AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3406C Generator Set 1LS00001-UP BASIC ENGINE Caterpillar SIS



GEN SET ENGINE 3406C GEN SET ENGINE 1LS
 3406C Generator Set 1LS00001-UP SEBP2541 3406C 1LS   (1996)

Parts group 3406C:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
LINES GP-AIR COMPRESSOR
2W-9998 LINES GP-AIR COMPRESSOR
2W-9998 LINES GP-AIR COMPRESSOR
S/N 1LS1-UP
FOR USE WITH AIR COMPRESSOR
AN ATTACHMENT
BARRING GP
BARRING GP
5R-7425 BARRING GP
5R-7425 BARRING GP -LH
S/N 1LS1-UP
AN ATTACHMENT
CAMSHAFT GP
CAMSHAFT GP
7W-3798 CAMSHAFT GP
7W-3798 CAMSHAFT GP -SINGLE
S/N 1LS1-UP
COUPLING GP
COUPLING GP-GENERATOR
109-3319 COUPLING GP-GENERATOR
109-3319 COUPLING GP-GENERATOR
S/N 8ER1-UP; 9CR1-UP
FOR USE WITH 440 PERMANENT MAGNET GENERATOR
AN ATTACHMENT
COUPLING GP-GENERATOR
133-9878 COUPLING GP-GENERATOR
133-9878 COUPLING GP-GENERATOR
S/N 9DR1-UP
FOR USE WITH 440 FRAME GENERATORS
AN ATTACHMENT
MOUNTING GP-ENGINE FLEXIBLE
6I-1537 MOUNTING GP-ENGINE FLEXIBLE
6I-1537 MOUNTING GP-ENGINE FLEXIBLE
S/N 1LS1-UP
REQUIRES NEW PRIME GEN SET ENGINE ONLY
AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT AS
430-2593 CRANKSHAFT AS
430-2593 CRANKSHAFT AS
S/N 1LS1-UP
PART OF 4N-0741 CRANKSHAFT GP
CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
S/N 1LS1-UP
Type 1
CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
S/N 1LS1-UP
Type 2
243-6718 KIT-CRANKSHAFT BEARING
243-6718 KIT-CRANKSHAFT BEARING
S/N 1LS1-UP
PART OF 4N-0741 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT -REAR
S/N 1LS1-UP
PART OF 4N-0741 CRANKSHAFT GP
FOR USE WITH CCW ROTATION
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT -FRONT
S/N 1LS1-UP
PART OF 4N-0741 CRANKSHAFT GP
FOR USE WITH CW ROTATION
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
1W-5107 COVER GP-CYLINDER BLOCK
1W-5107 COVER GP-CYLINDER BLOCK
S/N 1LS1-UP
CYLINDER BLOCK AS
202-1257 CYLINDER BLOCK AS
202-1257 CYLINDER BLOCK AS
S/N 1LS1535-UP
PART OF 463-3536 CYLINDER BLOCK AS, 152-7642 CYLINDER BLOCK GP
CYLINDER BLOCK AS
463-3536 CYLINDER BLOCK AS
463-3536 CYLINDER BLOCK AS
S/N 1LS1535-UP
PART OF 202-1258 CYLINDER BLOCK GP
CYLINDER BLOCK GP
108-3914 CYLINDER BLOCK GP
108-3914 CYLINDER BLOCK GP
S/N 1LS1-457
PART OF 108-3916 CYLINDER BLOCK GP
CYLINDER BLOCK GP
108-3916 CYLINDER BLOCK GP
108-3916 CYLINDER BLOCK GP
S/N 1LS1-457
FIELD REPLACEMENT FOR @@@@@122-9276@@@@@
FIELD INSTALLATION
CYLINDER BLOCK GP
122-9276 CYLINDER BLOCK GP
122-9276 CYLINDER BLOCK GP
S/N 1LS1-457
FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@
CYLINDER BLOCK GP
122-9276 CYLINDER BLOCK GP
122-9276 CYLINDER BLOCK GP
S/N 1LS458-1534
FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@
CYLINDER BLOCK GP
122-9276 CYLINDER BLOCK GP
122-9276 CYLINDER BLOCK GP
S/N 1LS1535-UP
FIELD REPLACEMENT ORDER @@@@@108-3916@@@@@, @@@@@152-7642@@@@@
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
S/N 1LS458-1534
FIELD REPLACEMENT FOR @@@@@122-9276@@@@@
FIELD INSTALLATION
CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
152-7642 CYLINDER BLOCK GP
S/N 1LS1535-UP
FIELD REPLACEMENT FOR @@@@@122-9276@@@@@
FIELD INSTALLATION
CYLINDER BLOCK GP
152-7644 CYLINDER BLOCK GP
152-7644 CYLINDER BLOCK GP
S/N 1LS458-1534
PART OF 152-7642 CYLINDER BLOCK GP
CYLINDER BLOCK GP
152-7646 CYLINDER BLOCK GP
152-7646 CYLINDER BLOCK GP
S/N 1LS458-1534
PART OF 122-9276 CYLINDER BLOCK GP
CYLINDER BLOCK GP
202-1258 CYLINDER BLOCK GP
202-1258 CYLINDER BLOCK GP
S/N 1LS1535-UP
PART OF 122-9276 CYLINDER BLOCK GP
473-9630 KIT-ENGINE CYLINDER REPAIR
473-9630 KIT-ENGINE CYLINDER REPAIR
S/N 1LS1-UP
FOR USE WITH @@@@@131-6596@@@@@, @@@@@131-6597@@@@@, @@@@@131-6598@@@@@, @@@@@204-6203@@@@@
FIELD INSTALLATION
CYLINDER HEAD GP
CYLINDER HEAD GP
110-5095 CYLINDER HEAD GP
110-5095 CYLINDER HEAD GP
S/N 1LS1-UP
ALSO AN ATTACHMENT
CYLINDER HEAD GP
110-5096 CYLINDER HEAD GP
110-5096 CYLINDER HEAD GP
S/N 1LS1-UP
FIELD REPLACEMENT FOR @@@@@110-5099@@@@@
CYLINDER HEAD GP
110-5099 CYLINDER HEAD GP
110-5099 CYLINDER HEAD GP
S/N 1LS1-UP
PART OF 110-5096, 7W-2203 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@110-5096@@@@@
ALSO AN ATTACHMENT
CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
7W-2203 CYLINDER HEAD GP
S/N 1LS1-UP
PART OF 110-5095 CYLINDER HEAD GP
ALSO AN ATTACHMENT
DAMPER GP
DAMPER & PULLEY GP
4P-5894 DAMPER & PULLEY GP
4P-5894 DAMPER & PULLEY GP
S/N 1LS1512-UP
4-GROOVE PULLEY
DAMPER & PULLEY GP
4P-9183 DAMPER & PULLEY GP
4P-9183 DAMPER & PULLEY GP
S/N 1LS1-1782
4 GROOVE PULLEY
DAMPER & PULLEY GP
4P-9198 DAMPER & PULLEY GP
4P-9198 DAMPER & PULLEY GP
S/N 1LS1-UP
PROVIDES VICOUS DAMPER AND SPECIAL ADAPTER
AN ATTACHMENT
GUARD GP-DAMPER
2W-7257 GUARD GP-DAMPER
2W-7257 GUARD GP-DAMPER
S/N 1LS1-UP
FOR USE WHEN NO ACCESSORY IS DRIVEN FROM FRONT OF CRANKSHAFT
CANNOT BE USED WITH @@@@@ 6N-7381@@@@@
AN ATTACHMENT
DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
1N-3970 DRIVE GP-ACCESSORY
1N-3970 DRIVE GP-ACCESSORY
S/N 1LS1-UP
LEFT HAND
AN ATTACHMENT
DRIVE GP-ACCESSORY
4W-3123 DRIVE GP-ACCESSORY
4W-3123 DRIVE GP-ACCESSORY
S/N 1LS1-UP
AIR COMPRESSOR
AN ATTACHMENT
DRIVE GP-ACCESSORY
8N-9653 DRIVE GP-ACCESSORY
8N-9653 DRIVE GP-ACCESSORY
S/N 1LS1-UP
DRIVE GP-AUXILIARY
DRIVE GP-AUXILIARY
1W-0296 DRIVE GP-AUXILIARY
1W-0296 DRIVE GP-AUXILIARY
S/N 1LS1-UP
LH FRONT-REARWARD
AN ATTACHMENT
DRIVE GP-AUXILIARY
1W-6411 DRIVE GP-AUXILIARY
1W-6411 DRIVE GP-AUXILIARY -FRONT, RH
S/N 1LS1-UP
CANNOT BE USED WITH GUARD GP-BELT (RADIATOR FAN)
AN ATTACHMENT
DRIVE GP-AUXILIARY
1W-8582 DRIVE GP-AUXILIARY
1W-8582 DRIVE GP-AUXILIARY
S/N 1LS1-UP
LH FRONT-FORWARD, CAN BE USED ON ENGINES WITH EXPANSION TANK
AN ATTACHMENT
DRIVE GP-FAN
DRIVE GP-FAN
7C-4439 DRIVE GP-FAN
7C-4439 DRIVE GP-FAN
S/N 1LS1-UP
AN ATTACHMENT
DRIVE GP-FAN
7C-4664 DRIVE GP-FAN
7C-4664 DRIVE GP-FAN
S/N 1LS1-UP
BELT
FOR USE WITH 3406 GEN SETS
AN ATTACHMENT
DRIVE GP-FAN
7N-8833 DRIVE GP-FAN
7N-8833 DRIVE GP-FAN
S/N 1LS1-UP
4 GROOVE-10.5 INCH DIAMETER PULLEY-.681 DRIVE RATIO AND BLOWER DRIVE
FOR USAGE REFER TO CHART @@@@@ 4N-6973@@@@@
AN ATTACHMENT
DRIVE GP-FAN
7N-8836 DRIVE GP-FAN
7N-8836 DRIVE GP-FAN
S/N 1LS1-UP
4 GROOVE-254MM DIAMETER PULLEY-.800 DRIVE RATIO AND BLOWER DRIVE
FOR USAGE REFER TO CHART @@@@@ 4N-6973@@@@@
AN ATTACHMENT
DRIVE GP-FAN
7N-8837 DRIVE GP-FAN
7N-8837 DRIVE GP-FAN
S/N 1LS1-UP
4 GROOVE-10.5 INCH DIAMETER PULLEY-.681 DRIVE RATIO AND BLOWER DRIVE
FOR USAGE REFER TO CHART @@@@@ 4N-6973@@@@@
AN ATTACHMENT
DRIVE GP-FAN
7N-8838 DRIVE GP-FAN
7N-8838 DRIVE GP-FAN
S/N 1LS1-UP
3 GROOVE-8.5 INCH DIAMETER-2.5 INCH PILOT-.941 DRIVE RATIO AND BLOWER DRIVE
FOR USAGE REFER TO CHART @@@@@ 4N-6973@@@@@
AN ATTACHMENT
DRIVE GP-FAN
7N-8840 DRIVE GP-FAN
7N-8840 DRIVE GP-FAN
S/N 1LS1-UP
4 GROOVE-254MM DIAMETER PULLEY-.800 DRIVE RATIO AND BLOWER DRIVE
FOR USAGE REFER TO CHART @@@@@ 4N-6973@@@@@
AN ATTACHMENT
DRIVE GP-FAN
7N-8978 DRIVE GP-FAN
7N-8978 DRIVE GP-FAN
S/N 1LS1-UP
4 GROOVE-254MM DIAMETER PULLEY-.800 DRIVE RATIO AND BLOWER DRIVE
FOR USAGE REFER TO CHART @@@@@ 4N-6973@@@@@
AN ATTACHMENT
DRIVE GP-PUMP
DRIVE GP-PUMP
1W-8583 DRIVE GP-PUMP
1W-8583 DRIVE GP-PUMP
S/N 1LS1-UP
HYDRAULIC
AN ATTACHMENT
MOUNTING GP-HYD PUMP DRIVE
2W-7875 MOUNTING GP-HYD PUMP DRIVE
2W-7875 MOUNTING GP-HYD PUMP DRIVE
S/N 1LS1-UP
FOR USE WITH @@@@@ 4P-9198@@@@@
CANNOT BE USED WITH ALTERNATORS, FRONT STUB SHAFT, CRANKSHAFT PULLEY OR GEN SET BASES
AN ATTACHMENT
MOUNTING GP-HYD PUMP DRIVE
4P-5933 MOUNTING GP-HYD PUMP DRIVE
4P-5933 MOUNTING GP-HYD PUMP DRIVE
S/N 1LS1-UP
FOR USE WITH WIDE JOURNAL CRANKSHAFT
CANNOT BE USED WITH GEN SET BASES AND FRONT STUB SHAFT
AN ATTACHMENT
FLYWHEEL GP
FLYWHEEL GP
7N-3060 FLYWHEEL GP
7N-3060 FLYWHEEL GP
S/N 1LS1-UP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
GEAR GP
GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
S/N 1LS1-UP
HOUSING GP-FRONT
1W-1468 HOUSING GP-FRONT
1W-1468 HOUSING GP-FRONT
S/N 1LS1-UP
GUARD GP-BELT
GUARD GP-BELT
116-5516 GUARD GP-BELT
116-5516 GUARD GP-BELT
S/N 1LS1-UP
REQUIRES FRONT ENGINE SUPPORT 9Y1856, COVERS FAN DRIVE AND DAMPER PULLEYS ONLY
FOR USE WITH STANDBY PACKAGE GENERATOR SET
CANNOT BE USED WITH ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
1N-3876 GUARD GP-BELT
1N-3876 GUARD GP-BELT
S/N 1LS1-UP
FOR USE WITH @@@@@ 7W-1340@@@@@, @@@@@ 7C-0755@@@@@
CANNOT BE USED WITH 60-AMPERE ALTERNATORS, BELT GUARDS
AN ATTACHMENT
GUARD GP-BELT
1N-3880 GUARD GP-BELT
1N-3880 GUARD GP-BELT
S/N 1LS1-UP
PROVIDES A PULLEY AND BELT GUARD GROUP FOR STANDARD SIZE ALTERNATOR, FOR USE WITH ENGINES EQUIPPED WITH RADIATOR AND FAN
AN ATTACHMENT
GUARD GP-BELT
200-4289 GUARD GP-BELT
200-4289 GUARD GP-BELT
S/N 1LS1-UP
FOR USE WITH C SIZE RADIATOR
AN ATTACHMENT
GUARD GP-BELT
2W-9664 GUARD GP-BELT
2W-9664 GUARD GP-BELT
S/N 1LS1-UP
FOR USE WITH LH ALTERNATOR
CANNOT BE USED WITH FRONT AUXILIARY DRIVES
AN ATTACHMENT
GUARD GP-BELT
2W-9666 GUARD GP-BELT
2W-9666 GUARD GP-BELT
S/N 1LS1-UP
RADIATOR FAN
CANNOT BE USED WITH FRONT AUXILIARY DRIVES
AN ATTACHMENT
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
4N-4792 COVER GP-FLYWHEEL HOUSING
4N-4792 COVER GP-FLYWHEEL HOUSING
S/N 1LS1-UP
HOUSING GP-FLYWHEEL
106-7410 HOUSING GP-FLYWHEEL
106-7410 HOUSING GP-FLYWHEEL
S/N 1LS1-UP
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
1W-1395 COVER GP-FRONT HOUSING
1W-1395 COVER GP-FRONT HOUSING
S/N 1LS1-UP
FASTENER GP-FRONT HOUSING
4N-6006 FASTENER GP-FRONT HOUSING
4N-6006 FASTENER GP-FRONT HOUSING
S/N 1LS1-UP
GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
8N-9246 GEAR GP-FRONT
S/N 1LS1-UP
HOUSING GP-FRONT
1W-1468 HOUSING GP-FRONT
1W-1468 HOUSING GP-FRONT
S/N 1LS1-UP
LIFTING GP-ENGINE
COVER GP-ENGINE LIFTING EYE
3N-8594 COVER GP-ENGINE LIFTING EYE
3N-8594 COVER GP-ENGINE LIFTING EYE
S/N 1LS1-UP
PART OF 128-5881, 129-1645 BASE GP-ENGINE & GENERATOR, 130-0033 TANK & BASE GP-FUEL
AN ATTACHMENT
LIFTING GP-ENGINE
129-7544 LIFTING GP-ENGINE
129-7544 LIFTING GP-ENGINE
S/N 1LS1-UP
FOR USE WITH ENCLOSURE BASE ONLY
AN ATTACHMENT
LIFTING GP-ENGINE
136-9580 LIFTING GP-ENGINE
136-9580 LIFTING GP-ENGINE
S/N 1LS1-UP
FOR USE WITH SKIDDABLE OR NON-SKIDDABLE FUEL TANK BASE
CANNOT BE USED WITH WEATHERPROOF ENCLOSURE OR SOUND ATTENUATED ENCLOSURE
AN ATTACHMENT
LIFTING GP-ENGINE
4N-1331 LIFTING GP-ENGINE
4N-1331 LIFTING GP-ENGINE
S/N 1LS1-UP
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR
4W-5580 MOUNTING GP-ALTERNATOR
4W-5580 MOUNTING GP-ALTERNATOR
S/N 1LS1-UP
Type 1
FOR USE WITH @@@@@ 6T-1395@@@@@
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
4W-5580 MOUNTING GP-ALTERNATOR
4W-5580 MOUNTING GP-ALTERNATOR
S/N 1LS1-UP
Type 2
FOR USE WITH @@@@@ 6T-1395@@@@@
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
7C-0755 MOUNTING GP-ALTERNATOR
7C-0755 MOUNTING GP-ALTERNATOR
S/N 1LS1-UP
FOR USE WITH LOW SPEED ENGINES ONLY
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
7W-1340 MOUNTING GP-ALTERNATOR
7W-1340 MOUNTING GP-ALTERNATOR
S/N 1LS1-UP
CANNOT BE USED WITH 75 AMPERE ALTERNATOR
AN ATTACHMENT
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE FLEXIBLE
6I-1537 MOUNTING GP-ENGINE FLEXIBLE
6I-1537 MOUNTING GP-ENGINE FLEXIBLE
S/N 1LS1-UP
REQUIRES NEW PRIME GEN SET ENGINE ONLY
AN ATTACHMENT
SUPPORT GP-ENGINE
4N-4286 SUPPORT GP-ENGINE
4N-4286 SUPPORT GP-ENGINE -REAR
S/N 1LS1-UP
FOR USE WITH SAE NO. 0 OR NO. 1 FLYWHEEL HOUSING
AN ATTACHMENT
SUPPORT GP-ENGINE
9Y-1856 SUPPORT GP-ENGINE
9Y-1856 SUPPORT GP-ENGINE -FRONT
S/N 1LS1-UP
ALSO AN ATTACHMENT
PAN GP-OIL
PAN GP-OIL
4N-0756 PAN GP-OIL
4N-0756 PAN GP-OIL -ENGINE
S/N 1LS1-UP
PAN GP-OIL
4W-1873 PAN GP-OIL
4W-1873 PAN GP-OIL -ENGINE
S/N 1LS1-UP
HIGH CAPACITY
PART OF 4W-1880 PAN GP-OIL
FOR USE WITH @@@@@ 4W-1895@@@@@
AN ATTACHMENT
4W-1880 PAN GP-OIL
4W-1880 PAN GP-OIL -ENGINE
S/N 1LS1-UP
HIGH CAPACITY
AN ATTACHMENT
PISTON & ROD GP
473-9630 KIT-ENGINE CYLINDER REPAIR
473-9630 KIT-ENGINE CYLINDER REPAIR
S/N 1LS1-UP
FOR USE WITH @@@@@131-6596@@@@@, @@@@@131-6597@@@@@, @@@@@131-6598@@@@@, @@@@@204-6203@@@@@
FIELD INSTALLATION
PISTON & ROD GP
130-4614 PISTON & ROD GP
130-4614 PISTON & ROD GP
S/N 1LS1-UP
14.6:1 RATIO. JET AS-PISTON EFFECTIVE 4JK471-UP, 3ER3914-UP, 1LS720-UP, 4ZR4875-UP, 41Z3670-UP. FOR ALL OTHER SERIAL NUMBERS, REFER TO CYLINDER BLOCK GP FOR CORRECT JET AS-PISTON.
PULLEY GP
DAMPER & PULLEY GP
4P-5894 DAMPER & PULLEY GP
4P-5894 DAMPER & PULLEY GP
S/N 1LS1512-UP
4-GROOVE PULLEY
DAMPER & PULLEY GP
4P-9183 DAMPER & PULLEY GP
4P-9183 DAMPER & PULLEY GP
S/N 1LS1-1782
4 GROOVE PULLEY
DAMPER & PULLEY GP
4P-9198 DAMPER & PULLEY GP
4P-9198 DAMPER & PULLEY GP
S/N 1LS1-UP
PROVIDES VICOUS DAMPER AND SPECIAL ADAPTER
AN ATTACHMENT
PULLEY GP-AUXILIARY DRIVE
6N-7381 PULLEY GP-AUXILIARY DRIVE
6N-7381 PULLEY GP-AUXILIARY DRIVE
S/N 1LS1-UP
8 INCH DIAMETER
AN ATTACHMENT
PULLEY GP-FAN DRIVE
7C-4746 PULLEY GP-FAN DRIVE
7C-4746 PULLEY GP-FAN DRIVE
S/N 1LS1-UP
.941 RATIO
AN ATTACHMENT
SERPENTINE/V-BELTS
GUARD GP-BELT
116-5516 GUARD GP-BELT
116-5516 GUARD GP-BELT
S/N 1LS1-UP
REQUIRES FRONT ENGINE SUPPORT 9Y1856, COVERS FAN DRIVE AND DAMPER PULLEYS ONLY
FOR USE WITH STANDBY PACKAGE GENERATOR SET
CANNOT BE USED WITH ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
1N-3876 GUARD GP-BELT
1N-3876 GUARD GP-BELT
S/N 1LS1-UP
FOR USE WITH @@@@@ 7W-1340@@@@@, @@@@@ 7C-0755@@@@@
CANNOT BE USED WITH 60-AMPERE ALTERNATORS, BELT GUARDS
AN ATTACHMENT
GUARD GP-BELT
1N-3880 GUARD GP-BELT
1N-3880 GUARD GP-BELT
S/N 1LS1-UP
PROVIDES A PULLEY AND BELT GUARD GROUP FOR STANDARD SIZE ALTERNATOR, FOR USE WITH ENGINES EQUIPPED WITH RADIATOR AND FAN
AN ATTACHMENT
GUARD GP-BELT
200-4289 GUARD GP-BELT
200-4289 GUARD GP-BELT
S/N 1LS1-UP
FOR USE WITH C SIZE RADIATOR
AN ATTACHMENT
GUARD GP-BELT
2W-9664 GUARD GP-BELT
2W-9664 GUARD GP-BELT
S/N 1LS1-UP
FOR USE WITH LH ALTERNATOR
CANNOT BE USED WITH FRONT AUXILIARY DRIVES
AN ATTACHMENT
GUARD GP-BELT
2W-9666 GUARD GP-BELT
2W-9666 GUARD GP-BELT
S/N 1LS1-UP
RADIATOR FAN
CANNOT BE USED WITH FRONT AUXILIARY DRIVES
AN ATTACHMENT
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
4N-4953 COVER GP-VALVE MECHANISM
4N-4953 COVER GP-VALVE MECHANISM
S/N 1LS1-UP
FOR USE WITH AIR LINES FOR REAR EXHAUST TURBO
COVER GP-VALVE MECHANISM
7N-4467 COVER GP-VALVE MECHANISM
7N-4467 COVER GP-VALVE MECHANISM
S/N 1LS1-UP
AN ATTACHMENT
ROCKER ARM GP
4N-1045 ROCKER ARM GP
4N-1045 ROCKER ARM GP
S/N 1LS1-UP
PART OF 4W-2461 VALVE MECHANISM GP
VALVE MECHANISM GP
4W-2461 VALVE MECHANISM GP
4W-2461 VALVE MECHANISM GP -ENGINE
S/N 1LS1-UP
HOUSING GP-REAR
435-1087 KIT-REAR COVER GASKET
435-1087 KIT-REAR COVER GASKET
S/N 1LS1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FIELD INSTALLATION
COVER GP-ENGINE
434-2402 KIT-FRONT COVER GASKET
434-2402 KIT-FRONT COVER GASKET
S/N 1LS1-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER.. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
FIELD REPLACEMENT FOR 233-6728 KIT-GASKET
FIELD INSTALLATION
ENGINE OVERHAUL KIT
481-1221 KIT-ENGINE OVERHAUL
481-1221 KIT-ENGINE OVERHAUL -MAJOR REPAIR
S/N 1LS1-UP
FOR USE WITH @@@@@131-6596@@@@@, @@@@@131-6597@@@@@, @@@@@131-6598@@@@@, @@@@@204-6203@@@@@, 3406 ELECTRIC POWER GENERATOR
FIELD INSTALLATION
491-1474 KIT-ENGINE OVERHAUL
491-1474 KIT-ENGINE OVERHAUL
S/N 1LS1-UP
FIELD INSTALLATION

Information:

(For parts list, see above)

Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Engine News
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Service Magazine
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Specifications
Belt Tension Chart
3406C GENERATOR SET ENGINE
Engine News
Cat<SUP>&reg;</SUP> Reman Has Added Valve Lifters, Rocker Arms, and Camshafts for Certain Engines and Generator Set Engines {1123, 1130, 1209, 1210}
2014/09/05
Specifications
Camshaft
3406C GENERATOR SET ENGINE
Camshaft Bearings
3406C GENERATOR SET ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Camshaft
3406C GENERATOR SET ENGINE
Camshaft Bearings
3406C GENERATOR SET ENGINE
Coupling - Install
SR4 Generator with VR3 or VR4 Voltage Regulator
Coupling - Remove
SR4 Generator with VR3 or VR4 Voltage Regulator
Coupling - Remove
SR4 Generator with VR3 or VR4 Voltage Regulator
Truck Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
Engine News
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/22
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
A New Type of Main Bearing is Now Used {1203}
2005/03/07
Inspection and/or Repair Procedure to Replace Crankshafts on Industrial Engines {1202}
2009/10/28
Use Reuse and Salvage Guidelines for Measurements of Crankshafts which Includes the Crankshaft of the Remanufactured Engine with the Serial Number Prefix 1WW {1202}
2006/10/09
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1202}
2008/09/15
A New Type of Main Bearing is Available {1202, 1203}
2008/09/29
Usability of Main Bearings and Camshaft Bearings {1202, 1203, 1218, 1219}
2008/11/24
Special Instruction
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202}
Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202}
Technical Information Bulletin
NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME
NEW CRANKSHAFT SEALS FOR THE FRONT AND FOR THE REAR ARE NOW IN PRODUCTION BUT ARE NOT AVAILIBLE TO BE OREDERD AT THIS TIME
Specifications
Connecting Rod And Main Bearing Journals
3406C GENERATOR SET ENGINE
Crankshaft
3406C GENERATOR SET ENGINE
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Crankshaft Main Bearings
3406C GENERATOR SET ENGINE
Crankshaft
3406C GENERATOR SET ENGINE
Crankshaft Front Seal &amp; Wear Sleeve
3406C GENERATOR SET ENGINE
Crankshaft Rear Seal &amp; Wear Sleeve
3406C GENERATOR SET ENGINE
Service Magazine
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/14
A New Piston Cooling Jet Assembly Has Been Released {1331}
2006/08/14
Special Instruction
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation of the 3406B and 3406C Long Block Engines
Installation of the 3406B and 3406C Long Block Engines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Technical Information Bulletin
Liner Flange Breakage
Liner Flange Breakage
Specifications
Camshaft Bearings
3406C GENERATOR SET ENGINE
Cylinder Block
3406C GENERATOR SET ENGINE
Cylinder Liners
3406C GENERATOR SET ENGINE
Cylinder Liner Projection
3406C GENERATOR SET ENGINE
Connecting Rod And Main Bearing Journals
3406C GENERATOR SET ENGINE
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Disassembly and Assembly
Spacer Plate
3406C GENERATOR SET ENGINE
Piston Cooling Tubes
3406C GENERATOR SET ENGINE
Camshaft Bearings
3406C GENERATOR SET ENGINE
Crankshaft Main Bearings
3406C GENERATOR SET ENGINE
Cylinder Liners
3406C GENERATOR SET ENGINE
Engine News
Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefixes 1WW, BFF, DLA, BFD, BKY, BLR, ECP, BGE, BKS, BLJ, B1A, BNF and 2MZ {1101, 7754}
2006/04/10
Special Instruction
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Fuel Injection Nozzle And Adapter
3406C GENERATOR SET ENGINE
Valve Rocker Arms, Lifters And Bridges
3406C GENERATOR SET ENGINE
Cylinder Head
3406C GENERATOR SET ENGINE
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Rocker Shaft Assemblies &amp; Push Rods
3406C GENERATOR SET ENGINE
Rocker Shaft Assemblies
3406C GENERATOR SET ENGINE
Valve Lifters
3406C GENERATOR SET ENGINE
Fuel Injection Nozzles &amp; Adapters
3406C GENERATOR SET ENGINE
Cylinder Head Assembly
3406C GENERATOR SET ENGINE
Valves
3406C GENERATOR SET ENGINE
Valve Seat Inserts
3406C GENERATOR SET ENGINE
Bridge Dowels
3406C GENERATOR SET ENGINE
Valve Guides
3406C GENERATOR SET ENGINE
Service Magazine
124-0662 Impact Socket For Removing And Installing Cylinder Head Bolts{1100,0602}
1996/12/09
124-9057 Guide (Swirl) Collar Quickly Installs Valve Guides To Proper Height{1104,0701}
1996/12/09
Engine News
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/22
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Vibration Damper &amp; Pulley
3406C GENERATOR SET ENGINE
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Specifications
Accessory Drive Group
3406C GENERATOR SET ENGINE
Auxiliary Drive
3406C GENERATOR SET ENGINE
Disassembly and Assembly
Accessory Drive
3406C GENERATOR SET ENGINE
Specifications
Accessory Drive Group
3406C GENERATOR SET ENGINE
Auxiliary Drive
3406C GENERATOR SET ENGINE
Disassembly and Assembly
Accessory Drive
3406C GENERATOR SET ENGINE
Fan Drive
3406C GENERATOR SET ENGINE
Engine News
Improved Water Pump Groups Available{1361}
1996/11/01
Specifications
Hydraulic Pump Drive Mounting
3406C GENERATOR SET ENGINE
Disassembly and Assembly
Water Pump
3406C GENERATOR SET ENGINE
Service Magazine
Use 125-9622 Seal Installer To Install 118-9163 Seal In Water Pumps{1361,0708}
1997/01/13
Engine News
Proper Storage Procedures Are Available For Commercial Engines {1000}
Proper Storage Procedures Are Available For Commercial Engines {1000}
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Specifications
Idler Gear Shaft Pilot Bore
3406C GENERATOR SET ENGINE
Idler Gear Assembly (For Front Gear Group)
3406C GENERATOR SET ENGINE
Flywheel Housing Cover
3406C GENERATOR SET ENGINE
Flywheel Housing
3406C GENERATOR SET ENGINE
Flywheel
3406C GENERATOR SET ENGINE
Flywheel Housing Bore
3406C GENERATOR SET ENGINE
Flywheel Housing Runout<BR> Face Runout (Axial Eccentricity) Of The Flywheel Housing:
3406C GENERATOR SET ENGINE
Flywheel Runout
3406C GENERATOR SET ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Disassembly and Assembly
Flywheel
3406C GENERATOR SET ENGINE
Flywheel Housing
3406C GENERATOR SET ENGINE
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Specifications
Front (Timing) Gear Group
3406C GENERATOR SET ENGINE
Idler Gear Shaft Pilot Bore
3406C GENERATOR SET ENGINE
Idler Gear Assembly (For Front Gear Group)
3406C GENERATOR SET ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Disassembly and Assembly
Timing Gear Cover
3406C GENERATOR SET ENGINE
Timing Gears &amp; Plate
3406C GENERATOR SET ENGINE
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Specifications
Flywheel Housing Cover
3406C GENERATOR SET ENGINE
Flywheel Housing
3406C GENERATOR SET ENGINE
Flywheel Housing Bore
3406C GENERATOR SET ENGINE
Flywheel Housing Runout<BR> Face Runout (Axial Eccentricity) Of The Flywheel Housing:
3406C GENERATOR SET ENGINE
Disassembly and Assembly
Flywheel Housing
3406C GENERATOR SET ENGINE
Crankshaft Rear Seal &amp; Wear Sleeve
3406C GENERATOR SET ENGINE
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Specifications
Front Housing And Covers
3406C GENERATOR SET ENGINE
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Timing Gear Cover
3406C GENERATOR SET ENGINE
Timing Gears &amp; Plate
3406C GENERATOR SET ENGINE
Crankshaft Front Seal &amp; Wear Sleeve
3406C GENERATOR SET ENGINE
Engine Front Support
3406C GENERATOR SET ENGINE
Engine News
An Improved Three-Piece Oil Pan Gasket is Now Used {1302, 7555}
2008/01/07
Specifications
Oil Pan
3406C GENERATOR SET ENGINE
Disassembly and Assembly
Oil Pan
3406C GENERATOR SET ENGINE
Engine News
New Optional Two Piece Service Replacement Piston {1214,1331}
1999/11/01
New Guidelines for Inspecting Pistons {1214}
2006/01/02
A New Piston Cooling Jet Assembly Has Been Released {1331}
2006/08/14
Usability of Main Bearings and Camshaft Bearings {1202, 1203, 1218, 1219}
2008/11/24
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Oil Buildup on Remanufactured Cylinder Packs{1225}
Oil Buildup on Remanufactured Cylinder Packs{1225}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Pistons And Rings<BR> Two Piece Articulated Piston
3406C GENERATOR SET ENGINE
Connecting Rods
3406C GENERATOR SET ENGINE
Connecting Rod And Main Bearing Journals
3406C GENERATOR SET ENGINE
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Disassembly and Assembly
Connecting Rod Bearings
3406C GENERATOR SET ENGINE
Crankshaft Main Bearings
3406C GENERATOR SET ENGINE
Pistons &amp; Connecting Rod Assemblies
3406C GENERATOR SET ENGINE
Service Magazine
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13
Engine News
Points To Remember When Replacing A Viscous Crankshaft Damper Assembly With A Rubber Crankshaft Damper Assembly{1205}
1997/01/22
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Fan Drive
3406C GENERATOR SET ENGINE
Vibration Damper &amp; Pulley
3406C GENERATOR SET ENGINE
Engine News
Different Housings are Used on 3400 Remanufactured Engines {1304}
Different Housings are Used on 3400 Remanufactured Engines {1304}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
124-9057 Guide (Swirl) Collar Quickly Installs Valve Guides To Proper Height{1104,0701}
1996/12/09
Use 165-4638 Guide To Install Exhaust Manifold {1059,0701,0702}
1999/08/30
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Engine News
A New Guide Spring for the Camshaft Lifter is Now Used {1102}
2008/03/17
Cat<SUP>&reg;</SUP> Reman Has Added Valve Lifters, Rocker Arms, and Camshafts for Certain Engines and Generator Set Engines {1123, 1130, 1209, 1210}
2014/09/05
Technical Information Bulletin
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
3406C 7E-0329 Valve Cover Base Quality Containment {1107, 1120}
3406C 7E-0329 Valve Cover Base Quality Containment {1107, 1120}
Specifications
Fuel Injection Nozzle And Adapter
3406C GENERATOR SET ENGINE
Valve Covers
3406C GENERATOR SET ENGINE
Valves
3406C GENERATOR SET ENGINE
Valve Rocker Arms, Lifters And Bridges
3406C GENERATOR SET ENGINE
Cylinder Head
3406C GENERATOR SET ENGINE
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Valve Covers
3406C GENERATOR SET ENGINE
Rocker Shaft Assemblies &amp; Push Rods
3406C GENERATOR SET ENGINE
Rocker Shaft Assemblies
3406C GENERATOR SET ENGINE
Valve Lifters
3406C GENERATOR SET ENGINE
Fuel Injection Nozzles &amp; Adapters
3406C GENERATOR SET ENGINE
Cylinder Head Assembly
3406C GENERATOR SET ENGINE
Valves
3406C GENERATOR SET ENGINE
Valve Seat Inserts
3406C GENERATOR SET ENGINE
Bridge Dowels
3406C GENERATOR SET ENGINE
Valve Guides
3406C GENERATOR SET ENGINE
Service Magazine
124-9057 Guide (Swirl) Collar Quickly Installs Valve Guides To Proper Height{1104,0701}
1996/12/09
Engine News
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing{1151,1157,1162}
1996/11/01
Disassembly and Assembly
Flywheel Housing
3406C GENERATOR SET ENGINE
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Truck sale:

Caterpillar 3406C
 
Caterpillar 3406C
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
 
65,000 
Caterpillar 3406C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3406C, Stationary Generator Sets, Construction
43,000 
Caterpillar 3406C, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3406 C, Industrial engines, Construction
42,500 
Caterpillar 3406 C, Industrial engines, Construction
- Industrial engines
RING POWER CORP.
Caterpillar 3406 C, Industrial engines, Construction
59,500 
Caterpillar 3406 C, Industrial engines, Construction
- Industrial engines
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.