HYDRAULIC SYSTEM
SWIVEL GPTANK GP
SHAFT GP
VALVE & LINKAGE GP
HYDRAULIC SYSTEM
SWIVEL GP
#SEBP25400550
260-6502: SWIVEL GP
260-6502 SWIVEL GP -CIRCLE DRIVE
S/N 4ER635-UP
PART OF 106-4787, 117-3855 LINES GP-HYDRAULIC
Type 1
AN ATTACHMENT
S/N 4ER635-UP
PART OF 106-4787, 117-3855 LINES GP-HYDRAULIC
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5J-1246 B | [6] | SHIM (0.13-MM THK) | |
| 2. | 8J-2331 | [7] | SEAL | |
| 3. | 173-1008 | [1] | ROTOR | |
| 4. | 173-1009 | [1] | RETAINER | |
| 5. | 223-0580 | [1] | COVER | |
| 7. | 260-6501 | [1] | BODY | |
| 8. | 173-1007 | [2] | SEAL | |
| 9. | 1P-3700 | [4] | SEAL-RECTANGULAR | |
| 10. | 2H-3928 | [7] | SEAL-O-RING | |
| 11. | 4J-9964 | [2] | SEAL | |
| 12. | 5P-2566 | [6] | BOLT (1/2-13X1.5-IN) | |
| 13. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| B | USE AS REQUIRED | |||
#SEBP25400551
260-6502: SWIVEL GP
260-6502 SWIVEL GP -CIRCLE DRIVE
S/N 4ER635-UP
PART OF 106-4787, 117-3855 LINES GP-HYDRAULIC
Type 2
AN ATTACHMENT
S/N 4ER635-UP
PART OF 106-4787, 117-3855 LINES GP-HYDRAULIC
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5J-1246 B | [6] | SHIM (0.13-MM THK) | |
| 2. | 8J-2331 | [7] | SEAL | |
| 3. | 454-3032 | [1] | ROTOR | |
| 4. | 173-1009 | [1] | RETAINER | |
| 5. | 5P-2566 C | [2] | BOLT (1/2-13X1.5-IN) | |
| 6. | 454-2957 | [1] | BODY | |
| 7. | 148-8395 C | [4] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 8. | 173-1007 | [2] | SEAL | |
| 9. | 2H-3928 | [7] | SEAL-O-RING | |
| 10. | 4J-9964 | [2] | SEAL | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP25400552
9T-5604: SWIVEL GP
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5J-1246 B | [6] | SHIM (0.13-MM THK) | |
| 2. | 4K-1493 | [2] | SCREW-HOLLOW (1/2-13X1-IN) | |
| 3. | 8J-0380 | [1] | RETAINER | |
| 4. | 9T-5603 | [1] | BODY | |
| 5. | 8J-2331 | [7] | SEAL | |
| 6. | 2H-3928 | [7] | SEAL-O-RING | |
| 7. | 8J-0386 | [1] | ROTOR | |
| 8. | 5P-2566 | [4] | BOLT (1/2-13X1.5-IN) | |
| 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 9. | 3H-0107 | [4] | SEAL-O-RING | |
| 10. | 8J-0377 | [1] | COVER | |
| 11. | 4J-9964 | [2] | SEAL | |
| 12. | 8J-2330 | [2] | SEAL | |
| B | USE AS REQUIRED | |||
#SEBP25400553
214-1984: TANK & FILTER GP-HYDRAULIC
214-1984 TANK & FILTER GP-HYDRAULIC
S/N 4ER841-UP
PART OF 214-1983 TANK & MTG GP-HYDRAULIC
S/N 4ER841-UP
PART OF 214-1983 TANK & MTG GP-HYDRAULIC
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4B-2913 | [1] | PIN-CLEVIS | |
| 2. | 1R-0774 | [1] | FILTER ELEMENT AS-OIL (ADVANCED EFFICIENCY) | |
| 3. | 2S-5100 | [1] | VALVE-MANUAL (HYDRAULIC TANK) | |
| 4. | 3F-1547 | [1] | SEAL-O-RING | |
| 6. | 4M-6921 | [1] | WASHER-SPRING | |
| 7. | 5D-1911 | [1] | COVER-HYDRAULIC CAP | |
| 8. | 226-2871 | [1] | ROD | |
| 9. | 9J-1979 | [1] | RETAINER AS | |
| 12. | 9J-3047 | [1] | STRAINER (HYDRAULIC) | |
| 13. | 9M-7394 | [1] | LEVER | |
| 14. | 141-9661 | [1] | SPACER (20X128X6-MM THK) | |
| 15. | 226-2870 | [1] | CAP AS (HYDRAULIC TANK) | |
| 16. | 214-1982 | [1] | TANK AS | |
| 17. | 217-2661 | [1] | GAUGE-SIGHT (HYDRAULIC) | |
| 18. | 086-0507 | [1] | PIN | |
| 19. | 1L-5072 | [1] | DOWEL | |
| 20. | 2D-4202 | [1] | PLATE | |
| 21. | 2J-7761 | [1] | RING-RETAINING | |
| 22. | 3K-6060 | [1] | LOCKNUT (3/8-16-THD) | |
| 23. | 3G-0361 | [1] | GASKET (HYDRAULIC TANK FILL CAP) | |
| 25. | 7D-1195 | [1] | SEAL-O-RING | |
| 26. | 7H-1447 | [1] | CAP-FILLER (HYDRAULIC TANK) | |
| 27. | 8T-2275 | [1] | BALL | |
| 28. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 29. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 30. | 9H-6454 | [1] | GASKET | |
| 31. | 3B-4611 | [1] | PIN-COTTER | |
| M | METRIC PART | |||
#SEBP25400554
9T-7984: TANK & FILTER GP-HYDRAULIC
9T-7984 TANK & FILTER GP-HYDRAULIC
S/N 4ER1-UP
PART OF 8X-2369 TANK & MTG GP-HYDRAULIC
S/N 4ER1-UP
PART OF 8X-2369 TANK & MTG GP-HYDRAULIC
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9T-7985 | [1] | TANK AS | |
| 2. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 3. | 9J-1991 | [1] | HANDLE (HYDRAULIC FILTER COVER) | |
| 4. | 7B-3235 | [4] | BOLT (1/2-13X1.375-IN) | |
| 5. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 6. | 8X-5734 | [1] | PLATE | |
| 7. | 8X-5735 | [1] | PLATE | |
| 8. | 6V-5839 | [4] | WASHER (11X21X2.5-MM THK) | |
| 9. | 0S-1591 | [8] | BOLT (3/8-16X1.5-IN) | |
| 10. | 5D-1911 | [1] | COVER-HYDRAULIC CAP | |
| 11. | 9M-7394 | [1] | LEVER (HYDRAULIC CAP) | |
| 12. | 1L-5072 | [1] | DOWEL | |
| 13. | 0S-1594 | [70] | BOLT (3/8-16X1-IN) | |
| 14. | 2K-4973 | [84] | LOCKNUT (3/8-16-THD) | |
| 16. | 6E-2266 | [1] | ROD-THREADED | |
| 17. | 9J-1979 | [1] | RETAINER AS | |
| 18. | 8T-4896 | [84] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 19. | 7D-1195 | [1] | SEAL-O-RING | |
| 20. | 9J-1988 | [1] | VALVE | |
| 21. | 9J-1985 | [1] | TUBE AS | |
| 22. | 1L-4349 | [1] | SPRING | |
| 23. | 3G-3498 | [1] | FLANGE | |
| 24. | 5K-9107 | [2] | BOLT-LOCKING (3/8-16X0.75-IN) | |
| 25. | 2S-5100 | [1] | VALVE-MANUAL | |
| 26. | 6E-2267 | [1] | CAP | |
| 27. | 6D-9157 | [1] | SEAL-O-RING | |
| 28. | 7H-1447 | [1] | CAP-FILLER (HYDRAULIC) | |
| 29. | 8T-2275 | [1] | BALL | |
| 30. | 2D-4202 | [1] | PLATE | |
| 31. | 9H-6454 | [1] | GASKET | |
| 32. | 3G-0361 | [1] | GASKET | |
| 33. | 9J-3047 | [1] | STRAINER (HYDRAULIC) | |
| 34. | 3G-2692 | [1] | RETAINER | |
| 35. | 6E-2169 | [1] | PLATE-INDICATOR | |
| 36. | 4J-8251 | [1] | GROMMET | |
| 37. | 4J-8252 | [1] | GAUGE-SIGHT | |
| 38. | 5D-0353 | [2] | BOLT-LOCKING (3/8-16X1-IN) | |
| 39. | 5H-6005 | [2] | SEAL-O-RING | |
| 40. | 5P-9119 BD | GASKET-TAPE (ADHESIVE BACKED) | ||
| 41. | 6E-2269 | [1] | COVER | |
| 42. | 141-9661 | [1] | SPACER (20X128X6-MM THK) | |
| 43. | 086-0507 | [1] | PIN | |
| 44. | 2J-7761 | [1] | RING-RETAINING | |
| 45. | 4D-7794 | [3] | CLIP | |
| 46. | 4M-6921 | [1] | WASHER-SPRING | |
| 47. | 9S-4183 | [1] | PLUG (1-1/16-12-THD) | |
| 48. | 3D-2824 | [1] | SEAL-O-RING | |
| 49. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
#SEBP25400555
214-1983: TANK & MTG GP-HYDRAULIC
For full view, you need register
#SEBP25400556
8X-2369: TANK & MTG GP-HYDRAULIC
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9T-7984 Y | [1] | TANK & FILTER GP-HYDRAULIC | |
| 2. | 8X-5731 | [2] | PLATE | |
| 3. | 9D-7924 | [2] | MOUNTING AS | |
| 4. | 9B-7237 | [8] | BOLT (3/8-16X1.25-IN) | |
| 5. | 8T-9377 | [2] | BOLT (3/8-16X2.25-IN) | |
| 6. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 7. | 7X-0602 | [2] | WASHER-HARD (10X38X1.6-MM THK) | |
| 8. | 5P-1075 | [8] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 9. | 8X-5733 | [1] | PLATE | |
| 10. | 5P-2424 | [2] | BOLT (1/2-13X2.25-IN) | |
| 11. | 7I-4749 | [2] | BAR | |
| 12. | 8X-5732 | [1] | PLATE | |
| 13. | 8T-9391 | [4] | BOLT (1/2-13X3.75-IN) | |
| 14. | 8T-4223 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8D-3786 | [2] | MOUNTING | |
| 16. | 6V-6563 | [2] | WASHER (13.5X40X5-MM THK) | |
| 17. | 6V-8188 | [2] | NUT (1/2-13-THD) | |
| 18. | 5P-8502 | [1] | PADLOCK GP | |
| 5P-8500 A | [1] | KEY | ||
| 8Y-6364 A | [1] | SLEEVE | ||
| 19. | 7I-4750 | [4] | SPACER (15.5X44.5X14-MM THK) | |
| 20. | 1R-0722 | [1] | FILTER ELEMENT AS-OIL (STANDARD EFFICIENCY) | |
| A | NOT PART OF THIS GROUP | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25400557
112-5495: UNIVERSAL JOINT GP-PUMP DRIVE
112-5495 UNIVERSAL JOINT GP-PUMP DRIVE
S/N 4ER355-UP
PART OF 7D-9600 SHAFT GP-PUMP DRIVE
S/N 4ER355-UP
PART OF 7D-9600 SHAFT GP-PUMP DRIVE
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS#SEBP25400558
5Y-0769: UNIVERSAL JOINT GP-PUMP DRIVE
5Y-0769 UNIVERSAL JOINT GP-PUMP DRIVE
S/N 4ER1-354
PART OF 7D-9600 SHAFT GP-PUMP DRIVE
S/N 4ER1-354
PART OF 7D-9600 SHAFT GP-PUMP DRIVE
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS#SEBP25400559
112-6795: VALVE & LINKAGE GP
112-6795 VALVE & LINKAGE GP -4-BANK, RH; 2-BANK, LH
S/N 4ER1-UP
PART OF 112-4106 BLADE AR
S/N 4ER1-UP
PART OF 112-4106 BLADE AR
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 124-3325 Y | [1] | VALVE GP-BANK 4 (RH) | |
| 2. | 104-8672 Y | [1] | VALVE GP-BANK 2 (LH) | |
| 3. | 8X-5498 | [2] | RETAINER | |
| 4. | 101-2457 | [1] | LEVER (ARTICULATION) | |
| 5. | 8D-5634 | [1] | LEVER (CENTER SHIFT) | |
| 6. | 6V-8186 | [12] | NUT-FULL (5/16-24-THD) | |
| 7H-3641 | [12] | END-ROD (5/16-24-THD) | ||
| 8X-4276 | [6] | ROD | ||
| 7. | 8D-5633 | [1] | LEVER (WHEEL LEAN) | |
| 8. | 8D-8852 | [2] | SPACER (0.78X1.5X1.344-IN THK) | |
| 9. | 137-4515 | [2] | BUSHING | |
| 10. | 8D-5640 | [10] | BEARING | |
| 11. | 8D-5636 B | [4] | SHIM (0.254-MM THK) | |
| 12. | 8D-5637 B | [4] | SHIM (0.762-MM THK) | |
| 13. | 6L-1962 | [6] | NUT-JAM (3/8-24-THD) | |
| 14. | 8T-9043 | [12] | BOLT (5/16-18X0.875-IN) | |
| 15. | 3F-9556 | [12] | LOCKWASHER | |
| 16. | 9B-7237 | [2] | BOLT (3/8-16X1.25-IN) | |
| 17. | 8D-5641 | [8] | BEARING | |
| 18. | 2G-6757 | [1] | KNOB-BLADE LIFT (LH) | |
| 19. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 20. | 8D-5632 | [1] | LEVER (BLADE LIFT-RH) | |
| 21. | 2G-6751 | [1] | KNOB-CIRCLE DRIVE | |
| 22. | 2G-6748 | [1] | KNOB-BLADE LIFT (RH) | |
| 23. | 2G-6756 | [1] | KNOB-WHEEL LEAN | |
| 24. | 2G-6752 | [1] | KNOB-ARTICULATION | |
| 25. | 2G-6755 | [1] | KNOB-CENTERSHIFT | |
| 26. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 27. | 9M-1853 | [6] | MOUNTING | |
| 28. | 5P-1076 | [6] | WASHER-HARD (13.5X30X4-MM THK) | |
| 29. | 104-7740 | [1] | PLATE AS (LH) | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 30. | 104-7419 | [1] | PLATE AS (RH) | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 31. | 104-7429 | [2] | PLATE | |
| 32. | 137-4516 | [1] | SHAFT | |
| 33. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 34. | 6B-0933 | [4] | SPACER (10.31X19.05X6.35-MM THK) | |
| 35. | 5P-2424 | [6] | BOLT (1/2-13X2.25-IN) | |
| 36. | 6V-8188 | [2] | NUT (1/2-13-THD) | |
| 37. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 38. | 8F-6437 | [6] | WASHER (13.5X50.8X4.76-MM THK) | |
| 39. | 8D-5632 | [1] | LEVER (CIRCLE DRIVE) | |
| 40. | 8D-5634 | [1] | LEVER (BLADE LIFT-LH) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
