8W-4743 CONTROL GP-GOVERNOR S/N 5FM1-1841 PART OF 112-4103 CHASSIS AR 120H MOTOR GRADER



FUEL SYSTEM
CONTROL GP-GOVERNOR
GOVERNOR GP
PUMP GP-FUEL INJECTION
GOVERNOR GP

MOTOR GRADER 120H MOTOR GRADER 5FM
 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2539 120H 5FM   (1996)

FUEL SYSTEM

CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
8W-4743 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
8W-4743 CONTROL GP-GOVERNOR
 

#SEBP25390110
 

8W-4743: CONTROL GP-GOVERNOR

8W-4743 CONTROL GP-GOVERNOR
S/N 5FM1-1841
PART OF 112-4103 CHASSIS AR
i00125396 SEBP2539
8W4743 CONTROL GP-GOVERNOR Parts scheme 8W4743 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 9D-0145 [1] LEVER  
3. 8X-3123 [1] SHAFT  
4. 1B-8704 [6] KEY-WOODRUFF  
5. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
6. 4D-4895 [2] LEVER  
7. 7J-0637 [1] BOLT-SOCKET HEAD (1/4-20X0.375-IN)  
8. 6V-8801 [9] NUT (3/8-16-THD)  
9. 8X-3593 [1] BRACKET AS  
10. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 8X-3124 [1] SHAFT  
13. 8X-3261 [1] LEVER  
14. 8X-2500 [1] PEDAL-GOVERNOR CONTROL  
15. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
16. 145-9077 [1] ROD  
17. 009-0008 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
18. 4J-8922 [3] ROD END (3/8-24-THD)  
19. 3S-2713 [4] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [3] PIN  
21. 7V-0446 [3] CLIP  
22. 8X-3595 [1] BRACKET  
23. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
24. 8T-4896 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
25. 0V-0196 [2] BOLT (3/8-16X1.25-IN)  
26. 8X-2955 [1] SHAFT  
27. 8D-5996 [1] LEVER  
28. 8X-2948 [1] LEVER  
29. 2L-7693 [2] BUSHING  
30. 4D-2498 [1] LEVER  
31. 8X-3122 [1] LINK AS  
32. 7H-3641 [5] END-ROD (5/16-24-THD)  
33. 6V-8186 [5] NUT-FULL (5/16-24-THD)  
34. 6V-8918 [2] BOLT (5/16-18X1.25-IN)  
35. 6V-8189 [4] NUT (5/16-18-THD)  
36. 8X-3125 [1] ROD  
37. 8T-4224 [7] WASHER-HARD (8.8X16X2-MM THK)  
38. 8C-6876 [1] BOLT (5/16-18X1.625-IN)  
39. 8T-4154 M [1] BOLT (M8X1.25X35-MM)  
40. 2K-2882 [1] BOLT-SPECIAL  
41. 2K-2773 [1] STUD (3/8-24X5.61-IN)  
42. 4D-4064 [1] ROD END (3/8-24-THD)  
43. 6H-7127 [1] SPACER (13/32X5/8X9/16-IN THK)  
44. 5S-7383 [5] BOLT (3/8-16X1.75-IN)  
45. 112-9164 [3] BOOT  
46. 164-3562 [1] CONTROL  
47. 9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
48. 8X-2953 [1] PLATE  
49. 9M-2750 B [2] SCREW-HEX SOCKET (1/4-20X0.62-IN)  
50. 8X-2956 [1] LEVER AS  
51. 6V-1322 [1] BOLT (1/4-20X0.375-IN)  
52. 5M-8500 [1] KNOB (THROTTLE CONTROL)  
53. 8X-3121 [1] ROD  
54. 7M-2697 [1] SCREW-SOCKET (5/16-18X1-IN)  
55. 3D-9609 [1] ROD END  
56. 1A-2457 [1] PIN-CLEVIS  
57. 3B-4607 [1] PIN-COTTER  
58. 8X-2496 [1] HOUSING  
59. 8T-2604 [1] SEAL-LIP TYPE  
60. 4M-6425 [2] BOLT (5/16-18X1-IN)  
61. 2V-7859 [1] BEARING  
62. 8X-8299 [1] LEVER  
63. 9L-1566 [1] SUPPORT  
64. 6L-7751 [1] ROD END  
65. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
66. 8T-4205 [10] WASHER-HARD (7.2X14.5X2-MM THK)  
67. 5P-7704 [1] ROD END  
68. 8X-2952 [1] GASKET  
69. 8X-2954 [1] COVER  
70. 4M-5281 [6] BOLT (1/4-20X0.75-IN)  
71. 8D-9974 [1] GASKET  
72. 8D-9969 [1] COVER  
73. 4L-6454 [7] BOLT (3/8-16X1-IN)  
74. 1V-6341 [2] SEAL  
75. 6V-8187 [2] NUT (1/4-28-THD)  
76. 5B-1866 [1] PLUG-CUP  
77. 8W-8909 [3] SLEEVE  
78. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
79. 6D-4972 [1] SPACER (0.344X0.625X0.5-IN THK)  
80. 6V-8185 [2] NUT (1/4-20-THD)  
81. 9G-9154 [2] CLIP  
82. 8W-6431 [1] PLATE AS  
83. 5C-7423 M [1] SCREW (M6X1X16-MM)  
84. 8W-6433 [1] SHAFT AS  
85. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
86. 8X-2947 [1] PEDAL AS-DECELERATOR  
87. 8C-9587 [1] CABLE AS  
  6F-0253 [4] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  9S-1354 [4] NUT (5/8-18-THD)  
88. 8T-8908 [1] BOLT (1/4-20X1-IN)  
89. 7K-2135 [4] BEARING-ROLLER  
90. 6B-4196 [1] WASHER-THRUST (16.25X26.97X2.36-MM THK)  
91. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
92. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
93. 2N-9421 [2] SPRING-DISC  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP25390111
 

8W-4743: CONTROL GP-GOVERNOR

8W-4743 CONTROL GP-GOVERNOR
S/N 5FM1842-UP
PART OF 112-4103 CHASSIS AR
i01315773 SEBP2539
8W4743 CONTROL GP-GOVERNOR Parts scheme 8W4743 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 9D-0145 [1] LEVER  
3. 8X-3123 [1] SHAFT  
4. 1B-8704 [6] KEY-WOODRUFF  
5. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
6. 4D-4895 [2] LEVER  
7. 8H-0708 [1] BOLT (1/4-20X0.5-IN)  
8. 6V-8801 [9] NUT (3/8-16-THD)  
9. 8X-3593 [1] BRACKET AS  
10. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 8X-3124 [1] SHAFT  
13. 8X-3261 [1] LEVER  
14. 207-4927 [1] PEDAL-GOVERNOR CONTROL  
15. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
16. 169-0921 C [1] ROD END (3/8-24 LH-THD)  
17. 009-0008 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
18. 4J-8922 [2] ROD END (3/8-24-THD)  
19. 3S-2713 [3] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [3] PIN  
21. 7V-0446 [3] CLIP  
22. 8X-3595 [1] BRACKET  
23. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
24. 8T-4896 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
25. 0V-0196 [2] BOLT (3/8-16X1.25-IN)  
26. 8X-2955 [1] SHAFT  
27. 8D-5996 [1] LEVER  
28. 8X-2948 [1] LEVER  
29. 2L-7693 [2] BUSHING  
30. 4D-2498 [1] LEVER  
31. 8X-3122 [1] LINK AS  
32. 7H-3641 [5] END-ROD (5/16-24-THD)  
33. 6V-8186 [5] NUT-FULL (5/16-24-THD)  
34. 6V-8918 [2] BOLT (5/16-18X1.25-IN)  
35. 6V-8189 [4] NUT (5/16-18-THD)  
36. 8X-3125 [1] ROD  
37. 8T-4224 [7] WASHER-HARD (8.8X16X2-MM THK)  
38. 8C-6876 [1] BOLT (5/16-18X1.625-IN)  
39. 8T-4154 M [1] BOLT (M8X1.25X35-MM)  
40. 2K-2882 [1] BOLT-SPECIAL  
41. 2K-2773 [1] STUD (3/8-24X5.61-IN)  
42. 4D-4064 [1] ROD END (3/8-24-THD)  
43. 6H-7127 [1] SPACER (13/32X5/8X9/16-IN THK)  
44. 5S-7383 [5] BOLT (3/8-16X1.75-IN)  
45. 112-9164 [3] BOOT  
46. 164-3562 [1] CONTROL  
47. 9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
48. 8X-2953 [1] PLATE  
49. 9M-2750 [2] SCREW-HEX SOCKET (1/4-20X0.62-IN)  
50. 8X-2956 [1] LEVER AS  
51. 6V-1322 [1] BOLT (1/4-20X0.375-IN)  
52. 5M-8500 [1] KNOB (GOVERNOR CONTROL)  
53. 8X-3121 [1] ROD  
54. 7M-2697 [1] SCREW-SOCKET (5/16-18X1-IN)  
55. 3D-9609 [1] ROD END  
56. 1A-2457 [1] PIN-CLEVIS  
57. 3B-4607 [1] PIN-COTTER  
58. 8X-2496 [1] HOUSING  
59. 8T-2604 [1] SEAL-LIP TYPE  
60. 4M-6425 [2] BOLT (5/16-18X1-IN)  
61. 2V-7859 [1] BEARING  
62. 8X-8299 [1] LEVER  
63. 9L-1566 [1] SUPPORT  
64. 6L-7751 [1] ROD END  
65. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
66. 8T-4205 [10] WASHER-HARD (7.2X14.5X2-MM THK)  
67. 5P-7704 [1] ROD END  
68. 8X-2952 [1] GASKET  
69. 8X-2954 [1] COVER  
70. 4M-5281 [6] BOLT (1/4-20X0.75-IN)  
71. 8D-9974 [1] GASKET  
72. 8D-9969 [1] COVER  
73. 4L-6454 [7] BOLT (3/8-16X1-IN)  
74. 1V-6341 [2] SEAL (30.15MM OD)  
75. 6V-8187 [2] NUT (1/4-28-THD)  
76. 5B-1866 [1] PLUG-CUP  
77. 8W-8909 [3] SLEEVE  
78. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
79. 6D-4972 [1] SPACER (0.344X0.625X0.5-IN THK)  
80. 6V-8185 [2] NUT (1/4-20-THD)  
81. 9G-9154 [2] CLIP  
82. 8W-6431 [1] PLATE AS  
83. 5C-7423 M [1] SCREW (M6X1X16-MM)  
84. 8W-6433 [1] SHAFT AS  
85. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
86. 8X-2947 [1] PEDAL AS-DECELERATOR  
87. 8C-9587 [1] CABLE AS  
  6F-0253 [4] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  9S-1354 [4] NUT (5/8-18-THD)  
88. 8T-8908 [1] BOLT (1/4-20X1-IN)  
89. 7K-2135 [4] BEARING-ROLLER  
90. 6B-4196 [1] WASHER-THRUST (16.25X26.97X2.36-MM THK)  
91. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
92. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
93. 2N-9421 B [2] SPRING-DISC  
94. 169-0922 C [1] ROD  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP25390112
 

7E-8794: DRIVE GP-GOV & TRANSFER PUMP

7E-8794 DRIVE GP-GOV & TRANSFER PUMP
S/N 4TF48881-UP; 98Z15500-UP
PART OF 131-6690, 142-5052 GOVERNOR GP-UNIT INJECTOR
i00125332 SEBP2539
7E8794 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 4P-5612 [1] HOUSING AS-FRONT  
  7S-5005 [2] DOWEL  
  7S-6798 [1] SEAL-LIP TYPE  
  9Y-3107 M [1] BOLT (M8X1.25X45-MM)  
2. [1] SPRING-TORSION  
3. 4P-9490 [1] SHAFT AS-SHUTOFF  
3A. 9X-8902 M [4] BOLT-SOCKET HEAD (M3X0.5X8-MM)  
3B. 4P-9492 [1] BRACKET-SHAFT  
3C. 4P-9493 [1] LEVER-SHUTOFF (SOLENOID)  
3D. 4P-9494 [1] SPRING-SHUTOFF  
3E. 105-0585 [1] LEVER-SHUTOFF (OUTPUT)  
4. 6V-5213 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
5. 7W-5615 [1] SLEEVE AS-PUMP  
  1W-0565 [1] RING-RETAINING  
6. 4D-9986 [2] SEAL-O-RING  
7. 4P-3953 [1] PISTON AS  
8. 7E-0156 [1] FITTING-INLET  
9. 4P-4224 [1] COVER-TRANSFER PUMP  
10. 7C-5294 [1] SPRING  
11. 8C-6364 M [3] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
12. 7E-9898 [1] CONNECTOR  
13. 3J-1907 [2] SEAL-O-RING  
14. 7W-7383 [2] VALVE AS-CHECK  
15. 7E-3943 [1] LEVER-CONTROL  
16. 9Y-9846 M [1] SCREW-LOCATOR  
17. 6L-8598 [2] RING-RETAINING  
18. 4P-3538 [1] SHAFT-THROTTLE  
19. 7E-3944 [1] SLEEVE  
  M   METRIC PART
 

#SEBP25390113
 

126-5929: FASTENER GP-FUEL INJ PUMP

126-5929 FASTENER GP-FUEL INJ PUMP
S/N 4TF48881-UP; 98Z15500-UP
PART OF 126-0468, 140-7377 GOVERNOR GP-UNIT INJECTOR
i00126173 SEBP2539
1265929 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 7W-3872 [1] SLEEVE  
2. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
3. 6V-5218 M [3] BOLT (M8X1.25X35-MM)  
4. 9Y-5295 [1] TUBE  
5. 6F-6673 [1] SEAL-O-RING  
6. 7C-3839 [1] CLIP-SPRING  
7. 7E-0844 [1] SEAL  
8. 1T-1068 [1] SEAL-O-RING  
9. 116-0118 [1] CLIP  
10. 5C-9553 M [1] BOLT (M6X1X16-MM)  
11. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
  M   METRIC PART
 

#SEBP25390114
 

126-0468: GOVERNOR GP-UNIT INJECTOR

126-0468 GOVERNOR GP-UNIT INJECTOR
S/N 98Z15500-22642
PART OF 7E-3352 ENGINE AR
i00126161 SEBP2539
  For full view, you need register

Parts for your 120H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
  126-5929 Y [1] FASTENER GP-FUEL INJ PUMP  
  133-3064 Y [1] GOVERNOR GP-UNIT INJECTOR  
  111-2125 Y [1] LINES GP-GOVERNOR OIL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25390115
 

131-6690: GOVERNOR GP-UNIT INJECTOR

131-6690 GOVERNOR GP-UNIT INJECTOR
S/N 98Z15500-22642
PART OF 133-3064 GOVERNOR GP-UNIT INJECTOR
i00126254 SEBP2539
1316690 GOVERNOR GP-UNIT INJECTOR Parts scheme 1316690 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 131-6689 Y [1] HOUSING GP-GOVERNOR  
2. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
3. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
4. 107-7498 [1] BLOCK AS-BEARING  
  [2] BUSHING  
5. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
6. 7C-8854 [1] PIN-CLEVIS  
7. 8T-1460 [2] RING-RETAINING  
8. 7C-4483 [1] SCREEN AS (OIL INLET)  
9. 7C-5541 [2] PLATE  
10. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
11. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
12. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
13. 108-1612 [1] CLEVIS  
14. 7W-4313 [2] WASHER (5X11X1.5-MM THK)  
15. 8T-7060 [2] RING-RETAINING  
16. 125-8158 [1] SLEEVE-RACK CONTROL  
17. 5C-2874 M [1] NUT (M5X0.8-THD)  
18. 115-2553 [1] VALVE-GOVERNOR SERVO  
19. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
20. 5P-9757 [1] SEAL-O-RING  
21. 6D-9953 [1] PIN-SPRING  
22. 108-1613 [1] PISTON-SERVO  
23. 8C-3312 [1] RING-RETAINING  
24. 7C-5148 [1] CARRIER-FLYWEIGHT  
25. 2S-7316 [2] DOWEL  
26. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
27. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
28. 7W-8993 [2] WEIGHT  
29. 4P-8947 [1] RISER  
30. 4P-0737 [1] SHAFT-RISER  
31. 7W-5591 [1] SEAT-GOVERNOR SPRING  
32. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
33. 7L-3386 [1] SEAL-O-RING  
34. 7C-5884 [1] COVER-OIL SUMP  
35. 4P-4231 [1] COVER-REAR  
36. 6V-5100 [1] SEAL-O-RING  
37. 7C-5883 [7] SHIM (0.25-MM THK)  
38. 7C-3776 [1] PISTON AS  
  4N-6404 [1] RING-RETAINING  
  4N-6406 [1] RING-SPACER  
  4N-6407 [1] SPOOL-DASHPOT  
39. 4P-8948 [1] SEAT AS-SPRING  
40. 7W-1440 [8] SHIM (0.12-MM THK)  
41. 7C-2743 [2] RACE  
42. 7W-5561 [1] BEARING-THRUST  
43. 115-1192 [1] SEAL-GOVERNOR HOUSING  
44. 8C-5061 [1] RING-RETAINING  
45. 7C-5150 [1] PIN  
46. 7C-5480 [1] SPRING-TORSION  
47. 7E-3217 [1] LEVER AS  
48. 3P-3547 [1] RING-RETAINING  
49. 128-4786 [2] PLUG  
50. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
51. 4P-3539 [1] LEVER-THROTTLE  
52. 4P-3537 [1] RING-TOLERANCE  
53. 9Y-1837 [1] SPRING  
54. 6V-8189 [1] NUT (5/16-18-THD)  
55. 117-9099 [1] FLANGE  
56. 114-2897 [1] COVER-FUEL RATIO CONTROL  
57. 7W-5324 [1] BEARING  
58. 6I-1564 [1] DIAPHRAGM  
59. 100-4392 [1] SPRING-SERVO  
60. 100-4394 [1] SEAT-SPRING  
61. 8N-5763 [1] SEAL  
62. 8N-5764 [1] PISTON  
63. 100-4393 [1] SPRING-RETURN  
64. 100-4397 [1] BODY-VALVE  
65. 129-4284 [1] SEAT-SPRING  
66. 100-4390 [1] SPRING  
67. 114-2899 [1] RETAINER-DIAPHRAGM  
68. 7W-1691 [1] WASHER (19.15X35X3-MM THK)  
70. 113-9439 [1] LEVER AS  
  100-5733 [1] PIN  
71. 4P-7351 [1] LEVER AS-SHAFT  
72. 2M-9780 [2] SEAL-O-RING  
73. 7N-2171 [1] RING-RETAINING  
74. 131-7905 [1] LEVER AS  
  8N-0984 [1] PIN-SPRING  
75. 114-5065 [1] COVER  
76. 100-5732 [1] LEVER-TORQUE CAM  
77. M [1] SCREW (M6X0.5X22.5-MM)  
78. 100-5738 M [2] NUT (M6X0.5-THD)  
79. 100-5740 [1] SPRING-TORSION  
80. 100-5739 [1] SPRING-TORSION  
81. 100-5737 M [1] SETSCREW-ADJUSTMENT  
82. 107-7497 [1] WASHER-THRUST (8.25X20X0.5-MM THK)  
83. 109-4587 [1] RING-TOLERANCE  
84. 8T-0269 M [6] BOLT-SOCKET HEAD (M6X1X20-MM)  
85. 5L-4758 [1] SEAL-O-RING  
86. 129-3897 [1] VALVE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25390116
 

133-3064: GOVERNOR GP-UNIT INJECTOR

133-3064 GOVERNOR GP-UNIT INJECTOR
S/N 98Z15500-22642
PART OF 126-0468 GOVERNOR GP-UNIT INJECTOR
i00126266 SEBP2539
1333064 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 131-6690 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 116-6673 [1] CAM AS  
3. 7E-9749 [1] SPRING GP-GOVERNOR  
4. 4P-5605 B [4] SHIM (0.5-MM THK)  
5. 7C-4466 [1] SPRING-DASHPOT  
6. 7C-0989 [1] PLUG-ORIFICE  
7. 100-4391 [1] SPRING-OIL SIDE  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP25390117
 

140-7377: GOVERNOR GP-UNIT INJECTOR

140-7377 GOVERNOR GP-UNIT INJECTOR
S/N 4TF48881-UP; 98Z22643-UP
PART OF 146-8338, 333-3730 ENGINE AR
i00582325 SEBP2539
  For full view, you need register

Parts for your 120H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
  126-5929 Y [1] FASTENER GP-FUEL INJ PUMP  
  142-1420 Y [1] GOVERNOR GP-UNIT INJECTOR  
  111-2125 Y [1] LINES GP-GOVERNOR OIL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25390118
 

142-1420: GOVERNOR GP-UNIT INJECTOR

142-1420 GOVERNOR GP-UNIT INJECTOR
S/N 4TF48881-UP; 98Z22643-UP
PART OF 140-7377 GOVERNOR GP-UNIT INJECTOR
i00671982 SEBP2539
1421420 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 142-5052 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 107-7872 [1] CAM AS  
3. 7E-9749 [1] SPRING GP-GOVERNOR  
4. 4P-5605 B [4] SHIM (0.5-MM THK)  
5. 7C-4466 [1] SPRING-DASHPOT  
6. 7C-0989 [1] PLUG-ORIFICE  
7. 4P-6493 [1] PLATE-INFORMATION (GOVERNOR)  
8. 100-4391 [1] SPRING-OIL SIDE  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP25390119
 

142-5052: GOVERNOR GP-UNIT INJECTOR

142-5052 GOVERNOR GP-UNIT INJECTOR
S/N 4TF48881-UP; 98Z22643-UP
PART OF 142-1420 GOVERNOR GP-UNIT INJECTOR
i00671984 SEBP2539
1425052 GOVERNOR GP-UNIT INJECTOR Parts scheme 1425052 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 142-5050 Y [1] HOUSING GP-GOVERNOR  
2. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
3. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
4. 7E-3216 [1] BLOCK AS-BEARING  
  6F-5933 [2] BEARING AS-NEEDLE  
5. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
6. 7C-8854 [1] PIN-CLEVIS  
7. 8T-1460 [2] RING-RETAINING  
8. 7C-4483 [1] SCREEN AS (OIL INLET)  
9. 7C-5541 [2] PLATE  
10. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
11. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
12. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
13. 108-1612 [1] CLEVIS  
14. 7W-4313 [2] WASHER (5X11X1.5-MM THK)  
15. 8T-7060 [2] RING-RETAINING  
16. 125-8158 [1] SLEEVE-RACK CONTROL  
17. 5C-2874 M [1] NUT (M5X0.8-THD)  
18. 115-2553 [1] VALVE-GOVERNOR SERVO  
19. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
20. 5P-9757 [1] SEAL-O-RING  
21. 6D-9953 [1] PIN-SPRING  
22. 108-1613 [1] PISTON-SERVO  
23. 8C-3312 [1] RING-RETAINING  
24. 7C-5148 [1] CARRIER-FLYWEIGHT  
25. 2S-7316 [2] DOWEL  
26. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
27. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
28. 7W-8993 [2] WEIGHT  
29. 4P-8947 [1] RISER  
30. 4P-0737 [1] SHAFT-RISER  
31. 7W-5591 [1] SEAT-GOVERNOR SPRING  
32. 099-2374 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
33. 7L-3386 [1] SEAL-O-RING  
34. 7C-5884 [1] COVER-OIL SUMP  
35. 4P-4231 [1] COVER-REAR  
36. 6V-5100 [1] SEAL-O-RING  
37. 7C-5883 B [7] SHIM (0.25-MM THK)  
38. 7C-3776 [1] PISTON AS  
  4N-6404 [1] RING-RETAINING  
  4N-6406 [1] RING-SPACER  
  4N-6407 [1] SPOOL-DASHPOT  
39. 4P-8948 [1] SEAT AS-SPRING  
40. 7W-1440 B [8] SHIM (0.12-MM THK)  
41. 7C-2743 [2] RACE  
42. 7W-5561 [1] BEARING-THRUST  
43. 115-1192 [1] SEAL-GOVERNOR HOUSING  
44. 8C-5061 [1] RING-RETAINING  
45. 7C-5150 [1] PIN  
46. 7C-5480 [1] SPRING-TORSION  
47. 7E-3217 [1] LEVER AS  
48. 3P-3547 [1] RING-RETAINING  
49. 128-4786 [2] PLUG  
50. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
51. 4P-3539 [1] LEVER-THROTTLE  
52. 4P-3537 [1] RING-TOLERANCE  
53. 9Y-1837 [1] SPRING  
54. 6V-8189 [1] NUT (5/16-18-THD)  
55. 117-9099 [1] FLANGE  
56. 114-2897 [1] COVER-FUEL RATIO CONTROL  
57. 7W-5324 [1] BEARING  
58. 6I-1564 [1] DIAPHRAGM  
59. 100-4392 [1] SPRING-SERVO  
60. 100-4394 [1] SEAT-SPRING  
61. 8N-5763 [1] SEAL  
62. 8N-5764 [1] PISTON  
63. 100-4393 [1] SPRING-RETURN  
64. 100-4397 [1] BODY-VALVE  
65. 129-4284 [1] SEAT-SPRING  
66. 100-4390 [1] SPRING  
67. 114-2899 [1] RETAINER-DIAPHRAGM  
68. 7W-1691 [1] WASHER (19.15X35X3-MM THK)  
70. 113-9439 [1] LEVER AS  
  100-5733 [1] PIN  
71. 4P-7351 [1] LEVER AS-SHAFT  
72. 2M-9780 [2] SEAL-O-RING  
73. 7N-2171 [1] RING-RETAINING  
74. 131-7905 [1] LEVER AS  
  8N-0984 [1] PIN-SPRING  
75. 114-5065 [1] COVER  
76. 100-5732 [1] LEVER-TORQUE CAM  
77. M [1] SCREW (M6X0.5X22.5-MM)  
78. 100-5738 M [2] NUT (M6X0.5-THD)  
79. 100-5740 [1] SPRING-TORSION  
80. 100-5739 [1] SPRING-TORSION  
81. 100-5737 M [1] SETSCREW-ADJUSTMENT  
82. 107-7497 [1] WASHER-THRUST (8.25X20X0.5-MM THK)  
83. 109-4587 [1] RING-TOLERANCE  
84. 8T-0269 M [6] BOLT-SOCKET HEAD (M6X1X20-MM)  
85. 5L-4758 [1] SEAL-O-RING  
86. 129-3897 [1] VALVE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 120H :

CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
BASE GP-FUEL FILTER
129-1102 BASE GP-FUEL FILTER
TURBOCHARGER GP
140-7386 TURBOCHARGER GP
TURBOCHARGER GP
135-2650 TURBOCHARGER GP
TURBOCHARGER GP
115-5853 TURBOCHARGER GP
TURBOCHARGER GP
115-4068 TURBOCHARGER GP
MUFFLER & MOUNTING GP
7C-3707 MUFFLER & MOUNTING GP
253-4444 MUFFLER & CONVERTER
CONTROL GP-GOVERNOR
8W-4743 CONTROL GP-GOVERNOR
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
FASTENER GP-FUEL INJ PUMP
126-5929 FASTENER GP-FUEL INJ PUMP
126-0468 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
131-6690 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
133-3064 GOVERNOR GP-UNIT INJECTOR
140-7377 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
142-1420 GOVERNOR GP-UNIT INJECTOR

Truck sale:

Caterpillar 120H
 
Caterpillar 120H
- motor graders
CAVPOWER
 
105,000 
Caterpillar 120H, motor graders, Construction


 
105,000 
Caterpillar 120H, motor graders, Construction


Caterpillar 120H, motor graders, Construction
105,000 
Caterpillar 120H, motor graders, Construction

RING POWER CORP.
Caterpillar 120H, motorgrader mijnbouw, Bouw
 
Caterpillar 120H, motorgrader mijnbouw, Bouw

CGT - COMPAGNIA GENERALE TRATTORI