AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GPMANIFOLD GP-EXHAUST
TURBOCHARGER GP
LINES GP-AIR
MANIFOLD GP-EXHAUST
MUFFLER GP
TURBOCHARGER GP
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
#SEBP25430090
113-8513: DUST EJECTOR GP
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
#SEBP25430091
7E-5682: FASTENER GP-EXHAUST MANIFOLD
7E-5682 FASTENER GP-EXHAUST MANIFOLD
S/N 6NC1-UP; 08Z87550-99999
PART OF 111-8003, 116-7578, 146-4337 ENGINE AR
S/N 6NC1-UP; 08Z87550-99999
PART OF 111-8003, 116-7578, 146-4337 ENGINE AR
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2N-2766 | [12] | LOCKNUT (3/8-16-THD) | |
| 2. | 8M-7145 | [11] | WASHER (10.2X28.5X5-MM THK) | |
| 3. | 6V-1426 | [9] | STUD-TAPERLOCK (3/8-16X2.75-IN, HIGH TEMP) | |
| 4. | 6V-1427 | [2] | STUD-TAPERLOCK (3/8-16X3.54-IN) | |
| 5. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 6. | 1M-7643 | [1] | SPACER (10.5X25.4X18.21-MM THK) | |
| 7. | 6B-7469 | [1] | SPACER (0.406X0.875X0.875-IN THK) | |
| 8. | 106-1793 | [1] | STUD-TAPERLOCK (3/8-16X2.36-IN) | |
| 9. | 9M-6527 | [1] | WASHER-HARD (10.2X25.5X5-MM THK) | |
| 10. | 7E-9301 | [1] | SHIELD-HEAT |
#SEBP25430092
391-8205: KIT-TURBOCHARGER GASKET
391-8205 KIT-TURBOCHARGER GASKET
S/N 9ZN1-UP
KIT CONTAINS GASKETS AND SEALS TO INSTALL THE TURBOCHARGER AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTINGS HARDWARE
FOR USE WITH @@@@@111-8003@@@@@, @@@@@116-7578@@@@@
FIELD INSTALLATION
S/N 9ZN1-UP
KIT CONTAINS GASKETS AND SEALS TO INSTALL THE TURBOCHARGER AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTINGS HARDWARE
FOR USE WITH @@@@@111-8003@@@@@, @@@@@116-7578@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8M-2295 | [4] | BOLT (3/8-16X1.625-IN) | ||
| 1P-0451 | [1] | GASKET | ||
| 4M-6480 | [1] | GASKET | ||
| 8H-9788 | [1] | GASKET | ||
| 188-6126 | [1] | GASKET | ||
| 1S-4295 | [1] | GASKET (TURBOCHARGER) | ||
| 9S-7083 | [1] | GASKET-INLET | ||
| 1S-4810 | [1] | GASKET-OIL DRAIN | ||
| 1S-6595 | [1] | GASKET-OIL SUPPLY | ||
| 2N-2766 | [4] | LOCKNUT (3/8-16-THD) | ||
| 6N-0009 | [1] | RING-METAL SEAL | ||
| 6N-0992 | [1] | RING-METAL SEAL | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 5H-7704 | [2] | SEAL-O-RING | ||
| 9M-4849 | [1] | SEAL-O-RING | ||
| 4L-8337 | [2] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP25430093
513-5256: KIT-TURBOCHARGER GASKET
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7L-6443 | [2] | BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN) | ||
| 9L-2295 | [2] | BOLT-HIGH TEMPERATURE (3/8-16X1.5-IN) | ||
| 1P-0451 | [1] | GASKET | ||
| 2F-7761 | [1] | GASKET | ||
| 188-6126 | [1] | GASKET | ||
| 9S-7083 | [1] | GASKET-INLET | ||
| 391-2167 | [4] | LOCKNUT-FLANGE (3/8X16-THD) | ||
| 3K-0360 | [2] | SEAL-O-RING | ||
| 5H-7704 | [2] | SEAL-O-RING | ||
| 9M-4849 | [1] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP25430094
110-0020: LINES GP-AIR
110-0020 LINES GP-AIR
S/N 6NC1-UP; 08Z87550-99999
PART OF 111-8003, 116-7578, 146-4337 ENGINE AR
S/N 6NC1-UP; 08Z87550-99999
PART OF 111-8003, 116-7578, 146-4337 ENGINE AR
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 106-3392 | [1] | TUBE-AIR | |
| 2. | 5H-7704 | [2] | SEAL-O-RING | |
| 3. | 7W-1945 | [2] | RETAINER | |
| 4. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 5. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 6. | 2N-1287 | [1] | ELBOW-FLARED | |
| 7. | 5S-0003 B | [1] | NUT (5/16-18-THD) | |
| 8. | 9M-1974 B | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 10. | 0S-1618 B | [1] | BOLT (5/16-18X1-IN) | |
| 11. | 110-0019 | [1] | PIPE | |
| 12. | 3J-7352 | [1] | CONNECTOR | |
| 13. | 3J-7354 | [1] | SEAL-O-RING | |
| 14. | 2B-2404 | [1] | CLIP | |
| 15. | 8A-8563 | [1] | SPACER (8.6X20X10-MM THK) | |
| 16. | 4B-3388 | [1] | BOLT (5/16-18X1.125-IN) | |
| 17. | 4N-9216 | [1] | HOSE-AIR | |
| 18. | 5P-0597 | [2] | CLAMP-HOSE | |
| 19. | 110-0018 | [1] | TUBE AS | |
| 20. | 1A-2029 | [9] | BOLT (3/8-16X1.125-IN) | |
| 21. | 5S-6735 | [1] | GASKET | |
| 22. | 9S-7083 | [1] | GASKET-INLET | |
| 23. | 5F-4899 | [1] | BOLT (3/8-16X5.5-IN) | |
| 24. | 110-0016 | [1] | SUPPORT-AIR CLEANER | |
| 25. | 3K-1290 B | [1] | CLIP | |
| B | USE AS REQUIRED | |||
#SEBP25430095
111-8007: LINES GP-AIR
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 106-3392 | [1] | TUBE-AIR | |
| 2. | 5H-7704 | [2] | SEAL-O-RING | |
| 3. | 7W-1945 | [2] | RETAINER | |
| 4. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 5. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 6. | 8T-6764 | [1] | PLUG-PIPE (1/8-27-THD) | |
| 7. | 110-0019 | [1] | PIPE | |
| 8. | 4N-9216 | [1] | HOSE-AIR | |
| 9. | 5P-0597 | [2] | CLAMP-HOSE | |
| 10. | 1A-2029 | [9] | BOLT (3/8-16X1.125-IN) | |
| 11. | 5S-6735 | [1] | GASKET | |
| 12. | 9S-7083 | [1] | GASKET-INLET | |
| 13. | 5F-4899 | [1] | BOLT (3/8-16X5.5-IN) | |
| 14. | 110-0016 | [1] | SUPPORT-AIR CLEANER |
#SEBP25430096
7C-2094: LINES GP-AIR
For full view, you need register
#SEBP25430097
6N-0164: MANIFOLD GP-EXHAUST
6N-0164 MANIFOLD GP-EXHAUST
S/N 6NC1-UP; 08Z87550-99999
PART OF 111-8003, 116-7578, 146-4337 ENGINE AR
S/N 6NC1-UP; 08Z87550-99999
PART OF 111-8003, 116-7578, 146-4337 ENGINE AR
For full view, you need register
#SEBP25430098
113-8511: MUFFLER & MOUNTING GP
113-8511 MUFFLER & MOUNTING GP
S/N 9ZN1-UP
PART OF 112-5836 INSTALLATION AR-ENGINE
S/N 9ZN1-UP
PART OF 112-5836 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7C-5134 | [1] | SUPPORT | |
| 2. | 7E-8454 | [1] | BRACKET | |
| 3. | 262-2757 | [1] | MUFFLER | |
| 4. | 8T-8917 | [2] | BOLT (1/2-13X1.25-IN) | |
| 5. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 6. | 4L-9337 | [2] | BOLT (3/8-16X1.5-IN) | |
| 7. | 5P-1075 | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 8. | 1B-5355 | [2] | NUT-FULL (3/8-16-THD) | |
| 9. | 8T-2502 | [4] | BOLT (3/8-16X1.125-IN) |
#SEBP25430099
113-5340: TURBOCHARGER GP
113-5340 TURBOCHARGER GP
S/N 6NC1-21676; 08Z87550-99999
PART OF 111-8003, 116-7578, 146-4337 ENGINE AR
S/N 6NC1-21676; 08Z87550-99999
PART OF 111-8003, 116-7578, 146-4337 ENGINE AR
For full view, you need register
Parts for your 140H NA MOTOR GRADER:
Information:
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
Special Instruction
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Reuse And Salvage Guidelines
