OPERATOR STATION
SEAT GPBLOWER GP-CAB
CAB GP
CANOPY GP
OPERATOR STATION
SEAT GP
#SEBP25400640
116-2779: ADJUSTER GP-SEAT
116-2779 ADJUSTER GP-SEAT
S/N 4ER1-UP
PART OF 8Y-6851, 8Y-6852 SEAT GP-STATIC
AN ATTACHMENT
S/N 4ER1-UP
PART OF 8Y-6851, 8Y-6852 SEAT GP-STATIC
AN ATTACHMENT
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9C-5347 | [4] | BOLT (1/2-13X0.75-IN) | |
| 2. | 9V-7943 | [2] | SPRING | |
| 3. | 116-2327 | [1] | SUPPORT AS | |
| 4. | 9C-2177 | [1] | CAP | |
| 5. | 6W-0590 | [1] | LEVER (SEAT ADJUST) | |
| 6. | 3J-5696 | [1] | PIPE | |
| 7. | 4V-7890 | [1] | SPRING | |
| 8. | 6W-0111 | [2] | LINK | |
| 9. | 2L-5893 | [1] | PIN-SPRING | |
| 10. | 4V-7891 | [1] | LATCH AS | |
| 11. | 5B-6172 | [8] | WASHER (9.7X19X0.8-MM THK) | |
| 12. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 13. | 9V-3043 | [1] | LINK AS | |
| 14. | 6W-0108 | [1] | LINK AS | |
| 15. | 116-2016 | [1] | ANGLE AS (LH) | |
| 16. | 116-2015 | [1] | ANGLE AS (RH) | |
| 17. | 6W-1885 | [1] | CHANNEL AS | |
| 9V-7440 | [4] | NUT-WELD | ||
| 18. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) |
#SEBP25400641
125-9854: ADJUSTER GP-SEAT
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 125-9853 | [1] | BASE AS | |
| 2. | 6W-1497 | [1] | SUPPORT AS | |
| 3. | 6W-1496 | [1] | SUPPORT AS | |
| 4. | 6W-1888 | [1] | SHEET | |
| 5. | 6W-2371 | [1] | PLATE AS | |
| 6. | 6W-3628 | [2] | CABLE | |
| 7. | 8T-9381 | [2] | BOLT (7/16-20X1-IN) | |
| 8. | 8S-4790 | [4] | SPACER (0.459X0.625X0.25-IN THK) | |
| 9. | 4B-5272 | [4] | WASHER (12.7X31.7X2-MM THK) | |
| 10. | 8R-4519 | [4] | LOCKNUT (7/16-20-THD) | |
| 11. | 5V-5262 | [2] | BOLT-SPECIAL | |
| 12. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 13. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) |
#SEBP25400642
134-1220: BLOWER & MTG GP-CAB
134-1220 BLOWER & MTG GP-CAB
S/N 4ER1-UP
PART OF 134-1221 BLOWER AR-CAB
AN ATTACHMENT
S/N 4ER1-UP
PART OF 134-1221 BLOWER AR-CAB
AN ATTACHMENT
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 126-7240 | [1] | BLOWER GP-CAB | ||
| 8T-4138 M | [2] | BOLT (M6X1X20-MM) | ||
| 139-1430 | [1] | FILM-CONTROL (HEAT & A/C BLOWER) | ||
| 8M-8948 | [1] | FUSE (15-AMPERE) | ||
| 3H-2900 | [1] | GROMMET | ||
| 5P-9135 | [1] | GROMMET | ||
| 2V-0099 | [1] | KNOB-CONTROL | ||
| 8D-1429 | [1] | LAMP (24-VOLT)(HEAT & A/C FAN SPEED INDICATOR) | ||
| 6V-8801 | [3] | NUT (3/8-16-THD) | ||
| 2P-4339 | [1] | NUT-JAM (7/16-28-THD) | ||
| 107-7090 | [1] | PLATE | ||
| 5P-5637 | [1] | SEAL | ||
| 5P-5672 | [1] | SEAL | ||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 6P-3236 | [1] | SWITCH AS-ROTARY (HEATING & A/C FAN SPEED) | ||
| 6V-8362 | [5] | SCREW-MACHINE (8-32X0.31-IN) | ||
| 9B-7233 | [5] | LOCKWASHER | ||
| 5P-1075 | [3] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 7X-0591 | [2] | WASHER-HARD (17X29X3-MM THK) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| M | METRIC PART | |||
#SEBP25400643
134-1221: BLOWER AR-CAB
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 134-1220 Y | [1] | BLOWER & MTG GP-CAB | ||
| 231-4487 | [2] | FILTER ELEMENT AS-CAB AIR | ||
| (EACH INCLUDES) | ||||
| 231-4486 | [1] | FILTER ELEMENT AS-CAB AIR (CAB) | ||
| 232-1732 | [1] | FILTER ELEMENT AS-CAB AIR (CAB) | ||
| 8Y-6388 | [6] | LOUVER AS-VENT | ||
| 139-3171 | [1] | PLATE | ||
| 112-9555 | [4] | SPRING-FILTER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25400644
129-7228: CAB AR
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS#SEBP25400645
129-7229: CAB AR
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 130-4563 Y | [1] | CAB GP (HIGH PROFILE) | ||
| [1] | COVER AS | |||
| 143-9288 | [1] | COVER | ||
| 171-7626 | [1] | FILM-INFORMATION (WIPER SWITCH) | ||
| 8W-5927 Y | [1] | INSULATION GP-WEATHER | ||
| 116-2144 Y | [1] | PANEL GP-INSTRUMENT | ||
| 170-6570 | [1] | PLATE AS | ||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 125-4342 Y | [1] | WASHER GP-WINDOW (FRONT)(FRONT) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25400646
130-4563: CAB GP
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 129-4618 Y | [1] | LINER GP-CAB (HIGH PROFILE) | ||
| 8X-2795 Y | [1] | MIRROR GP-REAR VIEW (INSIDE)(DUAL INSIDE) | ||
| 125-4344 Y | [1] | MOUNTING GP-CAB (NON-ROPS)(ENCLOSED) | ||
| 129-8614 Y | [1] | PANEL GP-CAB (HIGH PROFILE) | ||
| 125-4345 Y | [1] | WIPER GP-WINDOW (FRONT) | ||
| 130-4565 Y | [1] | WIRING GP-CAB | ||
| 129-4615 | [1] | CAB AS-HIGH PROFILE | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25400647
130-4564: CAB GP
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8X-4413 Y | [1] | DOOR GP-CAB (HIGH PROFILE)(HIGH PROFILE) | ||
| 125-4346 Y | [1] | LINER GP-CAB | ||
| 8X-2795 Y | [1] | MIRROR GP-REAR VIEW (INSIDE)(DUAL INSIDE) | ||
| 125-4344 Y | [1] | MOUNTING GP-CAB (NON-ROPS)(ENCLOSED) | ||
| 8X-2385 Y | [1] | WINDOW GP-CAB (HIGH PROFILE) | ||
| 125-4345 Y | [1] | WIPER GP-WINDOW (FRONT) | ||
| 112-6080 Y | [1] | WIRING GP-CAB | ||
| 119-1795 | [1] | CAB AS-NON-ROPS | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25400648
129-7230: CANOPY AR
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS#SEBP25400649
130-2886: CANOPY GP
For full view, you need register
Parts for your 12H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 130-0115 | [1] | INSULATION | |
| 2. | 8X-2795 Y | [1] | MIRROR GP-REAR VIEW (INSIDE)(DUAL INSIDE) | |
| 3. | 164-2465 | [2] | PAD | |
| 4. | 9D-1589 | [2] | MOUNTING | |
| 5. | 3V-9244 | [2] | WASHER (16.5X50X5-MM THK) | |
| 6. | 103-5515 | [1] | PAD (RH) | |
| 7. | 103-5516 | [1] | PAD (LH) | |
| 8. | 7X-0375 | [4] | BOLT (3/4-10X5-IN) | |
| 9. | 8X-0674 | [4] | WASHER (22X100X10-MM THK) | |
| 10. | 103-4953 | [4] | MOUNTING | |
| 11. | 134-6474 | [1] | PLATE | |
| 12. | 129-4645 | [1] | INSULATION | |
| 13. | 129-4646 | [1] | INSULATION | |
| 14. | 9X-2045 M | [3] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 15. | 4K-0367 | [2] | NUT-FULL (5/8-11-THD) | |
| 16. | 7X-0354 | [2] | BOLT (5/8-11X4.5-IN) | |
| 17. | 8T-4122 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 18. | 102-9372 | [1] | GLASS (REAR) | |
| 19. | 130-0111 | [1] | CANOPY AS | |
| 20. | 9X-2043 M | [5] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 21. | 5P-5768 D | SEAL (4.3-M) | ||
| 22. | 141-5835 | [1] | PLATE | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
