BASIC ENGINE
GEAR GPHOUSING GP-FLYWHEEL
GEAR GP
CYLINDER HEAD GP
HOUSING GP-FRONT
BASIC ENGINE
GEAR GP
#SEBP25400040
111-8001: GEAR GP-FRONT
111-8001 GEAR GP-FRONT
S/N 6NC1-33951; 08Z96238-99999; 10Z46473-UP
PART OF 110-5760 ENGINE AR, 274-3980 ENGINE AR-COMPLETE
S/N 6NC1-33951; 08Z96238-99999; 10Z46473-UP
PART OF 110-5760 ENGINE AR, 274-3980 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8636 | [1] | GEAR-DRIVE (66 TEETH) | |
| 2. | 7N-2994 | [1] | WASHER (49.3X16.25X12.3-MM THK) | |
| 3. | 8N-4960 | [1] | PLATE-THRUST | |
| 4. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 5. | 170-7502 | [1] | SHAFT-DRIVE IDLER | |
| 6. | 0S-1748 | [4] | BOLT (3/8-24X2-IN) | |
| 7. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 8. | 196-0224 | [1] | GEAR AS-IDLER (50-TEETH) | |
| 196-9988 | [1] | BUSHING | ||
| 9. | 4P-7826 | [1] | GEAR-CAMSHAFT (66-TEETH) | |
| 10. | 1A-1135 | [1] | BOLT (5/8-11X2-IN) | |
| 11. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 12. | 196-0028 | [1] | GEAR AS-IDLER (47-TEETH) | |
| 195-0302 | [1] | BUSHING | ||
| 13. | 5B-9079 | [1] | NUT-JAM (3/8-24-THD) |
#SEBP25400041
1W-5634: GEAR GP-FRONT
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1A-1135 | [1] | BOLT (5/8-11X2-IN) | |
| 7N-2994 | [1] | WASHER (49.3X16.25X12.3-MM THK) | ||
| 2. | 7W-0508 | [1] | GEAR-FUEL PUMP DRIVE (80-TEETH) | |
| 3. | 0S-1594 C | [2] | BOLT (3/8-16X1-IN) | |
| 5M-2894 C | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 4. | 106-4497 C | [1] | GEAR AS-FUEL PUMP IDLER (57-TEETH) | |
| 2S-6692 C | [1] | BUSHING | ||
| 5. | 5B-9079 | [1] | NUT-JAM (3/8-24-THD) | |
| 6. | 1W-4402 | [1] | GEAR-CAMSHAFT (80-TEETH) | |
| 7. | 105-9772 | [1] | SHAFT-DRIVE IDLER | |
| 8. | 8N-4960 | [1] | PLATE-THRUST | |
| 9. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 10. | 7N-4722 | [1] | GEAR AS-IDLER (60-TEETH) | |
| 2P-1168 | [1] | BUSHING | ||
| 11. | 0S-1748 | [4] | BOLT (3/8-24X2-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP25400042
7E-5681: HOUSING GP-FLYWHEEL
7E-5681 HOUSING GP-FLYWHEEL
S/N 6NC1-33951; 8TD10000-99999; 08Z96238-99999; 10Z46473-UP
PART OF 110-5760, 116-2890 ENGINE AR, 274-3980 ENGINE AR-COMPLETE
S/N 6NC1-33951; 8TD10000-99999; 08Z96238-99999; 10Z46473-UP
PART OF 110-5760, 116-2890 ENGINE AR, 274-3980 ENGINE AR-COMPLETE
For full view, you need register
#SEBP25400043
8N-0303: HOUSING GP-FRONT
8N-0303 HOUSING GP-FRONT
S/N 6NC1-33951; 8TD10000-99999; 08Z96238-99999; 10Z46473-UP
PART OF 110-5760, 116-2890 ENGINE AR, 274-3980 ENGINE AR-COMPLETE
S/N 6NC1-33951; 8TD10000-99999; 08Z96238-99999; 10Z46473-UP
PART OF 110-5760, 116-2890 ENGINE AR, 274-3980 ENGINE AR-COMPLETE
For full view, you need register
#SEBP25400044
398-9357: KIT-CYLINDER HEAD
398-9357 KIT-CYLINDER HEAD
S/N 4ER1-UP
OPTIONAL REBUILD CYLINDER HEAD REBUILD KIT FOR 3306 ENGINE
FOR USE WITH @@@@@274-3980@@@@@, @@@@@110-5760@@@@@
FIELD INSTALLATION
S/N 4ER1-UP
OPTIONAL REBUILD CYLINDER HEAD REBUILD KIT FOR 3306 ENGINE
FOR USE WITH @@@@@274-3980@@@@@, @@@@@110-5760@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 148-7425 | [12] | GUIDE-VALVE (STANDARD) | ||
| 154-6997 AB | GUIDE-VALVE (0.51-MM OS) | |||
| 154-6998 AB | GUIDE-VALVE (0.13-MM OS) | |||
| 107-0265 | [6] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | ||
| AB | INSERT-VALVE SEAT (0.13-MM OS, EXHAUST) | |||
| AB | INSERT-VALVE SEAT (0.25-MM OS, EXHAUST) | |||
| AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
| AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
| 107-0268 | [6] | INSERT-VALVE SEAT (INLET)(STANDARD) | ||
| AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
| AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
| AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
| AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
| 2A-4429 | [24] | LOCK-RETAINER | ||
| 8T-6762 | [3] | PLUG-PIPE (1/2-14-THD) | ||
| 8T-6763 | [1] | PLUG-PIPE (1/4-18-THD) | ||
| 1W-5300 | [12] | ROTOCOIL AS | ||
| (EACH INCLUDES) | ||||
| 6N-7174 | [1] | SHIELD-OIL | ||
| 7N-8018 | [6] | SEAL | ||
| 9Y-1798 | [18] | SEAL | ||
| 3S-5496 | [2] | SEAL-O-RING | ||
| 7S-7144 | [12] | SPRING-VALVE | ||
| 148-7455 | [6] | VALVE-EXHAUST | ||
| 100-7860 | [6] | VALVE-INLET | ||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
#SEBP25400045
391-8256: KIT-CYLINDER HEAD GASKET
391-8256 KIT-CYLINDER HEAD GASKET
S/N 6NC1-UP; 8TD10000-99999; 08Z96238-99999; 10Z46473-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. INCLUDES THE TURBO GASKETS BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY.. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC.. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750 & UP
FOR USE WITH @@@@@110-5760@@@@@, @@@@@274-3980@@@@@
FIELD INSTALLATION
S/N 6NC1-UP; 8TD10000-99999; 08Z96238-99999; 10Z46473-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. INCLUDES THE TURBO GASKETS BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY.. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC.. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750 & UP
FOR USE WITH @@@@@110-5760@@@@@, @@@@@274-3980@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8M-2295 | [4] | BOLT (3/8-16X1.625-IN) | ||
| 1H-7666 | [1] | GASKET | ||
| 1P-0451 | [1] | GASKET (TURBOCHARGER) | ||
| 1S-4295 | [1] | GASKET (TURBOCHARGER) | ||
| 5S-6735 | [2] | GASKET | ||
| 7N-0200 | [1] | GASKET | ||
| 7N-0944 | [1] | GASKET (WATER TEMPERATURE REGULATOR) | ||
| 8H-9788 | [1] | GASKET | ||
| 188-6126 | [1] | GASKET | ||
| 111-8015 | [1] | GASKET AS-CYLINDER HEAD | ||
| 2P-6132 | [1] | GASKET-ELBOW | ||
| 9S-7083 | [1] | GASKET-INLET | ||
| 9Y-1979 | [3] | GASKET-MANIFOLD | ||
| 1S-4810 | [1] | GASKET-OIL DRAIN | ||
| 1S-6595 | [1] | GASKET-OIL SUPPLY | ||
| 115-7550 | [1] | GASKET-PLATE | ||
| 2N-2766 | [4] | LOCKNUT (3/8-16-THD) | ||
| 7N-8018 | [6] | SEAL | ||
| 9Y-1798 | [18] | SEAL | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 3S-5496 | [2] | SEAL-O-RING | ||
| 4L-8337 | [2] | SEAL-O-RING | ||
| 5M-5860 | [2] | SEAL-O-RING | ||
| 5H-7704 | [2] | SEAL-O-RING | ||
| 8H-2046 | [1] | SEAL-O-RING | ||
| 8M-4448 | [1] | SEAL-O-RING | ||
| 9M-4849 | [1] | SEAL-O-RING | ||
| 133-1247 | [1] | SEAL-VALVE COVER | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
| 8H-9204 | [6] | WASHER-FELT (19/32X7/8X5/16-IN THK) | ||
#SEBP25400046
391-8935: KIT-CYLINDER HEAD GASKET
391-8935 KIT-CYLINDER HEAD GASKET -SINGLE
S/N 4ER1-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER SINGLE INJECTOR SEAL KIT, AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY, THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED. BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC.. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
FOR USE WITH @@@@@110-5760@@@@@
FIELD INSTALLATION
S/N 4ER1-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER SINGLE INJECTOR SEAL KIT, AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY, THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED. BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC.. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
FOR USE WITH @@@@@110-5760@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1P-0451 | [1] | GASKET (TURBOCHARGER) | ||
| 5S-6735 | [2] | GASKET | ||
| 7M-7273 | [1] | GASKET (TURBOCHARGER) | ||
| 7N-0200 | [1] | GASKET | ||
| 7N-0944 | [1] | GASKET (WATER TEMPERATURE REGULATOR) | ||
| 8H-9788 | [1] | GASKET | ||
| 188-6126 | [1] | GASKET | ||
| 111-8015 | [1] | GASKET AS-CYLINDER HEAD | ||
| 2P-6132 | [1] | GASKET-ELBOW | ||
| 9Y-1979 | [3] | GASKET-MANIFOLD | ||
| 1P-1255 | [1] | GASKET-OIL DRAIN | ||
| 1S-4810 | [2] | GASKET-OIL DRAIN (TURBOCHARGER) | ||
| 1S-6595 | [1] | GASKET-OIL SUPPLY | ||
| 115-7550 | [1] | GASKET-PLATE | ||
| 9N-3241 | [1] | GASKET-REGULATOR HOUSING | ||
| 7N-8018 | [6] | SEAL | ||
| 9Y-1798 | [18] | SEAL | ||
| 1H-1023 | [6] | SEAL-O-RING | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 3J-7354 | [3] | SEAL-O-RING | ||
| 3S-5496 | [2] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 8H-2046 | [1] | SEAL-O-RING | ||
| 8M-4448 | [1] | SEAL-O-RING | ||
| 9M-4849 | [1] | SEAL-O-RING | ||
| 133-1247 | [1] | SEAL-VALVE COVER | ||
| 8H-9204 | [6] | WASHER-FELT (19/32X7/8X5/16-IN THK) | ||
| FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
#SEBP25400047
392-0637: KIT-CYLINDER HEAD GASKET
392-0637 KIT-CYLINDER HEAD GASKET
S/N 4ER1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE
FIELD INSTALLATION
S/N 4ER1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE
FIELD INSTALLATION
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7L-6443 | [2] | BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN) | ||
| 9L-2295 | [2] | BOLT-HIGH TEMPERATURE (3/8-16X1.5-IN) | ||
| 1H-7666 | [1] | GASKET | ||
| 1P-0451 | [1] | GASKET | ||
| 5S-6735 | [2] | GASKET | ||
| 7N-0200 | [1] | GASKET | ||
| 7N-0944 | [1] | GASKET | ||
| 2F-7761 | [1] | GASKET | ||
| 188-6126 | [1] | GASKET | ||
| 111-8015 | [1] | GASKET AS-CYLINDER HEAD | ||
| 2P-6132 | [1] | GASKET-ELBOW | ||
| 9Y-1979 | [3] | GASKET-MANIFOLD | ||
| 1P-1255 | [1] | GASKET-OIL DRAIN | ||
| 115-7550 | [1] | GASKET-PLATE | ||
| 391-2167 | [4] | LOCKNUT-FLANGE (3/8X16-THD) | ||
| 6N-0009 | [1] | RING-METAL SEAL | ||
| 6N-0992 | [1] | RING-METAL SEAL | ||
| 7N-8018 | [6] | SEAL | ||
| 9Y-1798 | [18] | SEAL | ||
| 3K-0360 | [2] | SEAL-O-RING | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 3S-5496 | [2] | SEAL-O-RING | ||
| 8H-2046 | [1] | SEAL-O-RING | ||
| 8M-4448 | [1] | SEAL-O-RING | ||
| 133-1247 | [1] | SEAL-VALVE COVER | ||
| 8H-9204 | [6] | WASHER-FELT (19/32X7/8X5/16-IN THK) | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP25400048
447-8653: KIT-CYLINDER HEAD GASKET
447-8653 KIT-CYLINDER HEAD GASKET
S/N 4ER1-UP
CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAGE
FIELD INSTALLATION
S/N 4ER1-UP
CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAGE
FIELD INSTALLATION
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP25400049
398-2955: KIT-FRONT COVER GASKET
398-2955 KIT-FRONT COVER GASKET
S/N 6NC1-UP; 10Z46473-UP
CLASSIC. 673.1 X 322.6 X 25.4-MM
FIELD INSTALLATION
S/N 6NC1-UP; 10Z46473-UP
CLASSIC. 673.1 X 322.6 X 25.4-MM
FIELD INSTALLATION
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
Information:
BASIC ENGINE
GEAR GP
Engine News
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Disassembly and Assembly
Service Magazine
