AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

134-4208 MANIFOLD GP-EXHAUST S/N 10Z46473-UP PART OF 274-3980 ENGINE AR-COMPLETE 12H MOTOR GRADER


AIR INLET AND EXHAUST SYSTEM
MANIFOLD GP-EXHAUST
MUFFLER GP
EXHAUST GP
TURBOCHARGER GP
FUEL SYSTEM
CONTROL GP-FUEL RATIO
CONTROL GP-GOVERNOR

MOTOR GRADER 12H MOTOR GRADER 4ER
 12H Motor Grader 4ER00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2540 12H 4ER   (1996)

AIR INLET AND EXHAUST SYSTEM

MANIFOLD GP-EXHAUST
FASTENER GP-EXHAUST MANIFOLD
7E-5682 FASTENER GP-EXHAUST MANIFOLD
MANIFOLD GP-EXHAUST
134-4208 MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
2P-6572 MANIFOLD GP-EXHAUST
 

#SEBP25400110
 

134-4208: MANIFOLD GP-EXHAUST

134-4208 MANIFOLD GP-EXHAUST
S/N 10Z46473-UP
PART OF 274-3980 ENGINE AR-COMPLETE
i00509407 SEBP2540
1344208 MANIFOLD GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-7718 [1] MANIFOLD-EXHAUST (REAR)  
2. 134-4200 [1] MANIFOLD-EXHAUST (CENTER)  
3. 8S-7716 [1] MANIFOLD-EXHAUST (FRONT)  
4. 9Y-1979 [3] GASKET-MANIFOLD  
 

#SEBP25400111
 

2P-6572: MANIFOLD GP-EXHAUST

2P-6572 MANIFOLD GP-EXHAUST
S/N 6NC1-33951; 8TD10000-99999; 08Z96238-99999
PART OF 110-5760, 116-2890 ENGINE AR
i00125146 SEBP2540
2P6572 MANIFOLD GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-2355 [1] MANIFOLD-EXHAUST  
2. 1W-7964 C [6] GASKET-MANIFOLD  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP25400112
 

113-8511: MUFFLER & MOUNTING GP

113-8511 MUFFLER & MOUNTING GP
S/N 4ER1134-UP
PART OF 277-9643 INSTALLATION AR-ENGINE
i00125852 SEBP2540
1138511 MUFFLER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-5134 [1] SUPPORT  
2. 7E-8454 [1] BRACKET  
3. 262-2757 [1] MUFFLER  
4. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
5. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 4L-9337 [2] BOLT (3/8-16X1.5-IN)  
7. 5P-1075 [6] WASHER-HARD (10.2X22.5X3-MM THK)  
8. 1B-5355 [2] NUT-FULL (3/8-16-THD)  
9. 8T-2502 [4] BOLT (3/8-16X1.125-IN)  
 

#SEBP25400113
 

127-4930: MUFFLER GP

127-4930 MUFFLER GP
S/N 4ER1-1133
PART OF 112-5829, 116-2891 INSTALLATION AR-ENGINE
i00126185 SEBP2540
1274930 MUFFLER GP Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 127-0308 [1] MUFFLER AS  
2. 7N-1087 [1] CLAMP  
3. 0S-1619 [1] BOLT (3/8-16X3-IN)  
  1B-5355 [1] NUT-FULL (3/8-16-THD)  
  5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP25400114
 

2W-9093: PIPE GP-EXHAUST

2W-9093 PIPE GP-EXHAUST
S/N 8TD10000-99999; 4ER400-1133
PART OF 116-2890 ENGINE AR, 112-5829 INSTALLATION AR-ENGINE
FOR USE WITH NATURALLY ASPIRATED ENGINES
i00125156 SEBP2540
2W9093 PIPE GP-EXHAUST Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [4] BOLT (3/8-16X1.75-IN)  
  1B-5355 [4] NUT-FULL (3/8-16-THD)  
2. 2W-9094 [1] ADAPTER-EXHAUST  
 

#SEBP25400115
 

113-5340: TURBOCHARGER GP

113-5340 TURBOCHARGER GP
S/N 10Z46473-UP
PART OF 274-3980 ENGINE AR-COMPLETE
i00125831 SEBP2540
1135340 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-7919 Y [1] TURBOCHARGER GP  
2. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
3. 1P-0451 [1] GASKET  
4. 9L-2295 [2] BOLT-HIGH TEMPERATURE (3/8-16X1.5-IN)  
5. 7L-6443 [2] BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN)  
  5P-3931 BA COMPOUND-ANTI-SEIZE  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP25400116
 

113-7919: TURBOCHARGER GP

113-7919 TURBOCHARGER GP
S/N 10Z46473-UP
PART OF 113-5340 TURBOCHARGER GP
i00125850 SEBP2540
1137919 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-8315 [1] CARTRIDGE GP-TURBOCHARGER  
2. 113-8317 [1] COVER-COMPRESSOR  
3. 113-8316 [1] HOUSING  
4. 7C-9532 [1] CLAMP AS (TURBINE)  
5. 7C-9538 [1] CLAMP AS-COMPRESSOR  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP25400117
 

111-5162: CONTROL GP-FUEL RATIO

111-5162 CONTROL GP-FUEL RATIO
S/N 10Z46473-UP
PART OF 113-5342 PUMP GP-GOV & FUEL INJ
i00125729 SEBP2540
1115162 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-9315 [2] WASHER-SPRING  
2. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 2A-5546 [2] BOLT (1/4-20X1.375-IN)  
4. 5P-6945 [2] BOLT (1/4-20X1.125-IN)  
5. 3E-6760 [1] SEAL-O-RING  
6. 4P-7274 [1] COVER  
7. 9S-8748 [1] NUT-FULL (1/4-28-THD)  
8. 4W-0924 [1] RETAINER  
9. 5P-8210 [1] SEAL-O-RING  
10. 7W-2826 [1] SPRING  
11. 4P-7275 [1] COVER  
12. 106-6493 [1] WASHER  
13. 6I-1564 [1] DIAPHRAGM  
14. 9N-1754 [1] SPRING  
15. 7W-2828 [1] SPRING  
16. 7W-2015 [1] EXTENSION-VALVE  
17. 7N-9035 [1] RETAINER  
18. 7N-9062 [1] HOUSING  
19. 8N-5763 [1] SEAL  
20. 8N-5764 [1] PISTON  
21. 8F-4610 [1] RING-RETAINING  
22. 2W-9316 [1] VALVE AS  
23. 9Y-8088 [1] VALVE  
24. 8N-5765 [1] SPRING  
25. 111-5163 [1] TAG-IDENTIFICATION  
26. 115-3358 [1] WASHER (12.7X6.65X0.79-MM THK)  
 

#SEBP25400118
 

8W-4742: CONTROL GP-GOVERNOR

8W-4742 CONTROL GP-GOVERNOR
S/N 4ER1-620
PART OF 123-4036 CHASSIS AR
i00125395 SEBP2540
8W4742 CONTROL GP-GOVERNOR Parts scheme 8W4742 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6B-4196 [1] WASHER-THRUST (16.25X26.97X2.36-MM THK)  
2. 7K-2135 [2] BEARING-ROLLER  
3. 9G-9154 [1] CLIP  
4. 8T-9383 [1] BOLT (1/2-13X0.75-IN)  
  8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 1B-8704 [2] KEY-WOODRUFF  
6. 8X-7740 [1] CLIP  
7. 8W-8909 [3] SLEEVE  
8. 4D-4064 [1] ROD END (3/8-24-THD)  
9. 6V-8801 [4] NUT (3/8-16-THD)  
10. 5B-1866 [1] PLUG-CUP  
11. 4L-6454 [1] BOLT (3/8-16X1-IN)  
12. 8C-9586 [1] CABLE AS  
13. 4M-6425 [2] BOLT (5/16-18X1-IN)  
14. 8X-2496 [1] HOUSING  
15. 1A-2457 [1] PIN-CLEVIS  
  3B-4607 [1] PIN-COTTER  
16. 3D-9609 [1] ROD END  
17. 164-3562 [1] CONTROL  
  9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
18. 112-9164 [3] BOOT  
19. 4J-8922 [1] ROD END (3/8-24-THD)  
20. 3S-2713 [2] NUT-FULL (3/8-24-THD)  
21. 1B-0676 [1] PIN  
22. 7V-0446 [1] CLIP  
23. 8X-3595 [1] BRACKET  
24. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
25. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
26. 0V-0196 [2] BOLT (3/8-16X1.25-IN)  
27. 8X-2955 [1] SHAFT  
28. 8D-5996 [1] LEVER  
29. 8X-2948 [1] LEVER  
30. 2L-7693 [2] BUSHING  
31. 4D-2498 [1] LEVER  
32. 6H-7127 [1] SPACER (13/32X5/8X9/16-IN THK)  
33. 7H-3641 [4] END-ROD (5/16-24-THD)  
34. 2N-9421 [2] SPRING-DISC  
35. 6V-8918 [2] BOLT (5/16-18X1.25-IN)  
36. 6V-8189 [2] NUT (5/16-18-THD)  
37. 8X-3125 [1] ROD  
38. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
39. 5S-7383 [3] BOLT (3/8-16X1.75-IN)  
40. 8X-2947 [1] PEDAL AS-DECELERATOR  
41. 2K-2882 [1] BOLT-SPECIAL  
42. 2K-2773 [1] STUD (3/8-24X5.61-IN)  
43. 8X-3122 [1] LINK AS  
  6D-0458 [2] RETAINER  
44. 2B-8343 [1] SPRING  
45. 4F-9503 [1] SPRING (LONG)  
46. 2S-1382 [1] SPRING (SHORT)  
47. 8D-9973 [1] HOUSING  
48. 7K-2135 [2] BEARING-ROLLER  
49. 9D-0145 [1] LEVER  
50. 8X-3123 [1] SHAFT  
51. 1B-8704 [4] KEY-WOODRUFF  
52. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
53. 4D-4895 [2] LEVER  
54. 5S-7383 [2] BOLT (3/8-16X1.75-IN)  
55. 6V-8801 [4] NUT (3/8-16-THD)  
56. 8X-3593 [1] BRACKET AS  
57. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
58. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
59. 8X-3124 [1] SHAFT  
60. 8X-3261 [1] LEVER  
61. 8X-2500 [1] PEDAL-GOVERNOR CONTROL  
62. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
63. 145-9077 [1] ROD  
64. 009-0008 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
65. 4J-8922 [2] ROD END (3/8-24-THD)  
66. 3S-2713 [2] NUT-FULL (3/8-24-THD)  
67. 1B-0676 [2] PIN  
68. 7V-0446 [2] CLIP  
69. 6V-8185 [2] NUT (1/4-20-THD)  
70. 6V-8187 [2] NUT (1/4-28-THD)  
71. 1V-6341 [2] SEAL (30.15MM OD)  
72. 4L-6454 [6] BOLT (3/8-16X1-IN)  
73. 8D-9969 [1] COVER  
  8D-9974 [1] GASKET  
74. 4M-5281 [6] BOLT (1/4-20X0.75-IN)  
75. 8X-2954 [1] COVER  
  8X-2952 [1] GASKET  
76. 5P-7704 [1] ROD END  
77. 8T-4205 [10] WASHER-HARD (7.2X14.5X2-MM THK)  
78. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
79. 7H-3641 [1] END-ROD (5/16-24-THD)  
80. 6V-8186 [1] NUT-FULL (5/16-24-THD)  
81. 6L-7751 [1] ROD END  
82. 6V-8189 [2] NUT (5/16-18-THD)  
83. 8X-8299 [1] LEVER  
84. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
85. 8C-6876 [1] BOLT (5/16-18X1.625-IN)  
86. 2V-7859 [1] BEARING  
87. 7M-2697 [1] SCREW-SOCKET (5/16-18X1-IN)  
88. 8X-3121 [1] ROD  
89. 5M-8500 [1] KNOB (THROTTLE CONTROL)  
90. 6V-1322 [1] BOLT (1/4-20X0.375-IN)  
91. 8X-2956 [1] LEVER AS  
92. 9M-2750 [2] SCREW-HEX SOCKET (1/4-20X0.62-IN)  
93. 8X-2953 [1] PLATE  
94. 8T-2604 [1] SEAL-LIP TYPE  
95. 8T-8908 [1] BOLT (1/4-20X1-IN)  
96. 7J-0637 [1] BOLT-SOCKET HEAD (1/4-20X0.375-IN)  
97. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
98. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
  M   METRIC PART
 

#SEBP25400119
 

8W-4742: CONTROL GP-GOVERNOR

8W-4742 CONTROL GP-GOVERNOR
S/N 4ER621-UP
PART OF 123-4036 CHASSIS AR
i01361841 SEBP2540
8W4742 CONTROL GP-GOVERNOR Parts scheme 8W4742 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 12H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6B-4196 [1] WASHER-THRUST (16.25X26.97X2.36-MM THK)  
2. 7K-2135 [2] BEARING-ROLLER  
3. 9G-9154 [1] CLIP  
4. 8T-9383 [1] BOLT (1/2-13X0.75-IN)  
  8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 1B-8704 [2] KEY-WOODRUFF  
6. 033-8248 [1] CLIP (LOOP)  
7. 8W-8909 [2] SLEEVE  
8. 4D-4064 [1] ROD END (3/8-24-THD)  
9. 6V-8801 [5] NUT (3/8-16-THD)  
10. 5B-1866 [1] PLUG-CUP  
11. 4L-6454 [1] BOLT (3/8-16X1-IN)  
12. 8C-9586 [1] CABLE AS  
13. 4M-6425 [2] BOLT (5/16-18X1-IN)  
14. 8X-2496 [1] HOUSING  
15. 1A-2457 [1] PIN-CLEVIS  
  3B-4607 [1] PIN-COTTER  
16. 3D-9609 [1] ROD END  
17. 164-3562 [1] CONTROL  
  9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
18. 112-9164 [3] BOOT  
19. 4J-8922 C [2] ROD END (3/8-24-THD)  
20. 3S-2713 C [3] NUT-FULL (3/8-24-THD)  
21. 1B-0676 [1] PIN  
22. 7V-0446 [1] CLIP  
23. 8X-3595 [1] BRACKET  
24. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
25. 8T-4896 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
26. 0V-0196 [2] BOLT (3/8-16X1.25-IN)  
27. 8X-2955 [1] SHAFT  
28. 8D-5996 [1] LEVER  
29. 8X-2948 [1] LEVER  
30. 2L-7693 [2] BUSHING  
31. 4D-2498 [1] LEVER  
32. 6H-7127 [1] SPACER (13/32X5/8X9/16-IN THK)  
33. 7H-3641 [4] END-ROD (5/16-24-THD)  
34. 2N-9421 [2] SPRING-DISC  
35. 6V-8918 [2] BOLT (5/16-18X1.25-IN)  
36. 6V-8189 [2] NUT (5/16-18-THD)  
37. 8X-3125 [1] ROD  
38. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
39. 5S-7383 [3] BOLT (3/8-16X1.75-IN)  
40. 8X-2947 [1] PEDAL AS-DECELERATOR  
41. 2K-2882 [1] BOLT-SPECIAL  
42. 2K-2773 [1] STUD (3/8-24X5.61-IN)  
43. 8X-3122 [1] LINK AS  
  6D-0458 [2] RETAINER  
44. 2B-8343 [1] SPRING  
45. 4F-9503 [1] SPRING (LONG)  
46. 2S-1382 [1] SPRING (SHORT)  
47. 8D-9973 [1] HOUSING  
48. 7K-2135 [2] BEARING-ROLLER  
49. 9D-0145 [1] LEVER  
50. 8X-3123 [1] SHAFT  
51. 1B-8704 [4] KEY-WOODRUFF  
52. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
53. 4D-4895 [2] LEVER  
54. 5S-7383 [2] BOLT (3/8-16X1.75-IN)  
55. 6V-8801 [4] NUT (3/8-16-THD)  
56. 8X-3593 [1] BRACKET AS  
57. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
58. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
59. 8X-3124 [1] SHAFT  
60. 8X-3261 [1] LEVER  
61. 8X-2500 [1] PEDAL-GOVERNOR CONTROL  
62. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
63. 169-0922 [1] ROD  
64. 009-0008 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
65. 4J-8922 [1] ROD END (3/8-24-THD)  
66. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
67. 1B-0676 [2] PIN  
68. 7V-0446 [2] CLIP  
69. 6V-8185 [2] NUT (1/4-20-THD)  
70. 6V-8187 [2] NUT (1/4-28-THD)  
71. 1V-6341 [2] SEAL (30.15MM OD)  
72. 4L-6454 [6] BOLT (3/8-16X1-IN)  
73. 8D-9969 [1] COVER  
  8D-9974 [1] GASKET  
74. 4M-5281 [6] BOLT (1/4-20X0.75-IN)  
75. 8X-2954 [1] COVER  
  8X-2952 [1] GASKET  
76. 5P-7704 [1] ROD END  
77. 8T-4205 [10] WASHER-HARD (7.2X14.5X2-MM THK)  
78. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
79. 7H-3641 [1] END-ROD (5/16-24-THD)  
80. 6V-8186 [1] NUT-FULL (5/16-24-THD)  
81. 6L-7751 [1] ROD END  
82. 6V-8189 [2] NUT (5/16-18-THD)  
83. 8X-8299 [1] LEVER  
84. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
85. 8C-6876 [1] BOLT (5/16-18X1.625-IN)  
86. 2V-7859 [1] BEARING  
87. 7M-2697 [1] SCREW-SOCKET (5/16-18X1-IN)  
88. 8X-3121 [1] ROD  
89. 5M-8500 [1] KNOB (THROTTLE CONTROL)  
90. 6V-1322 [1] BOLT (1/4-20X0.375-IN)  
91. 8X-2956 [1] LEVER AS  
92. 9M-2750 [2] SCREW-HEX SOCKET (1/4-20X0.62-IN)  
93. 8X-2953 [1] PLATE  
94. 8T-2604 [1] SEAL-LIP TYPE  
95. 8T-8908 [1] BOLT (1/4-20X1-IN)  
96. 7J-0637 [1] BOLT-SOCKET HEAD (1/4-20X0.375-IN)  
97. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
98. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
99. 169-0921 [1] ROD END (3/8-24 LH-THD)  
100. 2P-8886 C [1] LEG  
101. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Disassembly and Assembly
Exhaust Manifold - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 12H :

LINES GP-AIR
7C-2094 LINES GP-AIR
LINES GP-AIR
1P-9585 LINES GP-AIR
LINES GP-AIR
110-0020 LINES GP-AIR
FASTENER GP-EXHAUST MANIFOLD
7E-5682 FASTENER GP-EXHAUST MANIFOLD
EXTENSION GP-EXHAUST
4N-8298 EXTENSION GP-EXHAUST
DUST EJECTOR GP
2W-9095 DUST EJECTOR GP
DUST EJECTOR GP
113-8513 DUST EJECTOR GP
AIR CLEANER GP
7E-5677 AIR CLEANER GP
MANIFOLD GP-EXHAUST
2P-6572 MANIFOLD GP-EXHAUST
MUFFLER & MOUNTING GP
113-8511 MUFFLER & MOUNTING GP
MUFFLER GP
127-4930 MUFFLER GP
PIPE GP-EXHAUST
2W-9093 PIPE GP-EXHAUST
TURBOCHARGER GP
113-5340 TURBOCHARGER GP
TURBOCHARGER GP
113-7919 TURBOCHARGER GP
CONTROL GP-FUEL RATIO
111-5162 CONTROL GP-FUEL RATIO
CONTROL GP-GOVERNOR
8W-4742 CONTROL GP-GOVERNOR

Truck sale:

Caterpillar 12H, Construction
115,000 
Caterpillar 12H, Construction
- motor graders
EMPRESAS MATCO, S.A. DE C.V.
Mexico
Caterpillar 12H, Construction
116,500 
Caterpillar 12H, Construction
- motor graders
EMPRESAS MATCO, S.A. DE C.V.
Mexico
Caterpillar 12H, Construction
87,000 
Caterpillar 12H, Construction
- motor graders
MADISA
Mexico
Caterpillar 12 H, Construction
106,008 
Caterpillar 12 H, Construction
- motor graders
TRACTAFRIC EQUIPMENT
Netherlands
Caterpillar 12H, Construction
90,000 
Caterpillar 12H, Construction
- motor graders
NMC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.