IMPLEMENTS
C-FRAME GPBULLDOZER GP
IMPLEMENTS
C-FRAME GP
#SEBP25361090
159-8142: C-FRAME GP
159-8142 C-FRAME GP
S/N D1E1-UP; D1F1-UP; 9EM1-UP; BHR1-99999
PART OF 159-8377, 159-8378, 175-3852, 261-2351, 261-2352, 337-7119 BULLDOZER AR-ANGLING, 385-5581 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
S/N D1E1-UP; D1F1-UP; 9EM1-UP; BHR1-99999
PART OF 159-8377, 159-8378, 175-3852, 261-2351, 261-2352, 337-7119 BULLDOZER AR-ANGLING, 385-5581 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-9571 | [2] | KEY | |
| 2. | 193-3063 | [2] | CAP AS-BEARING | |
| 3. | 9W-7602 B | [56] | SHIM (0.8-MM THK) | |
| 4. | 237-4872 | [1] | PIN-PIVOT | |
| 5. | 8T-4131 M | [32] | NUT (M20X2.5-THD) | |
| 6. | 3E-9850 M | [4] | BOLT (M30X3.5X220-MM) | |
| 7. | 163-2013 | [1] | RETAINER | |
| 8. | 7X-2562 M | [2] | BOLT (M20X2.5X45-MM) | |
| 9. | 7X-2565 M | [32] | BOLT (M20X2.5X100-MM) | |
| 10. | 195-6283 M | [4] | NUT-SQUARE (M30X3.5-THD) | |
| 11. | 8T-4123 | [64] | WASHER (22X35X3.5-MM THK) | |
| 12. | 159-8143 | [1] | C-FRAME AS (LH) | |
| 13. | 1J-6744 | [1] | BEARING | |
| 14. | 1U-2533 | [1] | BAR | |
| 15. | 3G-9626 | [1] | END-JOINT | |
| 16. | 7T-5140 | [1] | STEP | |
| 17. | 8E-6443 | [1] | TRUNNION AS | |
| 9J-0123 | [1] | TRUNNION | ||
| 18. | 8P-9770 | [1] | PLATE | |
| 19. | 159-8144 | [1] | C-FRAME AS (RH) | |
| 20. | 1J-6744 | [1] | BEARING | |
| 21. | 1U-2533 | [1] | BAR | |
| 22. | 7T-5140 | [1] | STEP | |
| 23. | 8E-6444 | [1] | TRUNNION AS | |
| 9J-0123 | [1] | TRUNNION | ||
| 24. | 8P-9770 | [1] | PLATE | |
| 25. | 159-8939 | [1] | ADAPTER AS | |
| [2] | BUSHING | |||
| 26. | 5M-6214 | [1] | PLUG (1/8-27 PTF) | |
| 27. | 9X-8258 | [4] | WASHER (33X56X6-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP25361091
8E-6191: C-FRAME GP
8E-6191 C-FRAME GP
S/N 4ZP1-99999
TWO PIECE
PART OF 111-8283, 125-9171 BULLDOZER AR-ANGLING
AN ATTACHMENT
S/N 4ZP1-99999
TWO PIECE
PART OF 111-8283, 125-9171 BULLDOZER AR-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6F-7523 | [2] | CAP AS-BEARING | |
| 2. | 8E-6440 | [1] | C-FRAME AS (LH) | |
| 3. | 7T-5140 | [1] | STEP | |
| 4. | 8P-9770 | [1] | PLATE | |
| 5. | 1U-2533 | [1] | BAR | |
| 6. | 1J-6744 | [1] | BEARING | |
| 7. | 9J-0123 | [1] | TRUNNION | |
| 8. | 8F-4387 | [6] | PLATE | |
| 3J-7798 | [3] | BRACKET | ||
| 9. | 8E-6441 | [1] | C-FRAME AS (RH) | |
| 10. | 8P-9770 | [1] | PLATE | |
| 11. | 8E-5488 | [2] | BUSHING | |
| 5M-6214 | [1] | PLUG (1/8-27 PTF) | ||
| 12. | 9J-0123 | [1] | TRUNNION | |
| 13. | 3J-7798 | [3] | BRACKET | |
| 8F-4387 | [6] | PLATE | ||
| 14. | 1J-6744 | [1] | BEARING | |
| 15. | 7T-5140 | [1] | STEP | |
| 16. | 1U-2533 | [1] | BAR | |
| 17. | 3G-9571 | [2] | KEY | |
| 18. | 8E-6442 | [1] | PIN-PIVOT | |
| 19. | 9W-7602 B | [56] | SHIM (0.8-MM THK) | |
| 20. | 9X-6385 M | [4] | BOLT (M30X3.5X200-MM) | |
| 8C-8722 M | [4] | NUT (M30X3.5-THD) | ||
| 21. | 163-2013 | [1] | RETAINER | |
| 22. | 7X-2562 M | [2] | BOLT (M20X2.5X45-MM) | |
| 23. | 7X-2565 M | [32] | BOLT (M20X2.5X100-MM) | |
| 8T-4131 M | [32] | NUT (M20X2.5-THD) | ||
| 8T-4123 | [64] | WASHER (22X35X3.5-MM THK) | ||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP25361092
337-7115: INSTALLATION AR-BULLDOZER
337-7115 INSTALLATION AR-BULLDOZER
S/N 9EM1-UP
FOR USE WITH SEMI-UNIVERSAL BLADE GP, UNIVERSAL BLADE GP
AN ATTACHMENT
S/N 9EM1-UP
FOR USE WITH SEMI-UNIVERSAL BLADE GP, UNIVERSAL BLADE GP
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-2472 | [2] | PIN | |
| 2. | 4T-7534 | [2] | PIN | |
| 3. | 6J-5179 | [4] | RETAINER | |
| 4. | 8E-6758 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 4A. | 8E-6752 | [4] | BUSHING | |
| 5. | 237-4368 Y | [1] | PUSH ARM GP-STABILIZER | |
| 6. | 237-4369 Y | [1] | LINES GP-TILT CYLINDER | |
| 7. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 8. | 7X-2574 M | [8] | BOLT (M24X3X45-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25361093
337-7120: INSTALLATION AR-BULLDOZER
337-7120 INSTALLATION AR-BULLDOZER
S/N 9EM1-UP
FOR USE WITH LGP BLADE GP-SEMI-UNIVERSAL, GAGE AR-LGP
AN ATTACHMENT
S/N 9EM1-UP
FOR USE WITH LGP BLADE GP-SEMI-UNIVERSAL, GAGE AR-LGP
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-2472 | [2] | PIN | |
| 2. | 4T-7534 | [2] | PIN | |
| 3. | 6J-5179 | [4] | RETAINER | |
| 4. | 8E-6758 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 8E-6752 | [4] | BUSHING | ||
| 5. | 247-0851 Y | [1] | PUSH ARM GP-STABILIZER | |
| 6. | 247-0852 Y | [1] | TRUNNION GP-BULLDOZER | |
| 7. | 256-4905 Y | [1] | LINES GP-TILT CYLINDER | |
| 8. | 7X-2574 M | [8] | BOLT (M24X3X45-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25361094
385-5575: INSTALLATION AR-BULLDOZER
385-5575 INSTALLATION AR-BULLDOZER -SEMI-UNIVERSAL
S/N 9EM1-UP
Type 1
FOR USE WITH @@@@@417-3721@@@@@, @@@@@417-3722@@@@@
AN ATTACHMENT
S/N 9EM1-UP
Type 1
FOR USE WITH @@@@@417-3721@@@@@, @@@@@417-3722@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-2472 | [2] | PIN | |
| 2. | 3G-7016 | [1] | PIN | |
| 3. | 4T-7534 | [4] | PIN | |
| 4. | 6J-5179 | [8] | RETAINER | |
| 5. | 8E-6758 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 5A. | 8E-6752 | [4] | BUSHING | |
| 6. | 237-4369 Y | [1] | LINES GP-TILT CYLINDER | |
| 7. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 8. | 239-3340 Y | [1] | LINK GP-STABILIZER | |
| 9. | 239-9940 | [1] | PIN | |
| 10. | 240-7347 Y | [1] | CYLINDER GP-TILT (BULLDOZER) | |
| 11. | 7X-2573 M | [2] | BOLT (M24X3X40-MM) | |
| 12. | 7X-2574 M | [14] | BOLT (M24X3X45-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25361095
385-5575: INSTALLATION AR-BULLDOZER
385-5575 INSTALLATION AR-BULLDOZER -SEMI-UNIVERSAL
S/N 9EM1-UP
Type 2
FOR USE WITH @@@@@417-3721@@@@@, @@@@@417-3722@@@@@
AN ATTACHMENT
S/N 9EM1-UP
Type 2
FOR USE WITH @@@@@417-3721@@@@@, @@@@@417-3722@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-2472 | [2] | PIN | |
| 2. | 3G-7016 | [1] | PIN | |
| 3. | 4T-7534 | [4] | PIN | |
| 4. | 6J-5179 | [8] | RETAINER | |
| 5. | 8E-6758 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 5A. | 8E-6752 | [4] | BUSHING | |
| 6. | 237-4369 Y | [1] | LINES GP-TILT CYLINDER | |
| 7. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 8. | 239-3340 Y | [1] | LINK GP-STABILIZER | |
| 9. | 239-9940 | [1] | PIN | |
| 10. | 492-0310 CY | [1] | CYLINDER GP-TILT (BULLDOZER) | |
| 11. | 7X-2573 M | [2] | BOLT (M24X3X40-MM) | |
| 12. | 7X-2574 M | [14] | BOLT (M24X3X45-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25361096
385-5575: INSTALLATION AR-BULLDOZER
385-5575 INSTALLATION AR-BULLDOZER -SEMI-UNIVERSAL
S/N 9EM1-UP
Type 3
FOR USE WITH @@@@@417-3721@@@@@, @@@@@417-3722@@@@@
AN ATTACHMENT
S/N 9EM1-UP
Type 3
FOR USE WITH @@@@@417-3721@@@@@, @@@@@417-3722@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-2472 | [2] | PIN | |
| 2. | 3G-7016 | [1] | PIN | |
| 3. | 4T-7534 | [4] | PIN | |
| 4. | 6J-5179 | [8] | RETAINER | |
| 5. | 8E-6758 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 5A. | 8E-6752 | [4] | BUSHING | |
| 6. | 237-4369 Y | [1] | LINES GP-TILT CYLINDER | |
| 7. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 8. | 239-3340 Y | [1] | LINK GP-STABILIZER | |
| 9. | 239-9940 | [1] | PIN | |
| 10. | 491-0252 CY | [1] | CYLINDER GP-TILT (BULLDOZER) | |
| 11. | 7X-2573 M | [2] | BOLT (M24X3X40-MM) | |
| 12. | 7X-2574 M | [14] | BOLT (M24X3X45-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25361097
385-5576: INSTALLATION AR-BULLDOZER
385-5576 INSTALLATION AR-BULLDOZER
S/N 9EM1-UP
SINGLE TILT, GUARDED
Type 1
AN ATTACHMENT
S/N 9EM1-UP
SINGLE TILT, GUARDED
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-2472 | [2] | PIN | |
| 2. | 3G-7016 | [1] | PIN | |
| 3. | 4T-7534 | [4] | PIN | |
| 4. | 6J-5179 | [8] | RETAINER | |
| 5. | 8E-6758 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 5A. | 8E-6752 | [4] | BUSHING | |
| 6. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 7. | 239-3340 Y | [1] | LINK GP-STABILIZER | |
| 8. | 239-9940 | [1] | PIN | |
| 9. | 240-7347 Y | [1] | CYLINDER GP-TILT (BULLDOZER) | |
| 10. | 386-5277 Y | [1] | LINES GP-TILT CYLINDER | |
| 11. | 7X-2573 M | [2] | BOLT (M24X3X40-MM) | |
| 12. | 7X-2574 M | [14] | BOLT (M24X3X45-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25361098
385-5576: INSTALLATION AR-BULLDOZER
385-5576 INSTALLATION AR-BULLDOZER
S/N 9EM1-UP
SINGLE TILT, GUARDED
Type 2
AN ATTACHMENT
S/N 9EM1-UP
SINGLE TILT, GUARDED
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-2472 | [2] | PIN | |
| 2. | 3G-7016 | [1] | PIN | |
| 3. | 4T-7534 | [4] | PIN | |
| 4. | 6J-5179 | [8] | RETAINER | |
| 5. | 8E-6758 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 5A. | 8E-6752 | [4] | BUSHING | |
| 6. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 7. | 239-3340 Y | [1] | LINK GP-STABILIZER | |
| 8. | 239-9940 | [1] | PIN | |
| 9. | 492-0310 CY | [1] | CYLINDER GP-TILT (BULLDOZER) | |
| 10. | 386-5277 Y | [1] | LINES GP-TILT CYLINDER | |
| 11. | 7X-2573 M | [2] | BOLT (M24X3X40-MM) | |
| 12. | 7X-2574 M | [14] | BOLT (M24X3X45-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25361099
385-5576: INSTALLATION AR-BULLDOZER
385-5576 INSTALLATION AR-BULLDOZER
S/N 9EM1-UP
SINGLE TILT, GUARDED
Type 3
AN ATTACHMENT
S/N 9EM1-UP
SINGLE TILT, GUARDED
Type 3
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-2472 | [2] | PIN | |
| 2. | 3G-7016 | [1] | PIN | |
| 3. | 4T-7534 | [4] | PIN | |
| 4. | 6J-5179 | [8] | RETAINER | |
| 5. | 8E-6758 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 5A. | 8E-6752 | [4] | BUSHING | |
| 6. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 7. | 239-3340 Y | [1] | LINK GP-STABILIZER | |
| 8. | 239-9940 | [1] | PIN | |
| 9. | 491-0252 CY | [1] | CYLINDER GP-TILT (BULLDOZER) | |
| 10. | 386-5277 Y | [1] | LINES GP-TILT CYLINDER | |
| 11. | 7X-2573 M | [2] | BOLT (M24X3X40-MM) | |
| 12. | 7X-2574 M | [14] | BOLT (M24X3X45-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
