FRAME AND BODY
FRAME GPGUARD GP
HITCH GP
HOOD GP
FRAME AND BODY
FRAME GP
#SEBP25400460
8W-6249: FRAME GP-FRONT
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8W-7284 | [1] | FRAME AS-PLATFORM & SEAT | |
| 2. | 9D-9257 | [1] | PIN | |
| 3. | 8D-3791 | [1] | PIN | |
| 4. | 4L-6454 | [7] | BOLT (3/8-16X1-IN) | |
| 5. | 8D-9159 | [4] | BUSHING | |
| 6. | 9D-6589 | [8] | SEAL-LIP TYPE | |
| 7. | 9D-3311 | [1] | BUSHING | |
| 8. | 9D-6584 | [1] | SEAL-LIP TYPE | |
| 9. | 8X-3200 | [1] | PLATE AS | |
| 9F-2978 | [4] | NUT-WELD (3/8-16-THD) | ||
| 7D-1151 | [1] | BLOCK | ||
| 8G-0452 | [6] | LUG (3/8-16-THD) | ||
| 10. | 5P-1075 | [27] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 11. | 111-3945 | [2] | PLATE | |
| 12. | 110-7004 | [1] | COVER | |
| 13. | 110-7005 | [1] | COVER | |
| 14. | 5P-8167 | [3] | BOLT (3/8-16X0.625-IN) | |
| 15. | 5M-3062 | [20] | BOLT (3/8-16X0.75-IN) | |
| 16. | 6K-4076 | [1] | BUSHING |
#SEBP25400461
140-7616: GUARD & SUPPORT GP-RADIATOR
140-7616 GUARD & SUPPORT GP-RADIATOR
S/N 4ER400-UP
PART OF 123-4036 CHASSIS AR
S/N 4ER400-UP
PART OF 123-4036 CHASSIS AR
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 138-3760 | [1] | SUPPORT AS | |
| 1F-0750 | [48] | NUT-WELD (3/8-16-THD) | ||
| 9M-5732 | [3] | RIVET-POP | ||
| 2. | 138-3779 | [1] | PLATE AS | |
| 1F-0750 | [5] | NUT-WELD (3/8-16-THD) | ||
| 4B-4274 | [4] | WASHER (5.5X13X1.2-MM THK) | ||
| 9M-5732 | [4] | RIVET-POP | ||
| 3. | 5P-9909 D | SEAL (1.8M) | ||
| 4. | 5M-3062 | [50] | BOLT (3/8-16X0.75-IN) | |
| 5. | 138-3780 | [1] | SHIELD AS | |
| 4B-4274 | [4] | WASHER (5.5X13X1.2-MM THK) | ||
| 9M-5732 | [4] | RIVET-POP | ||
| 6. | 140-7617 | [1] | PLATE | |
| 7. | 5P-1075 | [50] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 8. | 1W-8793 | [6] | SPACER (13.8X30X20-MM THK) | |
| 9. | 5P-8245 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 10. | 103-1596 | [1] | GRILL AS-RADIATOR | |
| 1F-0750 | [2] | NUT-WELD (3/8-16-THD) | ||
| 11. | 113-9517 | [2] | HANDRAIL | |
| 12. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 8T-4835 | [6] | BOLT (1/2-13X2-IN) | |
| 14. | 123-3827 E | SEAL (178CM) | ||
| 15. | 138-7063 | [1] | PLATE | |
| 16. | 138-7062 | [1] | PLATE | |
| 17. | 9B-7237 | [4] | BOLT (3/8-16X1.25-IN) | |
| 18. | 5P-8502 | [1] | PADLOCK GP | |
| 5P-8500 A | [1] | KEY | ||
| 8Y-6364 A | [1] | SLEEVE | ||
| A | NOT PART OF THIS GROUP | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP25400462
8W-5385: GUARD & SUPPORT GP-RADIATOR
8W-5385 GUARD & SUPPORT GP-RADIATOR
S/N 4ER1-399
PART OF 123-4036 CHASSIS AR
S/N 4ER1-399
PART OF 123-4036 CHASSIS AR
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 103-1596 | [1] | GRILL AS-RADIATOR | |
| 9F-2978 | [2] | NUT-WELD (3/8-16-THD) | ||
| 5D-9629 | [5] | ROD | ||
| 2. | 113-9517 | [2] | HANDRAIL | |
| 3. | 104-1956 | [1] | SUPPORT AS | |
| 9F-2978 | [42] | NUT-WELD (3/8-16-THD) | ||
| 9M-5732 | [3] | RIVET-POP | ||
| 4. | 5M-3062 | [44] | BOLT (3/8-16X0.75-IN) | |
| 5. | 5P-1075 | [40] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 6. | 2A-7326 | [1] | SHIELD AS | |
| 4B-4274 | [4] | WASHER (5.5X13X1.2-MM THK) | ||
| 9M-5732 | [4] | RIVET-POP | ||
| 7. | 2A-7136 | [1] | PLATE | |
| 8. | 8T-4835 | [6] | BOLT (1/2-13X2-IN) | |
| 5P-8245 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 9. | 1W-8793 | [6] | SPACER (13.8X30X20-MM THK) | |
| 10. | 7I-4616 | [1] | PLATE AS | |
| 9F-2978 | [5] | NUT-WELD (3/8-16-THD) | ||
| 4B-4274 | [4] | WASHER (5.5X13X1.2-MM THK) | ||
| 9M-5732 | [4] | RIVET-POP | ||
| 11. | 5P-9909 BD | SEAL | ||
| 12. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
#SEBP25400463
8W-6230: GUARD GP-BOTTOM
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8W-8412 | [1] | GUARD AS | |
| 2. | 8W-6627 | [1] | SUPPORT AS | |
| 3. | 8K-0530 | [2] | PIN-CABLE SOCKET | |
| 4. | 7D-7496 | [2] | PIN AS | |
| 5. | 8W-6626 | [2] | CAP | |
| 6. | 0L-1178 | [4] | BOLT (3/4-10X2-IN) | |
| 7. | 5P-6652 | [4] | WASHER (20X44.5X6-MM THK) | |
| 8. | 5P-2566 | [8] | BOLT (1/2-13X1.5-IN) | |
| 9. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 10. | 3B-7740 | [2] | NIPPLE-PIPE |
#SEBP25400464
8W-7030: GUARD GP-CYLINDER
8W-7030 GUARD GP-CYLINDER
S/N 4ER1-UP
PART OF 117-3163, 117-3536 BLADE AR
AN ATTACHMENT
S/N 4ER1-UP
PART OF 117-3163, 117-3536 BLADE AR
AN ATTACHMENT
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8W-5227 | [1] | GUARD AS | |
| 2. | 7X-0334 C | [4] | BOLT (1/2-13X5-IN) | |
| 3. | 105-2080 C | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 4. | 7D-1649 C | [4] | WASHER-HARD (13.5X32X5-MM THK) | |
| 5. | 102-4139 C | [4] | SPACER (18.85X26.67X78-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP25400465
8W-5870: GUARD GP-DRIVE SHAFT
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS#SEBP25400466
7I-5045: GUARD GP-PLATFORM
7I-5045 GUARD GP-PLATFORM
S/N 4ER1-UP
PART OF 129-7230 CANOPY AR, 116-5878 ROPS AR
AN ATTACHMENT
S/N 4ER1-UP
PART OF 129-7230 CANOPY AR, 116-5878 ROPS AR
AN ATTACHMENT
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8X-2226 | [2] | PLATE | |
| 2. | 8X-2913 | [2] | COVER AS | |
| (EACH INCLUDES) | ||||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 3. | 160-6382 | [1] | GROMMET | |
| 4. | 9G-3667 | [1] | HOUSING-PLUG | |
| 5. | 8X-6478 | [1] | PANEL AS | |
| 4K-8479 | [7] | STUD-WELD (3/8-16X1.25-IN) | ||
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 9D-5659 | [18] | BOSS (3/8-16X1.19-IN) | ||
| [4] | CLIP | |||
| 6. | 5P-1075 | [3] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 7. | 8X-7978 | [1] | COVER | |
| 8. | 9X-2043 M | [26] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 9. | 4M-5281 | [4] | BOLT (1/4-20X0.75-IN) | |
| 10. | 5P-4115 | [4] | WASHER-HARD (7.2X19X2-MM THK) | |
| 11. | 3S-2093 | [1] | STRAP-CABLE | |
| 12. | 8X-6496 | [1] | PANEL | |
| 13. | 8X-6475 | [2] | PLATE | |
| 14. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 15. | 8X-8505 | [2] | PLATE | |
| 16. | 6V-2687 | [4] | SCREW-PAN HEAD (10-24X1-IN) | |
| 17. | 9G-3670 | [1] | HOUSING-PLUG | |
| 18. | 9G-3695 | [23] | PLUG-SEAL | |
| 19. | 7N-8204 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | |
| 20. | 9G-4352 | [1] | HOUSING-RECEPTACLE (8-GA TO 10-GA) | |
| 21. | 7G-7919 | [1] | PLUG-SEAL | |
| 22. | 7C-4354 | [1] | CLIP | |
| 23. | 9G-9152 | [1] | CLIP | |
| 24. | 9G-9154 | [2] | CLIP | |
| 25. | 5S-7379 | [2] | BOLT (3/8-16X0.875-IN) | |
| 26. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 27. | 3P-3839 | [1] | GROMMET | |
| 28. | 7N-9737 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | |
| 29. | 9G-9150 | [2] | CLIP | |
| 30. | 124-8949 | [1] | FLOOR MAT | |
| M | METRIC PART | |||
#SEBP25400467
8X-4154: GUARD GP-PLATFORM
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-0328 | [4] | BOLT (1/2-13X3.5-IN) | |
| 2. | 8X-9464 | [2] | STEP AS | |
| 3. | 8W-3902 | [1] | SUPPORT AS | |
| 4. | 8X-2913 | [2] | COVER AS | |
| (EACH INCLUDES) | ||||
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 5. | 3H-2900 | [1] | GROMMET | |
| 6. | 9G-3667 | [1] | HOUSING-PLUG | |
| 7. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 8. | 8X-6478 | [1] | PANEL AS | |
| 4K-8479 | [7] | STUD-WELD (3/8-16X1.25-IN) | ||
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 9D-5659 | [1] | BOSS (3/8-16X1.19-IN) | ||
| [8] | CLIP | |||
| 9. | 5P-1075 | [7] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 10. | 8X-7978 | [1] | COVER | |
| 11. | 135-3894 | [1] | PIPE AS | |
| 12. | 5P-2566 | [8] | BOLT (1/2-13X1.5-IN) | |
| 13. | 9X-2043 M | [16] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 14. | 4M-5281 | [4] | BOLT (1/4-20X0.75-IN) | |
| 15. | 5P-4115 | [4] | WASHER-HARD (7.2X19X2-MM THK) | |
| 16. | 8X-6419 | [1] | FLOOR MAT | |
| 17. | 8X-6496 | [1] | PANEL | |
| 18. | 8X-6475 | [2] | PLATE | |
| 19. | 4L-6454 | [7] | BOLT (3/8-16X1-IN) | |
| 20. | 6V-8188 | [4] | NUT (1/2-13-THD) | |
| 21. | 8X-8505 | [2] | PLATE | |
| 22. | 6V-2687 | [4] | SCREW-PAN HEAD (10-24X1-IN) | |
| 23. | 9G-3670 | [1] | HOUSING-PLUG | |
| 24. | 9G-3695 | [23] | PLUG-SEAL | |
| 25. | 7N-8204 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | |
| 26. | 9G-4352 | [1] | HOUSING-RECEPTACLE (8-GA TO 10-GA) | |
| 27. | 7G-7919 | [1] | PLUG-SEAL | |
| 28. | 7C-4354 | [1] | CLIP | |
| 29. | 9G-9152 | [1] | CLIP | |
| 30. | 9G-9154 | [2] | CLIP | |
| 31. | 5S-7379 | [2] | BOLT (3/8-16X0.875-IN) | |
| 32. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 33. | 3S-2093 | [1] | STRAP-CABLE | |
| 34. | 160-6382 | [1] | GROMMET | |
| 35. | 9G-9150 | [2] | CLIP | |
| 36. | 7N-9737 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | |
| M | METRIC PART | |||
#SEBP25400468
106-4884: HITCH GP-ARTICULATING
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4K-8659 | [1] | BUSHING | |
| 2. | 4K-7463 | [2] | SEAL-LIP TYPE | |
| 3. | 0S-1587 | [2] | BOLT (1/2-13X1.75-IN) | |
| 4. | 5P-8245 | [19] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 5. | 6G-0417 | [1] | COVER | |
| 6. | 1A-1460 | [4] | BOLT (1/2-13X2-IN) | |
| 7. | 2V-4331 | [1] | COLLAR | |
| 8. | 5K-0984 | [1] | BUSHING | |
| 9. | 124-3240 | [1] | PIN | |
| 10. | 5K-0871 | [1] | PIN-LOWER | |
| 11. | 5K-0987 | [1] | SPACER | |
| 12. | 5K-0988 B | [1] | SHIM PACK (INCLUDES 35-SHIMS) | |
| 13. | 5K-0985 | [1] | BEARING AS-ROLLER | |
| 14. | 4K-7464 B | [1] | SHIM PACK (INCLUDES 19-SHIMS) | |
| 15. | 0S-1585 | [6] | BOLT (1/2-13X1.5-IN) | |
| 16. | 0S-1589 | [4] | BOLT (5/8-11X1.75-IN) | |
| 17. | 5P-8247 | [4] | WASHER-HARD (17X32X3.5-MM THK) | |
| 18. | 4V-0015 | [1] | PLATE-LOCK | |
| 19. | 4K-6781 | [1] | SPACER | |
| 20. | 5K-0991 | [1] | CAP-LOWER | |
| 21. | 5K-0983 | [2] | SEAL-LIP TYPE | |
| 22. | 5K-0989 | [1] | CAP-UPPER | |
| 23. | 1D-4569 | [7] | BOLT (1/2-13X4.25-IN) | |
| B | USE AS REQUIRED | |||
#SEBP25400469
112-1342: HOOD & DASH GP
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 127-5726 | [2] | PANEL | |
| 2. | 113-9517 | [2] | HANDRAIL | |
| 3. | 127-6973 | [1] | HOOD AS | |
| 4. | 7I-4995 | [2] | HANDRAIL | |
| 5. | 144-6392 | [1] | DASH AS | |
| 6. | 5P-1075 | [39] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 7. | 4L-6454 | [39] | BOLT (3/8-16X1-IN) | |
| 8. | 216-8338 | [1] | PLATE | |
| 10. | 5P-2424 | [4] | BOLT (1/2-13X2.25-IN) | |
| 11. | 134-0165 | [6] | WASHER (13.8X45X3-MM THK) | |
| 12. | 8D-3786 | [4] | MOUNTING | |
| 13. | 7I-4985 | [2] | PLATE | |
| 14. | 7X-0550 | [4] | WASHER-HARD (13.5X32X5-MM THK) | |
| 15. | 8T-8917 | [4] | BOLT (1/2-13X1.25-IN) | |
| 16. | 135-7099 | [2] | PLATE AS | |
| 17. | 6V-8188 | [2] | NUT (1/2-13-THD) | |
| 18. | 7I-4983 | [4] | PLATE AS | |
| 19. | 7X-0618 | [2] | WASHER-HARD (13.5X40X5-MM THK) | |
| 20. | 135-7101 | [2] | BRACKET | |
| 21. | 142-6100 | [2] | PLATE AS |
