IMPLEMENTS
BULLDOZER GPIMPLEMENTS
BULLDOZER GP
#SEBP25361080
216-8306: BULLDOZER AR-SEMI-UNIVERSAL
216-8306 BULLDOZER AR-SEMI-UNIVERSAL -LOW GROUND PRESSURE
S/N LAA1-UP
FOR USE WITH @@@@@ 6I-8788@@@@@, @@@@@108-6979@@@@@, @@@@@108-6980@@@@@
AN ATTACHMENT
S/N LAA1-UP
FOR USE WITH @@@@@ 6I-8788@@@@@, @@@@@108-6979@@@@@, @@@@@108-6980@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
#SEBP25361081
227-5437: BULLDOZER AR-SEMI-UNIVERSAL
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 227-6315 Y | [1] | MOUNTING GP-CYLINDER | |
| 2. | 237-4366 Y | [1] | BLADE & EDGE GP-SEMI-UNIVERSAL | |
| 3. | 237-4368 Y | [1] | PUSH ARM GP-STABILIZER | |
| 4. | 237-4369 Y | [1] | LINES GP-TILT CYLINDER | |
| 5. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 6. | 237-7362 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | |
| 7. | 237-7363 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | |
| 2Y-9790 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD, NEAR TOP AT RIGHT END) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25361082
227-5439: BULLDOZER AR-SEMI-UNIVERSAL
227-5439 BULLDOZER AR-SEMI-UNIVERSAL
S/N DZX1-UP
FOR USE WITH @@@@@227-6315@@@@@, @@@@@237-7362@@@@@, @@@@@237-7363@@@@@
AN ATTACHMENT
S/N DZX1-UP
FOR USE WITH @@@@@227-6315@@@@@, @@@@@237-7362@@@@@, @@@@@237-7363@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 237-4366 Y | [1] | BLADE & EDGE GP-SEMI-UNIVERSAL | |
| 2. | 237-4368 Y | [1] | PUSH ARM GP-STABILIZER | |
| 3. | 237-4369 Y | [1] | LINES GP-TILT CYLINDER | |
| 4. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 2Y-9790 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD, NEAR TOP AT RIGHT END) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25361083
245-3557: BULLDOZER AR-SEMI-UNIVERSAL
245-3557 BULLDOZER AR-SEMI-UNIVERSAL -LOW GROUND PRESSURE
S/N DZR1-UP
FOR USE WITH @@@@@227-6315@@@@@, @@@@@237-7362@@@@@, @@@@@237-7363@@@@@
AN ATTACHMENT
S/N DZR1-UP
FOR USE WITH @@@@@227-6315@@@@@, @@@@@237-7362@@@@@, @@@@@237-7363@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | Y | [1] | BLADE & EDGE GP-SEMI-UNIVERSAL | |
| 2. | 247-0851 Y | [1] | PUSH ARM GP-STABILIZER | |
| 3. | 247-0852 Y | [1] | TRUNNION GP-BULLDOZER | |
| 4. | 256-4905 Y | [1] | LINES GP-TILT CYLINDER | |
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 2Y-9790 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD, NEAR TOP AT RIGHT END) | ||||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25361084
111-8279: BULLDOZER AR-UNIVERSAL
111-8279 BULLDOZER AR-UNIVERSAL
S/N BHE1-UP
REPLACED BY @@@@@159-1629@@@@@
AN ATTACHMENT
S/N BHE1-UP
REPLACED BY @@@@@159-1629@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8E-6150 Y | [1] | BLADE & EDGE GP-UNIVERSAL | ||
| 108-6979 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | ||
| 108-6980 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | ||
| 115-8392 Y | [1] | LIGHTING GP-FRONT | ||
| 115-6905 Y | [1] | LINES GP-TILT CYLINDER | ||
| -OR- | ||||
| 201-5703 Y | [1] | LINES GP-TILT CYLINDER | ||
| 6I-8788 Y | [1] | MOUNTING GP-CYLINDER | ||
| 118-3173 Y | [1] | PUSH ARM GP-STABILIZER | ||
| 9W-8276 Y | [1] | TRUNNION GP-BULLDOZER | ||
| 2Y-9790 | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD, NEAR TOP AT RH END) | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25361085
119-0486: BULLDOZER AR-UNIVERSAL
119-0486 BULLDOZER AR-UNIVERSAL
S/N BHE1-UP
REPLACED BY @@@@@159-1633@@@@@
AN ATTACHMENT
S/N BHE1-UP
REPLACED BY @@@@@159-1633@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8E-6150 Y | [1] | BLADE & EDGE GP-UNIVERSAL | ||
| 115-6905 Y | [1] | LINES GP-TILT CYLINDER | ||
| -OR- | ||||
| 201-5703 Y | [1] | LINES GP-TILT CYLINDER | ||
| 118-3173 Y | [1] | PUSH ARM GP-STABILIZER | ||
| 9W-8276 Y | [1] | TRUNNION GP-BULLDOZER | ||
| 2Y-9790 | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD, NEAR TOP AT RH END) | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25361086
159-1629: BULLDOZER AR-UNIVERSAL
159-1629 BULLDOZER AR-UNIVERSAL
S/N CXB1-UP
REPLACED BY @@@@@245-3566@@@@@
AN ATTACHMENT
S/N CXB1-UP
REPLACED BY @@@@@245-3566@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-8788 Y | [1] | MOUNTING GP-CYLINDER | |
| 2. | 8E-6150 Y | [1] | BLADE & EDGE GP-UNIVERSAL | |
| 3. | 9W-8276 Y | [1] | TRUNNION GP-BULLDOZER | |
| 4. | 108-6979 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | |
| 5. | 108-6980 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | |
| 6. | 118-3173 Y | [1] | PUSH ARM GP-STABILIZER | |
| 7. | 159-0068 Y | [1] | LIGHTING GP-FRONT (LIFT CYLINDER) | |
| 8. | 201-5703 CY | [1] | LINES GP-TILT CYLINDER | |
| 2Y-9790 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD, NEAR TOP AT RIGHT END) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25361087
159-1633: BULLDOZER AR-UNIVERSAL
159-1633 BULLDOZER AR-UNIVERSAL
S/N CXL1-UP
REPLACED BY @@@@@245-3567@@@@@
AN ATTACHMENT
S/N CXL1-UP
REPLACED BY @@@@@245-3567@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8E-6150 Y | [1] | BLADE & EDGE GP-UNIVERSAL | ||
| 201-5703 Y | [1] | LINES GP-TILT CYLINDER | ||
| 118-3173 Y | [1] | PUSH ARM GP-STABILIZER | ||
| 9W-8276 Y | [1] | TRUNNION GP-BULLDOZER | ||
| 2Y-9790 | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD, NEAR TOP AT RH END) | ||||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25361088
245-3566: BULLDOZER AR-UNIVERSAL
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 227-6315 Y | [1] | MOUNTING GP-CYLINDER | |
| 2. | 237-4368 Y | [1] | PUSH ARM GP-STABILIZER | |
| 3. | 237-4369 Y | [1] | LINES GP-TILT CYLINDER | |
| 4. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 5. | 237-7362 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | |
| 6. | 237-7363 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | |
| 7. | 245-3562 Y | [1] | BLADE & EDGE GP-UNIVERSAL | |
| 2Y-9790 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD, NEAR TOP AT RIGHT END) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25361089
245-3567: BULLDOZER AR-UNIVERSAL
245-3567 BULLDOZER AR-UNIVERSAL
S/N DZS1-UP
FOR USE WITH @@@@@227-6315@@@@@, @@@@@237-7362@@@@@, @@@@@237-7363@@@@@
AN ATTACHMENT
S/N DZS1-UP
FOR USE WITH @@@@@227-6315@@@@@, @@@@@237-7362@@@@@, @@@@@237-7363@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 237-4368 Y | [1] | PUSH ARM GP-STABILIZER | |
| 2. | 237-4369 Y | [1] | LINES GP-TILT CYLINDER | |
| 3. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 4. | 245-3562 Y | [1] | BLADE & EDGE GP-UNIVERSAL | |
| 2Y-9790 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD, NEAR TOP AT RIGHT END) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
IMPLEMENTS
BULLDOZER GP
Special Instruction
Installation of 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with a Single Tilt Cylinder{6053, 6078}
Installation of 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with a Single Tilt Cylinder{6053, 6078}
Installation of 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with a Single Tilt Cylinder{6053, 6078}
Installation of 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with Dual Tilt Cylinders{6053, 6078}
Installation of 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with Dual Tilt Cylinders{6053, 6078}
Installation of 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with Dual Tilt Cylinders{6053, 6078}
Installation of Modified 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with Dual Tilt Cylinders on D8R LGP Tractors{6053, 6078}
Installation of Modified 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with Dual Tilt Cylinders on D8R LGP Tractors{6053, 6078}
Installation of Modified 8SU (S/N: 2TP; 3MP) and 8U (S/N: 2WP) Bulldozer with Dual Tilt Cylinders on D8R LGP Tractors{6053, 6078}
