AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8W-5595 CONSOLE GP-OPERATOR -TRANSMISSION DIRECTION, SPEED S/N 5FM2567-UP PART OF 112-4103 CHASSIS AR 120H


OPERATOR STATION
CONSOLE GP
CONTROL GP
CONTROL GP-STEERING
DOOR GP

MOTOR GRADER 120H MOTOR GRADER 5FM
 120H Motor Grader 5FM00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2539 120H 5FM   (1996)

OPERATOR STATION

CONSOLE GP
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8X-2330 CONSOLE GP-OPERATOR
 

#SEBP25390610
 

8W-5595: CONSOLE GP-OPERATOR

8W-5595 CONSOLE GP-OPERATOR -TRANSMISSION DIRECTION, SPEED
S/N 5FM2567-UP
PART OF 112-4103 CHASSIS AR
i01748429 SEBP2539
8W5595 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-9288 [1] COVER  
2. 143-9290 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
3. 198-7654 [1] PLATE AS  
  6V-9632 M [14] NUT-WELD (M6X1-THD)  
  7T-1099 [1] LINK  
  8D-3508 [2] BOSS (3/8-16X1-IN)  
5. 8X-5680 [1] FILM-PANEL (SHIFT PATTERN)  
6. 180-3531 C [1] CONTROL GP-TRANSMISSION  
7. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
8. 9X-2043 M [10] SCREW-TRUSS HEAD (M6X1X14-MM)  
9. 8X-4879 [2] BRACKET AS  
    (EACH INCLUDES)
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
10. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
11. 143-9286 [1] COVER  
12. 9X-2041 M [10] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
13. 8X-8096 [1] FILM-COVER  
15. 105-8681 [1] GATE AS  
16. 7M-0706 [1] KNOB  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP25390611
 

8X-2330: CONSOLE GP-OPERATOR

8X-2330 CONSOLE GP-OPERATOR
S/N 5FM1-UP
PART OF 112-4103 CHASSIS AR
i00125498 SEBP2539
8X2330 CONSOLE GP-OPERATOR Parts scheme 8X2330 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-3676 [1] BASE  
2. 8X-1917 [1] CHANNEL AS  
3. 034-1994 [1] PIN  
4. 3B-4607 [2] PIN-COTTER  
5. 236-0737 [1] CYLINDER  
6. 6J-0488 [4] SCREW-BUTTON HEAD (3/8-16X0.875-IN)  
7. 8X-1921 [1] HOOD  
8. 8X-3789 [1] PANEL  
9. 2A-7184 [2] PLATE  
10. 8C-3442 [1] SPRING-COIL  
11. 2K-7979 [13] BUSHING  
12. 9X-2042 M [12] SCREW-TRUSS HEAD (M6X1X12-MM)  
13. 169-3679 [1] CHANNEL AS  
14. 8X-1908 [1] PANEL  
15. 8X-1911 [1] PANEL  
16. 8X-2160 [1] LEVER  
17. 8X-3951 [1] PANEL  
18. 5M-8500 [1] KNOB (STEERING WHEEL TILT)  
19. 123-1201 [1] PLATE  
20. 8D-7960 [2] PLATE  
21. 096-6166 [6] WASHER-HARD (4.5X9X1-MM THK)  
22. 3E-9865 [1] LOCKNUT (1/4-20-THD)  
23. 3Y-2806 [1] SPRING  
24. 8X-1904 [1] SPACER (20X35X26-MM THK)  
25. 6G-8814 [2] BRACKET  
26. 8X-1907 [1] SHAFT  
27. 8T-4133 M [1] NUT (M10X1.5-THD)  
28. 8T-2561 [11] WASHER-HARD (10.5X28.5X5-MM THK)  
29. 2G-8572 [8] WASHER-SPECIAL  
30. 2G-8573 [8] CAP  
31. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
32. 8X-5123 [1] RETAINER  
33. 8X-2161 [1] LEVER (COLUMN TILT)  
34. 9M-5590 [1] BALL  
35. 5C-8312 M [6] NUT (M4X0.7-THD)  
36. 110-6241 [1] BRACKET  
37. 206-4097 [8] FASTENER  
38. 8X-1913 [6] SPACER (10.5X32X19.5-MM THK)  
39. 3K-6060 [6] LOCKNUT (3/8-16-THD)  
40. 9X-1046 M [14] SCREW (M4X0.7X18-MM)  
41. 8X-2893 M [10] NUT (M4X0.7-THD)  
42. 031-2666 [1] ROD  
43. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
44. 8X-1914 [1] SHAFT  
46. 2K-5830 [2] BEARING AS-NEEDLE  
47. 206-9651 [1] PLATE  
48. 4L-6454 [4] BOLT (3/8-16X1-IN)  
49. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
50. 8X-3965 [1] RATCHET  
51. 3F-7514 [4] PIN  
52. 8T-9006 M [2] BOLT-SOCKET HEAD (M3X0.5X20-MM)  
53. 4B-4314 [1] RIVET  
54. 5S-7383 [6] BOLT (3/8-16X1.75-IN)  
55. 6G-2914 [1] LATCH  
56. 7I-4890 [1] PLATE AS  
57. 8L-7905 [2] RIVET-POP  
58. 8D-5641 B [14] BEARING  
59. 8T-1174 [4] SEAL-LIP TYPE  
60. 5P-5637 BD SEAL  
61. 030-8535 [1] BOLT-LOCKING (3/8-16X0.875-IN)  
62. 5P-5639 BD SEAL  
63. 174-8131 M [2] SCREW-TRUSS HEAD (M4X0.7X12-MM)  
64. 6L-1962 [1] NUT-JAM (3/8-24-THD)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP25390612
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH
S/N 5FM1-939
INCHING PEDAL
PART OF 112-4103 CHASSIS AR
i00126212 SEBP2539
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 8X-2498 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 145-9077 [1] ROD  
18. 4J-8922 [2] ROD END (3/8-24-THD)  
19. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3K-8280 [1] PIN-CLEVIS  
22. 7V-0446 [2] CLIP  
23. 9X-5694 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [2] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [3] NUT (5/8-18-THD)  
29. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
30. 3D-4004 [1] SEAL-QUAD RING  
31. 133-9185 [1] ADAPTER  
32. 7M-8485 [1] SEAL-O-RING  
33. 7D-9212 [1] SPRING  
34. 6P-5442 [2] PLUG  
35. 136-5160 [1] COUPLER  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 8X-7665 [1] BRACKET  
40. 1D-1313 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 6J-1889 [1] SEAL-U-CUP  
44. 9J-8783 [1] SHIM (0.508-MM THK)  
45. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP25390613
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH
S/N 5FM940-1841
INCHING PEDAL
PART OF 112-4103 CHASSIS AR
i01091928 SEBP2539
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 8X-2498 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 145-9077 [1] ROD  
18. 4J-8922 [2] ROD END (3/8-24-THD)  
19. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3H-8538 C [1] PIN  
22. 7V-0446 [2] CLIP  
23. 144-5323 C [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 C [1] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 C [2] NUT (5/8-18-THD)  
29. 8T-4122 C [1] WASHER-HARD (17X32X3.5-MM THK)  
30. 5D-6539 C [1] SEAL-O-RING  
31. 9X-6578 C [1] NUT-FACE SEAL (1-11/16-12-THD)  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 147-7238 C [1] BRACKET  
40. 149-2065 C [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 8T-4896 C [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 9J-8783 [1] SHIM (0.508-MM THK)  
45. 9G-9154 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25390614
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH
S/N 5FM1842-2708
INCHING PEDAL
PART OF 112-4103 CHASSIS AR
i01451582 SEBP2539
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 207-4922 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 169-0922 C [1] ROD  
18. 4J-8922 C [1] ROD END (3/8-24-THD)  
19. 6V-8183 C [1] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3H-8538 [1] PIN  
22. 7V-0446 [2] CLIP  
23. 144-5323 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [1] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [2] NUT (5/8-18-THD)  
29. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
30. 5D-6539 [1] SEAL-O-RING  
31. 9X-6578 [1] NUT-FACE SEAL (1-11/16-12-THD)  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 147-7238 [1] BRACKET  
40. 149-2065 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 9J-8783 [1] SHIM (0.508-MM THK)  
45. 9G-9154 [1] CLIP  
46. 169-0921 C [1] ROD END (3/8-24 LH-THD)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25390615
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH
S/N 5FM2709-UP
INCHING PEDAL
PART OF 112-4103 CHASSIS AR
i01901503 SEBP2539
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 207-4922 C [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 169-0922 [1] ROD  
18. 4J-8922 [1] ROD END (3/8-24-THD)  
19. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3H-8538 [1] PIN  
22. 7V-0446 [2] CLIP  
23. 144-5323 [1] CABLE AS  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [1] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [2] NUT (5/8-18-THD)  
29. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
30. 5D-6539 [1] SEAL-O-RING  
31. 9X-6578 [1] NUT-FACE SEAL (1-11/16-12-THD)  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 147-7238 [1] BRACKET  
40. 149-2065 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 9J-8783 [1] SHIM (0.508-MM THK)  
45. 9G-9154 [1] CLIP  
46. 169-0921 [1] ROD END (3/8-24 LH-THD)  
47. 1V-6341 [1] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25390616
 

7I-4718: CONTROL GP-STEERING

7I-4718 CONTROL GP-STEERING
S/N 5FM1-UP
PART OF 112-4103 CHASSIS AR
Type 1
i00125339 SEBP2539
7I4718 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-1501 Y [1] PUMP GP-METERING (HMU)  
2. 384-5820 [1] WHEEL AS  
3. 144-6695 [1] NUT (13/16-20-THD)  
4. 6V-7692 [4] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25390617
 

7I-4718: CONTROL GP-STEERING

7I-4718 CONTROL GP-STEERING
S/N 5FM1-UP
PART OF 112-4103 CHASSIS AR
Type 2
i01966115 SEBP2539
7I4718 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 222-3769 CJ [1] PUMP GP-METERING (HMU)  
2. 092-3200 [1] STEERING WHEEL  
3. 144-6695 [1] NUT (13/16-20-THD)  
4. 118-9573 M [4] BOLT-12 POINT HEAD (M10X1.5X35-MM)  
   
    AVAILABLE REPAIR KIT(S):
  257-8471 J [1] KIT-SEAL (HMU)  
    (INCLUDES SEALS & INSTALLATION TOOL)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP25390618
 

266-7031: DOOR GP-CAB

266-7031 DOOR GP-CAB
S/N 5FM1-UP
Type 1
i06093095 SEBP2539
2667031 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-3915 B [4] SHIM (1.52-MM THK)  
2. 5T-7486 [1] RETAINER-SPRING  
3. 6D-6581 [14] RIVET-POP  
4. 6V-2773 [2] PLUG  
5. 6V-7636 [4] PIN AS-SPRING  
6. 8X-4066 [1] HINGE  
8. 8X-4262 [1] COVER (RH)  
11. 8Y-4398 [1] LINK-CONNECTING  
12. 8Y-4620 [1] LINK-CONNECTING  
13. 8Y-4801 [1] LOCK AS-CYLINDER  
  226-0295 [1] LOCK AS  
  226-0342 [1] CAM  
14. 8Y-6385 [1] SHIELD-STRIKER  
15. 9X-2546 M [4] BOLT (M6X1X20-MM)  
16. 106-6553 [2] BUMPER-CONICAL  
17. 107-9641 [1] PLATE AS  
18. 108-5950 [1] LATCH AS  
19. 108-5952 [1] LINK (RH)  
20. 114-9190 [1] SEAL  
21. 117-1963 [1] PLATE AS  
22. 128-0037 [1] KNOB-BALL  
23. 199-2677 [1] LINK (RELEASE)  
24. 199-2712 [1] HANDLE  
25. 282-8470 [1] DOOR AS-ACCESS (RH)  
  6V-9632 M [10] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
26. 282-9436 [1] SPACER  
27. 282-9437 [1] PLATE  
28. 8Y-4400 [1] LATCH AS-DOOR  
29. 296-4298 [1] HANDLE AS-DOOR (OUTSIDE)  
30. 296-4303 [1] HANDLE AS-DOOR (INSIDE)  
31. 1H-3338 [1] LOCKWASHER (EXTERNAL TOOTH)  
32. 230-8993 M [2] SCREW-FLAT HEAD (M6X1X12-MM)  
33. 321-5918 [1] PLUG-BUTTON  
34. 8C-8454 M [14] SCREW-MACHINE (M6X1X20-MM)  
35. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [2] NUT (M10X1.5-THD)  
37. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
38. 8T-4157 [1] STRIKER AS  
  8T-4158 [1] WASHER-SPECIAL  
39. 8T-4181 M [6] BOLT (M6X1X20-MM)  
40. 8X-4245 M [1] BOSS (M6X1X18-MM)  
41. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
42. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
43. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
44. 5P-5969 D SEAL (1.5-M)  
45. 5P-5768 D SEAL (2.4-M)  
45A. 5P-5768 D SEAL (2.8-M)  
46. 122-2228 E SEAL (172-CM)  
47. 178-8894 E SEAL (340-CM)  
48. 308-2025 [1] COVER (RH)  
49. 308-7592 [1] GLASS  
50. 308-7593 [1] GLASS  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP25390619
 

266-7031: DOOR GP-CAB

266-7031 DOOR GP-CAB
S/N 5FM1-UP
Type 2
i06093090 SEBP2539
2667031 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-3915 B [4] SHIM (1.52-MM THK)  
2. 5T-7486 [1] RETAINER-SPRING  
4. 6V-2773 C [2] PLUG  
5. 6V-7636 [4] PIN AS-SPRING  
8. 487-5655 [1] COVER (RH)  
11. 8Y-4398 [1] LINK-CONNECTING  
12. 8Y-4620 [1] LINK-CONNECTING  
13. 8Y-4801 [1] LOCK AS-CYLINDER  
  226-0295 J [1] LOCK AS  
  226-0342 [1] CAM  
14. 8Y-6385 [1] SHIELD-STRIKER  
15. 9X-2546 M [4] BOLT (M6X1X20-MM)  
16. 106-6553 [2] BUMPER-CONICAL  
17. 107-9641 [1] PLATE AS  
18. 108-5950 [1] LATCH AS  
19. 108-5952 [1] LINK (RH)  
20. 114-9190 [1] SEAL  
21. 117-1963 [1] PLATE AS  
22. 128-0037 [1] KNOB-BALL  
23. 199-2677 [1] LINK (RELEASE)  
24. 199-2712 [1] HANDLE  
25. 487-6629 [1] DOOR AS-CAB  
  6D-6581 [14] RIVET-POP  
  8X-4066 [1] HINGE  
27. 282-9437 [1] PLATE  
28. 8Y-4400 [1] LATCH AS-DOOR  
29. 296-4298 [1] HANDLE AS-DOOR (OUTSIDE)  
  3V-4694 [2] PLUG-BUTTON  
30. 296-4303 [1] HANDLE AS-DOOR (INSIDE)  
31. 1H-3338 [1] LOCKWASHER (EXTERNAL TOOTH)  
32. 230-8993 M [2] SCREW-FLAT HEAD (M6X1X12-MM)  
33. 321-5918 C [1] PLUG-BUTTON  
34. 8C-8454 M [14] SCREW-MACHINE (M6X1X20-MM)  
35. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
36. 8T-4133 M [2] NUT (M10X1.5-THD)  
37. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
38. 8T-4157 [1] STRIKER AS  
  8T-4158 [1] WASHER-SPECIAL  
39. 8T-4181 M [6] BOLT (M6X1X20-MM)  
40. 8X-4245 M [1] BOSS (M6X1X18-MM)  
41. 9X-2042 M [7] SCREW-TRUSS HEAD (M6X1X12-MM)  
42. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
43. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
44. 5P-5969 CD SEAL (3-M)  
45. 5P-5768 CD SEAL (2.5-M)  
45A. 5P-5768 CD SEAL (2.8-M)  
46. 122-2228 E SEAL (148-CM)  
47. 178-8894 E SEAL (305-CM)  
48. 308-2025 [1] COVER (RH)  
49. 308-7592 [1] GLASS (LOWER)  
50. 308-7593 [1] GLASS (UPPER)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 120H :

CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CANOPY GP
130-2886 CANOPY GP
129-7230 CANOPY AR
130-4564 CAB GP
130-4563 CAB GP
129-7229 CAB AR
129-7228 CAB AR
CONSOLE GP-OPERATOR
8X-2330 CONSOLE GP-OPERATOR
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-STEERING
7I-4718 CONTROL GP-STEERING
CONTROL GP-STEERING
7I-4718 CONTROL GP-STEERING
DOOR GP-CAB
266-7031 DOOR GP-CAB

Truck sale:

Caterpillar 120H
 
Caterpillar 120H
- motor graders
CAVPOWER
 
105,000 
Caterpillar 120H, motor graders, Construction


 
105,000 
Caterpillar 120H, motor graders, Construction


Caterpillar 120H, motor graders, Construction
105,000 
Caterpillar 120H, motor graders, Construction

RING POWER CORP.
Caterpillar 120H, motorgrader mijnbouw, Bouw
 
Caterpillar 120H, motorgrader mijnbouw, Bouw

CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.