AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6E-3136 PUMP GP-PISTON S/N 5FM1-UP PART OF 8X-2379 PUMP & MTG GP-STEERING 120H MOTOR GRADER


HYDRAULIC SYSTEM
PUMP GP
DRIVE GP
SWIVEL GP
TANK GP

MOTOR GRADER 120H MOTOR GRADER 5FM
 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2539 120H 5FM   (1996)

HYDRAULIC SYSTEM

PUMP GP
PUMP & MTG GP-STEERING
8X-2379 PUMP & MTG GP-STEERING
PUMP GP-PISTON
6E-3136 PUMP GP-PISTON
ROTATING GP-PUMP
6E-6571 ROTATING GP-PUMP
VALVE GP-PUMP CONTROL
104-3122 VALVE GP-PUMP CONTROL
 

#SEBP25390500
 

6E-3136: PUMP GP-PISTON

6E-3136 PUMP GP-PISTON
S/N 5FM1-UP
PART OF 8X-2379 PUMP & MTG GP-STEERING
i00125234 SEBP2539
6E3136 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-6594 [1] BEARING-SWASH  
2. 6E-4224 [1] PLUG-SWASHPLATE  
3. 033-6036 [1] SEAL-O-RING  
4. 102-2386 [1] HEAD-PUMP  
5. 9T-1699 [1] SPRING  
6. 9T-1710 [1] POPPET  
7. 9T-1636 [1] SEAT  
8. 6E-6596 [1] COVER-TRUNNION  
9. 6V-3834 [1] SEAL-O-RING  
10. 3E-4302 M [2] SCREW-FLAT HEAD (M4X0.7X10-MM)  
11. 6V-8214 M [3] BOLT (M6X1X20-MM)  
12. 6E-6597 [1] BEARING-SWASH  
13. 6V-7673 M [2] BOLT (M12X1.75X50-MM)  
14. 8T-0372 M [4] BOLT (M12X1.75X90-MM)  
15. 104-3122 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)  
16. 109-3204 [3] SEAL-O-RING  
17. 6V-8337 M [4] BOLT-SOCKET HEAD (M8X1.25X35-MM)  
18. 095-0888 [2] PIN-SPRING  
19. 102-2385 [1] SHAFT-PUMP  
20. 102-2384 [1] HOUSING-PUMP  
21. 006-8663 [1] RING  
22. 8T-4750 [1] SEAL-LIP TYPE  
23. 6E-6599 [1] KIT-BIAS PISTON  
    (INCLUDES SPRING,ROD,PISTON,SEAL)
24. 6E-6600 [1] SPRING-BIAS  
25. 6E-6571 Y [1] ROTATING GP-PUMP (STEERING)  
26. 6E-6601 [1] GASKET  
27. 7L-9061 [2] SEAL-O-RING  
28. 3E-7417 [2] PLUG  
29. 8T-7876 [2] SEAL-O-RING  
30. 9T-1633 [1] PLATE  
31. 9T-2197 B [1] SHIM PACK (INCLUDES 17-SHIMS)  
32. 1P-6872 [1] CUP-BEARING  
33. 004-9040 [1] CONE-BEARING  
34. 9T-1652 [1] PIN  
35. 6E-6602 [1] KIT-PISTON CONTROL  
    (INCLUDES ROD,PISTON,SEAL)
36. 167-1802 [1] SWASHPLATE GP  
  167-1801 [2] STOP  
  1H-3937 [2] PIN  
37. 7T-8273 [1] CUP-BEARING  
38. 7T-8272 [1] CONE-BEARING  
39. 3K-0360 [1] SEAL-O-RING  
40. 9S-4185 [1] PLUG (3/4-16-THD)  
41. 104-3124 [1] SHIELD  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25390501
 

6E-6571: ROTATING GP-PUMP

6E-6571 ROTATING GP-PUMP
S/N 5FM1-UP
PART OF 6E-3136 PUMP GP-PISTON
i00125240 SEBP2539
6E6571 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-6604 [2] PLATE-SPACER  
2. 6E-6605 [2] PLATE-LIMITER  
3. 3T-0849 M [4] BOLT-SOCKET HEAD (M6X1X25-MM)  
4. 9T-7755 [1] SPRING  
5. 009-2069 [1] RING  
6. 9T-7754 [1] GUIDE-OUTER  
7. 9T-7757 [1] BARREL  
8. 9T-7756 [1] GUIDE-INNER  
9. 9T-7759 [1] PLATE-RETAINING  
10. 9T-7761 [9] PISTON  
  M   METRIC PART
 

#SEBP25390502
 

7D-9600: SHAFT GP-PUMP DRIVE

7D-9600 SHAFT GP-PUMP DRIVE
S/N 5FM1-476
PART OF 112-4103 CHASSIS AR
i00125312 SEBP2539
7D9600 SHAFT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [4] BOLT (3/8-16X1.75-IN)  
2. 5Y-0769 Y [1] UNIVERSAL JOINT GP-PUMP DRIVE (STEERING)  
3. 0L-0478 [4] BOLT (3/8-24X1.75-IN)  
4. 7D-9267 [1] YOKE  
5. 1B-8737 C [1] KEY-WOODRUFF  
6. 1D-5120 [1] NUT-JAM (3/4-16-THD)  
  5P-8248 [1] WASHER-HARD (20X36.5X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25390503
 

7D-9600: SHAFT GP-PUMP DRIVE

7D-9600 SHAFT GP-PUMP DRIVE
S/N 5FM477-UP
PART OF 112-4103 CHASSIS AR
i00395587 SEBP2539
7D9600 SHAFT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [4] BOLT (3/8-16X1.75-IN)  
2. 112-5495 CY [1] UNIVERSAL JOINT GP-PUMP DRIVE (STEERING)  
3. 0L-0478 [4] BOLT (3/8-24X1.75-IN)  
4. 7D-9267 [1] YOKE  
5. 1B-8737 [1] KEY-WOODRUFF  
6. 1D-5120 [1] NUT-JAM (3/4-16-THD)  
  5P-8248 [1] WASHER-HARD (20X36.5X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25390504
 

260-6502: SWIVEL GP

260-6502 SWIVEL GP -CIRCLE DRIVE
S/N 5FM1976-UP
PART OF 106-4787, 117-3855 LINES GP-HYDRAULIC
Type 1
AN ATTACHMENT
i02322216 SEBP2539
2606502 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-1246 B [6] SHIM (0.13-MM THK)  
2. 8J-2331 [7] SEAL  
3. 173-1008 [1] ROTOR  
4. 173-1009 [1] RETAINER  
5. 223-0580 [1] COVER  
7. 260-6501 [1] BODY  
8. 173-1007 [2] SEAL  
9. 1P-3700 [4] SEAL-RECTANGULAR  
10. 2H-3928 [7] SEAL-O-RING  
11. 4J-9964 [2] SEAL  
12. 5P-2566 [6] BOLT (1/2-13X1.5-IN)  
13. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  B   USE AS REQUIRED
 

#SEBP25390505
 

260-6502: SWIVEL GP

260-6502 SWIVEL GP -CIRCLE DRIVE
S/N 5FM1976-UP
PART OF 106-4787, 117-3855 LINES GP-HYDRAULIC
Type 2
AN ATTACHMENT
i06627839 SEBP2539
2606502 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-1246 B [6] SHIM (0.13-MM THK)  
2. 8J-2331 [7] SEAL  
3. 454-3032 [1] ROTOR  
4. 173-1009 [1] RETAINER  
5. 5P-2566 C [2] BOLT (1/2-13X1.5-IN)  
6. 454-2957 [1] BODY  
7. 148-8395 C [4] PLUG AS  
    (EACH INCLUDES)
  9S-8005 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
8. 173-1007 [2] SEAL  
9. 2H-3928 [7] SEAL-O-RING  
10. 4J-9964 [2] SEAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25390506
 

9T-5604: SWIVEL GP

9T-5604 SWIVEL GP
S/N 5FM1-1975
PART OF 106-4787, 117-3855 LINES GP-HYDRAULIC
AN ATTACHMENT
i00125587 SEBP2539
9T5604 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-1246 B [6] SHIM (0.13-MM THK)  
2. 4K-1493 [2] SCREW-HOLLOW (1/2-13X1-IN)  
3. 8J-0380 [1] RETAINER  
4. 9T-5603 [1] BODY  
5. 8J-2331 [7] SEAL  
6. 2H-3928 [7] SEAL-O-RING  
7. 8J-0386 [1] ROTOR  
8. 5P-2566 [4] BOLT (1/2-13X1.5-IN)  
  8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 3H-0107 [4] SEAL-O-RING  
10. 8J-0377 [1] COVER  
11. 4J-9964 [2] SEAL  
12. 8J-2330 [2] SEAL  
  B   USE AS REQUIRED
 

#SEBP25390507
 

214-1984: TANK & FILTER GP-HYDRAULIC

214-1984 TANK & FILTER GP-HYDRAULIC
S/N 5FM2630-UP
PART OF 214-1983 TANK & MTG GP-HYDRAULIC
i01747049 SEBP2539
2141984 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-2913 [1] PIN-CLEVIS  
2. 1R-0774 [1] FILTER ELEMENT AS-OIL (ADVANCED EFFICIENCY)  
3. 2S-5100 [1] VALVE-MANUAL (HYDRAULIC TANK)  
4. 3F-1547 [1] SEAL-O-RING  
6. 4M-6921 [1] WASHER-SPRING  
7. 5D-1911 [1] COVER-HYDRAULIC CAP  
8. 226-2871 [1] ROD  
9. 9J-1979 [1] RETAINER AS  
12. 9J-3047 [1] STRAINER (HYDRAULIC)  
13. 9M-7394 [1] LEVER  
14. 141-9661 [1] SPACER (20X128X6-MM THK)  
15. 226-2870 [1] CAP AS (HYDRAULIC TANK)  
16. 214-1982 [1] TANK AS  
17. 217-2661 [1] GAUGE-SIGHT (HYDRAULIC)  
18. 086-0507 [1] PIN  
19. 1L-5072 [1] DOWEL  
20. 2D-4202 [1] PLATE  
21. 2J-7761 [1] RING-RETAINING  
22. 3K-6060 [1] LOCKNUT (3/8-16-THD)  
23. 3G-0361 [1] GASKET (HYDRAULIC TANK FILL CAP)  
25. 7D-1195 [1] SEAL-O-RING  
26. 7H-1447 [1] CAP-FILLER (HYDRAULIC TANK)  
27. 8T-2275 [1] BALL  
28. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
30. 9H-6454 [1] GASKET  
31. 3B-4611 [1] PIN-COTTER  
  M   METRIC PART
 

#SEBP25390508
 

9T-7984: TANK & FILTER GP-HYDRAULIC

9T-7984 TANK & FILTER GP-HYDRAULIC
S/N 5FM1-UP
PART OF 8X-2369 TANK & MTG GP-HYDRAULIC
i00125592 SEBP2539
9T7984 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-7985 [1] TANK AS  
2. 0S-0509 [2] BOLT (3/8-16X0.75-IN)  
3. 9J-1991 [1] HANDLE (HYDRAULIC FILTER COVER)  
4. 7B-3235 [4] BOLT (1/2-13X1.375-IN)  
5. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 8X-5734 [1] PLATE  
7. 8X-5735 [1] PLATE  
8. 6V-5839 [4] WASHER (11X21X2.5-MM THK)  
9. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
10. 5D-1911 [1] COVER-HYDRAULIC CAP  
11. 9M-7394 [1] LEVER (HYDRAULIC CAP)  
12. 1L-5072 [1] DOWEL  
13. 0S-1594 [70] BOLT (3/8-16X1-IN)  
14. 2K-4973 [84] LOCKNUT (3/8-16-THD)  
16. 6E-2266 [1] ROD-THREADED  
17. 9J-1979 [1] RETAINER AS  
18. 8T-4896 [84] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 7D-1195 [1] SEAL-O-RING  
20. 9J-1988 [1] VALVE  
21. 9J-1985 [1] TUBE AS  
22. 1L-4349 [1] SPRING  
23. 3G-3498 [1] FLANGE  
24. 5K-9107 [2] BOLT-LOCKING (3/8-16X0.75-IN)  
25. 2S-5100 [1] VALVE-MANUAL  
26. 6E-2267 [1] CAP  
27. 6D-9157 [1] SEAL-O-RING  
28. 7H-1447 [1] CAP-FILLER (HYDRAULIC)  
29. 8T-2275 [1] BALL  
30. 2D-4202 [1] PLATE  
31. 9H-6454 [1] GASKET  
32. 3G-0361 [1] GASKET  
33. 9J-3047 [1] STRAINER (HYDRAULIC)  
34. 3G-2692 [1] RETAINER  
35. 6E-2169 [1] PLATE-INDICATOR  
36. 4J-8251 [1] GROMMET  
37. 4J-8252 [1] GAUGE-SIGHT  
38. 5D-0353 [2] BOLT-LOCKING (3/8-16X1-IN)  
39. 5H-6005 [2] SEAL-O-RING  
40. 5P-9119 BD GASKET-TAPE (ADHESIVE BACKED)  
41. 6E-2269 [1] COVER  
42. 141-9661 [1] SPACER (20X128X6-MM THK)  
43. 086-0507 [1] PIN  
44. 2J-7761 [1] RING-RETAINING  
45. 4D-7794 [3] CLIP  
46. 4M-6921 [1] WASHER-SPRING  
47. 9S-4183 [1] PLUG (1-1/16-12-THD)  
48. 3D-2824 [1] SEAL-O-RING  
49. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP25390509
 

214-1983: TANK & MTG GP-HYDRAULIC

214-1983 TANK & MTG GP-HYDRAULIC
S/N 5FM2630-UP
PART OF 112-4103 CHASSIS AR
i01707184 SEBP2539
2141983 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-2641 [1] PADLOCK GP  
  5P-8500 [1] KEY  
2. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 214-1984 Y [1] TANK & FILTER GP-HYDRAULIC  
4. 7X-0325 [4] BOLT (1/2-13X2.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 120H :

PUMP GP-METERING
102-1501 PUMP GP-METERING
PUMP & MTG GP-STEERING
8X-2379 PUMP & MTG GP-STEERING
MOTOR GP-GEROTOR
105-3196 MOTOR GP-GEROTOR
LOCK GP-CENTERSHIFT
8X-1945 LOCK GP-CENTERSHIFT
LOCK GP-CENTERSHIFT
142-8205 LOCK GP-CENTERSHIFT
LOCK GP-CENTERSHIFT
142-8205 LOCK GP-CENTERSHIFT
LINES GP-STEERING
115-8080 LINES GP-STEERING
LINES GP-RIPPER
8X-9142 LINES GP-RIPPER
ROTATING GP-PUMP
6E-6571 ROTATING GP-PUMP
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
SWIVEL GP
260-6502 SWIVEL GP
SWIVEL GP
260-6502 SWIVEL GP
SWIVEL GP
9T-5604 SWIVEL GP
TANK & FILTER GP-HYDRAULIC
214-1984 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
9T-7984 TANK & FILTER GP-HYDRAULIC

Truck sale:

Caterpillar 120H
 
Caterpillar 120H
- motor graders
CAVPOWER
 
105,000 
Caterpillar 120H, motor graders, Construction


 
105,000 
Caterpillar 120H, motor graders, Construction


Caterpillar 120H, motor graders, Construction
105,000 
Caterpillar 120H, motor graders, Construction

RING POWER CORP.
Caterpillar 120H, motorgrader mijnbouw, Bouw
 
Caterpillar 120H, motorgrader mijnbouw, Bouw

CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.