POWER TRAIN
CONTROL GP-TRANSMISSION HYDCOOLER GP
COUPLING GP
DIFFERENTIAL & BEVEL GEAR GP
DRIVE GP-FINAL
FILLER GP-POWER TRAIN OIL
POWER TRAIN
CONTROL GP-TRANSMISSION HYD
#SEBP25390220
281-3159: CONTROL GP-TRANSMISSION HYD
281-3159 CONTROL GP-TRANSMISSION HYD
S/N FCD2369-UP
PART OF 144-2234 TRANSMISSION AR
S/N FCD2369-UP
PART OF 144-2234 TRANSMISSION AR
For full view, you need register
Parts for your 120H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 281-3157 Y | [1] | VALVE GP-TRANSMISSION CONTROL | |
| 2. | 6V-3918 M | [5] | BOLT (M8X1.25X50-MM) | |
| 3. | 9P-9150 | [66] | WASHER (8.25X18X0.84-MM THK) | |
| 4. | 1T-0738 | [33] | WASHER (8.4X19X1.83-MM THK) | |
| 5. | 8C-4984 M | [14] | BOLT (M8X1.25X150-MM) | |
| 6. | 3E-8005 M | [14] | BOLT (M8X1.25X160-MM) | |
| 7. | 4S-5879 | [1] | SEAL-O-RING | |
| 8. | 147-1771 | [1] | HARNESS AS-TRANSMISSION | |
| 3S-2093 | [7] | STRAP-CABLE | ||
| 137-1120 | [1] | HARNESS AS-TRANSMISSION | ||
| 9. | 8T-0639 M | [3] | BOLT (M6X1X12-MM) | |
| 10. | 173-7252 | [1] | SWITCH AS-PRESSURE (TRANSMISSION MODULATION) | |
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-9737 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 11. | 144-2231 | [1] | CLIP | |
| 12. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 13. | 6V-5217 M | [3] | BOLT (M8X1.25X20-MM) | |
| 14. | 3J-1907 | [2] | SEAL-O-RING | |
| 15. | 6V-0484 | [1] | ELBOW | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25390221
6Y-7821: CONTROL GP-TRANSMISSION HYD
6Y-7821 CONTROL GP-TRANSMISSION HYD
S/N 7LX750-99999
PART OF 9W-7115 TRANSMISSION AR
S/N 7LX750-99999
PART OF 9W-7115 TRANSMISSION AR
For full view, you need register
Parts for your 120H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-7822 Y | [1] | CONTROL GP-TRANSMISSION HYD | |
| 2. | 6V-3918 M | [5] | BOLT (M8X1.25X50-MM) | |
| 3. | 9P-9150 | [66] | WASHER (8.25X18X0.84-MM THK) | |
| 4. | 1T-0738 | [33] | WASHER (8.4X19X1.83-MM THK) | |
| 5. | 8C-4984 M | [14] | BOLT (M8X1.25X150-MM) | |
| 6. | 3E-8005 M | [14] | BOLT (M8X1.25X160-MM) | |
| 7. | 4S-5879 | [1] | SEAL-O-RING | |
| 8. | 9U-9312 | [1] | HARNESS AS-SOLENOID | |
| 9. | 8T-0639 M | [3] | BOLT (M6X1X12-MM) | |
| 10. | 111-7088 | [1] | SWITCH AS-PRESSURE (INCHING) | |
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-9738 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 11. | 9G-9150 | [1] | CLIP | |
| 12. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 13. | 6V-5217 M | [3] | BOLT (M8X1.25X20-MM) | |
| 14. | 3J-1907 | [2] | SEAL-O-RING | |
| 15. | 6V-0484 | [1] | ELBOW | |
| 16. | 149-8292 | [1] | SWITCH AS-TEMPERATURE (TRANSMISSION OIL) | |
| 17. | 3K-0360 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25390222
6Y-7822: CONTROL GP-TRANSMISSION HYD
6Y-7822 CONTROL GP-TRANSMISSION HYD
S/N 7LX750-99999
PART OF 6Y-7821 CONTROL GP-TRANSMISSION HYD
S/N 7LX750-99999
PART OF 6Y-7821 CONTROL GP-TRANSMISSION HYD
For full view, you need register
Parts for your 120H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-7823 Y | [1] | VALVE GP-SELECTOR & PRESS CONT (TRANSMISSION) | |
| 2. | 8E-9476 | [1] | PLATE | |
| 3. | 6Y-7824 Y | [1] | VALVE GP-SELECTOR & PRESS CONT (TRANSMISSION) | |
| 4. | 110-5161 | [1] | MANIFOLD | |
| 5. | 8E-9478 | [1] | PLATE | |
| 6. | 8E-9474 | [1] | COVER | |
| 7. | 6I-9395 | [1] | SCREEN (TRANSMISSION) | |
| 8. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 9. | 6V-3965 | [8] | FITTING (QUICK DISCONNECT) | |
| 10. | 3J-1907 | [9] | SEAL-O-RING | |
| 11. | 6V-0852 | [8] | CAP-DUST | |
| 12. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
| 13. | 6I-8823 | [1] | PLATE-SOLENOID CHART | |
| 14. | 1T-0738 | [2] | WASHER (8.4X19X1.83-MM THK) | |
| 15. | 9P-9150 | [4] | WASHER (8.25X18X0.84-MM THK) | |
| 16. | 3E-8006 M | [2] | BOLT (M8X1.25X130-MM) | |
| 17. | 3J-6956 | [1] | SPRING | |
| 18. | 9L-9068 | [6] | DOWEL | |
| 19. | 8F-6230 | [1] | SEAL-O-RING | |
| 20. | 4D-6695 | [4] | SEAL-O-RING | |
| 21. | 6Y-4978 | [1] | POPPET | |
| 22. | 4D-1322 | [1] | RING-RETAINING | |
| 23. | 6Y-2584 | [1] | RETAINER | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25390223
117-9571: COOLER GP-TRANSMISSION OIL
117-9571 COOLER GP-TRANSMISSION OIL
S/N 5FM1-UP
PART OF 112-5819 INSTALLATION AR-ENGINE
S/N 5FM1-UP
PART OF 112-5819 INSTALLATION AR-ENGINE
For full view, you need register
#SEBP25390224
6Y-3978: COUPLING GP-TORSIONAL
For full view, you need register
#SEBP25390225
8W-5575: DIFFERENTIAL & BEVEL GEAR GP
8W-5575 DIFFERENTIAL & BEVEL GEAR GP
S/N 5FM1-UP
PART OF 115-0629 DIFFERENTIAL AR
AN ATTACHMENT
S/N 5FM1-UP
PART OF 115-0629 DIFFERENTIAL AR
AN ATTACHMENT
For full view, you need register
Parts for your 120H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5D-9844 | [1] | BOLT-LOCKING (3/8-16X2-IN) | |
| 2. | 5P-8245 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 3. | 034-3557 | [5] | BOLT-LOCKING (3/8-16X1.125-IN) | |
| 4. | 5M-2894 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5. | 2K-5109 | [1] | GASKET | |
| 6. | 8W-5279 | [1] | RETAINER | |
| 7. | 123-4003 | [1] | SEAL-LIP TYPE | |
| 8. | 7S-4571 | [1] | SEAL-O-RING | |
| 9. | 5P-5813 | [1] | LOCKNUT-BEARING (2.75X18-THD) | |
| 10. | 9B-0143 | [1] | LOCKWASHER | |
| 11. | 7D-8347 | [1] | WASHER-TAB | |
| 12. | 8X-2316 | [1] | HOUSING | |
| 13. | 5L-2031 | [1] | CUP-BEARING | |
| 14. | 5L-2030 | [1] | CONE-BEARING | |
| 15. | 0S-1587 | [8] | BOLT (1/2-13X1.75-IN) | |
| 16. | 8V-3273 B | [1] | SHIM PACK (INCLUDES 10-SHIMS) | |
| 17. | 299-3330 | [12] | NUT (1/2-13-THD) | |
| 18. | 9F-1399 | [1] | SEAL-O-RING | |
| 19. | 1S-3184 | [1] | CONE-BEARING | |
| 20. | 2D-9454 | [1] | CUP-BEARING | |
| 21. | 9D-3306 | [1] | CAGE | |
| 22. | 6G-4702 | [1] | NUT (4-1/4-12-THD) | |
| 23. | 126-2728 | [1] | CONE | |
| 24. | 2N-2138 | [1] | CUP-BEARING | |
| 25. | 6F-0698 | [1] | DOWEL | |
| 26. | 8D-9784 | [2] | LOCK | |
| 27. | 030-8535 | [2] | BOLT-LOCKING (3/8-16X0.875-IN) | |
| 28. | 8X-2305 | [1] | CARRIER AS | |
| 29. | 0S-1756 | [4] | BOLT (3/4-10X4.25-IN) | |
| 30. | 5P-8248 | [4] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 31. | 4D-5292 | [1] | RING-RETAINING | |
| 32. | 1P-2662 | [1] | CONE-BEARING | |
| 33. | 1P-2636 | [1] | CUP-BEARING | |
| 34. | 6G-4701 | [1] | NUT-BEARING (4-1/4-12-THD) | |
| 35. | 8X-2308 | [1] | CAGE AS | |
| 2D-6642 | [1] | BALL | ||
| 36. | 2H-5001 | [1] | SEAL-O-RING | |
| 37. | 8W-5111 | [1] | SLEEVE | |
| 38. | 8X-1206 | [1] | SHAFT-PINION | |
| 39. | 8W-5587 Y | [1] | DIFFERENTIAL GP | |
| 40. | 9G-2991 | [2] | RING-SEAL | |
| 41. | 279-6632 | [12] | WASHER (13.5X25.5X3-MM THK) | |
| B | USE AS REQUIRED | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25390226
115-0629: DIFFERENTIAL AR
For full view, you need register
#SEBP25390227
8W-5587: DIFFERENTIAL GP
8W-5587 DIFFERENTIAL GP
S/N 5FM1-UP
PART OF 8W-5575 DIFFERENTIAL & BEVEL GEAR GP
AN ATTACHMENT
S/N 5FM1-UP
PART OF 8W-5575 DIFFERENTIAL & BEVEL GEAR GP
AN ATTACHMENT
For full view, you need register
Parts for your 120H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8W-5578 | [1] | PISTON | |
| 2. | 8D-9738 | [1] | SEAL-RING | |
| 3. | 6T-0840 | [1] | RING-SEAL (INTERNAL) | |
| 4. | 6Y-7955 | [7] | DISC-FRICTION | |
| 5. | 8X-1205 | [1] | GEAR-BEVEL (50 TEETH) | |
| 6. | 8X-2310 | [1] | HOUSING AS | |
| 7. | 2D-6642 | [1] | BALL | |
| 8. | 3D-6509 | [2] | DOWEL | |
| 9. | 5P-8247 | [18] | WASHER-HARD (17X32X3.5-MM THK) | |
| 10. | 8D-9756 | [2] | WASHER-THRUST | |
| 11. | 5B-0841 | [18] | BOLT (5/8-18X1.75-IN) | |
| 12. | 8X-4865 | [1] | HOUSING AS | |
| 13. | 3D-6509 | [2] | DOWEL | |
| 15. | 1B-2886 | [9] | BOLT (1/2-13X3.75-IN) | |
| 16. | 5P-8245 | [9] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 2B-0947 | [8] | BOLT (1/2-13X2.25-IN) | |
| 18. | 5P-8245 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 19. | 8W-5586 | [1] | SPIDER | |
| 20. | 8X-4869 | [3] | SPACER | |
| 21. | 8W-5589 | [3] | PINION AS (11 TEETH) | |
| 22. | 8D-9749 | [1] | BUSHING | |
| 23. | 109-4580 | [1] | GEAR-DIFFERENTIAL BEVEL (18 TEETH) | |
| 24. | 109-4581 | [1] | GEAR-DIFFERENTIAL BEVEL (18 TEETH) | |
| 25. | 2G-1084 | [1] | DISC | |
| 26. | 8D-9718 | [8] | DISC | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
#SEBP25390228
8W-4980: DRIVE GP-FINAL
For full view, you need register
Parts for your 120H MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 195-8553 | [2] | GEAR-SUN (17-TEETH) | |
| 2. | 6G-7213 | [2] | CARRIER-PLANETARY (52-TEETH) | |
| 3. | 265-9125 | [8] | RETAINER | |
| 4. | 8W-2307 | [8] | SHAFT | |
| 5. | 2M-5685 | [16] | BEARING | |
| 6. | 8D-8634 | [8] | GEAR-PLANETARY (24-TEETH) | |
| 7. | 8D-8639 | [2] | GEAR-RING (67-TEETH) | |
| 8. | 5J-1086 | [2] | SEAL-O-RING | |
| 9. | 5D-0353 | [16] | BOLT-LOCKING (3/8-16X1-IN) | |
| 10. | 5M-2894 | [18] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 11. | 340-4515 | [40] | NUT (5/8-11-THD) | |
| 12. | 340-4518 | [40] | WASHER-HARD (17X30X5-MM THK) | |
| 13. | 329-0412 | [2] | SEAL-LIP TYPE | |
| 14. | 9F-2247 | [2] | PLUG-PIPE | |
| 15. | 8X-3276 | [4] | WASHER-THRUST (247X281.28X6.97-MM THK) | |
| 16. | 219-2434 | [4] | RING-WEAR | |
| 17. | 030-0061 | [2] | CONE-BEARING | |
| 18. | 030-0060 | [2] | CUP-BEARING (TAPERED ROLLER) | |
| 19. | 8X-3395 | [2] | HOUSING | |
| 21. | 8S-9092 | [32] | BOLT (5/8-11X2.25-IN) | |
| 22. | 2G-6377 | [4] | SPROCKET (20-TEETH) | |
| 23. | 5P-2545 | [2] | SEAL-O-RING | |
| 24. | 030-8535 | [2] | BOLT-LOCKING (3/8-16X0.875-IN) | |
| 25. | 8W-4981 | [2] | LOCK | |
| 26. | 8W-4979 | [2] | SHAFT-DRIVE | |
| 27. | 6K-8329 | [2] | CONE-BEARING | |
| 28. | 6F-2956 | [2] | CUP-BEARING | |
| 29. | 2G-6396 | [2] | NUT (2-7/8-12-THD) | |
| 30. | 219-2437 | [2] | RETAINER | |
| 31. | 0S-1585 | [48] | BOLT (1/2-13X1.5-IN)(1/2-13X38.1) | |
| 32. | 8X-3364 B | [2] | SHIM PACK (INCLUDES 10-SHIMS) | |
| 33. | 8D-8628 | [2] | WASHER (49.3X91.29X6.35-MM THK) | |
| 34. | 8D-8621 | [2] | RING-RETAINING | |
| 35. | 277-8996 | [2] | SEAL-LIP TYPE | |
| 36. | 8X-2968 | [2] | HOUSING-AXLE | |
| 37. | 8X-8376 | [16] | WASHER (44.78X79.25X2.92-MM THK) | |
| 38. | 5P-8245 | [48] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 39. | 5P-8247 | [32] | WASHER-HARD (17X32X3.5-MM THK) | |
| QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES | ||||
| B | USE AS REQUIRED | |||
#SEBP25390229
8W-5925: FILLER GP-POWER TRAIN OIL
8W-5925 FILLER GP-POWER TRAIN OIL
S/N 5FM1-UP
PART OF 112-4119 POWER TRAIN AR
S/N 5FM1-UP
PART OF 112-4119 POWER TRAIN AR
For full view, you need register
