OPERATOR STATION
CONTROL GP-HYDRAULICHYDRAULIC SYSTEM
COOLER GPMOTOR GP
CYLINDER GP
OPERATOR STATION
CONTROL GP-HYDRAULIC
#SEBP25360920
158-7463: CONTROL AR-HYDRAULIC
158-7463 CONTROL AR-HYDRAULIC -DUAL TILT
S/N 9EM1-UP
FOR USE WITH @@@@@237-9234@@@@@, @@@@@245-3558@@@@@
CANNOT BE USED WITH @@@@@130-4559@@@@@, @@@@@220-8044@@@@@, @@@@@128-5054@@@@@, @@@@@211-5262@@@@@
AN ATTACHMENT
S/N 9EM1-UP
FOR USE WITH @@@@@237-9234@@@@@, @@@@@245-3558@@@@@
CANNOT BE USED WITH @@@@@130-4559@@@@@, @@@@@220-8044@@@@@, @@@@@128-5054@@@@@, @@@@@211-5262@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
#SEBP25360921
382-6870: CONTROL AR-HYDRAULIC
382-6870 CONTROL AR-HYDRAULIC -DUAL TILT
S/N 9EM1-UP
FOR USE WITH @@@@@237-9234@@@@@, @@@@@245-3558@@@@@, DUAL TILT BLADE
CANNOT BE USED WITH @@@@@108-4213@@@@@, @@@@@130-4559@@@@@
AN ATTACHMENT
S/N 9EM1-UP
FOR USE WITH @@@@@237-9234@@@@@, @@@@@245-3558@@@@@, DUAL TILT BLADE
CANNOT BE USED WITH @@@@@108-4213@@@@@, @@@@@130-4559@@@@@
AN ATTACHMENT
For full view, you need register
#SEBP25360922
6Y-4857: CONTROL AR-HYDRAULIC
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6Y-3526 Y | [1] | ADAPTER GP-MOTOR | ||
| 6Y-4743 Y | [1] | LINES GP-STEERING | ||
| 9T-8345 Y | [1] | MOTOR GP-PISTON (STEERING) | ||
| S/N 9EM1-782 | ||||
| 159-7162 Y | [1] | MOTOR GP-PISTON (STEERING) | ||
| S/N 9EM783-UP | ||||
| 6E-1661 Y | [1] | PUMP GP-PISTON (STEERING) | ||
| S/N 9EM1-897 | ||||
| 139-4151 Y | [1] | PUMP GP-PISTON (STEERING) | ||
| S/N 9EM898-UP | ||||
| 6E-1716 Y | [1] | TANK & FILTER GP-HYDRAULIC | ||
| S/N 9EM1-782 | ||||
| 164-3700 Y | [1] | TANK & FILTER GP-HYDRAULIC | ||
| S/N 9EM783-UP | ||||
| 9T-8704 Y | [1] | VALVE GP-PRESSURE CONTROL (STEERING) | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25360923
8E-2797: CONTROL AR-HYDRAULIC
8E-2797 CONTROL AR-HYDRAULIC -RIPPER PIN PULLER
S/N 9EM1-1236
PART OF 325-4778 PULLER AR-PIN
AN ATTACHMENT
S/N 9EM1-1236
PART OF 325-4778 PULLER AR-PIN
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-6985 | [1] | PLATE AS | |
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 2. | 6T-4531 Y | [1] | VALVE & MTG GP-CONTROL (RIPPER PIN PULLER) | |
| 3. | 7T-0628 I | [1] | HOSE AS | |
| 4. | 6V-8397 | [4] | SEAL-O-RING | |
| 5. | 6V-8724 | [4] | ELBOW | |
| 6. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 7X-3325 | [2] | BOLT-LOCKING (1/2-13-THD) | ||
| 7. | 5T-9996 I | [1] | HOSE AS | |
| 8. | 3T-3045 | [1] | CLIP AS | |
| 9. | 101-2915 | [1] | FILM-INSTRUCTION (RIPPER PIN PULLER SWITCH) | |
| 10. | 6T-6970 | [1] | SWITCH AS-TOGGLE (RIPPER PIN PULLER) | |
| 3L-8187 | [3] | LOCKWASHER | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 11. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 8T-9101 | [4] | BOLT (3/8-16X2.75-IN) | ||
| 12. | 3J-1907 | [6] | SEAL-O-RING | |
| 13. | 8C-8988 | [2] | ELBOW | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25360924
8E-2797: CONTROL AR-HYDRAULIC
8E-2797 CONTROL AR-HYDRAULIC -RIPPER PIN PULLER
S/N 9EM1237-1262
PART OF 325-4778 PULLER AR-PIN
AN ATTACHMENT
S/N 9EM1237-1262
PART OF 325-4778 PULLER AR-PIN
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | C | [1] | PLATE AS | |
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 2. | 188-6140 CY | [1] | VALVE & MTG GP-CONTROL (RIPPER PIN PULLER) | |
| 3. | 7T-0628 I | [1] | HOSE AS | |
| 4. | 6V-8397 | [4] | SEAL-O-RING | |
| 5. | 6V-8724 | [4] | ELBOW | |
| 6. | 3J-1907 | [6] | SEAL-O-RING | |
| 7. | 5T-9996 I | [1] | HOSE AS | |
| 8. | 3T-3045 | [1] | CLIP AS | |
| 9. | 6T-6970 | [1] | SWITCH AS-TOGGLE (RIPPER PIN PULLER) | |
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 3L-8187 | [3] | LOCKWASHER | ||
| 10. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 11. | 8T-8915 C | [4] | BOLT (3/8-16X3.25-IN) | |
| 12. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 8T-8917 C | [2] | BOLT (1/2-13X1.25-IN) | |
| 14. | 137-3936 | [1] | FILM-INSTRUCTION (RIPPER PIN PULLER SWITCH) | |
| 15. | 8C-8988 | [2] | ELBOW | |
| 16. | 200-8257 C | [1] | HARNESS AS | |
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25360925
8E-2797: CONTROL AR-HYDRAULIC
8E-2797 CONTROL AR-HYDRAULIC -RIPPER PIN PULLER
S/N 9EM1263-UP
PART OF 325-4778 PULLER AR-PIN
AN ATTACHMENT
S/N 9EM1263-UP
PART OF 325-4778 PULLER AR-PIN
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | PLATE AS | ||
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 2. | 188-6140 Y | [1] | VALVE & MTG GP-CONTROL (RIPPER PIN PULLER) | |
| 3. | 7T-0628 I | [1] | HOSE AS | |
| 4. | 6V-8397 | [4] | SEAL-O-RING | |
| 5. | 6V-8724 | [4] | ELBOW | |
| 6. | 3J-1907 | [6] | SEAL-O-RING | |
| 7. | 5T-9996 I | [1] | HOSE AS | |
| 8. | 6T-6970 | [1] | SWITCH AS-TOGGLE (RIPPER PIN PULLER) | |
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 3L-8187 | [3] | LOCKWASHER | ||
| 9. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 10. | 8T-8915 | [4] | BOLT (3/8-16X3.25-IN) | |
| 11. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 8T-8917 | [2] | BOLT (1/2-13X1.25-IN) | |
| 13. | 137-3936 | [1] | FILM-INSTRUCTION (RIPPER PIN PULLER SWITCH) | |
| 14. | 8C-8988 | [2] | ELBOW | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25360926
8E-2797: CONTROL AR-HYDRAULIC
8E-2797 CONTROL AR-HYDRAULIC -RIPPER PIN PULLER
S/N 9EM7400-UP
PART OF 325-4778 PULLER AR-PIN
AN ATTACHMENT
S/N 9EM7400-UP
PART OF 325-4778 PULLER AR-PIN
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | PLATE AS | ||
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 2. | 188-6140 Y | [1] | VALVE & MTG GP-CONTROL (RIPPER PIN PULLER) | |
| 3. | 7T-0628 I | [1] | HOSE AS | |
| 4. | 6V-8397 | [4] | SEAL-O-RING | |
| 5. | 6V-8724 | [4] | ELBOW | |
| 6. | 3J-1907 | [6] | SEAL-O-RING | |
| 7. | 5T-9996 I | [1] | HOSE AS | |
| 8. | 146-0240 C | [1] | SWITCH GP-TOGGLE (LOCKING)(RIPPER PIN PULLER) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 10. | 8T-8915 | [4] | BOLT (3/8-16X3.25-IN) | |
| 11. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 8T-8917 | [2] | BOLT (1/2-13X1.25-IN) | |
| 13. | 137-3936 | [1] | FILM-INSTRUCTION (RIPPER PIN PULLER SWITCH) | |
| 14. | 8C-8988 | [2] | ELBOW | |
| 15. | 7K-1181 C | [5] | STRAP-CABLE | |
| 16. | 375-9268 C | [1] | HARNESS AS-WIRING | |
| 9X-3402 | [11] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 189-3158 | [2] | SUPPRESSOR-ARC | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25360927
109-9677: COOLER GP-HYDRAULIC OIL
109-9677 COOLER GP-HYDRAULIC OIL
S/N 9EM1-UP
PART OF 105-9698 INSTALLATION AR-ENGINE
S/N 9EM1-UP
PART OF 105-9698 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 217-2659 | [1] | BRACKET AS | |
| 2. | 110-6938 | [1] | BRACKET AS | |
| 7M-7794 | [2] | STUD-WELD (9.4X21.5X25.5-MM) | ||
| 3. | 118-0227 | [1] | BRACKET AS | |
| 7M-7794 | [2] | STUD-WELD (9.4X21.5X25.5-MM) | ||
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 4. | 172-1672 | [1] | BRACKET AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 5. | 234-8945 | [1] | CORE AS-HYDRAULIC OIL COOLER | |
| 8T-6767 | [2] | PLUG-PIPE (3/8-18-THD) | ||
| 6. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 7. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 8. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 9. | 8T-2561 | [4] | WASHER-HARD (10.5X28.5X5-MM THK) | |
| 10. | 8T-4835 | [4] | BOLT (1/2-13X2-IN) | |
| 11. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) |
#SEBP25360928
512-5159: COVER GP-MOTOR
For full view, you need register
#SEBP25360929
336-1534: CYLINDER & LINES GP
336-1534 CYLINDER & LINES GP -BULLDOZER
S/N 9EM1-UP
COLD WEATHER, TILT
FOR USE WITH @@@@@227-5437@@@@@, @@@@@227-5439@@@@@, @@@@@245-3567@@@@@, @@@@@237-4368@@@@@, @@@@@237-4369@@@@@, @@@@@245-3566@@@@@
AN ATTACHMENT
S/N 9EM1-UP
COLD WEATHER, TILT
FOR USE WITH @@@@@227-5437@@@@@, @@@@@227-5439@@@@@, @@@@@245-3567@@@@@, @@@@@237-4368@@@@@, @@@@@237-4369@@@@@, @@@@@245-3566@@@@@
AN ATTACHMENT
For full view, you need register
