AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3Q-9350 BULLDOZER AR-LIFT S/N 2WR1-UP AN ATTACHMENT 12H NA MOTOR GRADER


IMPLEMENTS
BULLDOZER GP
CIRCLE GP
DRAWBAR GP
OPERATOR STATION
AIR CONDITIONER GP

MOTOR GRADER 12H NA MOTOR GRADER 2WR
 12H NA Motor Grader 2WR00001-UP (MACHINE) POWERED BY 3306 Engine SEBP2542 12H NA 2WR   (1996)

IMPLEMENTS

BULLDOZER GP
BULLDOZER AR-LIFT
3Q-9210 BULLDOZER AR-LIFT
BULLDOZER AR-LIFT
3Q-9350 BULLDOZER AR-LIFT
BULLDOZER AR-LIFT & TILT
3Q-9211 BULLDOZER AR-LIFT & TILT
BULLDOZER AR-LIFT & TILT
3Q-9351 BULLDOZER AR-LIFT & TILT
 

#SEBP25420480
 

3Q-9350: BULLDOZER AR-LIFT

3Q-9350 BULLDOZER AR-LIFT
S/N 2WR1-UP
AN ATTACHMENT
i01918959 SEBP2542
3Q9350 BULLDOZER AR-LIFT Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 140-5489 [2] LINK AS (UPPER)  
2. 140-5492 [1] LINK AS (LOWER)  
3. [1] BLADE AS (LIFT)  
3A. [1] PLATE AS  
3B. [3] BRACKET AS (LH)  
3C. [3] BRACKET AS (RH)  
3D. [2] BRACKET AS (LH)  
3E. [2] BRACKET AS (RH)  
3F. [1] BLADE AS  
3G. 3G-5596 [2] LUG  
4. 152-6485 Y [1] CYLINDER GP-HYDRAULIC (FRONT BLADE)  
5. 2K-6413 [2] PIN  
6. 140-5491 [1] PLATE AS  
6A. 3G-5596 [1] LUG  
6B. 9D-6164 [1] BOSS (3/8-16X1.44-IN)  
6C. [1] BRACKET AS (RH)  
6D. [1] BRACKET AS (LH)  
6E. [1] BRACKET AS (RH)  
6F. [1] BRACKET AS (LH)  
6G. [1] BRACKET AS (LH)  
6H. [1] BRACKET AS (RH)  
7. 1K-6872 [10] LOCKNUT (1/2-13-THD)  
8. 3Q-8469 [2] SHACKLE  
9. 3Q-8848 CHAIN (22 LINKS)  
10. 7X-0370 [12] BOLT (3/4-10X3.5-IN)  
11. 6V-8182 [12] NUT (3/4-10-THD)  
12. 5P-6652 [12] WASHER (20X44.5X6-MM THK)  
13. Y [1] CONTROL GP-BULLDOZER HYDRAULIC (FRONT BLADE LIFT)  
14. 4K-3150 [8] PIN  
15. 7X-0331 [2] BOLT (1/2-13X4.25-IN)  
16. [1] PLATE  
17. 5S-7379 [3] BOLT (3/8-16X0.875-IN)  
18. 5P-1075 [3] WASHER-HARD (10.2X22.5X3-MM THK)  
19. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
20. 4T-6229 [2] BIT-END  
21. 6Y-5841 [2] EDGE-CUTTING  
22. 4F-3654 [18] BOLT-PLOW (5/8-11X2-IN)  
23. 4K-0367 [18] NUT-FULL (5/8-11-THD)  
24. 150-9661 [2] PLATE-WARNING (KEEP CLEAR OF PUSH BLADE)  
25. 150-9662 [2] PLATE-WARNING (SAFTY CHAIN ENGAGEMENT)  
26. 3G-2579 [8] BEARING  
27. 7K-9203 [16] SEAL-LIP TYPE  
28. 8T-9530 [16] TACK (METAL)  
29. 7X-0292 [8] BOLT (3/8-16X4.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP25420481
 

3Q-9211: BULLDOZER AR-LIFT & TILT

3Q-9211 BULLDOZER AR-LIFT & TILT
S/N 2WR566-UP
AN ATTACHMENT
i00664829 SEBP2542
3Q9211 BULLDOZER AR-LIFT & TILT Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1V-6185 [8] PIN  
2. 8T-9378 [10] BOLT (3/8-16X4-IN)  
3. 7K-9348 [2] PIN  
4. 3Q-8469 [2] SHACKLE  
5. 3Q-8848 B CHAIN  
6. 3Q-8386 [2] PLATE-KEEPER  
7. 3Q-8422 [2] PLATE-SPACER  
8. 8T-9389 [18] BOLT (1/2-13X2.75-IN)  
9. 8T-4223 [18] WASHER-HARD (13.5X25.5X3-MM THK)  
10. Y [1] CYLINDER GP-TILT  
11. 8F-4102 [2] PLATE-SEAL  
12. 3Q-8427 [2] BOLT  
13. 3Q-8416 Y [1] CYLINDER GP-LIFT (BLADE)  
14. 3Q-8426 [2] SPACER (32.5X45X15-MM)  
15. [1] PLATE AS  
16. 3Q-9249 [2] LINK AS-UPPER  
17. [1] LINK AS-LOWER  
18. 3Q-8936 [1] PLATE AS-SWIVEL  
19. 3Q-8937 [1] BLADE AS  
20. 7X-0368 [12] BOLT (3/4-10X3-IN)  
21. 1B-4331 [12] NUT (3/4-10-THD)  
22. 5P-6652 [12] WASHER (20X44.5X6-MM THK)  
23. 5L-4027 [22] WASHER (1.52-MM THK)  
24. 2K-4973 [10] LOCKNUT (3/8-16-THD)  
25. 4F-3654 [18] BOLT-PLOW (5/8-11X2-IN)  
26. 4K-0367 [18] NUT-FULL (5/8-11-THD)  
27. 6Y-5841 [2] EDGE-CUTTING  
28. 4T-6229 [2] BIT-END  
29. 3J-6575 [1] BEARING  
30. 2J-0851 [2] CAP-BEARING  
31. 8E-9211 [10] SHIM (0.8-MM THK)  
32. 3B-8485 [1] ELBOW  
33. 3B-4897 [20] WASHER (1.531X2.875X0.049-IN THK)  
34. 2D-4867 [8] FITTING-GREASE (1/8-27 PTF)  
36. 6F-5282 [4] BOLT (1/2-13X5.25-IN)  
37. 8T-9399 [4] BOLT (3/4-10X2.25-IN)  
38. 8T-4994 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
39. [1] PLATE  
40. 9D-6164 [1] BOSS (3/8-16X1.44-IN)  
   
  FY [1] CONTROL GP-BULLDOZER HYDRAULIC  
  B   USE AS REQUIRED
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP25420482
 

3Q-9351: BULLDOZER AR-LIFT & TILT

3Q-9351 BULLDOZER AR-LIFT & TILT
S/N 2WR1-UP
AN ATTACHMENT
i01919059 SEBP2542
3Q9351 BULLDOZER AR-LIFT & TILT Parts scheme 3Q9351 BULLDOZER AR-LIFT & TILT Parts scheme 3Q9351 BULLDOZER AR-LIFT & TILT Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 140-5489 [1] LINK AS (UPPER)  
2. 140-5492 [1] LINK AS (LOWER)  
3. 3Q-8937 [1] BLADE AS  
3A. [1] BEARING  
  3G-5596 [2] LUG  
4. 152-6485 Y [1] CYLINDER GP-HYDRAULIC (FRONT BLADE)  
5. 2K-6413 [2] PIN  
6. 140-5491 [1] PLATE AS  
6A. 3G-5596 [1] LUG  
6B. 9D-6164 [1] BOSS (3/8-16X1.44-IN)  
6C. [1] BRACKET AS (RH)  
6D. [1] BRACKET AS (LH)  
6E. [1] BRACKET AS (RH)  
6F. [1] BRACKET AS (LH)  
6G. [1] BRACKET AS (LH)  
6H. [1] BRACKET AS (RH)  
7. 1K-6872 [10] LOCKNUT (1/2-13-THD)  
8. 3Q-8469 [2] SHACKLE  
9. 3Q-8848 CHAIN (22 LINKS)  
10. 7X-0370 [12] BOLT (3/4-10X3.5-IN)  
11. 6V-8182 [12] NUT (3/4-10-THD)  
12. 5P-6652 [12] WASHER (20X44.5X6-MM THK)  
13. Y [1] CONTROL GP-BULLDOZER HYDRAULIC (BLADE LIFT & TILT)  
14. 4K-3150 [8] PIN  
15. 7X-0331 [10] BOLT (1/2-13X4.25-IN)  
16. [1] PLATE  
17. 5S-7379 [2] BOLT (3/8-16X0.875-IN)  
18. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
19. 8T-4994 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
20. 4T-6229 [2] BIT-END  
21. 6Y-5841 [2] EDGE-CUTTING  
22. 4F-3654 [18] BOLT-PLOW (5/8-11X2-IN)  
23. 4K-0367 [18] NUT-FULL (5/8-11-THD)  
24. 150-9661 [2] PLATE-WARNING (KEEP CLEAR OF PUSH BLADE)  
25. 150-9662 [2] PLATE-WARNING (SAFTY CHAIN ENGAGEMENT)  
26. 3G-2579 [8] BEARING  
27. 7K-9203 [16] SEAL-LIP TYPE  
28. 8T-9530 [16] TACK (METAL)  
29. 3Q-9249 [1] LINK AS-UPPER  
  9D-6164 F [2] BOSS (3/8-16X1.44-IN)  
  140-5489 [1] LINK AS (UPPER)  
  F [2] BOSS  
30. 3Q-8936 [1] PLATE AS-SWIVEL  
30A. [3] BRACKET AS (LH)  
30B. [3] BRACKET AS (RH)  
30C. [2] BRACKET AS (LH)  
30D. [2] BRACKET AS (RH)  
31. 3Q-8386 [2] PLATE-KEEPER  
32. 3Q-8422 [2] PLATE-SPACER  
33. 8T-9389 [14] BOLT (1/2-13X2.75-IN)  
34. 8T-8919 [4] BOLT (1/2-13X1.75-IN)  
35. 8T-4223 [22] WASHER-HARD (13.5X25.5X3-MM THK)  
36. Y [1] CYLINDER GP-TILT (FRONT BLADE)  
37. 3Q-8426 [2] SPACER (32.5X45X15-MM)  
38. 3Q-8427 [2] BOLT  
39. 8F-4102 [2] PLATE-SEAL  
40. 160-6301 [1] CAP-BEARING  
  8E-9211 B [14] SHIM (0.8-MM THK)  
41. 8E-9211 B [20] SHIM (0.8-MM THK)  
42. 3B-8485 [1] ELBOW (BLADE TILT PIVOT)  
43. 3J-6575 [1] BEARING  
44. 7X-0326 [4] BOLT (1/2-13X3-IN)  
45. 5L-4027 [14] WASHER (1.52-MM THK)  
46. 8T-9399 [4] BOLT (3/4-10X2.25-IN)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP25420483
 

112-7485: CIRCLE GP

112-7485 CIRCLE GP
S/N 2WR1-UP
PART OF 112-7486 CIRCLE GP
i00125015 SEBP2542
1127485 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-3971 [1] BRACKET AS  
2. 6G-2946 [2] STOP  
3. 132-2029 [1] BEAM-BLADE  
4. 8D-9883 [1] GUSSET  
5. 8D-9886 [1] BRACE  
6. 5T-3889 [1] BRACE  
7. 132-1340 [1] BRACE AS  
  2A-7089 [2] BUSHING  
8. 5T-3890 [1] BRACE  
9. 4D-4375 [2] LUG  
10. 8D-9884 [1] GUSSET  
11. 8D-9882 [2] BLOCK-FILLER  
12. 132-2038 [1] BEAM-BLADE  
13. 8D-9887 [1] BRACE  
  5T-4267 AF [1] SEGMENT-CIRCLE  
    (4 TEETH - SERVICE REPAIR FOR WORN OR DAMAGED TEETH
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
 

#SEBP25420484
 

112-7486: CIRCLE GP

112-7486 CIRCLE GP
S/N 2WR1-673
PART OF 2C-9635 BLADE AR
i00125016 SEBP2542
1127486 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-4139 [8] SPACER (18.85X26.67X78-MM THK)  
2. 7X-0550 [8] WASHER-HARD (13.5X32X5-MM THK)  
3. 112-5060 [1] BRACKET AS  
  104-8655 [1] BUSHING  
4. 2B-2673 [2] NUT-CASTLE (1-3/4-5-THD)  
5. 6G-2947 [1] SHAFT  
6. 5P-8245 [30] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6H-1717 [30] BOLT (1/2-13X1.125-IN)  
8. 8W-1749 [10] PLATE  
9. 1D-0503 [2] WASHER (45.25X76.2X6.35-MM THK)  
10. 3B-5320 [2] PIN-COTTER  
11. 112-5061 [1] BRACKET AS  
  104-8655 [1] BUSHING  
12. 8W-5229 [1] GUARD  
13. 8W-5231 [1] GUARD  
14. 8W-1751 [1] BRACKET AS  
15. 8S-9092 [2] BOLT (5/8-11X2.25-IN)  
16. 5P-8247 [4] WASHER-HARD (17X32X3.5-MM THK)  
17. 1A-8537 [2] BOLT (5/8-11X2.75-IN)  
18. 5T-8367 [1] STRIP-WEAR  
19. 5T-8366 [4] STRIP-WEAR  
20. 5D-6644 [10] SHIM (0.762-MM THK)  
21. 7X-0452 [4] NUT-FULL (1-1/2-6-THD)  
22. 7X-0334 [8] BOLT (1/2-13X5-IN)  
23. 105-2080 [4] BRACKET AS  
    (EACH INCLUDES)
24. 1F-0748 [2] NUT-WELD (1/2-13-THD)  
25. 2G-3219 B [5] SHIM (0.8-MM THK)  
26. 2G-3221 B [5] SHIM (1.6-MM THK)  
27. 2K-0419 [4] WASHER (0.766X3.5X0.065-IN THK)  
28. 112-7485 Y [1] CIRCLE GP  
29. 8D-5949 [1] BAR-SPREADER  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP25420485
 

112-7486: CIRCLE GP

112-7486 CIRCLE GP
S/N 2WR674-UP
PART OF 2C-9635 BLADE AR
i01114284 SEBP2542
1127486 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-0503 [2] WASHER (45.25X76.2X6.35-MM THK)  
2. 2G-3219 B [5] SHIM (0.8-MM THK)  
3. 2G-3221 B [5] SHIM (1.6-MM THK)  
4. 2K-0419 B [4] WASHER (0.766X3.5X0.065-IN THK)  
5. 5D-6644 B [10] SHIM (0.762-MM THK)  
6. 5T-8366 [4] STRIP-WEAR  
7. 5T-8367 [1] STRIP-WEAR  
8. 8D-5949 [1] BAR-SPREADER  
9. 8W-1749 [10] PLATE  
10. 8W-5229 [1] GUARD  
11. 8W-5231 [1] GUARD  
12. 102-4139 [8] SPACER (18.85X26.67X78-MM THK)  
13. 112-5060 [1] BRACKET AS  
  104-8655 [1] BUSHING  
14. 112-5061 [1] BRACKET AS  
  104-8655 [1] BUSHING  
15. 153-3580 [1] SHAFT  
16. 105-2080 [4] BRACKET AS  
    (EACH INCLUDES)
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
17. 153-9360 Y [1] CIRCLE GP  
18. 2B-2673 [2] NUT-CASTLE (1-3/4-5-THD)  
19. 3B-5320 [2] PIN-COTTER  
20. 5P-8245 [30] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 6H-1717 [30] BOLT (1/2-13X1.125-IN)  
22. 7X-0334 [8] BOLT (1/2-13X5-IN)  
23. 7X-0452 [4] NUT-FULL (1-1/2-6-THD)  
24. 7X-0550 [8] WASHER-HARD (13.5X32X5-MM THK)  
25. 2C-9780 [1] BRACKET AS  
25A. 5P-8247 [4] WASHER-HARD (17X32X3.5-MM THK)  
25B. 9X-8881 [2] BOLT (5/8-11X2.25-IN)  
25C. 9X-8883 [2] BOLT (5/8-11X2.75-IN)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP25420486
 

153-9360: CIRCLE GP

153-9360 CIRCLE GP
S/N 2WR1-UP
PART OF 112-7486 CIRCLE GP
i00947766 SEBP2542
1539360 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 2G-3971 [1] BRACKET AS  
3. 4D-4375 [2] LUG  
5. 5T-3889 [1] BRACE  
6. 5T-3890 [1] BRACE  
7. 6G-2946 [2] STOP  
9. 8D-9882 [2] BLOCK-FILLER  
10. 8D-9886 [1] BRACE  
11. 8D-9887 [1] BRACE  
13. 132-1340 [1] BRACE AS  
  2A-7089 [2] BUSHING  
14. 147-6143 [1] PLATE (LH)  
15. 147-6144 [1] PLATE (RH)  
16. 153-0185 [1] BEAM-BLADE  
17. 153-0187 [1] BEAM-BLADE  
18. 5T-4267 A [1] SEGMENT-CIRCLE  
    (4 TEETH - SERVICE REPAIR FOR WORN OR DAMAGED TEETH)
  A   NOT PART OF THIS GROUP
 

#SEBP25420487
 

2C-9549: DRAWBAR GP

2C-9549 DRAWBAR GP
S/N 2WR1-UP
PART OF 2C-9635 BLADE AR
i00124579 SEBP2542
2C9549 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-1322 [4] BOLT (7/8-9X6-IN)  
2. 6G-1915 B [36] SHIM (0.25-MM THK)  
3. [1] DRAWBAR & YOKE AS  
3A. 178-3086 [3] STUD-BALL  
3B. 5D-2643 [8] LUG  
3C. 8X-7956 [1] SHAFT AS  
3D. 5T-6775 [2] REINFORCEMENT  
3E. 167-0373 [2] PLATE  
4. 6G-5442 [1] BALL  
5. 8X-8406 [1] CAP  
6. 8X-8409 B [4] SHIM (0.8-MM THK)  
7. 8X-8408 B [6] SHIM (0.25-MM THK)  
8. 8X-8407 [1] ADAPTER  
9. 5P-8291 [5] BOLT (3/4-16X2-IN)  
10. 2H-3764 [2] BOLT-SOCKET HEAD (1/4-20X1.5-IN)  
11. 9H-1031 [4] WASHER-HARD (24X41.5X6-MM THK)  
12. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(DRAWBAR)  
13. 6G-4526 [6] SHOE-CIRCLE GUIDE  
14. 4B-3604 [12] SETSCREW-SQUARE HEAD (3/4-10X2.5-IN)  
15. 1D-5119 [12] NUT (3/4-10-THD)  
16. 6G-1914 B [54] SHIM (0.76-MM THK)  
17. 128-9654 [11] STRIP-WEAR  
18. 128-9656 [6] STRIP-WEAR  
19. 5P-6652 [18] WASHER (20X44.5X6-MM THK)  
20. 3B-6753 [18] BOLT (3/4-10X4.75-IN)  
21. 153-7383 B [1] SHIM (0.12-MM THK)  
  B   USE AS REQUIRED
 

#SEBP25420488
 

8X-1960: DRAWBAR GP

8X-1960 DRAWBAR GP
S/N 2WR1-UP
PART OF 2C-9616, 2C-9695 SCARIFIER AR
AN ATTACHMENT
i00660346 SEBP2542
8X1960 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-1322 [4] BOLT (7/8-9X6-IN)  
2. 6G-1915 B [36] SHIM (0.25-MM THK)  
3. 8X-7951 [1] DRAWBAR & YOKE AS  
3A. 178-3086 [3] STUD-BALL  
3B. 8F-9836 [12] BOSS (3/8-16-THD)  
3C. 8X-7956 [1] SHAFT AS  
3D. 123-7707 [2] PLATE  
4. 6G-5442 [1] BALL  
5. 8X-8406 [1] CAP  
6. 8X-8409 B [4] SHIM (0.8-MM THK)  
7. 8X-8408 B [6] SHIM (0.25-MM THK)  
8. 8X-8407 [1] ADAPTER  
9. 5P-8291 [5] BOLT (3/4-16X2-IN)  
10. 2H-3764 [2] BOLT-SOCKET HEAD (1/4-20X1.5-IN)  
11. 9H-1031 [4] WASHER-HARD (24X41.5X6-MM THK)  
12. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(DRAWBAR)  
13. 6G-4526 [6] SHOE-CIRCLE GUIDE  
14. 4B-3604 [12] SETSCREW-SQUARE HEAD (3/4-10X2.5-IN)  
15. 1D-5119 [12] NUT (3/4-10-THD)  
16. 6G-1914 B [54] SHIM (0.76-MM THK)  
17. 128-9654 [11] STRIP-WEAR  
18. 128-9656 [6] STRIP-WEAR  
19. 5P-6652 [18] WASHER (20X44.5X6-MM THK)  
20. 3B-6753 [18] BOLT (3/4-10X4.75-IN)  
21. 153-7383 B [1] SHIM (0.12-MM THK)  
  B   USE AS REQUIRED
 

#SEBP25420489
 

8W-7646: AIR CONDITIONER & MOUNTING GP

8W-7646 AIR CONDITIONER & MOUNTING GP
S/N 2WR1-UP
PART OF 8W-7645 AIR CONDITIONER AR
i00124855 SEBP2542
  For full view, you need register

Parts for your 12H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8C-9788 Y [1] AIR CONDITIONER GP  
  5M-3062 [1] BOLT (3/8-16X0.75-IN)  
  8M-2773 [2] CLIP (LOOP)  
  8M-8948 [1] FUSE (15-AMPERE)  
  123-0871 [1] PAD (420MM X 356MM)  
  123-0872 [1] PAD (1035MM X 150MM)  
  8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 12H NA :

BULLDOZER AR-LIFT
3Q-9210 BULLDOZER AR-LIFT
VALVE GP-SOLENOID
8T-8808 VALVE GP-SOLENOID
VALVE GP-SOLENOID
6T-8046 VALVE GP-SOLENOID
VALVE GP-SHUTTLE
4T-1860 VALVE GP-SHUTTLE
VALVE GP-RELIEF
6E-4704 VALVE GP-RELIEF
VALVE GP-RELIEF
6E-4703 VALVE GP-RELIEF
6E-3033 VALVE GP-RELIEF
VALVE GP-RELIEF
4T-4935 VALVE GP-RELIEF
BULLDOZER AR-LIFT & TILT
3Q-9211 BULLDOZER AR-LIFT & TILT
BULLDOZER AR-LIFT & TILT
3Q-9351 BULLDOZER AR-LIFT & TILT
CIRCLE GP
112-7485 CIRCLE GP
CIRCLE GP
112-7486 CIRCLE GP
CIRCLE GP
112-7486 CIRCLE GP
CIRCLE GP
153-9360 CIRCLE GP
DRAWBAR GP
2C-9549 DRAWBAR GP
DRAWBAR GP
8X-1960 DRAWBAR GP

Truck sale:

Caterpillar 12HNA, Construction
On Request 
Caterpillar 12HNA, Construction
- motor graders
WILLIAM ADAMS PTY. LTD.
Australia
Caterpillar 12HNA, Construction
96,997 USD 
Caterpillar 12HNA, Construction
- motor graders
WESTRAC
Western Australia, Australia
Caterpillar 12HNA, Construction
62,500 
Caterpillar 12HNA, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
Caterpillar 12HNA, Construction
69,800 
Caterpillar 12HNA, Construction
- motor graders
YANCEY BROS. CO.
GA
CATERPILLAR 12HNA 2007
 
CATERPILLAR 12HNA 2007
- MOTOR GRADERS
HASTINGS DEERING (AUSTRALIA) LTD.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.