AIR INLET AND EXHAUST SYSTEM
MUFFLER GPTURBOCHARGER GP
FUEL SYSTEM
FILTER GP-FUELCONTROL GP-FUEL INJECTION
CONTROL GP-GOVERNOR
AIR INLET AND EXHAUST SYSTEM
MUFFLER GP
#SEBP25380100
253-4444: MUFFLER & CONVERTER
253-4444 MUFFLER & CONVERTER
S/N 8WN1-UP
610 X 546 X 265-MM, 24 X 22 X 10-IN. PROVIDE AN OPTIONAL AFTERTREATMENT CATALYST MUFFLER FOR THE 120H,135H, MOTOR GRADER
FIELD INSTALLATION
S/N 8WN1-UP
610 X 546 X 265-MM, 24 X 22 X 10-IN. PROVIDE AN OPTIONAL AFTERTREATMENT CATALYST MUFFLER FOR THE 120H,135H, MOTOR GRADER
FIELD INSTALLATION
For full view, you need register
Parts for your 135H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP25380101
7C-3707: MUFFLER & MOUNTING GP
7C-3707 MUFFLER & MOUNTING GP
S/N 8WN1-UP
PART OF 112-5819 INSTALLATION AR-ENGINE
S/N 8WN1-UP
PART OF 112-5819 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 135H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7C-3696 | [1] | BRACKET-MUFFLER (RH) | |
| 2. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 3. | 7C-3693 | [1] | MUFFLER AS | |
| 9Y-8315 | [1] | CLAMP-PIPE | ||
| 4. | 8T-6912 M | [5] | BOLT (M8X1.25X50-MM) | |
| 5. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 6. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| M | METRIC PART | |||
#SEBP25380102
115-4068: TURBOCHARGER GP
For full view, you need register
#SEBP25380103
115-5853: TURBOCHARGER GP
For full view, you need register
Parts for your 135H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7C-6671 M | [6] | BOLT AS | |
| 2. | 7C-6670 M | [4] | BOLT (M8X1.25X12.5-MM) | |
| 3. | 116-0459 | [1] | HOUSING (TURBINE) | |
| 4. | 7C-5802 | [3] | PLATE-CLAMP (COMPRESSOR) | |
| 5. | 7C-6672 | [2] | PLATE-CLAMP (TURBINE) | |
| 7. | 100-6915 Y | [1] | CARTRIDGE GP-TURBOCHARGER | |
| 8. | 100-6762 | [1] | HOUSING-COMPRESSOR | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25380104
125-1121: TURBOCHARGER GP
For full view, you need register
Parts for your 135H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7C-6671 M | [6] | BOLT AS | |
| 2. | 7C-6670 M | [4] | BOLT (M8X1.25X12.5-MM) | |
| 3. | 116-0459 | [1] | HOUSING (TURBINE) | |
| 4. | 7C-5802 | [3] | PLATE-CLAMP (COMPRESSOR)(COMPRESSOR) | |
| 5. | 7C-6672 | [2] | PLATE-CLAMP (TURBINE)(TURBINE) | |
| 7. | 124-6277 | [1] | CARTRIDGE GP-TURBOCHARGER | |
| 8. | 125-1138 | [1] | COVER-COMPRESSOR | |
| 7C-6155 F | [1] | SEAL-O-RING | ||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP25380105
126-5924: TURBOCHARGER GP
For full view, you need register
#SEBP25380106
129-1102: BASE GP-FUEL FILTER
129-1102 BASE GP-FUEL FILTER
S/N 98Z15500-UP
PART OF 130-8101 LINES GP-FUEL FILTER
S/N 98Z15500-UP
PART OF 130-8101 LINES GP-FUEL FILTER
For full view, you need register
#SEBP25380107
105-1695: CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
S/N 98Z15500-UP
PART OF 146-8346, 7E-3353 ENGINE AR
S/N 98Z15500-UP
PART OF 146-8346, 7E-3353 ENGINE AR
For full view, you need register
#SEBP25380108
8W-4743: CONTROL GP-GOVERNOR
For full view, you need register
Parts for your 135H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8D-9973 | [1] | HOUSING | |
| 2. | 9D-0145 | [1] | LEVER | |
| 3. | 8X-3123 | [1] | SHAFT | |
| 4. | 1B-8704 | [6] | KEY-WOODRUFF | |
| 5. | 9B-7237 | [2] | BOLT (3/8-16X1.25-IN) | |
| 6. | 4D-4895 | [2] | LEVER | |
| 7. | 7J-0637 | [1] | BOLT-SOCKET HEAD (1/4-20X0.375-IN) | |
| 8. | 6V-8801 | [9] | NUT (3/8-16-THD) | |
| 9. | 8X-3593 | [1] | BRACKET AS | |
| 10. | 5P-1075 | [9] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 11. | 7X-0291 | [3] | BOLT (3/8-16X3.75-IN) | |
| 12. | 8X-3124 | [1] | SHAFT | |
| 13. | 8X-3261 | [1] | LEVER | |
| 14. | 8X-2500 | [1] | PEDAL-GOVERNOR CONTROL | |
| 15. | 129-3173 | [1] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | |
| 16. | 145-9077 | [1] | ROD | |
| 17. | 009-0008 | [1] | SETSCREW-SOCKET (3/8-16X0.5-IN) | |
| 18. | 4J-8922 | [3] | ROD END (3/8-24-THD) | |
| 19. | 3S-2713 | [4] | NUT-FULL (3/8-24-THD) | |
| 20. | 1B-0676 | [3] | PIN | |
| 21. | 7V-0446 | [3] | CLIP | |
| 22. | 8X-3595 | [1] | BRACKET | |
| 23. | 5S-7379 | [2] | BOLT (3/8-16X0.875-IN) | |
| 24. | 8T-4896 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 25. | 0V-0196 | [2] | BOLT (3/8-16X1.25-IN) | |
| 26. | 8X-2955 | [1] | SHAFT | |
| 27. | 8D-5996 | [1] | LEVER | |
| 28. | 8X-2948 | [1] | LEVER | |
| 29. | 2L-7693 | [2] | BUSHING | |
| 30. | 4D-2498 | [1] | LEVER | |
| 31. | 8X-3122 | [1] | LINK AS | |
| 32. | 7H-3641 | [5] | END-ROD (5/16-24-THD) | |
| 33. | 6V-8186 | [5] | NUT-FULL (5/16-24-THD) | |
| 34. | 6V-8918 | [2] | BOLT (5/16-18X1.25-IN) | |
| 35. | 6V-8189 | [4] | NUT (5/16-18-THD) | |
| 36. | 8X-3125 | [1] | ROD | |
| 37. | 8T-4224 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 38. | 8C-6876 | [1] | BOLT (5/16-18X1.625-IN) | |
| 39. | 8T-4154 M | [1] | BOLT (M8X1.25X35-MM) | |
| 40. | 2K-2882 | [1] | BOLT-SPECIAL | |
| 41. | 2K-2773 | [1] | STUD (3/8-24X5.61-IN) | |
| 42. | 4D-4064 | [1] | ROD END (3/8-24-THD) | |
| 43. | 6H-7127 | [1] | SPACER (13/32X5/8X9/16-IN THK) | |
| 44. | 5S-7383 | [5] | BOLT (3/8-16X1.75-IN) | |
| 45. | 112-9164 | [3] | BOOT | |
| 46. | 164-3562 | [1] | CONTROL | |
| 47. | 9X-2043 M | [2] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 48. | 8X-2953 | [1] | PLATE | |
| 49. | 9M-2750 B | [2] | SCREW-HEX SOCKET (1/4-20X0.62-IN) | |
| 50. | 8X-2956 | [1] | LEVER AS | |
| 51. | 6V-1322 | [1] | BOLT (1/4-20X0.375-IN) | |
| 52. | 5M-8500 | [1] | KNOB (THROTTLE CONTROL) | |
| 53. | 8X-3121 | [1] | ROD | |
| 54. | 7M-2697 | [1] | SCREW-SOCKET (5/16-18X1-IN) | |
| 55. | 3D-9609 | [1] | ROD END | |
| 56. | 1A-2457 | [1] | PIN-CLEVIS | |
| 57. | 3B-4607 | [1] | PIN-COTTER | |
| 58. | 8X-2496 | [1] | HOUSING | |
| 59. | 8T-2604 | [1] | SEAL-LIP TYPE | |
| 60. | 4M-6425 | [2] | BOLT (5/16-18X1-IN) | |
| 61. | 2V-7859 | [1] | BEARING | |
| 62. | 8X-8299 | [1] | LEVER | |
| 63. | 9L-1566 | [1] | SUPPORT | |
| 64. | 6L-7751 | [1] | ROD END | |
| 65. | 8T-9043 | [1] | BOLT (5/16-18X0.875-IN) | |
| 66. | 8T-4205 | [10] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 67. | 5P-7704 | [1] | ROD END | |
| 68. | 8X-2952 | [1] | GASKET | |
| 69. | 8X-2954 | [1] | COVER | |
| 70. | 4M-5281 | [6] | BOLT (1/4-20X0.75-IN) | |
| 71. | 8D-9974 | [1] | GASKET | |
| 72. | 8D-9969 | [1] | COVER | |
| 73. | 4L-6454 | [7] | BOLT (3/8-16X1-IN) | |
| 74. | 1V-6341 | [2] | SEAL | |
| 75. | 6V-8187 | [2] | NUT (1/4-28-THD) | |
| 76. | 5B-1866 | [1] | PLUG-CUP | |
| 77. | 8W-8909 | [3] | SLEEVE | |
| 78. | 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | |
| 79. | 6D-4972 | [1] | SPACER (0.344X0.625X0.5-IN THK) | |
| 80. | 6V-8185 | [2] | NUT (1/4-20-THD) | |
| 81. | 9G-9154 | [2] | CLIP | |
| 82. | 8W-6431 | [1] | PLATE AS | |
| 83. | 5C-7423 M | [1] | SCREW (M6X1X16-MM) | |
| 84. | 8W-6433 | [1] | SHAFT AS | |
| 85. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 86. | 8X-2947 | [1] | PEDAL AS-DECELERATOR | |
| 87. | 8C-9587 | [1] | CABLE AS | |
| 6F-0253 | [4] | LOCKWASHER | ||
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 9S-1354 | [4] | NUT (5/8-18-THD) | ||
| 88. | 8T-8908 | [1] | BOLT (1/4-20X1-IN) | |
| 89. | 7K-2135 | [4] | BEARING-ROLLER | |
| 90. | 6B-4196 | [1] | WASHER-THRUST (16.25X26.97X2.36-MM THK) | |
| 91. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| 92. | 5P-1076 | [1] | WASHER-HARD (13.5X30X4-MM THK) | |
| 93. | 2N-9421 | [2] | SPRING-DISC | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP25380109
8W-4743: CONTROL GP-GOVERNOR
For full view, you need register
Parts for your 135H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8D-9973 | [1] | HOUSING | |
| 2. | 9D-0145 | [1] | LEVER | |
| 3. | 8X-3123 | [1] | SHAFT | |
| 4. | 1B-8704 | [6] | KEY-WOODRUFF | |
| 5. | 9B-7237 | [2] | BOLT (3/8-16X1.25-IN) | |
| 6. | 4D-4895 | [2] | LEVER | |
| 7. | 8H-0708 | [1] | BOLT (1/4-20X0.5-IN) | |
| 8. | 6V-8801 | [9] | NUT (3/8-16-THD) | |
| 9. | 8X-3593 | [1] | BRACKET AS | |
| 10. | 5P-1075 | [9] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 11. | 7X-0291 | [3] | BOLT (3/8-16X3.75-IN) | |
| 12. | 8X-3124 | [1] | SHAFT | |
| 13. | 8X-3261 | [1] | LEVER | |
| 14. | 207-4927 | [1] | PEDAL-GOVERNOR CONTROL | |
| 15. | 129-3173 | [1] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | |
| 16. | 169-0921 C | [1] | ROD END (3/8-24 LH-THD) | |
| 17. | 009-0008 | [1] | SETSCREW-SOCKET (3/8-16X0.5-IN) | |
| 18. | 4J-8922 | [2] | ROD END (3/8-24-THD) | |
| 19. | 3S-2713 | [3] | NUT-FULL (3/8-24-THD) | |
| 20. | 1B-0676 | [3] | PIN | |
| 21. | 7V-0446 | [3] | CLIP | |
| 22. | 8X-3595 | [1] | BRACKET | |
| 23. | 5S-7379 | [2] | BOLT (3/8-16X0.875-IN) | |
| 24. | 8T-4896 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 25. | 0V-0196 | [2] | BOLT (3/8-16X1.25-IN) | |
| 26. | 8X-2955 | [1] | SHAFT | |
| 27. | 8D-5996 | [1] | LEVER | |
| 28. | 8X-2948 | [1] | LEVER | |
| 29. | 2L-7693 | [2] | BUSHING | |
| 30. | 4D-2498 | [1] | LEVER | |
| 31. | 8X-3122 | [1] | LINK AS | |
| 32. | 7H-3641 | [5] | END-ROD (5/16-24-THD) | |
| 33. | 6V-8186 | [5] | NUT-FULL (5/16-24-THD) | |
| 34. | 6V-8918 | [2] | BOLT (5/16-18X1.25-IN) | |
| 35. | 6V-8189 | [4] | NUT (5/16-18-THD) | |
| 36. | 8X-3125 | [1] | ROD | |
| 37. | 8T-4224 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 38. | 8C-6876 | [1] | BOLT (5/16-18X1.625-IN) | |
| 39. | 8T-4154 M | [1] | BOLT (M8X1.25X35-MM) | |
| 40. | 2K-2882 | [1] | BOLT-SPECIAL | |
| 41. | 2K-2773 | [1] | STUD (3/8-24X5.61-IN) | |
| 42. | 4D-4064 | [1] | ROD END (3/8-24-THD) | |
| 43. | 6H-7127 | [1] | SPACER (13/32X5/8X9/16-IN THK) | |
| 44. | 5S-7383 | [5] | BOLT (3/8-16X1.75-IN) | |
| 45. | 112-9164 | [3] | BOOT | |
| 46. | 164-3562 | [1] | CONTROL | |
| 47. | 9X-2043 M | [2] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 48. | 8X-2953 | [1] | PLATE | |
| 49. | 9M-2750 | [2] | SCREW-HEX SOCKET (1/4-20X0.62-IN) | |
| 50. | 8X-2956 | [1] | LEVER AS | |
| 51. | 6V-1322 | [1] | BOLT (1/4-20X0.375-IN) | |
| 52. | 5M-8500 | [1] | KNOB (GOVERNOR CONTROL) | |
| 53. | 8X-3121 | [1] | ROD | |
| 54. | 7M-2697 | [1] | SCREW-SOCKET (5/16-18X1-IN) | |
| 55. | 3D-9609 | [1] | ROD END | |
| 56. | 1A-2457 | [1] | PIN-CLEVIS | |
| 57. | 3B-4607 | [1] | PIN-COTTER | |
| 58. | 8X-2496 | [1] | HOUSING | |
| 59. | 8T-2604 | [1] | SEAL-LIP TYPE | |
| 60. | 4M-6425 | [2] | BOLT (5/16-18X1-IN) | |
| 61. | 2V-7859 | [1] | BEARING | |
| 62. | 8X-8299 | [1] | LEVER | |
| 63. | 9L-1566 | [1] | SUPPORT | |
| 64. | 6L-7751 | [1] | ROD END | |
| 65. | 8T-9043 | [1] | BOLT (5/16-18X0.875-IN) | |
| 66. | 8T-4205 | [10] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 67. | 5P-7704 | [1] | ROD END | |
| 68. | 8X-2952 | [1] | GASKET | |
| 69. | 8X-2954 | [1] | COVER | |
| 70. | 4M-5281 | [6] | BOLT (1/4-20X0.75-IN) | |
| 71. | 8D-9974 | [1] | GASKET | |
| 72. | 8D-9969 | [1] | COVER | |
| 73. | 4L-6454 | [7] | BOLT (3/8-16X1-IN) | |
| 74. | 1V-6341 | [2] | SEAL (30.15MM OD) | |
| 75. | 6V-8187 | [2] | NUT (1/4-28-THD) | |
| 76. | 5B-1866 | [1] | PLUG-CUP | |
| 77. | 8W-8909 | [3] | SLEEVE | |
| 78. | 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | |
| 79. | 6D-4972 | [1] | SPACER (0.344X0.625X0.5-IN THK) | |
| 80. | 6V-8185 | [2] | NUT (1/4-20-THD) | |
| 81. | 9G-9154 | [2] | CLIP | |
| 82. | 8W-6431 | [1] | PLATE AS | |
| 83. | 5C-7423 M | [1] | SCREW (M6X1X16-MM) | |
| 84. | 8W-6433 | [1] | SHAFT AS | |
| 85. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 86. | 8X-2947 | [1] | PEDAL AS-DECELERATOR | |
| 87. | 8C-9587 | [1] | CABLE AS | |
| 6F-0253 | [4] | LOCKWASHER | ||
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 9S-1354 | [4] | NUT (5/8-18-THD) | ||
| 88. | 8T-8908 | [1] | BOLT (1/4-20X1-IN) | |
| 89. | 7K-2135 | [4] | BEARING-ROLLER | |
| 90. | 6B-4196 | [1] | WASHER-THRUST (16.25X26.97X2.36-MM THK) | |
| 91. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| 92. | 5P-1076 | [1] | WASHER-HARD (13.5X30X4-MM THK) | |
| 93. | 2N-9421 B | [2] | SPRING-DISC | |
| 94. | 169-0922 C | [1] | ROD | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
