AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

158-7466 LINKAGE GP-IMPLEMENT -DUAL TILT S/N 9EM1-UP PART OF 158-7463, 382-6870 CONTROL AR-HYDRAULIC AN ATTACHMENT D8R


IMPLEMENTS
LINKAGE GP
BULLDOZER GP

TRACK-TYPE TRACTOR D8R TRACK-TYPE TRACTOR 9EM
 D8R TRACK-TYPE TRACTOR 9EM00001-UP (MACHINE) POWERED BY 3406C Engine SEBP2536 D8R 9EM   (1996)

IMPLEMENTS

LINKAGE GP
LINKAGE GP-IMPLEMENT
115-5784 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
158-7466 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
6Y-3522 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
6Y-3528 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
6Y-3528 LINKAGE GP-IMPLEMENT
 

#SEBP25361120
 

158-7466: LINKAGE GP-IMPLEMENT

158-7466 LINKAGE GP-IMPLEMENT -DUAL TILT
S/N 9EM1-UP
PART OF 158-7463, 382-6870 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i03294265 SEBP2536
1587466 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-8680 Y [1] SWITCH GP-HANDLE (DUAL TILT CONTROL)  
2. 9W-2381 [1] ADAPTER  
3. 8C-8514 [2] SCREW-MACHINE (8-32X0.375-IN)  
4. 4B-4863 [2] WASHER (4.7X11X1.2-MM THK)  
5. 7K-1181 [3] STRAP-CABLE  
6. 5P-6003 D TUBE (0.1-M)  
8. 103-8120 [1] HARNESS AS-WIRING (DUAL TILT CONTROL)  
9. 102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
10. 9X-2270 [1] FILM-INSTRUCTION (BULLDOZER CONTROL)  
11. 7X-0448 [1] NUT (5/8-11-THD)  
12. 158-7464 [1] LEVER AS  
  D   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
 

#SEBP25361121
 

6Y-3522: LINKAGE GP-IMPLEMENT

6Y-3522 LINKAGE GP-IMPLEMENT -BULLDOZER
S/N 9EM1-UP
PART OF 109-7183 CONTROL AR-HYDRAULIC
i00390827 SEBP2536
6Y3522 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-6894 [1] HANDLE  
2. 6B-6684 [1] NUT-FULL (1/2-20-THD)  
3. 3P-3676 [1] CLAMP  
4. 4L-9337 [1] BOLT (3/8-16X1.5-IN)  
  6V-8801 [1] NUT (3/8-16-THD)  
5. 6Y-4823 [1] ROD  
6. 174-5732 [1] SHAFT  
7. 8E-5962 [1] PLATE  
8. 174-5733 [1] SHAFT  
  1H-1200 [1] PIN-SPRING  
9. 6Y-4855 [1] ROD  
10. 8E-7364 [1] BOOT  
11. 2L-6267 [2] LOCKNUT (3/8-24-THD)  
12. 5J-5315 [2] ROD END  
13. 6V-8183 [4] NUT-FULL (3/8-24-THD)  
14. 4L-6454 [4] BOLT (3/8-16X1-IN)  
15. 5P-1075 [6] WASHER-HARD (10.2X22.5X3-MM THK)  
16. 3T-9345 [1] BRACKET  
17. 4J-3044 [4] BEARING AS-NEEDLE  
  8T-0741 [8] SEAL-LIP TYPE  
18. 1M-1341 [2] END-YOKE ROD  
  8T-8932 [2] PIN AS-SPRING  
19. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
20. 6V-1193 [4] SCREW-HEX SOCKET (3/8-16X0.625-IN)  
21. 3T-7376 [1] CHANNEL AS  
  9F-2978 [4] NUT-WELD (3/8-16-THD)  
  7T-1099 [1] LINK  
22. 127-6362 [1] LEVER AS  
23. 169-1644 [2] BOOT  
24. 127-5696 [1] PLATE AS  
  [1] RIVET  
  109-0628 [1] HINGE  
  122-6133 [2] WASHER (CURVED SPRING)  
25. 9M-5617 [1] GROMMET  
26. 9D-9736 [1] BUMPER  
27. 102-2913 [1] FILM-INSTRUCTION (BULLDOZER CONTROL)  
 

#SEBP25361122
 

6Y-3528: LINKAGE GP-IMPLEMENT

6Y-3528 LINKAGE GP-IMPLEMENT -RIPPER
S/N 9EM1-1720
PART OF 108-1011 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00390959 SEBP2536
6Y3528 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-4474 [1] KNOB AS  
2. 9S-1354 C [3] NUT (5/8-18-THD)  
3. 6Y-4822 [1] ROD  
4. 5J-5315 [1] ROD END  
5. 169-1644 C [1] BOOT  
6. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
7. 2L-6267 [1] LOCKNUT (3/8-24-THD)  
8. 9N-4475 [1] KNOB AS  
  9R-1767 [1] BOOT  
9. 9R-2644 [1] BUSHING-TERMINAL  
10. 3E-0306 [1] SWITCH AS (RIPPER SHANK ADJ)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
11. 1M-1341 [1] END-YOKE ROD  
12. 8T-8932 [1] PIN AS-SPRING  
13. 110-2028 [2] SCREW-PAN HEAD (10-14X0.75-IN)  
14. 123-0111 C [1] LEVER AS  
15. 4J-3044 [2] BEARING AS-NEEDLE  
16. 8T-0741 [4] SEAL-LIP TYPE  
17. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
18. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
19. 3T-9361 [1] BRACKET AS  
20. 3T-9351 [1] SHAFT  
21. 8T-2637 [1] PIN-SPRING  
22. 8E-5962 [1] PLATE  
23. 8E-7364 [1] BOOT  
24. 3S-2093 [1] STRAP-CABLE  
25. 3T-3048 [3] CLIP AS  
26. 7K-1181 [3] STRAP-CABLE  
27. 8E-4863 [1] WIRE AS  
28. 7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
29. 9M-5617 C [1] GROMMET  
30. 123-5802 C [1] PLATE AS  
31. 123-5803 C [1] PLATE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25361123
 

6Y-3528: LINKAGE GP-IMPLEMENT

6Y-3528 LINKAGE GP-IMPLEMENT -RIPPER
S/N 9EM1721-UP
PART OF 108-1011 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02308792 SEBP2536
6Y3528 LINKAGE GP-IMPLEMENT Parts scheme 6Y3528 LINKAGE GP-IMPLEMENT Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-4474 [1] KNOB AS (RIPPER CONTROL)  
  110-2028 [2] SCREW-PAN HEAD (10-14X0.75-IN)  
2. 9S-1354 [3] NUT (5/8-18-THD)  
3. 6Y-4822 [1] ROD  
4. 5J-5315 [1] ROD END  
5. 169-1644 [1] BOOT  
6. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
7. 2L-6267 [1] LOCKNUT (3/8-24-THD)  
8. 9N-4475 [1] KNOB AS  
  9R-1767 [1] BOOT  
9. 9R-2644 [1] BUSHING-TERMINAL  
10. 3E-0306 [1] SWITCH AS (RIPPER SHANK IN, OUT)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
11. 1M-1341 [1] END-YOKE ROD  
12. 8T-8932 [1] PIN AS-SPRING  
13. 110-2028 [2] SCREW-PAN HEAD (10-14X0.75-IN)  
14. 123-0111 [1] LEVER AS  
15. 4J-3044 [2] BEARING AS-NEEDLE  
16. 8T-0741 [4] SEAL-LIP TYPE  
17. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
18. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
19. 3T-9361 [1] BRACKET AS  
20. 3T-9351 [1] SHAFT  
21. 8T-2637 [1] PIN-SPRING  
22. 8E-5962 [1] PLATE  
23. 8E-7364 [1] BOOT  
24. 102-2914 [1] FILM-INSTRUCTION (RIPPER CONTROL)  
25. 7N-9737 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
26. 3T-3048 C [2] CLIP AS  
27. 7K-1181 [3] STRAP-CABLE  
28. 225-8531 C [1] HARNESS AS-SOLENOID (DIVERTER VALVE)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
29. 3S-2093 [1] STRAP-CABLE  
30. 123-5802 [1] PLATE AS  
31. 123-5803 [1] PLATE  
32. 9M-5617 [1] GROMMET  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25361124
 

109-5147: PUSH ARM GP

109-5147 PUSH ARM GP -LH
S/N LAA1-UP; CXB1-UP; BHE1-UP; CXL1-UP; 3MP1-UP; 9TP1-UP; BHW1-UP
PART OF 118-3173, 216-8304 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i00490907 SEBP2536
1095147 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-7602 B [26] SHIM (0.8-MM THK)  
2. 195-6283 M [2] NUT-SQUARE (M30X3.5-THD)  
3. 193-3063 [1] CAP AS-BEARING  
4. 3E-9850 M [2] BOLT (M30X3.5X220-MM)  
5. 106-0786 [1] PUSH ARM AS (LH)  
6. 8E-6172 [1] BRACKET AS  
  3G-9598 [2] BUSHING  
7. 1J-6740 [1] BEARING AS  
8. 6I-8093 [1] BRACKET AS  
9. 7T-5140 [1] STEP  
10. 8P-9770 [1] PLATE  
11. 9X-8258 [2] WASHER (33X56X6-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25361125
 

158-6397: PUSH ARM GP

158-6397 PUSH ARM GP -LH
S/N 9EM1-UP
PART OF 158-6394 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i01488677 SEBP2536
1586397 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 193-3063 [1] CAP AS-BEARING  
2. 9W-7602 B [26] SHIM (0.8-MM THK)  
3. 158-6395 [1] PUSH ARM AS (LH)  
3A. 1J-6740 [1] BEARING AS  
3B. 3G-7000 [1] BRACKET AS  
3C. 7T-5140 [1] STEP  
3D. 8E-6172 [1] BRACKET AS  
3E. 3G-9598 [2] BUSHING  
3F. [1] GUARD  
3G. 8P-9770 [1] PLATE  
4. 3E-9850 M [2] BOLT (M30X3.5X220-MM)  
5. 195-6283 M [2] NUT-SQUARE (M30X3.5-THD)  
6. 9X-8258 [2] WASHER (33X56X6-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25361126
 

239-4212: PUSH ARM GP

239-4212 PUSH ARM GP -BULLDOZER, LH
S/N A5G1-UP; 9EM1-UP; DZR1-UP; B8S1-UP; DZS1-UP; DZX1-UP
PART OF 417-3722 PUSH ARM GP, 237-4368, 247-0851 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i02155563 SEBP2536
2394212 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-7602 B [26] SHIM (0.8-MM THK)  
2. 193-3063 [1] CAP AS-BEARING  
3. 195-6283 M [2] NUT-SQUARE (M30X3.5-THD)  
4. 239-4215 [1] PUSH ARM AS (LH)  
4A. 7T-5140 [1] STEP  
4B. 109-5675 [1] BRACKET AS (LH)  
4C. 3G-9598 [2] BUSHING  
4D. 1J-6740 [1] BEARING AS  
4E. 239-4218 [1] BRACKET AS  
5. 3E-9850 M [2] BOLT (M30X3.5X220-MM)  
6. 9X-8258 [2] WASHER (33X56X6-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25361127
 

239-4224: PUSH ARM GP

239-4224 PUSH ARM GP -BULLDOZER, RH
S/N A5G1-UP; 9EM1-UP; DZR1-UP; B8S1-UP; DZS1-UP; DZX1-UP
PART OF 417-3722 PUSH ARM GP, 237-4368, 237-9236, 247-0851, 261-4801, 417-3721 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i02155566 SEBP2536
2394224 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-7602 B [26] SHIM (0.8-MM THK)  
2. 193-3063 [1] CAP AS-BEARING  
3. 195-6283 M [2] NUT-SQUARE (M30X3.5-THD)  
4. 239-4225 [1] PUSH ARM AS (RH)  
4A. 1U-2533 [1] BAR  
4B. 7T-5140 [1] STEP  
4C. 8P-9770 [1] PLATE  
4D. 9W-1447 [1] GUARD  
4E. 1J-6740 [1] BEARING AS  
4F. 239-4227 [1] BRACKET AS  
4G. 109-5674 [1] BRACKET AS (RH)  
4H. 3G-9598 [2] BUSHING  
5. 3E-9850 M [2] BOLT (M30X3.5X220-MM)  
6. 9X-8258 [2] WASHER (33X56X6-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25361128
 

240-3395: PUSH ARM GP

240-3395 PUSH ARM GP -BULLDOZER, LH
S/N 9EM1-UP
PART OF 237-9236, 261-4801, 417-3721 PUSH ARM GP-STABILIZER
AN ATTACHMENT
i02243216 SEBP2536
2403395 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-7602 B [26] SHIM (0.8-MM THK)  
2. 193-3063 [1] CAP AS-BEARING  
3. 195-6283 M [2] NUT-SQUARE (M30X3.5-THD)  
4. 240-3396 [1] PUSH ARM AS (LH)  
4A. 364-3057 [1] STEP AS  
4B. 133-5901 [1] GUARD  
4C. 109-5675 [1] BRACKET AS (LH)  
4D. 3G-9598 [2] BUSHING  
4E. 1J-6740 [1] BEARING AS  
4F. 239-4227 [1] BRACKET AS  
4G. 8P-9770 [1] PLATE  
5. 3E-9850 M [2] BOLT (M30X3.5X220-MM)  
6. 9X-8258 [2] WASHER (33X56X6-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25361129
 

417-3722: PUSH ARM GP

417-3722 PUSH ARM GP -STABILIZER
S/N 9EM1-UP
CANNOT BE USED WITH @@@@@417-3721@@@@@
AN ATTACHMENT
i05243998 SEBP2536
4173722 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D8R TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 239-4212 Y [1] PUSH ARM GP (LH)  
2. 239-4224 Y [1] PUSH ARM GP (RH)  
3. 239-4237 [1] BRACE AS  
3A. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
3B. 7J-3296 [1] RING-LOCK  
3C. 7J-3297 [1] BEARING  
3D. 8P-9770 [1] PLATE  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D8R :

LINKAGE GP-IMPLEMENT
115-5784 LINKAGE GP-IMPLEMENT
LINK GP-STABILIZER
6I-8677 LINK GP-STABILIZER
LINK GP-STABILIZER
256-4901 LINK GP-STABILIZER
LINK GP-STABILIZER
239-3340 LINK GP-STABILIZER
LINK GP-STABILIZER
218-9950 LINK GP-STABILIZER
LINK GP-STABILIZER
158-6398 LINK GP-STABILIZER
LINK GP-STABILIZER
158-6398 LINK GP-STABILIZER
INSTALLATION AR-BULLDOZER
456-2176 INSTALLATION AR-BULLDOZER
LINKAGE GP-IMPLEMENT
6Y-3522 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
6Y-3528 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
6Y-3528 LINKAGE GP-IMPLEMENT
PUSH ARM GP
109-5147 PUSH ARM GP
PUSH ARM GP
158-6397 PUSH ARM GP
PUSH ARM GP
239-4212 PUSH ARM GP
PUSH ARM GP
239-4224 PUSH ARM GP
PUSH ARM GP
240-3395 PUSH ARM GP

Truck sale:

 
 
Caterpillar D8R
- Crawler dozers
MOHAMED ABDULRAHMAN AL-BAHAR
Caterpillar D8R, Crawler dozers, Construction
428,253 
Caterpillar D8R, Crawler dozers, Construction
- Crawler dozers
WESTRAC
Caterpillar SU BLD D8R, blades, Construction
 
Caterpillar SU BLD D8R, blades, Construction
- blades
HOLT CAT
Caterpillar D8R, Crawler dozers, Construction
 
Caterpillar D8R, Crawler dozers, Construction
- Crawler dozers
M. EZZAT JALLAD & FILS
 
384,598 
Caterpillar D8R, Crawler dozers, Construction
- Crawler dozers
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.