8X-6080 SCARIFIER GP -VEE TYPE S/N 8WN1-UP PART OF 108-1104 SCARIFIER AR Type 1 AN ATTACHMENT 135H MOTOR GRADER

WORK TOOLS

SCARIFIER GP

0. 8X-6080 SCARIFIER
1. 8X-6080 SCARIFIER

GROUND ENGAGING TOOLS (G.E.T.)

2. 8J-5313 TOOTH GP-R

SERVICE EQUIPMENT AND SUPPLIES

BOX GP-TOOL

3. 111-1719 BOX GP-TOO

CHARTS & FILMS

4. 116-0026 FILM GP

TOOLS

5. 8T-5255 JACK-HYDRA

GASKET & SEAL KITS

6. 250-9214 KIT-GASKET
7. 281-8870 KIT-GASKET
8. 287-8470 KIT-GASKET
9. 437-8123 KIT-GASKET
0. INFORMATION

MOTOR GRADER 135H MOTOR GRADER 8WN
135H Motor Grader 8WN00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2538 135H 8WN (1996)

WORK TOOLS

SCARIFIER GP

116-0379 BRACKET GP-SCARIFIER

108-1104 SCARIFIER AR

8X-6080 SCARIFIER GP

#SEBP25380740

8X-6080: SCARIFIER GP

SCARIFIER GP

8X-6080 SCARIFIER GP -VEE TYPE
S/N 8WN1-UP
PART OF 108-1104 SCARIFIER AR
Type 1
AN ATTACHMENT

i00125537 SEBP2538

For full view, you need register

Parts for your 135H MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	1A-0224	[2]	BOLT (7/8-14X3.5-IN)
2.	1B-4208	[2]	NUT-FULL (7/8-14-THD)
3.	2G-4332	[1]	BLOCK AS-SCARIFIER
	7D-8825	[11]	SPACER
	7D-8826	[11]	SPACER
4.	2H-3746	[4]	BOLT (1-14X5-IN)
5.	2K-7471	[4]	LOCKNUT (1-14-THD)
6.	3B-8489	[4]	FITTING-GREASE (1/8-27 PTF)(SCARIFIER)
7.	3D-4904	[4]	LOCKNUT (1-1/8-12-THD)
8.	4D-6086	[2]	KEY
9.	5B-0577	[2]	COLLAR
10.	5D-8159	[2]	PIN AS
11.	5K-1458	[11]	GROMMET
12.	5K-1459	[11]	LOCK PIN
13.	6B-3260	[1]	TOOL
14.	6F-6992	[4]	CAP-BALL SOCKET
15.	6Y-5230	[11]	TOOTH-SCARIFIER
16.	7D-2196	[2]	SLEEVE AS-LINK
			(EACH INCLUDES)
	7D-2136	[1]	SOCKET-BALL
17.	7F-1327 B	[32]	SHIM (0.03-IN THK)
18.	8D-1268	[2]	ARM AS-LIFT
			(EACH INCLUDES)
	7D-8245	[1]	STUD-BALL
19.	8H-4040	[4]	BOLT (1-1/8-12X4.5-IN)
20.	8W-0663	[2]	BRACKET AS
			(EACH INCLUDES)
	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)(SCARIFIER)
	107-8374	[2]	BEARING
21.	8X-6075	[1]	BOLSTER AS
22.	9D-5516	[2]	LINK AS-LIFT
			(EACH INCLUDES)
	7D-2135	[1]	SOCKET-BALL
23.	107-8375	[1]	SHAFT AS
24.	118-7880	[1]	DRAWBAR AS
	8W-5597	[1]	STUD-BALL
	2G-7728	[2]	COLLAR
25.	118-7881	[1]	DRAWBAR AS
	8W-5597	[1]	STUD-BALL
	2G-7728	[2]	COLLAR
26.	195-7218	[11]	SHANK
27.	198-9811 B	[4]	SPACER (83X145X3-MM THK)
28.	198-9812 B	[2]	SPACER (83X145X2-MM THK)
29.	1A-8063	[8]	BOLT (3/4-10X2.5-IN)
30.	1D-4612	[4]	BOLT (3/4-10X4-IN)
31.	1F-7958	[2]	NUT-FULL (1/2-13-THD)
32.	2G-7309	[1]	SHAFT
33.	2J-3506	[4]	NUT-FULL (3/4-10-THD)
34.	3S-1349	[4]	WASHER-HARD (31X52.5X6-MM THK)
35.	5D-8161	[2]	PIN
36.	5P-8245	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
37.	5P-8248	[8]	WASHER-HARD (20X36.5X3.5-MM THK)
38.	5P-8250	[8]	WASHER (28X49X5-MM THK)
39.	6K-0545	[4]	LOCKNUT (7/8-9-THD)
40.	7X-0390	[4]	BOLT (7/8-9X5-IN)
41.	8C-6913	[4]	WASHER-HARD (24X41.5X4-MM THK)
42.	8X-3663	[8]	WASHER (20X45X12-MM THK)
43.	9X-8875	[2]	BOLT (1/2-13X3.5-IN)
	B		USE AS REQUIRED

#SEBP25380741

8X-6080: SCARIFIER GP

SCARIFIER GP

8X-6080 SCARIFIER GP -VEE TYPE
S/N 8WN1-UP
PART OF 108-1104 SCARIFIER AR
Type 2
AN ATTACHMENT

i04555447 SEBP2538

For full view, you need register

Parts for your 135H MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	1A-0224	[2]	BOLT (7/8-14X3.5-IN)
2.	1B-4208	[2]	NUT-FULL (7/8-14-THD)
3.	2G-4332	[1]	BLOCK AS-SCARIFIER
	7D-8825	[11]	SPACER
	7D-8826	[11]	SPACER
4.	2H-3746	[4]	BOLT (1-14X5-IN)
5.	2K-7471	[4]	LOCKNUT (1-14-THD)
6.	3B-8489	[4]	FITTING-GREASE (1/8-27 PTF)(SCARIFIER)
7.	3D-4904	[4]	LOCKNUT (1-1/8-12-THD)
8.	4D-6086	[2]	KEY
9.	5B-0577	[2]	COLLAR
10.	5D-8159	[2]	PIN AS
11.	5K-1458	[11]	GROMMET
12.	5K-1459	[11]	LOCK PIN
13.	6B-3260	[1]	TOOL
14.	6F-6992	[4]	CAP-BALL SOCKET
15.	6Y-5230	[11]	TOOTH-SCARIFIER
16.	7D-2196	[2]	SLEEVE AS-LINK
			(EACH INCLUDES)
	7D-2136	[1]	SOCKET-BALL
17.	7F-1327 B	[32]	SHIM (0.03-IN THK)
18.	8D-1268	[2]	ARM AS-LIFT
			(EACH INCLUDES)
	7D-8245	[1]	STUD-BALL
19.	8H-4040	[4]	BOLT (1-1/8-12X4.5-IN)
20.	8W-0663	[2]	BRACKET AS
			(EACH INCLUDES)
	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)(SCARIFIER)
	107-8374	[2]	BEARING
21.	8X-6075	[1]	BOLSTER AS
22.	9D-5516	[2]	LINK AS-LIFT
			(EACH INCLUDES)
	7D-2135	[1]	SOCKET-BALL
23.	107-8375	[1]	SHAFT AS
24.	118-7880	[1]	DRAWBAR AS
	8W-5597	[1]	STUD-BALL
	2G-7728	[2]	COLLAR
25.	118-7881	[1]	DRAWBAR AS
	8W-5597	[1]	STUD-BALL
	2G-7728	[2]	COLLAR
26.	195-7218	[11]	SHANK
27.	198-9811 B	[4]	SPACER (83X145X3-MM THK)
28.	198-9812 B	[2]	SPACER (83X145X2-MM THK)
29.	1A-8063	[8]	BOLT (3/4-10X2.5-IN)
30.	1D-4612	[4]	BOLT (3/4-10X4-IN)
31.	1F-7958	[2]	NUT-FULL (1/2-13-THD)
32.	330-6877	[1]	SHAFT
33.	2J-3506	[4]	NUT-FULL (3/4-10-THD)
34.	3S-1349	[4]	WASHER-HARD (31X52.5X6-MM THK)
35.	5D-8161	[2]	PIN
36.	5P-8245	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
37.	5P-8248	[8]	WASHER-HARD (20X36.5X3.5-MM THK)
38.	5P-8250	[8]	WASHER (28X49X5-MM THK)
39.	6K-0545	[4]	LOCKNUT (7/8-9-THD)
40.	7X-0390	[4]	BOLT (7/8-9X5-IN)
41.	8C-6913	[4]	WASHER-HARD (24X41.5X4-MM THK)
42.	8X-3663	[8]	WASHER (20X45X12-MM THK)
43.	9X-8875	[2]	BOLT (1/2-13X3.5-IN)
	B		USE AS REQUIRED

#SEBP25380742

8J-5313: TOOTH GP-RIPPER

TOOTH GP-RIPPER

8J-5313 TOOTH GP-RIPPER
S/N 8WN1-UP
PART OF 124-9782 RIPPER GP
AN ATTACHMENT

i00125369 SEBP2538

For full view, you need register

Parts for your 135H MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	6B-5464	[1]	PIN
2.	8J-5299	[1]	SHANK-RIPPER
3.	8E-6208 C	[1]	PIN
	8E-6209 C	[1]	RETAINER AS
4.	1U-3202 C	[1]	TIP-LONG
5.	3B-4632	[2]	PIN-COTTER
	C		CHANGE FROM PREVIOUS TYPE

#SEBP25380743

111-1719: BOX GP-TOOL

BOX GP-TOOL

111-1719 BOX GP-TOOL
S/N 8WN1-UP
PART OF 112-4110 CHASSIS AR

i00125724 SEBP2538

For full view, you need register

Parts for your 135H MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	129-7249	[1]	TOOL BOX
2.	246-2641	[1]	PADLOCK GP (TOOL BOX)
	5P-8500	[1]	KEY
3.	5K-9107	[4]	BOLT-LOCKING (3/8-16X0.75-IN)
4.	5P-1075	[4]	WASHER-HARD (10.2X22.5X3-MM THK)

#SEBP25380744

116-0026: FILM GP

FILM GP

116-0026 FILM GP
S/N 8WN1-UP
PART OF 115-9843 PLATE & FILM GP

i00125905 SEBP2538

For full view, you need register

Parts for your 135H MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	9X-2447	[1]	FILM-INFORMATION (CATERPILLAR)
2.		[2]	FILM-IDENTIFICATION (135H)
3.	302-1328	[1]	FILM (CAT, LH)
4.	302-1329	[1]	FILM (CAT, RH)

#SEBP25380745

8T-5255: JACK-HYDRAULIC

JACK-HYDRAULIC

8T-5255 JACK-HYDRAULIC
S/N 8WN1-UP
AN ATTACHMENT

i00583879 SEBP2538

For full view, you need register

Parts for your 135H MOTOR GRADER:

Pos.	Part No	Qty	Parts name	Comments
			(NO SERVICED PARTS)

#SEBP25380746

250-9214: KIT-GASKET

KIT-GASKET

250-9214 KIT-GASKET -OIL COOLER, LINES
S/N 8WN1-UP
KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES.
FIELD INSTALLATION

i05963331 SEBP2538

For full view, you need register

Parts for your 135H MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	2M-9780	[2]	SEAL-O-RING
2.	3D-2824	[1]	SEAL-O-RING
3.	3J-1907	[2]	SEAL-O-RING
4.	3J-7354	[1]	SEAL-O-RING
5.	3P-1156	[2]	SEAL-O-RING
6.	4F-9653	[1]	SEAL-O-RING
7.	4K-1388	[2]	SEAL-O-RING
8.	5F-9657	[6]	SEAL-O-RING
9.	5K-9090	[3]	SEAL-O-RING
10.	7C-7490	[1]	GASKET
11.	8M-4987	[1]	SEAL-O-RING
12.	233-7654	[1]	GASKET (ENGINE OIL FILTER BASE)
13.	233-7655	[1]	GASKET

			FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

			HTTP://DEALER.CAT.COM/RELATED

#SEBP25380747

281-8870: KIT-GASKET

KIT-GASKET

281-8870 KIT-GASKET
S/N 8WN1-UP
KIT CONTAINS SEALS, (EXCEPT METAL SEALS RINGS), GASKETS AND BENDABLE LOCKS TO RESEAL THE COMPLETE POWER SHIFT. TRANSMISSION ARRANGEMENT. IT ALSO CONTAINS SEALS AND GASKETS TO ATTACH VALVES, FILL TUBE AND DIPSTICK THAT ARE REMOVED. WITH THE TRANSMISSION. KIT CONTAINS TRANSMISSION SEALS AND GASKET
FOR USE WITH @@@@@ 9W-5126@@@@@, @@@@@144-2232@@@@@
FIELD INSTALLATION

i06249969 SEBP2538

For full view, you need register

Parts for your 135H MOTOR GRADER:

Part No	Qty	Parts name
8B-1615	[1]	GASKET
476-2738	[8]	KIT-SEAL
		(EACH INCLUDES)
8L-2786	[1]	SEAL-O-RING
317-0808	[1]	SEAL-O-RING
464-0509	[1]	SEAL-O-RING
145-8039	[3]	LOCK
265-5287	[1]	RING-SEAL
7G-4822	[12]	RING-SEAL
8E-5742	[8]	RING-SEAL (INTERNAL)
9W-9371	[3]	RING-SEAL
8E-5734	[4]	RING-SEAL EXTENSION
8E-5736	[2]	RING-SEAL EXTENSION
203-5957	[1]	SEAL
203-5958	[1]	SEAL
278-0642	[1]	SEAL-LIP TYPE
9X-7743	[1]	SEAL-LIP TYPE
2D-8009	[3]	SEAL-O-RING
2J-0157	[1]	SEAL-O-RING
2J-6274	[1]	SEAL-O-RING
2M-9780	[7]	SEAL-O-RING
3D-4245	[8]	SEAL-O-RING
3J-1907	[15]	SEAL-O-RING
3J-7354	[3]	SEAL-O-RING
3K-0360	[7]	SEAL-O-RING
4D-6695	[4]	SEAL-O-RING
4F-7390	[1]	SEAL-O-RING
4F-7952	[1]	SEAL-O-RING
4H-9105	[1]	SEAL-O-RING
4J-2506	[2]	SEAL-O-RING
4J-7533	[8]	SEAL-O-RING
4K-2039	[9]	SEAL-O-RING
4S-5879	[1]	SEAL-O-RING
5F-8000	[1]	SEAL-O-RING
5F-9144	[9]	SEAL-O-RING
5J-1086	[1]	SEAL-O-RING
5M-6200	[1]	SEAL-O-RING
5P-3863	[6]	SEAL-O-RING
6F-4855	[8]	SEAL-O-RING
6L-1650	[1]	SEAL-O-RING
7F-8268	[1]	SEAL-O-RING
7M-8485	[16]	SEAL-O-RING
8F-3469	[14]	SEAL-O-RING
8F-6230	[1]	SEAL-O-RING
8M-4992	[1]	SEAL-O-RING
9X-4609	[2]	SEAL-O-RING
118-5068	[1]	SEAL-O-RING
228-7467	[1]	SEAL-WIPER
6Y-5010	[8]	WASHER (10.16X19X0.84-MM THK)
9P-9150	[70]	WASHER (8.25X18X0.84-MM THK)

#SEBP25380748

287-8470: KIT-GASKET

KIT-GASKET

287-8470 KIT-GASKET -FRONT STRUCTURE
S/N 98Z15500-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FIELD REPLACEMENT ORDER @@@@@469-0103@@@@@
FOR USE WITH @@@@@146-8346@@@@@
FIELD INSTALLATION

i05979671 SEBP2538

For full view, you need register

Parts for your 135H MOTOR GRADER:

Part No	Qty	Parts name
7W-6552	[1]	GASKET
245-7339	[1]	SEAL-CRANKSHAFT (FRONT)
1T-1068	[1]	SEAL-O-RING
2M-4453	[1]	SEAL-O-RING
3D-2824	[2]	SEAL-O-RING
3K-0360	[2]	SEAL-O-RING
7F-8267	[1]	SEAL-O-RING
117-1385	[2]	SEAL-O-RING