801 | [1] | NUT (3/8-16-THD) | ||
| 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 9. | 6L-7751 | [2] | ROD END | |
| 10. | 4W-9185 | [1] | PLATE AS | |
| 11. | 7X-2501 | [2] | BOLT (1/4-20X1.25-IN) | |
| 12. | 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 13. | 1H-8289 | [4] | SCREW-MACHINE | |
| 3K-9089 | [4] | NUT-SELF LOCKING (5-40-THD) | ||
| 14. | 9F-6580 | [2] | BOLT (1/4-20X1.125-IN) | |
| 2D-6235 | [2] | LOCKNUT (1/4-20-THD) | ||
| 15. | 8N-0076 | [1] | LEVER-GOVERNOR | |
| 16. | 4W-7773 | [1] | MOTOR AS (GOVERNOR CONTROL) | |
| 7G-8802 | [1] | MOTOR-GEAR | ||
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-9738 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25320392
8N-2177: CONTROL GP-GOVERNOR
8N-2177 CONTROL GP-GOVERNOR
S/N 9NR1-UP
FOR USE WITH THREE HOLE GOVERNOR CONTROL LEVER
AN ATTACHMENT
S/N 9NR1-UP
FOR USE WITH THREE HOLE GOVERNOR CONTROL LEVER
AN ATTACHMENT
For full view, you need register
Parts for your 3306B GEN SET ENGINE:
CATERPILLAR SIS#SEBP25320393
2W-1972: DRAIN GP-FUEL
2W-1972 DRAIN GP-FUEL
S/N 9NR1-UP
LINES & ALARM SWITCH
FOR USE WITH @@@@@ 2W-2382@@@@@
AN ATTACHMENT
S/N 9NR1-UP
LINES & ALARM SWITCH
FOR USE WITH @@@@@ 2W-2382@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 3306B GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2W-1977 | [1] | TUBE AS | |
| 2. | 2W-1978 | [1] | TUBE AS | |
| 3. | 5K-9243 | [1] | ELBOW-FLARED | |
| 4. | 4M-5317 | [1] | BUSHING-REDUCER | |
| 5. | 2N-9768 C | [1] | SWITCH-LIQUID LEVEL (FUEL) | |
| 6. | 4F-7957 | [2] | BOLT (1/4-20X0.875-IN) | |
| 7. | 5P-0537 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 8. | 8B-1931 | [1] | BUSHING-REDUCER | |
| 9. | 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | |
| 10. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 11. | 9L-8492 | [1] | PLUG | |
| 12. | 9L-8496 | [1] | TEE-INVERTED FLARED | |
| 13. | 1F-5842 | [1] | BOLT (5/16-18X3.25-IN) | |
| 14. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 15. | 2B-2404 | [1] | CLIP | |
| 16. | 5D-1753 | [1] | WASHER | |
| 17. | 3P-9200 | [2] | CLIP | |
| 18. | 2W-1974 | [1] | BRACKET AS-MOUNTING | |
| 19. | 1F-2280 | [1] | SPACER (0.438X0.75X2.438-IN THK) | |
| 20. | 9F-6445 | [2] | NUT-WELD (1/4-20-THD) | |
| 21. | 6L-3616 | [1] | CONNECTOR | |
| 22. | 5S-7560 | [1] | SPACER | |
| 23. | 4B-3388 | [1] | BOLT (5/16-18X1.125-IN) | |
| 24. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP25320394
8N-3221: DRIVE GP-GOVERNOR
8N-3221 DRIVE GP-GOVERNOR
S/N 9NR1-UP
PART OF 2W-3368, 7C-5220, 7C-5222, 7C-5226 PUMP GP-GOV & FUEL INJ
AN ATTACHMENT
S/N 9NR1-UP
PART OF 2W-3368, 7C-5220, 7C-5222, 7C-5226 PUMP GP-GOV & FUEL INJ
AN ATTACHMENT
For full view, you need register
Parts for your 3306B GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1N-9882 | [1] | BOLT-LOCKING | |
| 8M-6701 | [1] | WASHER (0.281X0.5X0.032-IN THK) | ||
| 2. | 8N-3233 | [1] | LEVER-GOVERNOR | |
| 3. | 8N-3234 | [1] | SHAFT-SHUTOFF | |
| 4. | 8N-3235 | [1] | LEVER-SHUTOFF | |
| 5. | 7L-4984 | [1] | STUD-TAPERLOCK (5/16-18X3.5-IN) | |
| 6. | 3B-6424 | [1] | LEVER-CONTROL ROD | |
| 5H-2532 | [1] | KEY-WOODRUFF | ||
| 7. | 2A-4996 | [1] | BOLT (3/8-24X1.375-IN) | |
| 2L-6267 | [1] | LOCKNUT (3/8-24-THD) | ||
| 8. | 8N-3232 | [1] | SHAFT-GOVERNOR | |
| 9. | 6N-2016 | [1] | SPRING-SHAFT | |
| 10. | 4W-4564 | [1] | SLEEVE-SHAFT | |
| 11. | 7N-1599 | [1] | PLATE-RETAINING | |
| 12. | 4W-8653 C | [1] | COVER | |
| 13. | 8N-3224 Y | [1] | HOUSING AS-GOVERNOR DRIVE | |
| 14. | 7W-3349 C | [1] | LOCKNUT | |
| 15. | 5P-5034 | [1] | BOLT-SOCKET HEAD (1/4-20X4.75-IN) | |
| 16. | 4W-8795 CM | [1] | SETSCREW-SOCKET | |
| 17. | 8H-0708 | [1] | BOLT (1/4-20X0.5-IN) | |
| 18. | 3L-5987 | [1] | COVER | |
| 6L-1597 | [1] | GASKET | ||
| 19. | 8S-4711 | [3] | BOLT (1/4-20X4.5-IN) | |
| 20. | 5M-6214 | [1] | PLUG (1/8-27 PTF) | |
| 21. | 5P-5034 | [1] | BOLT-SOCKET HEAD (1/4-20X4.75-IN) | |
| 22. | 4D-0514 | [1] | PLUG-PIPE | |
| 23. | 4N-2955 | [4] | BOLT-SELF-LOCKING (1/4-20X0.875-IN) | |
| 24. | 8N-3229 | [1] | GEAR AS-DRIVE (22 & 56 TEETH) | |
| 3L-3324 | [1] | PIN | ||
| 25. | 8N-3238 | [1] | GEAR (16-TEETH) | |
| 26. | 0S-1614 | [4] | BOLT (1/4-20X0.5-IN) | |
| 27. | 5P-0537 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 28. | 6V-5029 | [1] | SEAL-LIP TYPE | |
| 29. | 3K-6983 | [2] | WASHER-RETAINING (0.38X0.50X0.05-IN) | |
| 30. | 2H-3429 | [1] | RING-RETAINING | |
| 31. | 8N-3226 | [1] | GEAR AS-DRIVE (22 TEETH) | |
| 32. | 6F-7027 | [2] | BOLT (1/4-28X0.5-IN) | |
| 33. | 8N-3239 | [1] | GASKET | |
| 34. | 8H-9186 | [1] | SPRING | |
| 35. | 8N-3236 | [1] | SUPPORT AS-RACK | |
| 36. | 8S-6814 | [1] | PIN | |
| 37. | 5H-5744 | [1] | BUSHING-TERMINAL | |
| 38. | 2N-5920 | [1] | EXTENSION-RACK | |
| 39. | 0S-1616 C | [2] | BOLT (1/4-20X1-IN) | |
| 40. | 8L-5855 | [1] | COUPLING-GOVERNOR DRIVE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25320395
1W-8235: DRIVE GP-TACHOMETER
For full view, you need register
#SEBP25320396
1W-9010: DRIVE GP-TACHOMETER
For full view, you need register
#SEBP25320397
4W-0313: DRIVE GP-TACHOMETER
For full view, you need register
Parts for your 3306B GEN SET ENGINE:
CATERPILLAR SIS#SEBP25320398
7C-8993: FASTENER GP-FUEL INJ PUMP
7C-8993 FASTENER GP-FUEL INJ PUMP
S/N 9NR1-UP
PART OF 131-0189, 131-3534, 149-9851, 7C-9201, 7W-9365, 7W-9823 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
S/N 9NR1-UP
PART OF 131-0189, 131-3534, 149-9851, 7C-9201, 7W-9365, 7W-9823 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 3306B GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8B-2377 | [4] | BOLT (1/4-20X2-IN) | |
| 2. | 4N-1761 | [4] | BOLT (1/4-20X6.5-IN) | |
| 3. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
| 4. | 0S-1614 | [3] | BOLT (1/4-20X0.5-IN) | |
| 5. | 4F-7957 C | [8] | BOLT (1/4-20X0.875-IN) | |
| 6. | 2S-7383 | [1] | BOLT (1/4-20X3.25-IN) | |
| 7. | 8F-8178 | [2] | BOLT (1/4-20X3.25-IN) | |
| 8. | 6B-4198 | [2] | BOLT (1/4-20X4.19-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP25320399
8N-3222: FASTENER GP-FUEL INJ PUMP
8N-3222 FASTENER GP-FUEL INJ PUMP
S/N 9NR1-UP
WOODWARD
PART OF 2W-3369, 7C-5221, 7C-5224, 7C-5227 PUMP GP-GOV & FUEL INJ
AN ATTACHMENT
S/N 9NR1-UP
WOODWARD
PART OF 2W-3369, 7C-5221, 7C-5224, 7C-5227 PUMP GP-GOV & FUEL INJ
AN ATTACHMENT
For full view, you need register
Parts for your 3306B GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2B-2955 | [1] | BOLT | |
| 2. | 8S-8158 | [1] | SEAL-WIRE | |
| 3. | 8S-7115 BD | LOCKWIRE | ||
| 4. | 6L-3528 | [1] | GASKET | |
| 5. | 2H-2292 | [1] | ROD-ADJUSTMENT | |
| 6. | 6V-8186 | [2] | NUT-FULL (5/16-24-THD) | |
| 7. | 5P-6672 | [2] | ROD END | |
| 8. | 3D-8752 | [2] | LOCKNUT (5/16-24-THD) | |
| 9. | 1B-1293 | [2] | BOLT (5/16-24X1.25-IN) | |
| 10. | 5S-0003 | [4] | NUT (5/16-18-THD) | |
| 11. | 4L-7547 | [4] | STUD-TAPERLOCK (5/16-18X2-IN) | |
| 12. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 13. | 5P-2645 C | [2] | ELBOW | |
| 14. | 9N-3370 CI | [1] | HOSE AS | |
| 15. | 8N-8082 C | [1] | COVER | |
| 16. | 0S-1590 | [2] | BOLT (3/8-16X2-IN) | |
| 17. | 3J-7354 C | [2] | SEAL-O-RING | |
| 18. | 4M-8303 C | [1] | SEAL-O-RING | |
| 19. | 0S-1615 C | [2] | BOLT (1/4-20X0.75-IN) | |
| 20. | 5P-0537 C | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
Information:
FUEL SYSTEM
CONTROL GP-GOVERNOR
Systems Operation
Caterpillar Parts SIS Catalog 3306B :
Truck sale:
41,500
Caterpillar 3306B, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
33,500
Caterpillar 3306B, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
- Stationary Generator Sets
RING POWER CORP.
38.001
Caterpillar D3306BEP, Stationaire Generatorsets, Bouw
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3306B, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
RING POWER CORP.
- Stationary Generator Sets
RING POWER CORP.