AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8X-2369 TANK & MTG GP-HYDRAULIC S/N 5FM1-2629 PART OF 112-4103 CHASSIS AR 120H MOTOR GRADER


HYDRAULIC SYSTEM
TANK GP
SHAFT GP
VALVE & LINKAGE GP

MOTOR GRADER 120H MOTOR GRADER 5FM
 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2539 120H 5FM   (1996)

HYDRAULIC SYSTEM

TANK GP
TANK & FILTER GP-HYDRAULIC
214-1984 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
9T-7984 TANK & FILTER GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
214-1983 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
8X-2369 TANK & MTG GP-HYDRAULIC
 

#SEBP25390510
 

8X-2369: TANK & MTG GP-HYDRAULIC

8X-2369 TANK & MTG GP-HYDRAULIC
S/N 5FM1-2629
PART OF 112-4103 CHASSIS AR
i00125501 SEBP2539
8X2369 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-7984 Y [1] TANK & FILTER GP-HYDRAULIC  
2. 8X-5731 [2] PLATE  
3. 9D-7924 [2] MOUNTING AS  
4. 9B-7237 [8] BOLT (3/8-16X1.25-IN)  
5. 8T-9377 [2] BOLT (3/8-16X2.25-IN)  
6. 6V-8801 [2] NUT (3/8-16-THD)  
7. 7X-0602 [2] WASHER-HARD (10X38X1.6-MM THK)  
8. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
9. 8X-5733 [1] PLATE  
10. 5P-2424 [2] BOLT (1/2-13X2.25-IN)  
11. 7I-4749 [2] BAR  
12. 8X-5732 [1] PLATE  
13. 8T-9391 [4] BOLT (1/2-13X3.75-IN)  
14. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8D-3786 [2] MOUNTING  
16. 6V-6563 [2] WASHER (13.5X40X5-MM THK)  
17. 6V-8188 [2] NUT (1/2-13-THD)  
18. 5P-8502 [1] PADLOCK GP  
  5P-8500 A [1] KEY  
  8Y-6364 A [1] SLEEVE  
19. 7I-4750 [4] SPACER (15.5X44.5X14-MM THK)  
20. 1R-0722 [1] FILTER ELEMENT AS-OIL (STANDARD EFFICIENCY)  
  A   NOT PART OF THIS GROUP
  Y   SEPARATE ILLUSTRATION
 

#SEBP25390511
 

112-5495: UNIVERSAL JOINT GP-PUMP DRIVE

112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
S/N 5FM477-UP
PART OF 7D-9600 SHAFT GP-PUMP DRIVE
i00491052 SEBP2539
1125495 UNIVERSAL JOINT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5T-1362 [2] SPIDER & BEARING AS  
2. 6G-4357 [1] YOKE AS-SLIP  
3. 027-1287 [1] FITTING-GREASE (PUMP DRIVE)  
4. 9K-2721 [2] LOCKWASHER  
5. 6G-6623 [1] SEAL  
6. 5H-3593 [1] RETAINER-FELT  
7. 6G-4358 [1] YOKE  
8. 0L-0478 [8] BOLT (3/8-24X1.75-IN)  
 

#SEBP25390512
 

5Y-0769: UNIVERSAL JOINT GP-PUMP DRIVE

5Y-0769 UNIVERSAL JOINT GP-PUMP DRIVE
S/N 5FM1-476
PART OF 7D-9600 SHAFT GP-PUMP DRIVE
i00125215 SEBP2539
5Y0769 UNIVERSAL JOINT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5Y-0766 [1] YOKE AS-SLIP  
2. 2Y-5755 [3] FITTING  
3. 5Y-0768 [1] YOKE  
4. 5Y-0767 [2] BEARING  
 

#SEBP25390513
 

112-6795: VALVE & LINKAGE GP

112-6795 VALVE & LINKAGE GP -4-BANK, RH; 2-BANK, LH
S/N 5FM1-UP
PART OF 112-4105 BLADE AR
i00125804 SEBP2539
1126795 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 104-8672 Y [1] VALVE GP-BANK 2 (LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 6V-8186 [12] NUT-FULL (5/16-24-THD)  
  7H-3641 [12] END-ROD (5/16-24-THD)  
  8X-4276 [6] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 8D-8852 [2] SPACER (0.78X1.5X1.344-IN THK)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [10] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [6] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [12] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [12] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [8] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
21. 2G-6751 [1] KNOB-CIRCLE DRIVE  
22. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
23. 2G-6756 [1] KNOB-WHEEL LEAN  
24. 2G-6752 [1] KNOB-ARTICULATION  
25. 2G-6755 [1] KNOB-CENTERSHIFT  
26. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
27. 9M-1853 [6] MOUNTING  
28. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
30. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 104-7429 [2] PLATE  
32. 137-4516 [1] SHAFT  
33. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
34. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
35. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
36. 6V-8188 [2] NUT (1/2-13-THD)  
37. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
38. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
39. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
40. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25390514
 

112-6799: VALVE & LINKAGE GP

112-6799 VALVE & LINKAGE GP -4-BANK, RH; 3-BANK, LH
S/N 5FM1-UP
AN ATTACHMENT
i00125805 SEBP2539
1126799 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 104-8673 Y [1] VALVE GP-BANK 3 (LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 6V-8186 [14] NUT-FULL (5/16-24-THD)  
  7H-3641 [14] END-ROD (5/16-24-THD)  
  8X-4276 [7] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 8D-8852 [1] SPACER (0.78X1.5X1.344-IN THK)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [10] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [14] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [14] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [8] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
22. 2G-6751 [1] KNOB-CIRCLE DRIVE  
23. 2G-6748 [1] KNOB-BLADE LIFT  
24. 2G-6756 [1] KNOB-WHEEL LEAN (RH)  
25. 2G-6752 [1] KNOB-ARTICULATION  
26. 2G-6755 [1] KNOB-CENTERSHIFT  
27. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
28. 9M-1853 [6] MOUNTING  
29. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
30. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7429 [2] PLATE  
33. 137-4516 [1] SHAFT  
34. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
35. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
36. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
37. 6V-8188 [2] NUT (1/2-13-THD)  
38. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 8D-5633 [1] LEVER (SIDE SHIFT)  
41. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
42. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25390515
 

112-6804: VALVE & LINKAGE GP

112-6804 VALVE & LINKAGE GP -4-BANK, RH; 3-BANK, LH
S/N 5FM1-UP
AN ATTACHMENT
i00125806 SEBP2539
1126804 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 112-2580 Y [1] VALVE GP-BANK 3 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 6V-8186 [14] NUT-FULL (5/16-24-THD)  
  7H-3641 [14] END-ROD (5/16-24-THD)  
  8X-4276 [7] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 8D-8852 [2] SPACER (0.78X1.5X1.344-IN THK)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [7] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [14] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [14] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
21. 2G-6751 [1] KNOB-CIRCLE DRIVE  
22. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
23. 2G-6756 [1] KNOB-WHEEL LEAN  
24. 2G-6752 [1] KNOB-ARTICULATION  
25. 2G-6755 [1] KNOB-CENTERSHIFT  
26. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
27. 9M-1853 [6] MOUNTING  
28. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
30. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 104-7429 [2] PLATE  
32. 137-4516 [1] SHAFT  
33. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
34. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
35. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
36. 6V-8188 [2] NUT (1/2-13-THD)  
37. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
38. 2G-6753 [1] KNOB-SCARIFIER  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 101-2457 [1] LEVER (SCARIFER)  
41. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
42. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25390516
 

112-6818: VALVE & LINKAGE GP

112-6818 VALVE & LINKAGE GP -4-BANK, RH; 3-BANK, LH
S/N 5FM1-UP
PART OF 112-6871 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00125807 SEBP2539
1126818 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 112-2581 Y [1] VALVE GP-BANK 3 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (RIPPER)  
5. 8D-5634 [1] LEVER (LH BLADE LIFT)  
6. 8X-4276 [7] ROD  
7. 6V-8186 [2] NUT-FULL (5/16-24-THD)  
8. 7H-3641 [2] END-ROD (5/16-24-THD)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [7] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [14] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [14] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
21. 2G-6751 [1] KNOB-CIRCLE DRIVE  
22. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
23. 2G-6756 [1] KNOB-WHEEL LEAN  
24. 2G-6752 [1] KNOB-ARTICULATION  
25. 2G-6755 [1] KNOB-CENTERSHIFT  
26. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
27. 9M-1853 [6] MOUNTING  
28. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-7740 [1] PLATE AS (LH)  
30. 104-7419 [1] PLATE AS (RH)  
    (EACH PLATE AS INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 104-7429 [2] PLATE  
32. 137-4516 [1] SHAFT  
33. 2G-6740 [1] KNOB-RIPPER  
34. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
35. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
36. 6V-8188 [2] NUT (1/2-13-THD)  
37. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
38. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 8D-5633 [1] LEVER (WHEEL LEAN)  
41. 8D-8852 [2] SPACER (0.78X1.5X1.344-IN THK)  
42. 101-2457 [1] LEVER (ARTICULATION)  
43. 8D-5634 [1] LEVER (CENTER SHIFT)  
44. 8D-5632 [1] LEVER (RH BLADE LIFT)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25390517
 

115-0804: VALVE & LINKAGE GP

115-0804 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N 5FM1-UP
AN ATTACHMENT
i00125872 SEBP2539
1150804 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 124-3328 Y [1] VALVE GP-BANK 5 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 6V-8186 [18] NUT-FULL (5/16-24-THD)  
  7H-3641 [18] END-ROD (5/16-24-THD)  
  8X-4276 [9] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [18] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 2G-6753 [1] KNOB-SCARIFIER  
41. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
42. 101-2457 [1] LEVER (SCARIFIER)  
43. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
44. 8D-5633 [1] LEVER (SIDE SHIFT)  
45. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25390518
 

115-0808: VALVE & LINKAGE GP

115-0808 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N 5FM1-UP
RIPPER
PART OF 115-1002 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00125873 SEBP2539
1150808 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 124-3329 Y [1] VALVE GP-BANK 5 (LH)(LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 6V-8186 [18] NUT-FULL (5/16-24-THD)  
  7H-3641 [18] END-ROD (5/16-24-THD)  
  8X-4276 [9] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [18] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 2G-6740 [1] KNOB-RIPPER  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
41. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
42. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
43. 8D-5633 [1] LEVER (SIDE SHIFT)  
44. 101-2457 [1] LEVER (RIPPER)  
45. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP25390519
 

115-0810: VALVE & LINKAGE GP

115-0810 VALVE & LINKAGE GP -5-BANK, RH, LH
S/N 5FM1-UP
AN ATTACHMENT
i00125874 SEBP2539
1150810 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-5499 [2] RETAINER  
2. 101-2457 [1] LEVER (ARTICULATION)  
3. 8D-5634 [1] LEVER (CENTER SHIFT)  
4. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
5. 8W-0456 [1] SHAFT  
6. 6V-8186 [20] NUT-FULL (5/16-24-THD)  
  7H-3641 [20] END-ROD (5/16-24-THD)  
  8X-4276 [10] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (PLOW & BULLDOZER LIFT)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [12] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [20] LOCKWASHER  
16. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [10] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 2G-6753 [1] KNOB-SCARIFIER  
36. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
37. 6V-8188 [2] NUT (1/2-13-THD)  
38. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
39. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
40. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
41. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
42. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
43. 124-3326 Y [1] VALVE GP-BANK 5 (RH)  
44. 124-3328 Y [1] VALVE GP-BANK 5 (LH)  
45. 101-2457 [1] LEVER (SCARIFIER)  
46. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
47. 8D-5633 [1] LEVER (SIDE SHIFT)  
48. 101-2458 [1] LEVER (BLADE TIP)  
49. 8D-5632 [1] LEVER (CENTER SHIFT)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 120H :

TANK & MTG GP-HYDRAULIC
214-1983 TANK & MTG GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
9T-7984 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
214-1984 TANK & FILTER GP-HYDRAULIC
SWIVEL GP
9T-5604 SWIVEL GP
SWIVEL GP
260-6502 SWIVEL GP
SWIVEL GP
260-6502 SWIVEL GP
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
SHAFT GP-PUMP DRIVE
7D-9600 SHAFT GP-PUMP DRIVE
UNIVERSAL JOINT GP-PUMP DRIVE
112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
UNIVERSAL JOINT GP-PUMP DRIVE
5Y-0769 UNIVERSAL JOINT GP-PUMP DRIVE
VALVE & LINKAGE GP
112-6795 VALVE & LINKAGE GP
VALVE & LINKAGE GP
112-6799 VALVE & LINKAGE GP
VALVE & LINKAGE GP
112-6804 VALVE & LINKAGE GP
VALVE & LINKAGE GP
112-6818 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0804 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0808 VALVE & LINKAGE GP

Truck sale:

Caterpillar 120H
 
Caterpillar 120H
- motor graders
CAVPOWER
 
105,000 
Caterpillar 120H, motor graders, Construction


 
105,000 
Caterpillar 120H, motor graders, Construction


Caterpillar 120H, motor graders, Construction
105,000 
Caterpillar 120H, motor graders, Construction

RING POWER CORP.
Caterpillar 120H, motorgrader mijnbouw, Bouw
 
Caterpillar 120H, motorgrader mijnbouw, Bouw

CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.